| Message ID | 20220928210059.891387-1-daniel.lezcano@linaro.org |
|---|---|
| Headers | show |
| Series | Rework the trip points creation | expand |
Hi Rafael, are you happy with the changes? I would like to integrate those changes with the thermal pull request On 28/09/2022 23:00, Daniel Lezcano wrote: > This work is the pre-requisite of handling correctly when the trip > point are crossed. For that we need to rework how the trip points are > declared and assigned to a thermal zone. > > Even if it appears to be a common sense to have the trip points being > ordered, this no guarantee neither documentation telling that is the > case. > > One solution could have been to create an ordered array of trips built > when registering the thermal zone by calling the different get_trip* > ops. However those ops receive a thermal zone pointer which is not > known as it is in the process of creating it. > > This cyclic dependency shows we have to rework how we manage the trip > points. > > Actually, all the trip points definition can be common to the backend > sensor drivers and we can factor out the thermal trip structure in all > of them. > > Then, as we register the thermal trips array, they will be available > in the thermal zone structure and a core function can return the trip > given its id. > > The get_trip_* ops won't be needed anymore and could be removed. The > resulting code will be another step forward to a self encapsulated > generic thermal framework. > > Most of the drivers can be converted more or less easily. This series > does a first round with most of the drivers. Some remain and will be > converted but with a smaller set of changes as the conversion is a bit > more complex. > > Changelog: > v7: > - Added missing return 0 in the x86_pkg_temp driver > v6: > - Improved the code for the get_crit_temp() function as suggested by Rafael > - Removed inner parenthesis in the set_trip_temp() function and invert the > conditions. Check the type of the trip point is unchanged > - Folded patch 4 with 1 > - Add per thermal zone info message in the bang-bang governor > - Folded the fix for an uninitialized variable in int340x_thermal_zone_add() > v5: > - Fixed a deadlock when calling thermal_zone_get_trip() while > handling the thermal zone lock > - Remove an extra line in the sysfs change > - Collected tags > v4: > - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski > - Collected tags > v3: > - Reorg the series to be git-bisect safe > - Added the set_trip generic function > - Added the get_crit_temp generic function > - Removed more dead code in the thermal-of > - Fixed the exynos changelog > - Fixed the error check for the exynos drivers > - Collected tags > v2: > - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() > - Removed tab whitespace in the acerhdf driver > - Collected tags > > Cc: Raju Rangoju <rajur@chelsio.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Peter Kaestle <peter@piie.net> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: Mark Gross <markgross@kernel.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Amit Kucheria <amitk@kernel.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> > Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: Support Opensource <support.opensource@diasemi.com> > Cc: Lukasz Luba <lukasz.luba@arm.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: Thara Gopinath <thara.gopinath@linaro.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> > Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Cc: Alim Akhtar <alim.akhtar@samsung.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Eduardo Valentin <edubezval@gmail.com> > Cc: Keerthy <j-keerthy@ti.com> > Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > Cc: Masami Hiramatsu <mhiramat@kernel.org> > Cc: Antoine Tenart <atenart@kernel.org> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > Cc: Dmitry Osipenko <digetx@gmail.com> > Cc: netdev@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: platform-driver-x86@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-arm-msm@vger.kernel.org > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-samsung-soc@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-omap@vger.kernel.org > > Daniel Lezcano (29): > thermal/core: Add a generic thermal_zone_get_trip() function > thermal/sysfs: Always expose hysteresis attributes > thermal/core: Add a generic thermal_zone_set_trip() function > thermal/core/governors: Use thermal_zone_get_trip() instead of ops > functions > thermal/of: Use generic thermal_zone_get_trip() function > thermal/of: Remove unused functions > thermal/drivers/exynos: Use generic thermal_zone_get_trip() function > thermal/drivers/exynos: of_thermal_get_ntrips() > thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by > thermal_zone_get_trip() > thermal/drivers/tegra: Use generic thermal_zone_get_trip() function > thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function > thermal/drivers/hisi: Use generic thermal_zone_get_trip() function > thermal/drivers/qcom: Use generic thermal_zone_get_trip() function > thermal/drivers/armada: Use generic thermal_zone_get_trip() function > thermal/drivers/rcar_gen3: Use the generic function to get the number > of trips > thermal/of: Remove of_thermal_get_ntrips() > thermal/of: Remove of_thermal_is_trip_valid() > thermal/of: Remove of_thermal_set_trip_hyst() > thermal/of: Remove of_thermal_get_crit_temp() > thermal/drivers/st: Use generic trip points > thermal/drivers/imx: Use generic thermal_zone_get_trip() function > thermal/drivers/rcar: Use generic thermal_zone_get_trip() function > thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function > thermal/drivers/da9062: Use generic thermal_zone_get_trip() function > thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / > ti_thermal_trip_is_valid() > thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function > thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function > thermal/intel/int340x: Replace parameter to simplify > thermal/drivers/intel: Use generic thermal_zone_get_trip() function > > drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - > .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- > drivers/platform/x86/acerhdf.c | 73 +++----- > drivers/thermal/armada_thermal.c | 39 ++--- > drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- > drivers/thermal/da9062-thermal.c | 52 +----- > drivers/thermal/gov_bang_bang.c | 39 +++-- > drivers/thermal/gov_fair_share.c | 18 +- > drivers/thermal/gov_power_allocator.c | 51 +++--- > drivers/thermal/gov_step_wise.c | 22 ++- > drivers/thermal/hisi_thermal.c | 11 +- > drivers/thermal/imx_thermal.c | 72 +++----- > .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- > .../int340x_thermal/int340x_thermal_zone.h | 4 +- > .../processor_thermal_device.c | 10 +- > drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ > drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- > drivers/thermal/rcar_gen3_thermal.c | 2 +- > drivers/thermal/rcar_thermal.c | 53 +----- > drivers/thermal/samsung/exynos_tmu.c | 57 +++---- > drivers/thermal/st/st_thermal.c | 47 +---- > drivers/thermal/tegra/soctherm.c | 33 ++-- > drivers/thermal/tegra/tegra30-tsensor.c | 17 +- > drivers/thermal/thermal_core.c | 161 +++++++++++++++--- > drivers/thermal/thermal_core.h | 24 +-- > drivers/thermal/thermal_helpers.c | 28 +-- > drivers/thermal/thermal_netlink.c | 21 +-- > drivers/thermal/thermal_of.c | 116 ------------- > drivers/thermal/thermal_sysfs.c | 133 +++++---------- > drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- > drivers/thermal/uniphier_thermal.c | 27 ++- > include/linux/thermal.h | 10 ++ > 32 files changed, 560 insertions(+), 818 deletions(-) >
On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > > Hi Rafael, > > are you happy with the changes? I'll have a look and let you know. > I would like to integrate those changes with the thermal pull request Sure, but it looks like you've got only a few ACKs for these patches from the driver people. Wouldn't it be prudent to give them some more time to review the changes? > On 28/09/2022 23:00, Daniel Lezcano wrote: > > This work is the pre-requisite of handling correctly when the trip > > point are crossed. For that we need to rework how the trip points are > > declared and assigned to a thermal zone. > > > > Even if it appears to be a common sense to have the trip points being > > ordered, this no guarantee neither documentation telling that is the > > case. > > > > One solution could have been to create an ordered array of trips built > > when registering the thermal zone by calling the different get_trip* > > ops. However those ops receive a thermal zone pointer which is not > > known as it is in the process of creating it. > > > > This cyclic dependency shows we have to rework how we manage the trip > > points. > > > > Actually, all the trip points definition can be common to the backend > > sensor drivers and we can factor out the thermal trip structure in all > > of them. > > > > Then, as we register the thermal trips array, they will be available > > in the thermal zone structure and a core function can return the trip > > given its id. > > > > The get_trip_* ops won't be needed anymore and could be removed. The > > resulting code will be another step forward to a self encapsulated > > generic thermal framework. > > > > Most of the drivers can be converted more or less easily. This series > > does a first round with most of the drivers. Some remain and will be > > converted but with a smaller set of changes as the conversion is a bit > > more complex. > > > > Changelog: > > v7: > > - Added missing return 0 in the x86_pkg_temp driver > > v6: > > - Improved the code for the get_crit_temp() function as suggested by Rafael > > - Removed inner parenthesis in the set_trip_temp() function and invert the > > conditions. Check the type of the trip point is unchanged > > - Folded patch 4 with 1 > > - Add per thermal zone info message in the bang-bang governor > > - Folded the fix for an uninitialized variable in int340x_thermal_zone_add() > > v5: > > - Fixed a deadlock when calling thermal_zone_get_trip() while > > handling the thermal zone lock > > - Remove an extra line in the sysfs change > > - Collected tags > > v4: > > - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski > > - Collected tags > > v3: > > - Reorg the series to be git-bisect safe > > - Added the set_trip generic function > > - Added the get_crit_temp generic function > > - Removed more dead code in the thermal-of > > - Fixed the exynos changelog > > - Fixed the error check for the exynos drivers > > - Collected tags > > v2: > > - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() > > - Removed tab whitespace in the acerhdf driver > > - Collected tags > > > > Cc: Raju Rangoju <rajur@chelsio.com> > > Cc: "David S. Miller" <davem@davemloft.net> > > Cc: Eric Dumazet <edumazet@google.com> > > Cc: Jakub Kicinski <kuba@kernel.org> > > Cc: Paolo Abeni <pabeni@redhat.com> > > Cc: Peter Kaestle <peter@piie.net> > > Cc: Hans de Goede <hdegoede@redhat.com> > > Cc: Mark Gross <markgross@kernel.org> > > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > Cc: Amit Kucheria <amitk@kernel.org> > > Cc: Zhang Rui <rui.zhang@intel.com> > > Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> > > Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> > > Cc: Florian Fainelli <f.fainelli@gmail.com> > > Cc: Ray Jui <rjui@broadcom.com> > > Cc: Scott Branden <sbranden@broadcom.com> > > Cc: Support Opensource <support.opensource@diasemi.com> > > Cc: Lukasz Luba <lukasz.luba@arm.com> > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > > Cc: Fabio Estevam <festevam@gmail.com> > > Cc: NXP Linux Team <linux-imx@nxp.com> > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> > > Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Cc: Alim Akhtar <alim.akhtar@samsung.com> > > Cc: Thierry Reding <thierry.reding@gmail.com> > > Cc: Jonathan Hunter <jonathanh@nvidia.com> > > Cc: Eduardo Valentin <edubezval@gmail.com> > > Cc: Keerthy <j-keerthy@ti.com> > > Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > > Cc: Masami Hiramatsu <mhiramat@kernel.org> > > Cc: Antoine Tenart <atenart@kernel.org> > > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > > Cc: Dmitry Osipenko <digetx@gmail.com> > > Cc: netdev@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: platform-driver-x86@vger.kernel.org > > Cc: linux-pm@vger.kernel.org > > Cc: linux-rpi-kernel@lists.infradead.org > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: linux-arm-msm@vger.kernel.org > > Cc: linux-renesas-soc@vger.kernel.org > > Cc: linux-samsung-soc@vger.kernel.org > > Cc: linux-tegra@vger.kernel.org > > Cc: linux-omap@vger.kernel.org > > > > Daniel Lezcano (29): > > thermal/core: Add a generic thermal_zone_get_trip() function > > thermal/sysfs: Always expose hysteresis attributes > > thermal/core: Add a generic thermal_zone_set_trip() function > > thermal/core/governors: Use thermal_zone_get_trip() instead of ops > > functions > > thermal/of: Use generic thermal_zone_get_trip() function > > thermal/of: Remove unused functions > > thermal/drivers/exynos: Use generic thermal_zone_get_trip() function > > thermal/drivers/exynos: of_thermal_get_ntrips() > > thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by > > thermal_zone_get_trip() > > thermal/drivers/tegra: Use generic thermal_zone_get_trip() function > > thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function > > thermal/drivers/hisi: Use generic thermal_zone_get_trip() function > > thermal/drivers/qcom: Use generic thermal_zone_get_trip() function > > thermal/drivers/armada: Use generic thermal_zone_get_trip() function > > thermal/drivers/rcar_gen3: Use the generic function to get the number > > of trips > > thermal/of: Remove of_thermal_get_ntrips() > > thermal/of: Remove of_thermal_is_trip_valid() > > thermal/of: Remove of_thermal_set_trip_hyst() > > thermal/of: Remove of_thermal_get_crit_temp() > > thermal/drivers/st: Use generic trip points > > thermal/drivers/imx: Use generic thermal_zone_get_trip() function > > thermal/drivers/rcar: Use generic thermal_zone_get_trip() function > > thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function > > thermal/drivers/da9062: Use generic thermal_zone_get_trip() function > > thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / > > ti_thermal_trip_is_valid() > > thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function > > thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function > > thermal/intel/int340x: Replace parameter to simplify > > thermal/drivers/intel: Use generic thermal_zone_get_trip() function > > > > drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - > > .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- > > drivers/platform/x86/acerhdf.c | 73 +++----- > > drivers/thermal/armada_thermal.c | 39 ++--- > > drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- > > drivers/thermal/da9062-thermal.c | 52 +----- > > drivers/thermal/gov_bang_bang.c | 39 +++-- > > drivers/thermal/gov_fair_share.c | 18 +- > > drivers/thermal/gov_power_allocator.c | 51 +++--- > > drivers/thermal/gov_step_wise.c | 22 ++- > > drivers/thermal/hisi_thermal.c | 11 +- > > drivers/thermal/imx_thermal.c | 72 +++----- > > .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- > > .../int340x_thermal/int340x_thermal_zone.h | 4 +- > > .../processor_thermal_device.c | 10 +- > > drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ > > drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- > > drivers/thermal/rcar_gen3_thermal.c | 2 +- > > drivers/thermal/rcar_thermal.c | 53 +----- > > drivers/thermal/samsung/exynos_tmu.c | 57 +++---- > > drivers/thermal/st/st_thermal.c | 47 +---- > > drivers/thermal/tegra/soctherm.c | 33 ++-- > > drivers/thermal/tegra/tegra30-tsensor.c | 17 +- > > drivers/thermal/thermal_core.c | 161 +++++++++++++++--- > > drivers/thermal/thermal_core.h | 24 +-- > > drivers/thermal/thermal_helpers.c | 28 +-- > > drivers/thermal/thermal_netlink.c | 21 +-- > > drivers/thermal/thermal_of.c | 116 ------------- > > drivers/thermal/thermal_sysfs.c | 133 +++++---------- > > drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- > > drivers/thermal/uniphier_thermal.c | 27 ++- > > include/linux/thermal.h | 10 ++ > > 32 files changed, 560 insertions(+), 818 deletions(-) > > > > > -- > <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > <http://twitter.com/#!/linaroorg> Twitter | > <http://www.linaro.org/linaro-blog/> Blog
On 29/09/2022 15:58, Rafael J. Wysocki wrote: > On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano > <daniel.lezcano@linaro.org> wrote: >> >> >> Hi Rafael, >> >> are you happy with the changes? > > I'll have a look and let you know. Great, thanks > >> I would like to integrate those changes with the thermal pull request > > Sure, but it looks like you've got only a few ACKs for these patches > from the driver people. > > Wouldn't it be prudent to give them some more time to review the changes? Well I would say I received the ACKs from the drivers which are actively maintained. Others are either not with a dedicated maintainer or not a reactive one. The first iteration of the series is from August 5th. So it has been 2 months. I pinged for imx, armada and tegra two weeks ago. The st, hisilicon drivers fall under the thermal maintainers umbrella There are three series coming after this series to be posted. I would like to go forward in the process of cleaning up the framework. IMO two months is enough to let the maintainers pay attention to the changes, especially if we do a gentle ping and there are seven versions. And after that comes the thermal_zone_device_register() parameters simplification :) [ ... ]
On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > On 29/09/2022 15:58, Rafael J. Wysocki wrote: > > On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano > > <daniel.lezcano@linaro.org> wrote: > >> > >> > >> Hi Rafael, > >> > >> are you happy with the changes? > > > > I'll have a look and let you know. > > Great, thanks Well, because you have not added the history of changes to the patches, that will take more time than it would otherwise. Generally, please always add information on what has changed in the patch between different versions of it. > >> I would like to integrate those changes with the thermal pull request > > > > Sure, but it looks like you've got only a few ACKs for these patches > > from the driver people. > > > > Wouldn't it be prudent to give them some more time to review the changes? > > Well I would say I received the ACKs from the drivers which are actively > maintained. Others are either not with a dedicated maintainer or not a > reactive one. The first iteration of the series is from August 5th. So > it has been 2 months. > > I pinged for imx, armada and tegra two weeks ago. OK > The st, hisilicon drivers fall under the thermal maintainers umbrella > > There are three series coming after this series to be posted. I would > like to go forward in the process of cleaning up the framework. IMO two > months is enough to let the maintainers pay attention to the changes, > especially if we do a gentle ping and there are seven versions. > > And after that comes the thermal_zone_device_register() parameters > simplification :) Well, that's all fine, but I don't want people to get surprised by significant changes they haven't expected and I want to avoid missing anything subtle.
On Thu, Sep 29, 2022 at 9:35 PM Rafael J. Wysocki <rafael@kernel.org> wrote: > > On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano > <daniel.lezcano@linaro.org> wrote: > > > > On 29/09/2022 15:58, Rafael J. Wysocki wrote: > > > On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano > > > <daniel.lezcano@linaro.org> wrote: > > >> > > >> > > >> Hi Rafael, > > >> > > >> are you happy with the changes? > > > > > > I'll have a look and let you know. > > > > Great, thanks > > Well, because you have not added the history of changes to the > patches, that will take more time than it would otherwise. Done. I've sent ACKs and still had a comment on one patch (minor but still). When that is addressed, the four initial core patches should be good to go in. I'm trusting you regarding the thermal/of changes (even though I think that it would be good if someone involved in that code could review them) and if you are confident about all of the driver changes, they are fine with me too.
Hi Rafael and Daniel On 9/30/22 18:39, Rafael J. Wysocki wrote: > On Thu, Sep 29, 2022 at 9:35 PM Rafael J. Wysocki <rafael@kernel.org> wrote: >> >> On Thu, Sep 29, 2022 at 4:57 PM Daniel Lezcano >> <daniel.lezcano@linaro.org> wrote: >>> >>> On 29/09/2022 15:58, Rafael J. Wysocki wrote: >>>> On Thu, Sep 29, 2022 at 2:26 PM Daniel Lezcano >>>> <daniel.lezcano@linaro.org> wrote: >>>>> >>>>> >>>>> Hi Rafael, >>>>> >>>>> are you happy with the changes? >>>> >>>> I'll have a look and let you know. >>> >>> Great, thanks >> >> Well, because you have not added the history of changes to the >> patches, that will take more time than it would otherwise. > > Done. I've sent ACKs and still had a comment on one patch (minor but > still). When that is addressed, the four initial core patches should > be good to go in. > > I'm trusting you regarding the thermal/of changes (even though I think > that it would be good if someone involved in that code could review > them) and if you are confident about all of the driver changes, they > are fine with me too. Sorry for being late. I have been busy with some internal bug hunting. I'll check the code today and test it on my dev boards. Regards, Lukasz
This work is the pre-requisite of handling correctly when the trip point are crossed. For that we need to rework how the trip points are declared and assigned to a thermal zone. Even if it appears to be a common sense to have the trip points being ordered, this no guarantee neither documentation telling that is the case. One solution could have been to create an ordered array of trips built when registering the thermal zone by calling the different get_trip* ops. However those ops receive a thermal zone pointer which is not known as it is in the process of creating it. This cyclic dependency shows we have to rework how we manage the trip points. Actually, all the trip points definition can be common to the backend sensor drivers and we can factor out the thermal trip structure in all of them. Then, as we register the thermal trips array, they will be available in the thermal zone structure and a core function can return the trip given its id. The get_trip_* ops won't be needed anymore and could be removed. The resulting code will be another step forward to a self encapsulated generic thermal framework. Most of the drivers can be converted more or less easily. This series does a first round with most of the drivers. Some remain and will be converted but with a smaller set of changes as the conversion is a bit more complex. Changelog: v7: - Added missing return 0 in the x86_pkg_temp driver v6: - Improved the code for the get_crit_temp() function as suggested by Rafael - Removed inner parenthesis in the set_trip_temp() function and invert the conditions. Check the type of the trip point is unchanged - Folded patch 4 with 1 - Add per thermal zone info message in the bang-bang governor - Folded the fix for an uninitialized variable in int340x_thermal_zone_add() v5: - Fixed a deadlock when calling thermal_zone_get_trip() while handling the thermal zone lock - Remove an extra line in the sysfs change - Collected tags v4: - Remove extra lines on exynos changes as reported by Krzysztof Kozlowski - Collected tags v3: - Reorg the series to be git-bisect safe - Added the set_trip generic function - Added the get_crit_temp generic function - Removed more dead code in the thermal-of - Fixed the exynos changelog - Fixed the error check for the exynos drivers - Collected tags v2: - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip() - Removed tab whitespace in the acerhdf driver - Collected tags Cc: Raju Rangoju <rajur@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Peter Kaestle <peter@piie.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amitk@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Support Opensource <support.opensource@diasemi.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Antoine Tenart <atenart@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Daniel Lezcano (29): thermal/core: Add a generic thermal_zone_get_trip() function thermal/sysfs: Always expose hysteresis attributes thermal/core: Add a generic thermal_zone_set_trip() function thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions thermal/of: Use generic thermal_zone_get_trip() function thermal/of: Remove unused functions thermal/drivers/exynos: Use generic thermal_zone_get_trip() function thermal/drivers/exynos: of_thermal_get_ntrips() thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip() thermal/drivers/tegra: Use generic thermal_zone_get_trip() function thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function thermal/drivers/hisi: Use generic thermal_zone_get_trip() function thermal/drivers/qcom: Use generic thermal_zone_get_trip() function thermal/drivers/armada: Use generic thermal_zone_get_trip() function thermal/drivers/rcar_gen3: Use the generic function to get the number of trips thermal/of: Remove of_thermal_get_ntrips() thermal/of: Remove of_thermal_is_trip_valid() thermal/of: Remove of_thermal_set_trip_hyst() thermal/of: Remove of_thermal_get_crit_temp() thermal/drivers/st: Use generic trip points thermal/drivers/imx: Use generic thermal_zone_get_trip() function thermal/drivers/rcar: Use generic thermal_zone_get_trip() function thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function thermal/drivers/da9062: Use generic thermal_zone_get_trip() function thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ti_thermal_trip_is_valid() thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function thermal/intel/int340x: Replace parameter to simplify thermal/drivers/intel: Use generic thermal_zone_get_trip() function drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 - .../ethernet/chelsio/cxgb4/cxgb4_thermal.c | 41 +---- drivers/platform/x86/acerhdf.c | 73 +++----- drivers/thermal/armada_thermal.c | 39 ++--- drivers/thermal/broadcom/bcm2835_thermal.c | 8 +- drivers/thermal/da9062-thermal.c | 52 +----- drivers/thermal/gov_bang_bang.c | 39 +++-- drivers/thermal/gov_fair_share.c | 18 +- drivers/thermal/gov_power_allocator.c | 51 +++--- drivers/thermal/gov_step_wise.c | 22 ++- drivers/thermal/hisi_thermal.c | 11 +- drivers/thermal/imx_thermal.c | 72 +++----- .../int340x_thermal/int340x_thermal_zone.c | 33 ++-- .../int340x_thermal/int340x_thermal_zone.h | 4 +- .../processor_thermal_device.c | 10 +- drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 +++++++------ drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 ++--- drivers/thermal/rcar_gen3_thermal.c | 2 +- drivers/thermal/rcar_thermal.c | 53 +----- drivers/thermal/samsung/exynos_tmu.c | 57 +++---- drivers/thermal/st/st_thermal.c | 47 +---- drivers/thermal/tegra/soctherm.c | 33 ++-- drivers/thermal/tegra/tegra30-tsensor.c | 17 +- drivers/thermal/thermal_core.c | 161 +++++++++++++++--- drivers/thermal/thermal_core.h | 24 +-- drivers/thermal/thermal_helpers.c | 28 +-- drivers/thermal/thermal_netlink.c | 21 +-- drivers/thermal/thermal_of.c | 116 ------------- drivers/thermal/thermal_sysfs.c | 133 +++++---------- drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 -- drivers/thermal/uniphier_thermal.c | 27 ++- include/linux/thermal.h | 10 ++ 32 files changed, 560 insertions(+), 818 deletions(-)