mbox series

[0/3] AM62x SK EVM DT Sync + OSPI Support

Message ID 20221027145311.523528-1-d-gole@ti.com
Headers show
Series AM62x SK EVM DT Sync + OSPI Support | expand

Message

Dhruva Gole Oct. 27, 2022, 2:53 p.m. UTC 
* Sync the AM62x DTS files with the linux kernel.
* Also add configs necessary to enable ospi in uboot
* Add support for booting from OSPI Flash.

All changes have been tested on the AM62x SK EVM and the board
successfully reached u-boot prompt using OSPI Flash:

```
U-Boot SPL 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:24:55
+0530)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.7--v08.04.07 (Jolly Jellyfi')
Trying to boot from SPI
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.7(release):v2.7.0-dirty
NOTICE:  BL31: Built : 00:19:16, Sep 24 2022

U-Boot SPL 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:25:21
+0530)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.7--v08.04.07 (Jolly Jellyfi')
Trying to boot from SPI


U-Boot 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:25:21 +0530)

SoC:   AM62X SR1.0 GP
Model: Texas Instruments AM625 SK
DRAM:  2 GiB
Core:  47 devices, 18 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Net:   No ethernet found.
Hit any key to stop autoboot:  0
```

Also the board was tested to boot till linux kernel after the DT sync
changes. Hence verifying that the changes are valid.

Dhruva Gole (3):
  arm: dts: k3-am62x: sync dt with linux kernel
  arm: dts: Add OSPI support for AM62-SK
  configs: enable OSPI related configs in AM62x

 arch/arm/dts/k3-am62-main.dtsi       |  54 ++++
 arch/arm/dts/k3-am62-mcu.dtsi        |  28 +++
 arch/arm/dts/k3-am62.dtsi            |   1 +
 arch/arm/dts/k3-am625-r5-sk.dts      |   5 +
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |  24 ++
 arch/arm/dts/k3-am625-sk.dts         | 354 +++++++++++++++++++++++++++
 configs/am62x_evm_a53_defconfig      |  19 ++
 configs/am62x_evm_r5_defconfig       |  22 ++
 8 files changed, 507 insertions(+)

Comments

Dhruva Gole Oct. 27, 2022, 3:15 p.m. UTC | #1 
On 27/10/22 20:23, Dhruva Gole wrote:
> * Sync the AM62x DTS files with the linux kernel.
> * Also add configs necessary to enable ospi in uboot
> * Add support for booting from OSPI Flash.
>
> All changes have been tested on the AM62x SK EVM and the board
> successfully reached u-boot prompt using OSPI Flash:
>
> ```
> U-Boot SPL 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:24:55
> +0530)
> SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.7--v08.04.07 (Jolly Jellyfi')
> Trying to boot from SPI
> Starting ATF on ARM64 core...
>
> NOTICE:  BL31: v2.7(release):v2.7.0-dirty
> NOTICE:  BL31: Built : 00:19:16, Sep 24 2022
>
> U-Boot SPL 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:25:21
> +0530)
> SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.7--v08.04.07 (Jolly Jellyfi')
> Trying to boot from SPI
>
>
> U-Boot 2022.10-00677-g160b1b2cd007-dirty (Oct 27 2022 - 14:25:21 +0530)
>
> SoC:   AM62X SR1.0 GP
> Model: Texas Instruments AM625 SK
> DRAM:  2 GiB
> Core:  47 devices, 18 uclasses, devicetree: separate
> MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
> Loading Environment from nowhere... OK
> In:    serial@2800000
> Out:   serial@2800000
> Err:   serial@2800000
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> ```
>
> Also the board was tested to boot till linux kernel after the DT sync
> changes. Hence verifying that the changes are valid.
Additionally, it is also worth noting that this effort of syncing the DT 
with upstream linux kernel seems to have also gotten the am62x-sk evm's 
on-board emmc to work (which is mmc dev 0).

I have tested the same after booting to uboot prompt from the SD Card 
and then selecting mmc dev 0.

I tested erase, write and read operations and then compared the data 
written to and from the mmc dev 0 and the data remained intact.

>
> Dhruva Gole (3):
>    arm: dts: k3-am62x: sync dt with linux kernel
>    arm: dts: Add OSPI support for AM62-SK
>    configs: enable OSPI related configs in AM62x
>
>   arch/arm/dts/k3-am62-main.dtsi       |  54 ++++
>   arch/arm/dts/k3-am62-mcu.dtsi        |  28 +++
>   arch/arm/dts/k3-am62.dtsi            |   1 +
>   arch/arm/dts/k3-am625-r5-sk.dts      |   5 +
>   arch/arm/dts/k3-am625-sk-u-boot.dtsi |  24 ++
>   arch/arm/dts/k3-am625-sk.dts         | 354 +++++++++++++++++++++++++++
>   configs/am62x_evm_a53_defconfig      |  19 ++
>   configs/am62x_evm_r5_defconfig       |  22 ++
>   8 files changed, 507 insertions(+)
>