| Message ID | 20221123061635.32025-2-billy_tsai@aspeedtech.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Support pwm/tach driver for aspeed ast26xx | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On 23/11/2022 07:16, Billy Tsai wrote: > Add device binding for aspeed pwm-tach device which is a multi-function > device include pwm and tach function. Subject: drop second, redundant "bindings". Also use proper PATCH prefix. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > new file mode 100644 > index 000000000000..e2a7be2e0a18 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2021 Aspeed, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PWM Tach controller > + > +description: | > + The PWM Tach controller is represented as a multi-function device which > + includes: > + PWM > + Tach > + > +maintainers: > + - Billy Tsai <billy_tsai@aspeedtech.com> > + > +properties: > + compatible: > + items: > + - enum: > + - aspeed,ast2600-pwm-tach > + - const: syscon > + - const: simple-mfd > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 If this is simple-mfd then it cannot take clocks or resets. Usually the recommendation for such case is: This is not simple-mfd, drop it. Drop also syscon and make a proper device. However I am surprised to see such change, so I have no clue why this was done. > + > + pwm: > + type: object > + $ref: "/schemas/pwm/aspeed,ast2600-pwm.yaml" Drop quotes. There is no such file. Are you sure you ordered the patches correctly? > + > + tach: > + type: object > + $ref: "/schemas/hwmon/aspeed,ast2600-tach.yaml" Drop quotes. There is no such file. > + > +required: > + - compatible > + - reg > + - clocks > + - resets Best regards, Krzysztof
On 23/11/2022 09:24, Krzysztof Kozlowski wrote: > On 23/11/2022 07:16, Billy Tsai wrote: >> Add device binding for aspeed pwm-tach device which is a multi-function >> device include pwm and tach function. > > Subject: drop second, redundant "bindings". > Also use proper PATCH prefix. > >> >> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> >> --- >> .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 +++++++++++++++++++ >> 1 file changed, 73 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml >> >> diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml >> new file mode 100644 >> index 000000000000..e2a7be2e0a18 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml >> @@ -0,0 +1,73 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright (C) 2021 Aspeed, Inc. >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: PWM Tach controller >> + >> +description: | >> + The PWM Tach controller is represented as a multi-function device which >> + includes: >> + PWM >> + Tach >> + >> +maintainers: >> + - Billy Tsai <billy_tsai@aspeedtech.com> >> + >> +properties: >> + compatible: >> + items: >> + - enum: >> + - aspeed,ast2600-pwm-tach >> + - const: syscon >> + - const: simple-mfd >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + resets: >> + maxItems: 1 > > If this is simple-mfd then it cannot take clocks or resets. Usually the > recommendation for such case is: This is not simple-mfd, drop it. Drop > also syscon and make a proper device. > > However I am surprised to see such change, so I have no clue why this > was done. Actually now I see it was like that in previous patch, I just missed it during previous review. Anyway this must be fixed. Best regards, Krzysztof
On Wed, 23 Nov 2022 14:16:31 +0800, Billy Tsai wrote: > Add device binding for aspeed pwm-tach device which is a multi-function > device include pwm and tach function. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/pwm/aspeed,ast2600-pwm.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: pwm-tach@1e610000: pwm: False schema does not allow {'compatible': ['aspeed,ast2600-pwm'], '#pwm-cells': [[3]], 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]]} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: pwm-tach@1e610000: tach: False schema does not allow {'compatible': ['aspeed,ast2600-tach'], 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]]} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb:0:0: /example-0/pwm-tach@1e610000/pwm: failed to match any schema with compatible: ['aspeed,ast2600-pwm'] Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb:0:0: /example-0/pwm-tach@1e610000/tach: failed to match any schema with compatible: ['aspeed,ast2600-tach'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221123061635.32025-2-billy_tsai@aspeedtech.com This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command.
On 2022/11/23, 4:27 PM, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org> wrote:
On 23/11/2022 09:24, Krzysztof Kozlowski wrote:
> > On 23/11/2022 07:16, Billy Tsai wrote:
> >> Add device binding for aspeed pwm-tach device which is a multi-function
> >> device include pwm and tach function.
> >
> > Subject: drop second, redundant "bindings".
> > Also use proper PATCH prefix.
> >
> >>
> >> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> >> ---
> >> .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 +++++++++++++++++++
> >> 1 file changed, 73 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml
> >> new file mode 100644
> >> index 000000000000..e2a7be2e0a18
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml
> >> @@ -0,0 +1,73 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +# Copyright (C) 2021 Aspeed, Inc.
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: PWM Tach controller
> >> +
> >> +description: |
> >> + The PWM Tach controller is represented as a multi-function device which
> >> + includes:
> >> + PWM
> >> + Tach
> >> +
> >> +maintainers:
> >> + - Billy Tsai <billy_tsai@aspeedtech.com>
> >> +
> >> +properties:
> >> + compatible:
> >> + items:
> >> + - enum:
> >> + - aspeed,ast2600-pwm-tach
> >> + - const: syscon
> >> + - const: simple-mfd
> >> +
> >> + reg:
> >> + maxItems: 1
> >> +
> >> + clocks:
> >> + maxItems: 1
> >> +
> >> + resets:
> >> + maxItems: 1
> >
> > If this is simple-mfd then it cannot take clocks or resets. Usually the
> > recommendation for such case is: This is not simple-mfd, drop it. Drop
> > also syscon and make a proper device.
> >
> > However I am surprised to see such change, so I have no clue why this
> > was done.
> Actually now I see it was like that in previous patch, I just missed it
> during previous review. Anyway this must be fixed.
I have two module (PWM and TACH) but share with the same base address,
The PWM will use the offset (N*0x10) + 0x0 and 0x04.
The TACH will use the offset (N*0x10) + 0x8 and 0x0c.
The range of the N is 0~15.
Can you give me some advice to fix this problem without using simple-mfd?
Thanks
Best Regards,
Billy Tsai
On 09/12/2022 01:54, Billy Tsai wrote: > > > However I am surprised to see such change, so I have no clue why this > > > was done. > > > Actually now I see it was like that in previous patch, I just missed it > > during previous review. Anyway this must be fixed. > > I have two module (PWM and TACH) but share with the same base address, > The PWM will use the offset (N*0x10) + 0x0 and 0x04. > The TACH will use the offset (N*0x10) + 0x8 and 0x0c. > The range of the N is 0~15. > Can you give me some advice to fix this problem without using simple-mfd? Use regular driver which populates children. Best regards, Krzysztof
On 2022/12/9, 3:48 PM, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org <mailto:krzysztof.kozlowski@linaro.org>> wrote: On 09/12/2022 01:54, Billy Tsai wrote: > > > > However I am surprised to see such change, so I have no clue why this > > > > was done. > > > > > Actually now I see it was like that in previous patch, I just missed it > > > during previous review. Anyway this must be fixed. > > > > I have two module (PWM and TACH) but share with the same base address, > > The PWM will use the offset (N*0x10) + 0x0 and 0x04. > > The TACH will use the offset (N*0x10) + 0x8 and 0x0c. > > The range of the N is 0~15. > > Can you give me some advice to fix this problem without using simple-mfd? > Use regular driver which populates children. I think that my scenario meets the definition in mfd.txt: - A range of memory registers containing "miscellaneous system registers" also known as a system controller "syscon" or any other memory range containing a mix of unrelated hardware devices. Can you tell me the considerations for not using simple-mfd? Thanks Best Regards, Billy Tsai
On 23/11/2022 09:24, Krzysztof Kozlowski wrote: > On 23/11/2022 07:16, Billy Tsai wrote: >> Add device binding for aspeed pwm-tach device which is a multi-function >> device include pwm and tach function. > > Subject: drop second, redundant "bindings". Where did you implement this comment in your v6? > Also use proper PATCH prefix. Where did you implement this comment in your v6? > Best regards, Krzysztof
On 08/06/2023 09:15, Billy Tsai wrote: > On 23/11/2022 09:24, Krzysztof Kozlowski wrote: > >> On 23/11/2022 07:16, Billy Tsai wrote: > >>> Add device binding for aspeed pwm-tach device which is a multi-function > >>> device include pwm and tach function. > >> > >> Subject: drop second, redundant "bindings". > > > Where did you implement this comment in your v6? > > Sorry, I guess by "Subject: drop second, redundant "bindings"" you meant to remove the second "bindings" string from my subject. So I change the subject from "dt-bindings: hwmon: Add bindings for aspeed tach controller" and "dt-bindings: pwm: Add bindings for aspeed pwm controller" in v4 to "dt-bindings: hwmon: Add ASPEED TACH Control documentation" and "dt-bindings: pwm: Add ASPEED PWM Control documentation" in v6. A nit, subject: drop second/last, redundant "documentation". The "dt-bindings" prefix is already stating that these are bindings and documentation. > If I have misunderstood your comment, please let me know. You replaced one redundant with other redundant. I only asked to drop it, not replace it. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml new file mode 100644 index 000000000000..e2a7be2e0a18 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM Tach controller + +description: | + The PWM Tach controller is represented as a multi-function device which + includes: + PWM + Tach + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +properties: + compatible: + items: + - enum: + - aspeed,ast2600-pwm-tach + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + pwm: + type: object + $ref: "/schemas/pwm/aspeed,ast2600-pwm.yaml" + + tach: + type: object + $ref: "/schemas/hwmon/aspeed,ast2600-tach.yaml" + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + pwm_tach: pwm-tach@1e610000 { + compatible = "aspeed,ast2600-pwm-tach", "syscon", "simple-mfd"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + + pwm: pwm { + compatible = "aspeed,ast2600-pwm"; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default>; + }; + + tach: tach { + compatible = "aspeed,ast2600-tach"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tach0_default>; + }; + };
Add device binding for aspeed pwm-tach device which is a multi-function device include pwm and tach function. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml