| Message ID | 20230303214223.49451-1-robh@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: yamllint: Require a space after a comment '#' | expand |
On 03/03/2023 23:42, Rob Herring wrote: > Enable yamllint to check the prefered commenting style of requiring a > space after a comment character '#'. Fix the cases in the tree which > have a warning with this enabled. Most cases just need a space after the > '#'. A couple of cases with comments which were not intended to be > comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and > brcm,bcmgenet.yaml. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Rob Clark <robdclark@gmail.com> > Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> > Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Cc: Sean Paul <sean@poorly.run> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Marc Zyngier <maz@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Heiner Kallweit <hkallweit1@gmail.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Conor Dooley <conor.dooley@microchip.com> > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: freedreno@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-phy@lists.infradead.org > Cc: linux-gpio@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-riscv@lists.infradead.org > Cc: linux-spi@vger.kernel.org > --- > Documentation/devicetree/bindings/.yamllint | 2 +- > .../bindings/clock/qcom,a53pll.yaml | 4 ++-- > .../devicetree/bindings/crypto/ti,sa2ul.yaml | 4 ++-- > .../bindings/display/msm/qcom,mdp5.yaml | 2 +- > .../interrupt-controller/arm,gic.yaml | 4 ++-- > .../loongson,pch-msi.yaml | 2 +- > .../bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/media/ti,cal.yaml | 4 ++-- > .../bindings/net/brcm,bcmgenet.yaml | 2 -- > .../bindings/net/cortina,gemini-ethernet.yaml | 6 ++--- > .../devicetree/bindings/net/mdio-gpio.yaml | 4 ++-- > .../phy/marvell,armada-cp110-utmi-phy.yaml | 2 +- > .../bindings/phy/phy-stm32-usbphyc.yaml | 2 +- > .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 2 +- > .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- > .../regulator/nxp,pca9450-regulator.yaml | 8 +++---- > .../regulator/rohm,bd71828-regulator.yaml | 20 ++++++++-------- > .../regulator/rohm,bd71837-regulator.yaml | 6 ++--- > .../regulator/rohm,bd71847-regulator.yaml | 6 ++--- > .../bindings/soc/renesas/renesas.yaml | 2 +- > .../devicetree/bindings/soc/ti/ti,pruss.yaml | 2 +- > .../bindings/sound/amlogic,axg-tdm-iface.yaml | 2 +- > .../bindings/sound/qcom,lpass-rx-macro.yaml | 4 ++-- > .../bindings/sound/qcom,lpass-tx-macro.yaml | 4 ++-- > .../bindings/sound/qcom,lpass-va-macro.yaml | 4 ++-- > .../sound/qcom,q6dsp-lpass-ports.yaml | 2 +- > .../bindings/sound/simple-card.yaml | 24 +++++++++---------- > .../bindings/spi/microchip,mpfs-spi.yaml | 2 +- > 28 files changed, 65 insertions(+), 67 deletions(-) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm (and other Qualcom-specific schemas)
On Fri, 3 Mar 2023 15:42:23 -0600 Rob Herring wrote: > Enable yamllint to check the prefered commenting style of requiring a > space after a comment character '#'. Fix the cases in the tree which > have a warning with this enabled. Most cases just need a space after the > '#'. A couple of cases with comments which were not intended to be > comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and > brcm,bcmgenet.yaml. > > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org>
On Fri, Mar 03, 2023 at 03:42:23PM -0600, Rob Herring wrote: > Enable yamllint to check the prefered commenting style of requiring a > space after a comment character '#'. Fix the cases in the tree which > have a warning with this enabled. Most cases just need a space after the > '#'. A couple of cases with comments which were not intended to be > comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and > brcm,bcmgenet.yaml. Acked-by: Mark Brown <broonie@kernel.org>
On Fri, Mar 03, 2023 at 03:42:23PM -0600, Rob Herring wrote: > Enable yamllint to check the prefered commenting style of requiring a fwiiw: prefered -> preferred > space after a comment character '#'. Fix the cases in the tree which > have a warning with this enabled. Most cases just need a space after the > '#'. A couple of cases with comments which were not intended to be > comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and > brcm,bcmgenet.yaml. > > Signed-off-by: Rob Herring <robh@kernel.org> ...
On Fri, 03 Mar 2023 15:42:23 -0600, Rob Herring wrote: > Enable yamllint to check the prefered commenting style of requiring a > space after a comment character '#'. Fix the cases in the tree which > have a warning with this enabled. Most cases just need a space after the > '#'. A couple of cases with comments which were not intended to be > comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and > brcm,bcmgenet.yaml. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Rob Clark <robdclark@gmail.com> > Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> > Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Cc: Sean Paul <sean@poorly.run> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Marc Zyngier <maz@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Heiner Kallweit <hkallweit1@gmail.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Conor Dooley <conor.dooley@microchip.com> > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: freedreno@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-phy@lists.infradead.org > Cc: linux-gpio@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-riscv@lists.infradead.org > Cc: linux-spi@vger.kernel.org > --- > Documentation/devicetree/bindings/.yamllint | 2 +- > .../bindings/clock/qcom,a53pll.yaml | 4 ++-- > .../devicetree/bindings/crypto/ti,sa2ul.yaml | 4 ++-- > .../bindings/display/msm/qcom,mdp5.yaml | 2 +- > .../interrupt-controller/arm,gic.yaml | 4 ++-- > .../loongson,pch-msi.yaml | 2 +- > .../bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/media/ti,cal.yaml | 4 ++-- > .../bindings/net/brcm,bcmgenet.yaml | 2 -- > .../bindings/net/cortina,gemini-ethernet.yaml | 6 ++--- > .../devicetree/bindings/net/mdio-gpio.yaml | 4 ++-- > .../phy/marvell,armada-cp110-utmi-phy.yaml | 2 +- > .../bindings/phy/phy-stm32-usbphyc.yaml | 2 +- > .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 2 +- > .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- > .../regulator/nxp,pca9450-regulator.yaml | 8 +++---- > .../regulator/rohm,bd71828-regulator.yaml | 20 ++++++++-------- > .../regulator/rohm,bd71837-regulator.yaml | 6 ++--- > .../regulator/rohm,bd71847-regulator.yaml | 6 ++--- > .../bindings/soc/renesas/renesas.yaml | 2 +- > .../devicetree/bindings/soc/ti/ti,pruss.yaml | 2 +- > .../bindings/sound/amlogic,axg-tdm-iface.yaml | 2 +- > .../bindings/sound/qcom,lpass-rx-macro.yaml | 4 ++-- > .../bindings/sound/qcom,lpass-tx-macro.yaml | 4 ++-- > .../bindings/sound/qcom,lpass-va-macro.yaml | 4 ++-- > .../sound/qcom,q6dsp-lpass-ports.yaml | 2 +- > .../bindings/sound/simple-card.yaml | 24 +++++++++---------- > .../bindings/spi/microchip,mpfs-spi.yaml | 2 +- > 28 files changed, 65 insertions(+), 67 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint index 214abd3ec440..4abe9f0a1d46 100644 --- a/Documentation/devicetree/bindings/.yamllint +++ b/Documentation/devicetree/bindings/.yamllint @@ -19,7 +19,7 @@ rules: colons: {max-spaces-before: 0, max-spaces-after: 1} commas: {min-spaces-after: 1, max-spaces-after: 1} comments: - require-starting-space: false + require-starting-space: true min-spaces-from-content: 1 comments-indentation: disable document-start: diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml index 525ebaa93c85..64bfd0f5d4d0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml @@ -45,14 +45,14 @@ required: additionalProperties: false examples: - #Example 1 - A53 PLL found on MSM8916 devices + # Example 1 - A53 PLL found on MSM8916 devices - | a53pll: clock@b016000 { compatible = "qcom,msm8916-a53pll"; reg = <0xb016000 0x40>; #clock-cells = <0>; }; - #Example 2 - A53 PLL found on IPQ6018 devices + # Example 2 - A53 PLL found on IPQ6018 devices - | a53pll_ipq: clock-controller@b116000 { compatible = "qcom,ipq6018-a53pll"; diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 0c15fefb6671..77ec8bc70bf7 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -26,8 +26,8 @@ properties: dmas: items: - description: TX DMA Channel - - description: RX DMA Channel #1 - - description: RX DMA Channel #2 + - description: 'RX DMA Channel #1' + - description: 'RX DMA Channel #2' dma-names: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index ef461ad6ce4a..a763cf8da122 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -61,7 +61,7 @@ properties: - const: lut - const: tbu - const: tbu_rt - #MSM8996 has additional iommu clock + # MSM8996 has additional iommu clock - items: - const: iface - const: bus diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 220256907461..a2846e493497 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -133,8 +133,8 @@ properties: - items: # for "arm,cortex-a9-gic" - const: PERIPHCLK - const: PERIPHCLKEN - - const: clk # for "arm,gic-400" and "nvidia,tegra210" - - const: gclk #for "arm,pl390" + - const: clk # for "arm,gic-400" and "nvidia,tegra210" + - const: gclk # for "arm,pl390" power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml index 1f6fd73d4624..31e6bfbc3fd3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -46,7 +46,7 @@ required: - loongson,msi-base-vec - loongson,msi-num-vecs -additionalProperties: true #fixme +additionalProperties: true # fixme examples: - | diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index c0442e79cbb4..ffa7a6c4f212 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -69,7 +69,7 @@ properties: resets: maxItems: 1 - #The per-board settings for Gen2 and RZ/G1 platforms: + # The per-board settings for Gen2 and RZ/G1 platforms: port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false @@ -108,7 +108,7 @@ properties: data-active: true - #The per-board settings for Gen3 and RZ/G2 platforms: + # The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index f8e4d260d10a..26b3fedef355 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -75,7 +75,7 @@ properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false - description: CSI2 Port #0 + description: 'CSI2 Port #0' properties: endpoint: @@ -93,7 +93,7 @@ properties: port@1: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false - description: CSI2 Port #1 + description: 'CSI2 Port #1' properties: endpoint: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index c99034f053e8..0e5e5db32faf 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -73,8 +73,6 @@ allOf: unevaluatedProperties: false examples: - #include <dt-bindings/interrupt-controller/arm-gic.h> - - | ethernet@f0b60000 { phy-mode = "internal"; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml index 253b5d1407ee..44fd23a5fa2b 100644 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -31,9 +31,9 @@ properties: ranges: true -#The subnodes represents the two ethernet ports in this device. -#They are not independent of each other since they share resources -#in the parent node, and are thus children. +# The subnodes represents the two ethernet ports in this device. +# They are not independent of each other since they share resources +# in the parent node, and are thus children. patternProperties: "^ethernet-port@[0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml index 1d83b8dcce2c..137657341802 100644 --- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml @@ -33,8 +33,8 @@ properties: - description: MDIO - description: MDO -#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" -#node. +# Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" +# node. additionalProperties: type: object diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml index 30f3b5f32a95..43416c216190 100644 --- a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml @@ -41,7 +41,7 @@ properties: Phandle to the system controller node $ref: /schemas/types.yaml#/definitions/phandle -#Required child nodes: +# Required child nodes: patternProperties: "^usb-phy@[0|1]$": diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 5b4c915cc9e5..24a3dbde223b 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -55,7 +55,7 @@ properties: description: number of clock cells for ck_usbo_48m consumer const: 0 -#Required child nodes: +# Required child nodes: patternProperties: "^usb-phy@[0|1]$": diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index 2e19a434c669..0ef2c9b9d466 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -83,7 +83,7 @@ properties: description: Phandle to a regulator supply to any specific refclk pll block. -#Required nodes: +# Required nodes: patternProperties: "^usb3-phy@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index e0e943e5b874..a09ebbfec574 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -51,7 +51,7 @@ properties: description: The interrupt outputs to sysirq. maxItems: 1 -#PIN CONFIGURATION NODES +# PIN CONFIGURATION NODES patternProperties: '-pins$': type: object diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index 835b53302db8..6b53dc87694e 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -17,10 +17,10 @@ description: | Datasheet is available at https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf -#The valid names for PCA9450 regulator nodes are: -#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, -#LDO1, LDO2, LDO3, LDO4, LDO5 -#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. +# The valid names for PCA9450 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, +# LDO1, LDO2, LDO3, LDO4, LDO5 +# Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 3cbe3b76ccee..bbf38d5cd06d 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -82,20 +82,20 @@ patternProperties: # Supported default DVS states: # buck | run | idle | suspend | lpsr - #-------------------------------------------------------------- + # -------------------------------------------------------------- # 1, 2, 6, and 7 | supported | supported | supported (*) - #-------------------------------------------------------------- + # -------------------------------------------------------------- # 3, 4, and 5 | supported (**) - #-------------------------------------------------------------- + # -------------------------------------------------------------- # - #(*) LPSR and SUSPEND states use same voltage but both states have own - # enable / - # disable settings. Voltage 0 can be specified for a state to make - # regulator disabled on that state. + # (*) LPSR and SUSPEND states use same voltage but both states have own + # enable / + # disable settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. # - #(**) All states use same voltage but have own enable / disable - # settings. Voltage 0 can be specified for a state to make - # regulator disabled on that state. + # (**) All states use same voltage but have own enable / disable + # settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. required: - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index ab842817d847..abf1fbdf3850 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -23,9 +23,9 @@ description: | if they are disabled at startup the voltage monitoring for LDO5/LDO6 will cause PMIC to reset. -#The valid names for BD71837 regulator nodes are: -#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 -#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 +# The valid names for BD71837 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 +# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 patternProperties: "^LDO[1-7]$": diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index 65fc3d15f693..34ce781954b6 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -22,9 +22,9 @@ description: | not be disabled by driver at startup. If BUCK5 is disabled at startup the voltage monitoring for LDO5/LDO6 can cause PMIC to reset. -#The valid names for BD71847 regulator nodes are: -#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 -#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 +# The valid names for BD71847 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 +# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 patternProperties: "^LDO[1-6]$": diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 2789022b52eb..3a618b4c8ab7 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -111,7 +111,7 @@ properties: - description: RZ/G1C (R8A77470) items: - enum: - - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + - iwave,g23s # iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) - const: renesas,r8a77470 - description: RZ/G2M (R8A774A1) diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 847873289f25..c697691f1fd4 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -313,7 +313,7 @@ additionalProperties: false # Due to inability of correctly verifying sub-nodes with an @address through # the "required" list, the required sub-nodes below are commented out for now. -#required: +# required: # - memories # - interrupt-controller # - pru diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml index 320f0002649d..45955d8a26d1 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml @@ -24,7 +24,7 @@ properties: items: - description: Bit clock - description: Sample clock - - description: Master clock #optional + - description: Master clock # optional clock-names: minItems: 2 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 79c6f8da1319..e6fcf542cf87 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -34,13 +34,13 @@ properties: clock-names: oneOf: - - items: #for ADSP based platforms + - items: # for ADSP based platforms - const: mclk - const: npl - const: macro - const: dcodec - const: fsgen - - items: #for ADSP bypass based platforms + - items: # for ADSP bypass based platforms - const: mclk - const: npl - const: fsgen diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index da5f70910da5..6c8751497d36 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -36,13 +36,13 @@ properties: clock-names: oneOf: - - items: #for ADSP based platforms + - items: # for ADSP based platforms - const: mclk - const: npl - const: macro - const: dcodec - const: fsgen - - items: #for ADSP bypass based platforms + - items: # for ADSP bypass based platforms - const: mclk - const: npl - const: fsgen diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 0a3c688ef1ec..61cdfc265b0f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -34,11 +34,11 @@ properties: clock-names: oneOf: - - items: #for ADSP based platforms + - items: # for ADSP based platforms - const: mclk - const: macro - const: dcodec - - items: #for ADSP bypass based platforms + - items: # for ADSP bypass based platforms - const: mclk clock-output-names: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index d06f188030a3..044e77718a1b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -26,7 +26,7 @@ properties: '#size-cells': const: 0 -#Digital Audio Interfaces +# Digital Audio Interfaces patternProperties: '^dai@[0-9]+$': type: object diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index f0d81bfe2598..806e2fff165f 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -262,9 +262,9 @@ required: additionalProperties: false examples: -#-------------------- +# -------------------- # single DAI link -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; @@ -291,9 +291,9 @@ examples: }; }; -#-------------------- +# -------------------- # Multi DAI links -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; @@ -334,10 +334,10 @@ examples: }; }; -#-------------------- +# -------------------- # route audio from IMX6 SSI2 through TLV320DAC3100 codec # through TPA6130A2 amplifier to headphones: -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; @@ -359,9 +359,9 @@ examples: }; }; -#-------------------- +# -------------------- # Sampling Rate Conversion -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; @@ -387,9 +387,9 @@ examples: }; }; -#-------------------- +# -------------------- # 2 CPU 1 Codec (Mixing) -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; @@ -424,7 +424,7 @@ examples: }; }; -#-------------------- +# -------------------- # Multi DAI links with DPCM: # # CPU0 ------ ak4613 @@ -433,7 +433,7 @@ examples: # CPU3 --/ /* DPCM 5ch/6ch */ # CPU4 --/ /* DPCM 7ch/8ch */ # CPU5 ------ PCM3168A-c -#-------------------- +# -------------------- - | sound { compatible = "simple-audio-card"; diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index 1051690e3753..74a817cc7d94 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -22,7 +22,7 @@ properties: - items: - const: microchip,mpfs-qspi - const: microchip,coreqspi-rtl-v2 - - const: microchip,coreqspi-rtl-v2 #FPGA QSPI + - const: microchip,coreqspi-rtl-v2 # FPGA QSPI - const: microchip,mpfs-spi reg:
Enable yamllint to check the prefered commenting style of requiring a space after a comment character '#'. Fix the cases in the tree which have a warning with this enabled. Most cases just need a space after the '#'. A couple of cases with comments which were not intended to be comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and brcm,bcmgenet.yaml. Signed-off-by: Rob Herring <robh@kernel.org> --- Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: linux-clk@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-phy@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-riscv@lists.infradead.org Cc: linux-spi@vger.kernel.org --- Documentation/devicetree/bindings/.yamllint | 2 +- .../bindings/clock/qcom,a53pll.yaml | 4 ++-- .../devicetree/bindings/crypto/ti,sa2ul.yaml | 4 ++-- .../bindings/display/msm/qcom,mdp5.yaml | 2 +- .../interrupt-controller/arm,gic.yaml | 4 ++-- .../loongson,pch-msi.yaml | 2 +- .../bindings/media/renesas,vin.yaml | 4 ++-- .../devicetree/bindings/media/ti,cal.yaml | 4 ++-- .../bindings/net/brcm,bcmgenet.yaml | 2 -- .../bindings/net/cortina,gemini-ethernet.yaml | 6 ++--- .../devicetree/bindings/net/mdio-gpio.yaml | 4 ++-- .../phy/marvell,armada-cp110-utmi-phy.yaml | 2 +- .../bindings/phy/phy-stm32-usbphyc.yaml | 2 +- .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 2 +- .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- .../regulator/nxp,pca9450-regulator.yaml | 8 +++---- .../regulator/rohm,bd71828-regulator.yaml | 20 ++++++++-------- .../regulator/rohm,bd71837-regulator.yaml | 6 ++--- .../regulator/rohm,bd71847-regulator.yaml | 6 ++--- .../bindings/soc/renesas/renesas.yaml | 2 +- .../devicetree/bindings/soc/ti/ti,pruss.yaml | 2 +- .../bindings/sound/amlogic,axg-tdm-iface.yaml | 2 +- .../bindings/sound/qcom,lpass-rx-macro.yaml | 4 ++-- .../bindings/sound/qcom,lpass-tx-macro.yaml | 4 ++-- .../bindings/sound/qcom,lpass-va-macro.yaml | 4 ++-- .../sound/qcom,q6dsp-lpass-ports.yaml | 2 +- .../bindings/sound/simple-card.yaml | 24 +++++++++---------- .../bindings/spi/microchip,mpfs-spi.yaml | 2 +- 28 files changed, 65 insertions(+), 67 deletions(-)