| Message ID | 1324053332-6431-2-git-send-email-dave.martin@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 12/17/11 01:35, Dave Martin wrote: > Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) > is bothersome to maintain and likely to lead to merge conflicts. > > This patch moves the knowledge of which platforms have a L2x0 or > PL310 cache controller to the individual machines. To enable this, > a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow > machines to indicate that they may have such a cache controller > independently of each other. > > Boards/SoCs which cannot reliably operate without the L2 cache > controller support will need to select CACHE_L2X0 directly from > their own Kconfigs instead. This applies to some TrustZone-enabled > boards where Linux runs in the Normal World, for example. > > Signed-off-by: Dave Martin<dave.martin@linaro.org> > Acked-by: Anton Vorontsov<cbouatmailru@gmail.com> > (for cns3xxx) > Acked-by: Tony Lindgren<tony@atomide.com> > (for omap) > Acked-by: Shawn Guo<shawn.guo@linaro.org> > (for imx) for exynos: Acked-by: Kukjin Kim <kgene.kim@samsung.com> > --- > arch/arm/Kconfig | 8 ++++++++ > arch/arm/mach-exynos/Kconfig | 1 + > arch/arm/mach-omap2/Kconfig | 1 + > arch/arm/mach-realview/Kconfig | 5 +++++ > arch/arm/mach-vexpress/Kconfig | 1 + > arch/arm/mm/Kconfig | 23 ++++++++++++++++------- > arch/arm/plat-mxc/Kconfig | 1 + > 7 files changed, 33 insertions(+), 7 deletions(-) (snip) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
On Fri, Dec 16, 2011 at 04:35:28PM +0000, Dave Martin wrote: > Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) > is bothersome to maintain and likely to lead to merge conflicts. > > This patch moves the knowledge of which platforms have a L2x0 or > PL310 cache controller to the individual machines. To enable this, > a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow > machines to indicate that they may have such a cache controller > independently of each other. > > Boards/SoCs which cannot reliably operate without the L2 cache > controller support will need to select CACHE_L2X0 directly from > their own Kconfigs instead. This applies to some TrustZone-enabled > boards where Linux runs in the Normal World, for example. > > Signed-off-by: Dave Martin <dave.martin@linaro.org> > Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> > (for cns3xxx) > Acked-by: Tony Lindgren <tony@atomide.com> > (for omap) > Acked-by: Shawn Guo <shawn.guo@linaro.org> > (for imx) For i.MX: Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > arch/arm/Kconfig | 8 ++++++++ > arch/arm/mach-exynos/Kconfig | 1 + > arch/arm/mach-omap2/Kconfig | 1 + > arch/arm/mach-realview/Kconfig | 5 +++++ > arch/arm/mach-vexpress/Kconfig | 1 + > arch/arm/mm/Kconfig | 23 ++++++++++++++++------- > arch/arm/plat-mxc/Kconfig | 1 + > 7 files changed, 33 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 44789ef..16a4b9e 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -344,6 +344,7 @@ config ARCH_HIGHBANK > select CPU_V7 > select GENERIC_CLOCKEVENTS > select HAVE_ARM_SCU > + select MIGHT_HAVE_CACHE_L2X0 > select USE_OF > help > Support for the Calxeda Highbank SoC based boards. > @@ -361,6 +362,7 @@ config ARCH_CNS3XXX > select CPU_V6K > select GENERIC_CLOCKEVENTS > select ARM_GIC > + select MIGHT_HAVE_CACHE_L2X0 > select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > help > @@ -381,6 +383,7 @@ config ARCH_PRIMA2 > select GENERIC_CLOCKEVENTS > select CLKDEV_LOOKUP > select GENERIC_IRQ_CHIP > + select MIGHT_HAVE_CACHE_L2X0 > select USE_OF > select ZONE_DMA > help > @@ -633,6 +636,7 @@ config ARCH_TEGRA > select GENERIC_GPIO > select HAVE_CLK > select HAVE_SCHED_CLOCK > + select MIGHT_HAVE_CACHE_L2X0 > select ARCH_HAS_CPUFREQ > help > This enables support for NVIDIA Tegra based systems (Tegra APX, > @@ -703,6 +707,7 @@ config ARCH_SHMOBILE > select CLKDEV_LOOKUP > select HAVE_MACH_CLKDEV > select GENERIC_CLOCKEVENTS > + select MIGHT_HAVE_CACHE_L2X0 > select NO_IOPORT > select SPARSE_IRQ > select MULTI_IRQ_HANDLER > @@ -904,6 +909,7 @@ config ARCH_U8500 > select CLKDEV_LOOKUP > select ARCH_REQUIRE_GPIOLIB > select ARCH_HAS_CPUFREQ > + select MIGHT_HAVE_CACHE_L2X0 > help > Support for ST-Ericsson's Ux500 architecture > > @@ -914,6 +920,7 @@ config ARCH_NOMADIK > select CPU_ARM926T > select CLKDEV_LOOKUP > select GENERIC_CLOCKEVENTS > + select MIGHT_HAVE_CACHE_L2X0 > select ARCH_REQUIRE_GPIOLIB > help > Support for the Nomadik platform by ST-Ericsson > @@ -973,6 +980,7 @@ config ARCH_ZYNQ > select ARM_GIC > select ARM_AMBA > select ICST > + select MIGHT_HAVE_CACHE_L2X0 > select USE_OF > help > Support for Xilinx Zynq ARM Cortex A9 Platform > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 724ec0f..7f2347b 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -17,6 +17,7 @@ choice > > config ARCH_EXYNOS4 > bool "SAMSUNG EXYNOS4" > + select MIGHT_HAVE_CACHE_L2X0 > help > Samsung EXYNOS4 SoCs based systems > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 5034147..c841578 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -44,6 +44,7 @@ config ARCH_OMAP4 > select CPU_V7 > select ARM_GIC > select LOCAL_TIMERS if SMP > + select MIGHT_HAVE_CACHE_L2X0 > select PL310_ERRATA_588369 > select PL310_ERRATA_727915 > select ARM_ERRATA_720789 > diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig > index dba6d0c..3dd620f 100644 > --- a/arch/arm/mach-realview/Kconfig > +++ b/arch/arm/mach-realview/Kconfig > @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP > bool "Support Multicore Cortex-A9 Tile" > depends on MACH_REALVIEW_EB > select CPU_V7 > + select MIGHT_HAVE_CACHE_L2X0 > help > Enable support for the Cortex-A9MPCore tile fitted to the > Realview(R) Emulation Baseboard platform. > @@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP > depends on MACH_REALVIEW_EB > select CPU_V6K > select ARCH_HAS_BARRIERS if SMP > + select MIGHT_HAVE_CACHE_L2X0 > help > Enable support for the ARM11MPCore tile fitted to the Realview(R) > Emulation Baseboard platform. > @@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP > select CPU_V6K > select ARM_GIC > select HAVE_PATA_PLATFORM > + select MIGHT_HAVE_CACHE_L2X0 > select ARCH_HAS_BARRIERS if SMP > help > Include support for the ARM(R) RealView(R) Platform Baseboard for > @@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176 > select CPU_V6 > select ARM_GIC > select HAVE_TCM > + select MIGHT_HAVE_CACHE_L2X0 > help > Include support for the ARM(R) RealView(R) Platform Baseboard for > ARM1176JZF-S. > @@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX > bool "Support RealView(R) Platform Baseboard Explore" > select ARM_GIC > select HAVE_PATA_PLATFORM > + select MIGHT_HAVE_CACHE_L2X0 > select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET > select ZONE_DMA if SPARSEMEM > help > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig > index 9311484..a8aefc8 100644 > --- a/arch/arm/mach-vexpress/Kconfig > +++ b/arch/arm/mach-vexpress/Kconfig > @@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4 > select ARM_ERRATA_720789 > select ARM_ERRATA_751472 > select ARM_ERRATA_753970 > + select MIGHT_HAVE_CACHE_L2X0 > > endmenu > diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig > index 67f75a0..acb1c36 100644 > --- a/arch/arm/mm/Kconfig > +++ b/arch/arm/mm/Kconfig > @@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH > Say Y here to use the Feroceon L2 cache in writethrough mode. > Unless you specifically require this, say N for writeback mode. > > +config MIGHT_HAVE_CACHE_L2X0 > + bool > + help > + This option should be selected by machines which have a L2x0 > + or PL310 cache controller, but where its use is optional. > + > + The only effect of this option is to make CACHE_L2X0 and > + related options available to the user for configuration. > + > + Boards or SoCs which always require the cache controller > + support to be present should select CACHE_L2X0 directly > + instead of this option, thus preventing the user from > + inadvertently configuring a broken kernel. > + > config CACHE_L2X0 > - bool "Enable the L2x0 outer cache controller" > - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ > - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ > - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ > - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ > - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK > - default y > + bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 > + default MIGHT_HAVE_CACHE_L2X0 > select OUTER_CACHE > select OUTER_CACHE_SYNC > help > diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig > index b3a1f2b..b30708e 100644 > --- a/arch/arm/plat-mxc/Kconfig > +++ b/arch/arm/plat-mxc/Kconfig > @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 > bool "i.MX3, i.MX6" > select AUTO_ZRELADDR if !ZBOOT_ROM > select ARM_PATCH_PHYS_VIRT > + select MIGHT_HAVE_CACHE_L2X0 > help > This enables support for systems based on the Freescale i.MX3 and i.MX6 > family. > -- > 1.7.4.1 > >
2011/12/17 Dave Martin <dave.martin@linaro.org>: > Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) > is bothersome to maintain and likely to lead to merge conflicts. > > This patch moves the knowledge of which platforms have a L2x0 or > PL310 cache controller to the individual machines. To enable this, > a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow > machines to indicate that they may have such a cache controller > independently of each other. > > Boards/SoCs which cannot reliably operate without the L2 cache > controller support will need to select CACHE_L2X0 directly from > their own Kconfigs instead. This applies to some TrustZone-enabled > boards where Linux runs in the Normal World, for example. > > Signed-off-by: Dave Martin <dave.martin@linaro.org> > Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> > (for cns3xxx) > Acked-by: Tony Lindgren <tony@atomide.com> > (for omap) > Acked-by: Shawn Guo <shawn.guo@linaro.org> > (for imx) Acked-by: Barry Song <baohua.song@csr.com> (for prima2) > --- > arch/arm/Kconfig | 8 ++++++++ > arch/arm/mach-exynos/Kconfig | 1 + > arch/arm/mach-omap2/Kconfig | 1 + > arch/arm/mach-realview/Kconfig | 5 +++++ > arch/arm/mach-vexpress/Kconfig | 1 + > arch/arm/mm/Kconfig | 23 ++++++++++++++++------- > arch/arm/plat-mxc/Kconfig | 1 + > 7 files changed, 33 insertions(+), 7 deletions(-) >
On Fri, Dec 16, 2011 at 5:35 PM, Dave Martin <dave.martin@linaro.org> wrote: > Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) > is bothersome to maintain and likely to lead to merge conflicts. (...) > > Signed-off-by: Dave Martin <dave.martin@linaro.org> > Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> > (for cns3xxx) > Acked-by: Tony Lindgren <tony@atomide.com> > (for omap) > Acked-by: Shawn Guo <shawn.guo@linaro.org> > (for imx) Acked-by: Linus Walleij <linus.walleij@linaro.org> (for ux500) Yours, Linus Walleij
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789ef..16a4b9e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -344,6 +344,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -361,6 +362,7 @@ config ARCH_CNS3XXX select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help @@ -381,6 +383,7 @@ config ARCH_PRIMA2 select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 select USE_OF select ZONE_DMA help @@ -633,6 +636,7 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -703,6 +707,7 @@ config ARCH_SHMOBILE select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -904,6 +909,7 @@ config ARCH_U8500 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ + select MIGHT_HAVE_CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture @@ -914,6 +920,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson @@ -973,6 +980,7 @@ config ARCH_ZYNQ select ARM_GIC select ARM_AMBA select ICST + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f..7f2347b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,7 @@ choice config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5034147..c841578 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 select CPU_V7 select ARM_GIC select LOCAL_TIMERS if SMP + select MIGHT_HAVE_CACHE_L2X0 select PL310_ERRATA_588369 select PL310_ERRATA_727915 select ARM_ERRATA_720789 diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dba6d0c..3dd620f 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the Cortex-A9MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select CPU_V6K select ARCH_HAS_BARRIERS if SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the ARM11MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP select CPU_V6K select ARM_GIC select HAVE_PATA_PLATFORM + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView(R) Platform Baseboard for @@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176 select CPU_V6 select ARM_GIC select HAVE_TCM + select MIGHT_HAVE_CACHE_L2X0 help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. @@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC select HAVE_PATA_PLATFORM + select MIGHT_HAVE_CACHE_L2X0 select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9311484..a8aefc8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4 select ARM_ERRATA_720789 select ARM_ERRATA_751472 select ARM_ERRATA_753970 + select MIGHT_HAVE_CACHE_L2X0 endmenu diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 67f75a0..acb1c36 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. +config MIGHT_HAVE_CACHE_L2X0 + bool + help + This option should be selected by machines which have a L2x0 + or PL310 cache controller, but where its use is optional. + + The only effect of this option is to make CACHE_L2X0 and + related options available to the user for configuration. + + Boards or SoCs which always require the cache controller + support to be present should select CACHE_L2X0 directly + instead of this option, thus preventing the user from + inadvertently configuring a broken kernel. + config CACHE_L2X0 - bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK - default y + bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 + default MIGHT_HAVE_CACHE_L2X0 select OUTER_CACHE select OUTER_CACHE_SYNC help diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b3a1f2b..b30708e 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 bool "i.MX3, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select MIGHT_HAVE_CACHE_L2X0 help This enables support for systems based on the Freescale i.MX3 and i.MX6 family.