| Message ID | 20230819010928.916438-1-robh@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes | expand |
On 19/08/2023 03:09, Rob Herring wrote: > A schema under 'additionalProperties' works better for matching any > property/node other than the ones explicitly listed. Convert the schema > to use that rather than the wildcard and if/then schema. > > Drop 'phandle' properties which never need to be explicitly listed while > we're here. > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote: > A schema under 'additionalProperties' works better for matching any > property/node other than the ones explicitly listed. Convert the schema > to use that rather than the wildcard and if/then schema. > > Drop 'phandle' properties which never need to be explicitly listed while > we're here. > > Signed-off-by: Rob Herring <robh@kernel.org> Looks good to me, but Geert usually handles Renesas stuff so not applying unless I get asked explicitly to do so. Yours, Linus Walleij
Hi Linus, On Mon, Aug 21, 2023 at 12:34 PM Linus Walleij <linus.walleij@linaro.org> wrote: > On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote: > > A schema under 'additionalProperties' works better for matching any > > property/node other than the ones explicitly listed. Convert the schema > > to use that rather than the wildcard and if/then schema. > > > > Drop 'phandle' properties which never need to be explicitly listed while > > we're here. > > > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > Looks good to me, but Geert usually handles Renesas stuff so not > applying unless I get asked explicitly to do so. Unless some new bugs show up (hold wood etc.), I do not plan to send more pin control PRs for v6.5 or v6.6, so please take it. Thanks! Gr{oetje,eeting}s, Geert
On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote: > A schema under 'additionalProperties' works better for matching any > property/node other than the ones explicitly listed. Convert the schema > to use that rather than the wildcard and if/then schema. > > Drop 'phandle' properties which never need to be explicitly listed while > we're here. > > Signed-off-by: Rob Herring <robh@kernel.org> Patch applied to the pinctrl tree. Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 37173a64fed2..8271e7b2c162 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -37,40 +37,37 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + pinmux: description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + required: + - pinmux - properties: - phandle: true - - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. - - required: - - pinmux - - additionalProperties: false + additionalProperties: false allOf: - $ref: pinctrl.yaml# @@ -82,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
A schema under 'additionalProperties' works better for matching any property/node other than the ones explicitly listed. Convert the schema to use that rather than the wildcard and if/then schema. Drop 'phandle' properties which never need to be explicitly listed while we're here. Signed-off-by: Rob Herring <robh@kernel.org> --- .../pinctrl/renesas,rza2-pinctrl.yaml | 61 +++++++++---------- 1 file changed, 28 insertions(+), 33 deletions(-)