diff mbox series

[v5,26/34] dt-bindings: pinctrl: qcom,qcm2290: fix matching pin config

Message ID 20221016170035.35014-27-krzysztof.kozlowski@linaro.org
State New
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (third set) | expand

Commit Message

Krzysztof Kozlowski Oct. 16, 2022, 5 p.m. UTC 
The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
(level one and two) are not properly matched.  This method also unifies
the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/qcom,qcm2290-pinctrl.yaml           | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski Oct. 17, 2022, 8:08 p.m. UTC | #1 
On Sun, 16 Oct 2022 13:00:27 -0400, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.  This method also unifies
> the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
> 
> 

Applied, thanks!

[26/34] dt-bindings: pinctrl: qcom,qcm2290: fix matching pin config
        https://git.kernel.org/krzk/linux-dt/c/7d3da666f2c0f9416f6d1a2c436b87a6d9f61e79

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 3f4f1c0360b5..5324b61eb4f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -50,8 +50,9 @@  patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-qcm2290-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-qcm2290-tlmm-state:
@@ -146,19 +147,19 @@  examples:
         gpio-ranges = <&tlmm 0 0 127>;
 
         sdc2_on_state: sdc2-on-state {
-            clk {
+            clk-pins {
                 pins = "sdc2_clk";
                 bias-disable;
                 drive-strength = <16>;
             };
 
-            cmd {
+            cmd-pins {
                 pins = "sdc2_cmd";
                 bias-pull-up;
                 drive-strength = <10>;
             };
 
-            data {
+            data-pins {
                 pins = "sdc2_data";
                 bias-pull-up;
                 drive-strength = <10>;