Message ID | 1326740477-21576-1-git-send-email-fabio.estevam@freescale.com |
---|---|
State | New |
Headers | show |
On Mon, Jan 16, 2012 at 5:01 PM, Fabio Estevam <fabio.estevam@freescale.com> wrote: > From: Fabio Estevam <festevam@gmail.com> > > Selecting audio on a mx28evk the saif driver was failing: > > [ 0.660000] saif0_clk_set_rate: divider writing timeout > [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 > [ 0.670000] ALSA device list: > [ 0.680000] No soundcards found. > > The timeout on saif0_clk_set_rate was due to the wrong condition for the end of loop. > > After fixing it, the audio driver can be correctly probed and becomes functional. > > While at it, fix the other locations where the similar issue occurs. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Please disregard this version.
> From: Fabio Estevam <festevam@gmail.com> > > Selecting audio on a mx28evk the saif driver was failing: > > [ 0.660000] saif0_clk_set_rate: divider writing timeout > [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 > [ 0.670000] ALSA device list: > [ 0.680000] No soundcards found. > > The timeout on saif0_clk_set_rate was due to the wrong condition for the > end of loop. > > After fixing it, the audio driver can be correctly probed and becomes > functional. > > While at it, fix the other locations where the similar issue occurs. What? The patch doesn't make sense. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > arch/arm/mach-mxs/clock-mx28.c | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-mxs/clock-mx28.c > b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..ee9e04b 100644 > --- a/arch/arm/mach-mxs/clock-mx28.c > +++ b/arch/arm/mach-mxs/clock-mx28.c > @@ -396,7 +396,7 @@ static int name##_set_rate(struct clk *clk, unsigned > long rate) \ } \ > __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ > \ > - for (i = 10000; i; i--) \ > + for (i = 10000; i < 0; i--) \ > if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ > HW_CLKCTRL_##dr) & bm_busy)) \ > break; \ > @@ -439,7 +439,7 @@ static int name##_set_rate(struct clk *clk, unsigned > long rate) \ } \ > __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ > \ > - for (i = 10000; i; i--) \ > + for (i = 10000; i < 0; i--) \ > if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ > HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ > break; \ > @@ -479,7 +479,7 @@ static int name##_set_rate(struct clk *clk, unsigned > long rate) \ reg |= div << BP_CLKCTRL_##rs##_DIV; \ > __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ > \ > - for (i = 10000; i; i--) \ > + for (i = 10000; i < 0; i--) \ > if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ > HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \ > break; \ > @@ -756,7 +756,7 @@ static int clk_misc_init(void) > reg |= 3 << BP_CLKCTRL_HBUS_DIV; > __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); > > - for (i = 10000; i; i--) > + for (i = 10000; i < 0; i--) > if (!(__raw_readl(CLKCTRL_BASE_ADDR + > HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY)) > break;
> On Mon, Jan 16, 2012 at 5:01 PM, Fabio Estevam > > <fabio.estevam@freescale.com> wrote: > > From: Fabio Estevam <festevam@gmail.com> > > > > Selecting audio on a mx28evk the saif driver was failing: > > > > [ 0.660000] saif0_clk_set_rate: divider writing timeout > > [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error > > -110 [ 0.670000] ALSA device list: > > [ 0.680000] No soundcards found. > > > > The timeout on saif0_clk_set_rate was due to the wrong condition for the > > end of loop. > > > > After fixing it, the audio driver can be correctly probed and becomes > > functional. > > > > While at it, fix the other locations where the similar issue occurs. > > > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > Please disregard this version. I see ... ignore my previous comment ;-) M
On Mon, Jan 16, 2012 at 6:52 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> I see ... ignore my previous comment ;-)
Sorry for the noise of my previous patch. I think this issue can be
solved by just increasing the timeout value.
I will make more tests to confirm and post a new patch.
Regards,
Fabio Estevam
On Mon, Jan 16, 2012 at 06:55:04PM -0200, Fabio Estevam wrote: > On Mon, Jan 16, 2012 at 6:52 PM, Marek Vasut <marek.vasut@gmail.com> wrote: > > > I see ... ignore my previous comment ;-) > > Sorry for the noise of my previous patch. I think this issue can be > solved by just increasing the timeout value. > > I will make more tests to confirm and post a new patch. Please make it proper and use some real timeout value (measured in us) instead of this random loop counter.
> On Mon, Jan 16, 2012 at 06:55:04PM -0200, Fabio Estevam wrote: > > On Mon, Jan 16, 2012 at 6:52 PM, Marek Vasut <marek.vasut@gmail.com> wrote: > > > I see ... ignore my previous comment ;-) > > > > Sorry for the noise of my previous patch. I think this issue can be > > solved by just increasing the timeout value. > > > > I will make more tests to confirm and post a new patch. > > Please make it proper and use some real timeout value (measured in us) > instead of this random loop counter. Good point
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..ee9e04b 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -396,7 +396,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ + for (i = 10000; i < 0; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ HW_CLKCTRL_##dr) & bm_busy)) \ break; \ @@ -439,7 +439,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ - for (i = 10000; i; i--) \ + for (i = 10000; i < 0; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \ break; \ @@ -479,7 +479,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg |= div << BP_CLKCTRL_##rs##_DIV; \ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ \ - for (i = 10000; i; i--) \ + for (i = 10000; i < 0; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \ break; \ @@ -756,7 +756,7 @@ static int clk_misc_init(void) reg |= 3 << BP_CLKCTRL_HBUS_DIV; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - for (i = 10000; i; i--) + for (i = 10000; i < 0; i--) if (!(__raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY)) break;