Message ID | 20230126135339.3488682-1-arnd@kernel.org |
---|---|
State | New |
Headers | show |
Series | fec: convert to gpio descriptor | expand |
On Thu, Jan 26, 2023 at 02:52:58PM +0100, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The driver can be trivially converted, as it only triggers the gpio > pin briefly to do a reset, and it already only supports DT. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++++------------- > 1 file changed, 11 insertions(+), 14 deletions(-) > > diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c > index 5ff45b1a74a5..dee2890fd702 100644 > --- a/drivers/net/ethernet/freescale/fec_main.c > +++ b/drivers/net/ethernet/freescale/fec_main.c > @@ -56,7 +56,7 @@ > #include <linux/fec.h> > #include <linux/of.h> > #include <linux/of_device.h> > -#include <linux/of_gpio.h> > +#include <linux/gpio/consumer.h> > #include <linux/of_mdio.h> > #include <linux/of_net.h> > #include <linux/regulator/consumer.h> > @@ -4035,7 +4035,8 @@ static int fec_enet_init(struct net_device *ndev) > #ifdef CONFIG_OF > static int fec_reset_phy(struct platform_device *pdev) > { > - int err, phy_reset; > + int err; > + struct gpio_desc *phy_reset; > bool active_high = false; > int msec = 1, phy_post_delay = 0; > struct device_node *np = pdev->dev.of_node; Hi Arnd netdev drivers are supposed to use 'reverse Christmas tree'. It looks like this function is actually using 'Christmas tree' :-) Please could you keep with the current coding style. > @@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev) > if (!err && msec > 1000) > msec = 1; > > - phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); > - if (phy_reset == -EPROBE_DEFER) > - return phy_reset; > - else if (!gpio_is_valid(phy_reset)) > - return 0; > - > err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay); > /* valid reset duration should be less than 1s */ > if (!err && phy_post_delay > 1000) > @@ -4061,11 +4056,13 @@ static int fec_reset_phy(struct platform_device *pdev) > > active_high = of_property_read_bool(np, "phy-reset-active-high"); > > - err = devm_gpio_request_one(&pdev->dev, phy_reset, > - active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, > - "phy-reset"); > - if (err) { > - dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); > + phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset", > + active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); > + if (IS_ERR(phy_reset)) { > + err = PTR_ERR(phy_reset); > + if (err != -EPROBE_DEFER) > + dev_err(&pdev->dev, > + "failed to get phy-reset-gpios: %d\n", err); dev_err_probe() looks usable here. Andrew
On Thu, Jan 26, 2023, at 19:02, Andrew Lunn wrote: > On Thu, Jan 26, 2023 at 02:52:58PM +0100, Arnd Bergmann wrote: >> static int fec_reset_phy(struct platform_device *pdev) >> { >> - int err, phy_reset; >> + int err; >> + struct gpio_desc *phy_reset; >> bool active_high = false; >> int msec = 1, phy_post_delay = 0; >> struct device_node *np = pdev->dev.of_node; > > Hi Arnd > > netdev drivers are supposed to use 'reverse Christmas tree'. It looks > like this function is actually using 'Christmas tree' :-) Please could > you keep with the current coding style. My feeling is that the style in this file is just random, but having 'err' as the last one fits with the usual style and with what some of the other functions do, so I'll do that. >> + active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); >> + if (IS_ERR(phy_reset)) { >> + err = PTR_ERR(phy_reset); >> + if (err != -EPROBE_DEFER) >> + dev_err(&pdev->dev, >> + "failed to get phy-reset-gpios: %d\n", err); > > dev_err_probe() looks usable here. Ah nice, I've never been able to use that one so far. Will send a v2 with both suggestions. ARnd
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 5ff45b1a74a5..dee2890fd702 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -56,7 +56,7 @@ #include <linux/fec.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/regulator/consumer.h> @@ -4035,7 +4035,8 @@ static int fec_enet_init(struct net_device *ndev) #ifdef CONFIG_OF static int fec_reset_phy(struct platform_device *pdev) { - int err, phy_reset; + int err; + struct gpio_desc *phy_reset; bool active_high = false; int msec = 1, phy_post_delay = 0; struct device_node *np = pdev->dev.of_node; @@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev) if (!err && msec > 1000) msec = 1; - phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); - if (phy_reset == -EPROBE_DEFER) - return phy_reset; - else if (!gpio_is_valid(phy_reset)) - return 0; - err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay); /* valid reset duration should be less than 1s */ if (!err && phy_post_delay > 1000) @@ -4061,11 +4056,13 @@ static int fec_reset_phy(struct platform_device *pdev) active_high = of_property_read_bool(np, "phy-reset-active-high"); - err = devm_gpio_request_one(&pdev->dev, phy_reset, - active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - "phy-reset"); - if (err) { - dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); + phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset", + active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); + if (IS_ERR(phy_reset)) { + err = PTR_ERR(phy_reset); + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to get phy-reset-gpios: %d\n", err); return err; } @@ -4074,7 +4071,7 @@ static int fec_reset_phy(struct platform_device *pdev) else usleep_range(msec * 1000, msec * 1000 + 1000); - gpio_set_value_cansleep(phy_reset, !active_high); + gpiod_set_value_cansleep(phy_reset, !active_high); if (!phy_post_delay) return 0;