diff mbox series

[v4,02/10] dt-bindings: display: bridge: Add MHDP DP for i.MX8MQ

Message ID f09833038399e4ed0ff845724fc99bcf8b2793c9.1669013346.git.Sandor.yu@nxp.com
State Superseded, archived
Headers show
Series Initial support for Cadence MHDP(HDMI/DP) for i.MX8MQ | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Sandor Yu Nov. 21, 2022, 7:23 a.m. UTC 
Add bindings for i.MX8MQ MHDP DisplayPort.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
---
 .../display/bridge/cdns,mhdp-imx8mq-dp.yaml   | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml

Comments

Krzysztof Kozlowski Nov. 22, 2022, 8:27 a.m. UTC | #1 
On 21/11/2022 08:23, Sandor Yu wrote:
> Add bindings for i.MX8MQ MHDP DisplayPort.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> ---
>  .../display/bridge/cdns,mhdp-imx8mq-dp.yaml   | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
> new file mode 100644
> index 000000000000..d82f3ceddaa8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp-imx8mq-dp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence MHDP Displayport bridge
> +
> +maintainers:
> +  - Sandor Yu <Sandor.yu@nxp.com>
> +
> +description:
> +  The Cadence MHDP Displayport TX interface.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,mhdp-imx8mq-dp
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: MHDP DP APB clock.
> +
> +  phys:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: Hotplug cable plugin.
> +      - description: Hotplug cable plugout.
> +
> +  interrupt-names:
> +    items:
> +      - const: plug_in
> +      - const: plug_out
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port from display controller output.
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port to DP connector.
> +
> +    required:
> +      - port@0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +  - interrupt-names
> +  - phys
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    mhdp_dp: dp-bridge@32c00000 {
> +        compatible = "cdns,mhdp-imx8mq-dp";
> +        reg = <0x32c00000 0x100000>;
> +        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "plug_in", "plug_out";
> +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> +        phys = <&dp_phy>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                mhdp_in: endpoint {
> +                    remote-endpoint = <&dcss_out>;
> +                };

As Rob suggested, you allowed property for output to DP port. However it
is not in the example. If this is a bridge, what does it bridge if there
is no output connector?


Best regards,
Krzysztof
Sandor Yu Nov. 22, 2022, 3:30 p.m. UTC | #2 
Hi Krzysztof,

Thanks your comments,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: 2022年11月22日 16:28
> To: Sandor Yu <sandor.yu@nxp.com>; andrzej.hajda@intel.com;
> neil.armstrong@linaro.org; robert.foss@linaro.org;
> Laurent.pinchart@ideasonboard.com; jonas@kwiboo.se;
> jernej.skrabec@gmail.com; airlied@gmail.com; daniel@ffwll.ch;
> robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com;
> kishon@ti.com; vkoul@kernel.org; dri-devel@lists.freedesktop.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org;
> alexander.stein@ew.tq-group.com
> Cc: kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Oliver Brown
> <oliver.brown@nxp.com>
> Subject: [EXT] Re: [PATCH v4 02/10] dt-bindings: display: bridge: Add MHDP
> DP for i.MX8MQ
> 
> Caution: EXT Email
> 
> On 21/11/2022 08:23, Sandor Yu wrote:
> > Add bindings for i.MX8MQ MHDP DisplayPort.
> >
> > Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> > ---
> >  .../display/bridge/cdns,mhdp-imx8mq-dp.yaml   | 93
> +++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644
> >
> Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.y
> > aml
> >
> > diff --git
> >
> a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp
> > .yaml
> >
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp
> > .yaml
> > new file mode 100644
> > index 000000000000..d82f3ceddaa8
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8m
> > +++ q-dp.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fcdns%2Cmhdp-imx8mq-dp.
> yaml%
> >
> +23&amp;data=05%7C01%7CSandor.yu%40nxp.com%7C163690c8a8ab4f7a6
> c9208dac
> >
> +c6373c4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6380470
> 247542869
> >
> +46%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luM
> zIiLCJBTi
> >
> +I6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=Eei5Nkp0
> Hl8SHpBLZU
> > +1HsJDnWQujHvmPh2XMuC%2BSZ58%3D&amp;reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=05%7C01%7CSa
> ndor.yu
> >
> +%40nxp.com%7C163690c8a8ab4f7a6c9208dacc6373c4%7C686ea1d3bc2b4
> c6fa92cd
> >
> +99c5c301635%7C0%7C0%7C638047024754286946%7CUnknown%7CTWFp
> bGZsb3d8eyJW
> >
> +IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7
> C3000
> >
> +%7C%7C%7C&amp;sdata=eZUnepnQHS9ewyWb9AHMht%2F%2BevutmOt
> mTajL%2B5Ewwbs
> > +%3D&amp;reserved=0
> > +
> > +title: Cadence MHDP Displayport bridge
> > +
> > +maintainers:
> > +  - Sandor Yu <Sandor.yu@nxp.com>
> > +
> > +description:
> > +  The Cadence MHDP Displayport TX interface.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - cdns,mhdp-imx8mq-dp
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description: MHDP DP APB clock.
> > +
> > +  phys:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Hotplug cable plugin.
> > +      - description: Hotplug cable plugout.
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: plug_in
> > +      - const: plug_out
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Input port from display controller output.
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port to DP connector.
> > +
> > +    required:
> > +      - port@0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - interrupts
> > +  - interrupt-names
> > +  - phys
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/imx8mq-clock.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    mhdp_dp: dp-bridge@32c00000 {
> > +        compatible = "cdns,mhdp-imx8mq-dp";
> > +        reg = <0x32c00000 0x100000>;
> > +        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "plug_in", "plug_out";
> > +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> > +        phys = <&dp_phy>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +
> > +                mhdp_in: endpoint {
> > +                    remote-endpoint = <&dcss_out>;
> > +                };
> 
> As Rob suggested, you allowed property for output to DP port. However it is
> not in the example. If this is a bridge, what does it bridge if there is no output
> connector?
> 
OK, I got it. Output connector will be added to the example in the next version.
Thanks,
Sandor
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
new file mode 100644
index 000000000000..d82f3ceddaa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
@@ -0,0 +1,93 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp-imx8mq-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP Displayport bridge
+
+maintainers:
+  - Sandor Yu <Sandor.yu@nxp.com>
+
+description:
+  The Cadence MHDP Displayport TX interface.
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp-imx8mq-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: MHDP DP APB clock.
+
+  phys:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Hotplug cable plugin.
+      - description: Hotplug cable plugout.
+
+  interrupt-names:
+    items:
+      - const: plug_in
+      - const: plug_out
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port from display controller output.
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port to DP connector.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+  - phys
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mhdp_dp: dp-bridge@32c00000 {
+        compatible = "cdns,mhdp-imx8mq-dp";
+        reg = <0x32c00000 0x100000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "plug_in", "plug_out";
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+        phys = <&dp_phy>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mhdp_in: endpoint {
+                    remote-endpoint = <&dcss_out>;
+                };
+            };
+        };
+    };