[v3,9/9] PCI: imx6: Add i.MX7D PCIe EP support

Add the i.MX7D PCIe EP mode support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

On Tue, Aug 08, 2023 at 01:34:18PM +0800, Richard Zhu wrote:
> Add the i.MX7D PCIe EP mode support.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 43c5251f5160..af7659712537 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -52,6 +52,7 @@ enum imx6_pcie_variants {
>  	IMX6QP,
>  	IMX6QP_EP,
>  	IMX7D,
> +	IMX7D_EP,
>  	IMX8MQ,
>  	IMX8MM,
>  	IMX8MP,
> @@ -359,6 +360,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
>  					   0);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
>  				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
>  		break;
> @@ -590,6 +592,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
>  				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  		break;
>  	case IMX8MM:
>  	case IMX8MM_EP:
> @@ -638,6 +641,7 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
>  				IMX6Q_GPR1_PCIE_TEST_PD);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
>  				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
>  				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> @@ -711,6 +715,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>  {
>  	switch (imx6_pcie->drvdata->variant) {
>  	case IMX7D:
> +	case IMX7D_EP:
>  	case IMX8MQ:
>  	case IMX8MQ_EP:
>  		reset_control_assert(imx6_pcie->pciephy_reset);
> @@ -763,6 +768,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  		reset_control_deassert(imx6_pcie->pciephy_reset);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  		reset_control_deassert(imx6_pcie->pciephy_reset);
>  
>  		/* Workaround for ERR010728, failure of PCI-e PLL VCO to
> @@ -854,6 +860,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
>  				   IMX6Q_GPR12_PCIE_CTL_2);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  	case IMX8MQ:
>  	case IMX8MQ_EP:
>  	case IMX8MM:
> @@ -880,6 +887,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
>  				   IMX6Q_GPR12_PCIE_CTL_2, 0);
>  		break;
>  	case IMX7D:
> +	case IMX7D_EP:
>  	case IMX8MQ:
>  	case IMX8MQ_EP:
>  	case IMX8MM:
> @@ -1385,6 +1393,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  					     "pcie_aux clock source missing or invalid\n");
>  		fallthrough;
>  	case IMX7D:
> +	case IMX7D_EP:
>  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
>  			imx6_pcie->controller_id = 1;
>  
> @@ -1572,6 +1581,12 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.gpr = "fsl,imx7d-iomuxc-gpr",
>  	},
> +	[IMX7D_EP] = {
> +		.variant = IMX7D_EP,
> +		.mode = DW_PCIE_EP_TYPE,
> +		.gpr = "fsl,imx7d-iomuxc-gpr",
> +		.epc_features = &imx6q_pcie_epc_features,
> +	},
>  	[IMX8MQ] = {
>  		.variant = IMX8MQ,
>  		.gpr = "fsl,imx8mq-iomuxc-gpr",
> @@ -1611,6 +1626,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
>  	{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
>  	{ .compatible = "fsl,imx6qp-pcie-ep", .data = &drvdata[IMX6QP_EP], },
>  	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
> +	{ .compatible = "fsl,imx7d-pcie-ep", .data = &drvdata[IMX7D_EP], },
>  	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
>  	{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
>  	{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
> -- 
> 2.34.1
>