Message ID | 20230608081153.441455-1-alexander.stein@ew.tq-group.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | [1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | total: 0 errors, 2 warnings, 52 lines checked |
robh/patch-applied | success | |
robh/dtbs-check | warning | build log |
robh/dt-meta-schema | success |
Am Donnerstag, 8. Juni 2023, 10:11:53 CEST schrieb Alexander Stein: > Use id-gpios and vbus-gpios instead. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip > 23 files changed, 26 insertions(+), 26 deletions(-) > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > index aa3e21bd6c8f4..20e3f41efe97f 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > @@ -27,7 +27,7 @@ module_led: led-0 { > > extcon_usb3: extcon-usb3 { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; > + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb3_id>; > }; >
On 08/06/2023 10:11, Alexander Stein wrote: > Convert the binding to DT schema format. Change the GPIO properties to new > naming convention using -gpios as well. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > .../bindings/extcon/extcon-usb-gpio.txt | 21 -------- > .../bindings/extcon/extcon-usb-gpio.yaml | 52 +++++++++++++++++++ > 2 files changed, 52 insertions(+), 21 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > deleted file mode 100644 > index dfc14f71e81fb..0000000000000 > --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > +++ /dev/null > @@ -1,21 +0,0 @@ > -USB GPIO Extcon device > - > -This is a virtual device used to generate USB cable states from the USB ID pin > -connected to a GPIO pin. > - > -Required properties: > -- compatible: Should be "linux,extcon-usb-gpio" > - > -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. > -- id-gpio: gpio for USB ID pin. See gpio binding. > -- vbus-gpio: gpio for USB VBUS pin. > - > -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: > - extcon_usb1 { > - compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; > - } > - > - &omap_dwc3_1 { > - extcon = <&extcon_usb1>; > - }; > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > new file mode 100644 > index 0000000000000..3a71d848dc7a8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: USB GPIO Extcon device > + > +maintainers: > + - Alexander Stein <alexander.stein@ew.tq-group.com> > + > +description: | > + This is a virtual device used to generate USB cable states from the > + USB ID pin connected to a GPIO pin. > + > +properties: > + compatible: > + const: linux,extcon-usb-gpio > + > + id-gpios: > + description: An input gpio for USB ID pin. > + maxItems: 1 > + > + vbus-gpios: > + description: An input gpio for USB VBus pin, used to detect presence of > + VBUS 5V. > + maxItems: 1 > + > +required: > + - compatible > + > +anyOf: oneOf instead > + - required: > + - id-gpios > + - required: > + - vbus-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + extcon_usb1 { No underscores, generic node names, so just "extcon-usb" > + compatible = "linux,extcon-usb-gpio"; > + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; > + vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; > + }; > + > + usb-controller { > + extcon = <&extcon_usb1>; > + }; Drop controller, no need to add consumers in a provider's binding. Best regards, Krzysztof
On 08/06/2023 10:11, Alexander Stein wrote: > Use id-gpios and vbus-gpios instead. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 2 +- > arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 2 +- > arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++-- > arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +- For mediatek: Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> > arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +- > arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 ++-- > arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 2 +- > arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 +- > arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 2 +- > arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +- > arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +- > arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 2 +- > arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- > 23 files changed, 26 insertions(+), 26 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi > index 5dbec71747c3b..61c2a63efc6db 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi > @@ -109,7 +109,7 @@ extcon_usb0: extcon-usb0 { > compatible = "linux,extcon-usb-gpio"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_extcon>; > - id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > }; > }; > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts > index d4ae7a3efff87..9e53b214abc85 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts > @@ -24,7 +24,7 @@ extcon_usbotg: extcon-usbotg0 { > compatible = "linux,extcon-usb-gpio"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usbcon0>; > - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; > + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; > }; > > pcie0_refclk: pcie0-refclk { > diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts > index fffdb7bbf889e..0c38f7b517637 100644 > --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts > +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts > @@ -43,12 +43,12 @@ cpus_fixed_vproc1: regulator-vproc-buck1 { > > extcon_usb: extcon_iddig { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; > + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; > }; > > extcon_usb1: extcon_iddig1 { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; > + id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > }; > > usb_p0_vbus: regulator-usb-p0-vbus { > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts > index 5122963d8743a..607d65ddba9ec 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts > @@ -41,7 +41,7 @@ hdmi_connector_in: endpoint { > > extcon_usb: extcon_iddig { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; > + id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>; > }; > > usb_p1_vbus: regulator@0 { > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > index 56dfca61253e6..8b8cb392e851d 100644 > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > @@ -77,7 +77,7 @@ usb2513 { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts > index b599909c44639..be657df89e734 100644 > --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts > +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts > @@ -99,14 +99,14 @@ button { > > usb2_id: usb2-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; > + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb2_vbus_det_gpio>; > }; > > usb3_id: usb3-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; > + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb3_vbus_det_gpio>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts > index 5025c08e48173..9b4270ba0652f 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts > @@ -48,7 +48,7 @@ button-volume-up { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > index 7b629243ef0d7..5e69c32c297eb 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts > @@ -52,7 +52,7 @@ led-0 { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts > index 56c42b0c97336..ada2eda5dacdb 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts > @@ -75,7 +75,7 @@ led-green { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > pinctrl-0 = <&usb_id_default>; > pinctrl-names = "default"; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts > index 175ca011998c6..f3eb7367db3e0 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts > @@ -80,7 +80,7 @@ led-2 { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts > index f23cfb2bf7934..4c19738af23ea 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts > @@ -68,7 +68,7 @@ led-0 { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts > index 733917531218c..27e02021b577a 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts > @@ -56,7 +56,7 @@ button-volume-up { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_id_default>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > index 85a8d8fe212ff..ae522f4c0aaec 100644 > --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > @@ -32,7 +32,7 @@ chosen { > > usb_id: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > pinctrl-0 = <&usb_id_default>; > pinctrl-names = "default"; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts > index 4a0645db0ae14..6374c5f53d9a1 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts > +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts > @@ -24,5 +24,5 @@ &usb_detect { > }; > > &usb3_id { > - id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>; > + id-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi > index b4b770a9277dc..d55e4075040ff 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi > @@ -71,7 +71,7 @@ panel_tvdd: tvdd-regulator { > > usb3_id: usb3-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; > + id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; > pinctrl-names = "default"; > pinctrl-0 = <&usb_detect>; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts > index b35e2d9f428c1..b6a214bea70f5 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts > +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts > @@ -31,7 +31,7 @@ aliases { > */ > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; > }; > > gpio-hall-sensors { > diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > index 687e96068cb2b..876c6921ddf07 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > @@ -89,8 +89,8 @@ vph_pwr: vph-pwr-regulator { > > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; > - vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; > + vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&cc_dir_default &usb_detect_en>; > }; > diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts > index 7459525d99828..0c1352b8f2645 100644 > --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts > +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts > @@ -43,7 +43,7 @@ key-volup { > */ > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; > }; > > hdmi-out { > diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi > index 3033723fc6ff3..87d0293c728d8 100644 > --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi > @@ -150,7 +150,7 @@ cont_splash_mem: splash@9d400000 { > */ > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; > }; > }; > > diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts > index 8fb2d17887424..3c47410ba94c0 100644 > --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts > +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts > @@ -85,7 +85,7 @@ framebuffer_mem: memory@9d400000 { > */ > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; > }; > }; > > diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > index 9f8a9ef398a26..9353b9b622f6e 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > @@ -42,7 +42,7 @@ framebuffer0: framebuffer@5c000000 { > > extcon_usb: extcon-usb { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; > }; > > gpio-keys { > diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts > index a7f4aeae9c1a5..1b06617ba34a9 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts > +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts > @@ -63,7 +63,7 @@ cmdline_mem: memory@ffd00000 { > > extcon_usb: usb-id { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; > + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; > }; > > gpio-keys { > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > index aa3e21bd6c8f4..20e3f41efe97f 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > @@ -27,7 +27,7 @@ module_led: led-0 { > > extcon_usb3: extcon-usb3 { > compatible = "linux,extcon-usb-gpio"; > - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; > + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&usb3_id>; > };
On Mon, Jun 12, 2023 at 10:29:16AM +0200, Krzysztof Kozlowski wrote: > On 08/06/2023 10:11, Alexander Stein wrote: > > Convert the binding to DT schema format. Change the GPIO properties to new > > naming convention using -gpios as well. > > > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > .../bindings/extcon/extcon-usb-gpio.txt | 21 -------- > > .../bindings/extcon/extcon-usb-gpio.yaml | 52 +++++++++++++++++++ > > 2 files changed, 52 insertions(+), 21 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > > > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > > deleted file mode 100644 > > index dfc14f71e81fb..0000000000000 > > --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt > > +++ /dev/null > > @@ -1,21 +0,0 @@ > > -USB GPIO Extcon device > > - > > -This is a virtual device used to generate USB cable states from the USB ID pin > > -connected to a GPIO pin. > > - > > -Required properties: > > -- compatible: Should be "linux,extcon-usb-gpio" > > - > > -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. > > -- id-gpio: gpio for USB ID pin. See gpio binding. > > -- vbus-gpio: gpio for USB VBUS pin. > > - > > -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: > > - extcon_usb1 { > > - compatible = "linux,extcon-usb-gpio"; > > - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; > > - } > > - > > - &omap_dwc3_1 { > > - extcon = <&extcon_usb1>; > > - }; > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > > new file mode 100644 > > index 0000000000000..3a71d848dc7a8 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml > > @@ -0,0 +1,52 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: USB GPIO Extcon device > > + > > +maintainers: > > + - Alexander Stein <alexander.stein@ew.tq-group.com> > > + > > +description: | Don't need '|' > > + This is a virtual device used to generate USB cable states from the > > + USB ID pin connected to a GPIO pin. Please add 'deprecated: true' here. New designs should use a USB connector node binding. > > + > > +properties: > > + compatible: > > + const: linux,extcon-usb-gpio > > + > > + id-gpios: > > + description: An input gpio for USB ID pin. > > + maxItems: 1 > > + > > + vbus-gpios: > > + description: An input gpio for USB VBus pin, used to detect presence of > > + VBUS 5V. > > + maxItems: 1 > > + > > +required: > > + - compatible > > + > > +anyOf: > > oneOf instead anyOf is correct. Both can be present. > > > + - required: > > + - id-gpios > > + - required: > > + - vbus-gpios > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + extcon_usb1 { > > No underscores, generic node names, so just "extcon-usb" > > > + compatible = "linux,extcon-usb-gpio"; > > + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; > > + vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; > > + }; > > + > > + usb-controller { > > + extcon = <&extcon_usb1>; > > + }; > > Drop controller, no need to add consumers in a provider's binding. > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt deleted file mode 100644 index dfc14f71e81fb..0000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt +++ /dev/null @@ -1,21 +0,0 @@ -USB GPIO Extcon device - -This is a virtual device used to generate USB cable states from the USB ID pin -connected to a GPIO pin. - -Required properties: -- compatible: Should be "linux,extcon-usb-gpio" - -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. -- id-gpio: gpio for USB ID pin. See gpio binding. -- vbus-gpio: gpio for USB VBUS pin. - -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: - extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; - } - - &omap_dwc3_1 { - extcon = <&extcon_usb1>; - }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml new file mode 100644 index 0000000000000..3a71d848dc7a8 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB GPIO Extcon device + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + +description: | + This is a virtual device used to generate USB cable states from the + USB ID pin connected to a GPIO pin. + +properties: + compatible: + const: linux,extcon-usb-gpio + + id-gpios: + description: An input gpio for USB ID pin. + maxItems: 1 + + vbus-gpios: + description: An input gpio for USB VBus pin, used to detect presence of + VBUS 5V. + maxItems: 1 + +required: + - compatible + +anyOf: + - required: + - id-gpios + - required: + - vbus-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + }; + + usb-controller { + extcon = <&extcon_usb1>; + };
Convert the binding to DT schema format. Change the GPIO properties to new naming convention using -gpios as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- .../bindings/extcon/extcon-usb-gpio.txt | 21 -------- .../bindings/extcon/extcon-usb-gpio.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 21 deletions(-) delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml