| Message ID | 20220425070634.28227-1-yangyicong@hisilicon.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI/ACPI: Always advertise ASPM support if CONFIG_PCIEASPM=y | expand |
On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: > When we have CONFIG_PCIEASPM enabled it means OS can always support ASPM no > matter user have disabled it through pcie_aspm=off or not. But currently we > won't advertise ASPM support in _OSC negotiation if user disables it, which > doesn't match the fact. This will also have side effects that other PCIe > services like AER and hotplug will be disabled as ASPM support is required > and we won't negotiate other services if ASPM support is absent. > > So this patch makes OS always advertising ASPM support if CONFIG_PCIEASPM=y. > It intends no functional change to pcie_aspm=off as it will still mark > aspm_disabled=1 and aspm_support_enabled=false, driver will check these > status before configuring ASPM. > > Tested this patch with pcie_aspm=off: > estuary:/$ dmesg | egrep -i "aspm|osc" > [ 0.000000] PCIe ASPM is disabled > [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > ClockPM Segments MSI EDR HPX-Type3] > [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] > [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME > AER PCIeCapability DPC] > estuary:/sys/module/pcie_aspm/parameters$ cat policy > [default] performance powersave powersupersave > estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy > bash: echo: write error: Operation not permitted > > Cc: Rafael J. Wysocki <rafael@kernel.org> > Suggested-by: Bjorn Helgaas <bhelgaas@google.com> > [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] > Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> > --- > drivers/acpi/pci_root.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > index 6f9e75d14808..17e78582e633 100644 > --- a/drivers/acpi/pci_root.c > +++ b/drivers/acpi/pci_root.c > @@ -393,7 +393,7 @@ static u32 calculate_support(void) > support |= OSC_PCI_HPX_TYPE_3_SUPPORT; > if (pci_ext_cfg_avail()) > support |= OSC_PCI_EXT_CONFIG_SUPPORT; > - if (pcie_aspm_support_enabled()) > + if (IS_ENABLED(CONFIG_PCIEASPM)) Is there any way firmware could tell the difference between "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with 'pcie_aspm=off'"? If not, why would we even check whether CONFIG_PCIEASPM is set? > support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT; > if (pci_msi_enabled()) > support |= OSC_PCI_MSI_SUPPORT; > -- > 2.24.0 >
On 2022/5/4 6:38, Bjorn Helgaas wrote: > On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: >> When we have CONFIG_PCIEASPM enabled it means OS can always support ASPM no >> matter user have disabled it through pcie_aspm=off or not. But currently we >> won't advertise ASPM support in _OSC negotiation if user disables it, which >> doesn't match the fact. This will also have side effects that other PCIe >> services like AER and hotplug will be disabled as ASPM support is required >> and we won't negotiate other services if ASPM support is absent. >> >> So this patch makes OS always advertising ASPM support if CONFIG_PCIEASPM=y. >> It intends no functional change to pcie_aspm=off as it will still mark >> aspm_disabled=1 and aspm_support_enabled=false, driver will check these >> status before configuring ASPM. >> >> Tested this patch with pcie_aspm=off: >> estuary:/$ dmesg | egrep -i "aspm|osc" >> [ 0.000000] PCIe ASPM is disabled >> [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM >> ClockPM Segments MSI EDR HPX-Type3] >> [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] >> [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME >> AER PCIeCapability DPC] >> estuary:/sys/module/pcie_aspm/parameters$ cat policy >> [default] performance powersave powersupersave >> estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy >> bash: echo: write error: Operation not permitted >> >> Cc: Rafael J. Wysocki <rafael@kernel.org> >> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> >> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] >> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> >> --- >> drivers/acpi/pci_root.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c >> index 6f9e75d14808..17e78582e633 100644 >> --- a/drivers/acpi/pci_root.c >> +++ b/drivers/acpi/pci_root.c >> @@ -393,7 +393,7 @@ static u32 calculate_support(void) >> support |= OSC_PCI_HPX_TYPE_3_SUPPORT; >> if (pci_ext_cfg_avail()) >> support |= OSC_PCI_EXT_CONFIG_SUPPORT; >> - if (pcie_aspm_support_enabled()) >> + if (IS_ENABLED(CONFIG_PCIEASPM)) > > Is there any way firmware could tell the difference between > "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with > 'pcie_aspm=off'"? > > If not, why would we even check whether CONFIG_PCIEASPM is set? > If we announce ASPM support when CONFIG_PCIEASPM=n it'll work as well but negotiation and the log don't match the fact. We'll get misleading messages that ASPM is supported by OS by it cannot be enable as there's no driver. As mentioned by the PCIe Firmware Spec r3.3, "ASPM Optionality supported The operating system sets this bit to 1 if it properly recognizes and manages ASPM support on PCI Express components which report support for ASPM L1 only in the ASPM Support field within the Link Capabilities Register. Otherwise, the operating system sets this bit to 0" When CONFIG_PCIEASPM=n we have no aspm driver and apparently cannot support any ASPM features so we should set the bit to 0 to match the spec. >> support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT; >> if (pci_msi_enabled()) >> support |= OSC_PCI_MSI_SUPPORT; >> -- >> 2.24.0 >> > . >
On Thu, May 05, 2022 at 08:36:42PM +0800, Yicong Yang wrote: > On 2022/5/4 6:38, Bjorn Helgaas wrote: > > On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: > >> When we have CONFIG_PCIEASPM enabled it means OS can always support ASPM no > >> matter user have disabled it through pcie_aspm=off or not. But currently we > >> won't advertise ASPM support in _OSC negotiation if user disables it, which > >> doesn't match the fact. This will also have side effects that other PCIe > >> services like AER and hotplug will be disabled as ASPM support is required > >> and we won't negotiate other services if ASPM support is absent. > >> > >> So this patch makes OS always advertising ASPM support if CONFIG_PCIEASPM=y. > >> It intends no functional change to pcie_aspm=off as it will still mark > >> aspm_disabled=1 and aspm_support_enabled=false, driver will check these > >> status before configuring ASPM. > >> > >> Tested this patch with pcie_aspm=off: > >> estuary:/$ dmesg | egrep -i "aspm|osc" > >> [ 0.000000] PCIe ASPM is disabled > >> [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > >> ClockPM Segments MSI EDR HPX-Type3] > >> [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] > >> [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME > >> AER PCIeCapability DPC] > >> estuary:/sys/module/pcie_aspm/parameters$ cat policy > >> [default] performance powersave powersupersave > >> estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy > >> bash: echo: write error: Operation not permitted > >> > >> Cc: Rafael J. Wysocki <rafael@kernel.org> > >> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> > >> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] > >> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> > >> --- > >> drivers/acpi/pci_root.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > >> index 6f9e75d14808..17e78582e633 100644 > >> --- a/drivers/acpi/pci_root.c > >> +++ b/drivers/acpi/pci_root.c > >> @@ -393,7 +393,7 @@ static u32 calculate_support(void) > >> support |= OSC_PCI_HPX_TYPE_3_SUPPORT; > >> if (pci_ext_cfg_avail()) > >> support |= OSC_PCI_EXT_CONFIG_SUPPORT; > >> - if (pcie_aspm_support_enabled()) > >> + if (IS_ENABLED(CONFIG_PCIEASPM)) > > > > Is there any way firmware could tell the difference between > > "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with > > 'pcie_aspm=off'"? > > > > If not, why would we even check whether CONFIG_PCIEASPM is set? > > If we announce ASPM support when CONFIG_PCIEASPM=n it'll work as well > but negotiation and the log don't match the fact. We'll get misleading > messages that ASPM is supported by OS by it cannot be enable as there's > no driver. > > As mentioned by the PCIe Firmware Spec r3.3, > "ASPM Optionality supported > The operating system sets this bit to 1 if it properly recognizes > and manages ASPM support on PCI Express components which report > support for ASPM L1 only in the ASPM Support field within the Link > Capabilities Register. Otherwise, the operating system sets this > bit to 0" Yes. I don't completely understand this bit, but I think it's related to the fact that L0s support was originally required for all links, so the only defined ASPM Support encodings were these: 01b - L0s supported 11b - L0s and L1 supported The "ASPM Optionality" ECN [1] of June 19, 2009, added these new encodings: 00b - No ASPM support 10b - L1 supported So I think the _OSC "ASPM Optionality Supported" bit tells the firmware that the OS supports this new possibility of devices that support L1 but not L0s. Linux currently never sets the "ASPM Optionality Supported" bit, but it probably should, because I think we *do* support L1 even if L0s isn't supported. > When CONFIG_PCIEASPM=n we have no aspm driver and apparently cannot > support any ASPM features so we should set the bit to 0 to match the spec. I think you're saying that firmware could not tell the difference, but the Linux log messages might be slightly misleading. I assume you mean this message: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] where we would claim that we support ASPM even when CONFIG_PCIEASPM is unset. The purpose of that message is to expose what Linux is telling the platform via _OSC. If we're telling the platform we support ASPM, I think the message should reflect that. But I'm actually not sure there's real value in advertising ASPM support to the platform when CONFIG_PCIEASPM=y but we're booted with "pcie_aspm=off". It sounds like this was found by using that option (even though it wasn't *needed*) and finding that Linux didn't request control of other PCIe services. I don't know if that's worth changing. > >> support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT; > >> if (pci_msi_enabled()) > >> support |= OSC_PCI_MSI_SUPPORT; [1] https://members.pcisig.com/wg/PCI-SIG/document/8348
On 2022/5/6 2:41, Bjorn Helgaas wrote: > On Thu, May 05, 2022 at 08:36:42PM +0800, Yicong Yang wrote: >> On 2022/5/4 6:38, Bjorn Helgaas wrote: >>> On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: >>>> When we have CONFIG_PCIEASPM enabled it means OS can always support ASPM no >>>> matter user have disabled it through pcie_aspm=off or not. But currently we >>>> won't advertise ASPM support in _OSC negotiation if user disables it, which >>>> doesn't match the fact. This will also have side effects that other PCIe >>>> services like AER and hotplug will be disabled as ASPM support is required >>>> and we won't negotiate other services if ASPM support is absent. >>>> >>>> So this patch makes OS always advertising ASPM support if CONFIG_PCIEASPM=y. >>>> It intends no functional change to pcie_aspm=off as it will still mark >>>> aspm_disabled=1 and aspm_support_enabled=false, driver will check these >>>> status before configuring ASPM. >>>> >>>> Tested this patch with pcie_aspm=off: >>>> estuary:/$ dmesg | egrep -i "aspm|osc" >>>> [ 0.000000] PCIe ASPM is disabled >>>> [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM >>>> ClockPM Segments MSI EDR HPX-Type3] >>>> [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] >>>> [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME >>>> AER PCIeCapability DPC] >>>> estuary:/sys/module/pcie_aspm/parameters$ cat policy >>>> [default] performance powersave powersupersave >>>> estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy >>>> bash: echo: write error: Operation not permitted >>>> >>>> Cc: Rafael J. Wysocki <rafael@kernel.org> >>>> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> >>>> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] >>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> >>>> --- >>>> drivers/acpi/pci_root.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c >>>> index 6f9e75d14808..17e78582e633 100644 >>>> --- a/drivers/acpi/pci_root.c >>>> +++ b/drivers/acpi/pci_root.c >>>> @@ -393,7 +393,7 @@ static u32 calculate_support(void) >>>> support |= OSC_PCI_HPX_TYPE_3_SUPPORT; >>>> if (pci_ext_cfg_avail()) >>>> support |= OSC_PCI_EXT_CONFIG_SUPPORT; >>>> - if (pcie_aspm_support_enabled()) >>>> + if (IS_ENABLED(CONFIG_PCIEASPM)) >>> >>> Is there any way firmware could tell the difference between >>> "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with >>> 'pcie_aspm=off'"? >>> >>> If not, why would we even check whether CONFIG_PCIEASPM is set? >> >> If we announce ASPM support when CONFIG_PCIEASPM=n it'll work as well >> but negotiation and the log don't match the fact. We'll get misleading >> messages that ASPM is supported by OS by it cannot be enable as there's >> no driver. >> >> As mentioned by the PCIe Firmware Spec r3.3, >> "ASPM Optionality supported >> The operating system sets this bit to 1 if it properly recognizes >> and manages ASPM support on PCI Express components which report >> support for ASPM L1 only in the ASPM Support field within the Link >> Capabilities Register. Otherwise, the operating system sets this >> bit to 0" > > Yes. I don't completely understand this bit, but I think it's related > to the fact that L0s support was originally required for all links, so > the only defined ASPM Support encodings were these: > > 01b - L0s supported > 11b - L0s and L1 supported > > The "ASPM Optionality" ECN [1] of June 19, 2009, added these new > encodings: > > 00b - No ASPM support > 10b - L1 supported > > So I think the _OSC "ASPM Optionality Supported" bit tells the > firmware that the OS supports this new possibility of devices that > support L1 but not L0s. > > Linux currently never sets the "ASPM Optionality Supported" bit, but > it probably should, because I think we *do* support L1 even if L0s > isn't supported. > Yes, it sounds sensible to me. Actually I intended to refer BIT[1] which we're currently using for advertising ASPM support in _OSC, but I copied the wrong field...apologize. "Active State Power Management supported The operating system sets this bit to 1 if it natively supports configuration of Active State Power Management registers in PCI Express devices. Otherwise, the operating system sets this bit to 0." IIUC, CONFIG_PCIEASPM=y means the OS *natively* support ASPM configuration so we should set this bit to 1 even if we boot with pcie_aspm=off; otherwise the OS has no native support of ASPM the bit should be 0. Currently the _OSC negotiation seems to violent the spec a bit when booting with pcie_aspm=off on a OS with CONFIG_PCIASPM=y. >> When CONFIG_PCIEASPM=n we have no aspm driver and apparently cannot >> support any ASPM features so we should set the bit to 0 to match the spec. > > I think you're saying that firmware could not tell the difference, but > the Linux log messages might be slightly misleading. I assume you > mean this message: > > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] > > where we would claim that we support ASPM even when CONFIG_PCIEASPM is > unset. > yes. That's what I mean misleading. > The purpose of that message is to expose what Linux is telling the > platform via _OSC. If we're telling the platform we support ASPM, I > think the message should reflect that. > agree. > But I'm actually not sure there's real value in advertising ASPM > support to the platform when CONFIG_PCIEASPM=y but we're booted with > "pcie_aspm=off". It sounds like this was found by using that option > (even though it wasn't *needed*) and finding that Linux didn't request > control of other PCIe services. I don't know if that's worth > changing. > It's found in one of our test scenes that the AER is not worked. The issue is implicit as AER is influenced by the ASPM which it shouldn't be. And the implementation of pcie_aspm=off seems don't follow the spec. This patch intends to make the code follow the spec in this corner case and by the way fixes the issue I met. In the general cases there intends no change. For the usage of pcie_aspm=off there may be cases of turning off ASPM when the firmware grant the control to the OS. On some platform user may disable ASPM through firmware by ACPI FADT, but on other platform OS may always get the control of ASPM so this provide a way of disabling it. But I think it's not proper to assume user doesn't want other services like AER either. Since we haven't met any realistic issue on this boot option, I'd really appreciate your suggestions on this. Regards, Yicong
On Mon, May 09, 2022 at 08:20:23PM +0800, Yicong Yang wrote: > On 2022/5/6 2:41, Bjorn Helgaas wrote: > > On Thu, May 05, 2022 at 08:36:42PM +0800, Yicong Yang wrote: > >> On 2022/5/4 6:38, Bjorn Helgaas wrote: > >>> On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: > >>>> When we have CONFIG_PCIEASPM enabled it means OS can always > >>>> support ASPM no matter user have disabled it through > >>>> pcie_aspm=off or not. But currently we won't advertise ASPM > >>>> support in _OSC negotiation if user disables it, which doesn't > >>>> match the fact. This will also have side effects that other > >>>> PCIe services like AER and hotplug will be disabled as ASPM > >>>> support is required and we won't negotiate other services if > >>>> ASPM support is absent. > >>>> > >>>> So this patch makes OS always advertising ASPM support if > >>>> CONFIG_PCIEASPM=y. It intends no functional change to > >>>> pcie_aspm=off as it will still mark aspm_disabled=1 and > >>>> aspm_support_enabled=false, driver will check these status > >>>> before configuring ASPM. > >>>> > >>>> Tested this patch with pcie_aspm=off: > >>>> estuary:/$ dmesg | egrep -i "aspm|osc" > >>>> [ 0.000000] PCIe ASPM is disabled > >>>> [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > >>>> ClockPM Segments MSI EDR HPX-Type3] > >>>> [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] > >>>> [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME > >>>> AER PCIeCapability DPC] > >>>> estuary:/sys/module/pcie_aspm/parameters$ cat policy > >>>> [default] performance powersave powersupersave > >>>> estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy > >>>> bash: echo: write error: Operation not permitted > >>>> > >>>> Cc: Rafael J. Wysocki <rafael@kernel.org> > >>>> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> > >>>> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] > >>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> > >>>> --- > >>>> drivers/acpi/pci_root.c | 2 +- > >>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>> > >>>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > >>>> index 6f9e75d14808..17e78582e633 100644 > >>>> --- a/drivers/acpi/pci_root.c > >>>> +++ b/drivers/acpi/pci_root.c > >>>> @@ -393,7 +393,7 @@ static u32 calculate_support(void) > >>>> support |= OSC_PCI_HPX_TYPE_3_SUPPORT; > >>>> if (pci_ext_cfg_avail()) > >>>> support |= OSC_PCI_EXT_CONFIG_SUPPORT; > >>>> - if (pcie_aspm_support_enabled()) > >>>> + if (IS_ENABLED(CONFIG_PCIEASPM)) > >>> > >>> Is there any way firmware could tell the difference between > >>> "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with > >>> 'pcie_aspm=off'"? > >>> > >>> If not, why would we even check whether CONFIG_PCIEASPM is set? > >> > >> If we announce ASPM support when CONFIG_PCIEASPM=n it'll work as well > >> but negotiation and the log don't match the fact. We'll get misleading > >> messages that ASPM is supported by OS by it cannot be enable as there's > >> no driver. > >> > >> As mentioned by the PCIe Firmware Spec r3.3, > >> "ASPM Optionality supported > >> The operating system sets this bit to 1 if it properly recognizes > >> and manages ASPM support on PCI Express components which report > >> support for ASPM L1 only in the ASPM Support field within the Link > >> Capabilities Register. Otherwise, the operating system sets this > >> bit to 0" > > > > Yes. I don't completely understand this bit, but I think it's related > > to the fact that L0s support was originally required for all links, so > > the only defined ASPM Support encodings were these: > > > > 01b - L0s supported > > 11b - L0s and L1 supported > > > > The "ASPM Optionality" ECN [1] of June 19, 2009, added these new > > encodings: > > > > 00b - No ASPM support > > 10b - L1 supported > > > > So I think the _OSC "ASPM Optionality Supported" bit tells the > > firmware that the OS supports this new possibility of devices that > > support L1 but not L0s. > > > > Linux currently never sets the "ASPM Optionality Supported" bit, but > > it probably should, because I think we *do* support L1 even if L0s > > isn't supported. > > Yes, it sounds sensible to me. Actually I intended to refer BIT[1] which we're > currently using for advertising ASPM support in _OSC, but I copied the wrong > field...apologize. > > "Active State Power Management supported > The operating system sets this bit to 1 if it natively supports configuration > of Active State Power Management registers in PCI Express devices. Otherwise, > the operating system sets this bit to 0." > > IIUC, CONFIG_PCIEASPM=y means the OS *natively* support ASPM configuration so > we should set this bit to 1 even if we boot with pcie_aspm=off; otherwise the > OS has no native support of ASPM the bit should be 0. Currently the _OSC > negotiation seems to violent the spec a bit when booting with pcie_aspm=off > on a OS with CONFIG_PCIASPM=y. We have three cases: 1) CONFIG_PCIEASPM=y Linux allocates ASPM link_state for downstream ports and manages ASPM. 2) CONFIG_PCIEASPM=y and booted with "pcie_aspm=off" aspm_support_enabled is false, so Linux does not allocate ASPM link_state and does not manage ASPM. There is no way to change aspm_support_enabled at runtime. pcie_aspm_get_link() always returns NULL, so ASPM cannot be enabled by drivers or by the sysfs knobs (aspm_ctrl_attrs[]). 3) CONFIG_PCIEASPM is unset aspm.c is not even compiled, so ASPM cannot be enabled by drivers or sysfs. Currently we set OSC_PCI_ASPM_SUPPORT only for case 1. This patch would set it for both case 1 and case 2. But I think case 2 and case 3 are indistinguishable from the platform's point of view. The only difference is that case 2 includes some ASPM code in the image that can never be used. I think part of the motivation for this patch is that we'd like AER, hotplug, etc to work even in case 2. We could make an argument for doing that, but then AER and hotplug should work even in case 3. If we want to do that, I think we should do it head-on by relaxing this test in os_control_query_checks(): if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) { decode_osc_support(root, "not requesting OS control; OS requires", ACPI_PCIE_REQ_SUPPORT); return false; } > >> When CONFIG_PCIEASPM=n we have no aspm driver and apparently cannot > >> support any ASPM features so we should set the bit to 0 to match the spec. > > > > I think you're saying that firmware could not tell the difference, but > > the Linux log messages might be slightly misleading. I assume you > > mean this message: > > > > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] > > > > where we would claim that we support ASPM even when CONFIG_PCIEASPM is > > unset. > > > > yes. That's what I mean misleading. > > > The purpose of that message is to expose what Linux is telling the > > platform via _OSC. If we're telling the platform we support ASPM, I > > think the message should reflect that. > > > > agree. > > > But I'm actually not sure there's real value in advertising ASPM > > support to the platform when CONFIG_PCIEASPM=y but we're booted with > > "pcie_aspm=off". It sounds like this was found by using that option > > (even though it wasn't *needed*) and finding that Linux didn't request > > control of other PCIe services. I don't know if that's worth > > changing. > > > > It's found in one of our test scenes that the AER is not worked. The issue > is implicit as AER is influenced by the ASPM which it shouldn't be. And > the implementation of pcie_aspm=off seems don't follow the spec. This patch > intends to make the code follow the spec in this corner case and by the way > fixes the issue I met. In the general cases there intends no change. > > For the usage of pcie_aspm=off there may be cases of turning off ASPM when > the firmware grant the control to the OS. On some platform user may disable > ASPM through firmware by ACPI FADT, but on other platform OS may always get > the control of ASPM so this provide a way of disabling it. But I think it's > not proper to assume user doesn't want other services like AER either. > > Since we haven't met any realistic issue on this boot option, I'd really > appreciate your suggestions on this. > > Regards, > Yicong
On 2022/6/26 3:01, Bjorn Helgaas wrote: > On Mon, May 09, 2022 at 08:20:23PM +0800, Yicong Yang wrote: >> On 2022/5/6 2:41, Bjorn Helgaas wrote: >>> On Thu, May 05, 2022 at 08:36:42PM +0800, Yicong Yang wrote: >>>> On 2022/5/4 6:38, Bjorn Helgaas wrote: >>>>> On Mon, Apr 25, 2022 at 03:06:34PM +0800, Yicong Yang wrote: >>>>>> When we have CONFIG_PCIEASPM enabled it means OS can always >>>>>> support ASPM no matter user have disabled it through >>>>>> pcie_aspm=off or not. But currently we won't advertise ASPM >>>>>> support in _OSC negotiation if user disables it, which doesn't >>>>>> match the fact. This will also have side effects that other >>>>>> PCIe services like AER and hotplug will be disabled as ASPM >>>>>> support is required and we won't negotiate other services if >>>>>> ASPM support is absent. >>>>>> >>>>>> So this patch makes OS always advertising ASPM support if >>>>>> CONFIG_PCIEASPM=y. It intends no functional change to >>>>>> pcie_aspm=off as it will still mark aspm_disabled=1 and >>>>>> aspm_support_enabled=false, driver will check these status >>>>>> before configuring ASPM. >>>>>> >>>>>> Tested this patch with pcie_aspm=off: >>>>>> estuary:/$ dmesg | egrep -i "aspm|osc" >>>>>> [ 0.000000] PCIe ASPM is disabled >>>>>> [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM >>>>>> ClockPM Segments MSI EDR HPX-Type3] >>>>>> [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] >>>>>> [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME >>>>>> AER PCIeCapability DPC] >>>>>> estuary:/sys/module/pcie_aspm/parameters$ cat policy >>>>>> [default] performance powersave powersupersave >>>>>> estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy >>>>>> bash: echo: write error: Operation not permitted >>>>>> >>>>>> Cc: Rafael J. Wysocki <rafael@kernel.org> >>>>>> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> >>>>>> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] >>>>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> >>>>>> --- >>>>>> drivers/acpi/pci_root.c | 2 +- >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c >>>>>> index 6f9e75d14808..17e78582e633 100644 >>>>>> --- a/drivers/acpi/pci_root.c >>>>>> +++ b/drivers/acpi/pci_root.c >>>>>> @@ -393,7 +393,7 @@ static u32 calculate_support(void) >>>>>> support |= OSC_PCI_HPX_TYPE_3_SUPPORT; >>>>>> if (pci_ext_cfg_avail()) >>>>>> support |= OSC_PCI_EXT_CONFIG_SUPPORT; >>>>>> - if (pcie_aspm_support_enabled()) >>>>>> + if (IS_ENABLED(CONFIG_PCIEASPM)) >>>>> >>>>> Is there any way firmware could tell the difference between >>>>> "CONFIG_PCIEASPM not set" and "CONFIG_PCIEASPM=y and booted with >>>>> 'pcie_aspm=off'"? >>>>> >>>>> If not, why would we even check whether CONFIG_PCIEASPM is set? >>>> >>>> If we announce ASPM support when CONFIG_PCIEASPM=n it'll work as well >>>> but negotiation and the log don't match the fact. We'll get misleading >>>> messages that ASPM is supported by OS by it cannot be enable as there's >>>> no driver. >>>> >>>> As mentioned by the PCIe Firmware Spec r3.3, >>>> "ASPM Optionality supported >>>> The operating system sets this bit to 1 if it properly recognizes >>>> and manages ASPM support on PCI Express components which report >>>> support for ASPM L1 only in the ASPM Support field within the Link >>>> Capabilities Register. Otherwise, the operating system sets this >>>> bit to 0" >>> >>> Yes. I don't completely understand this bit, but I think it's related >>> to the fact that L0s support was originally required for all links, so >>> the only defined ASPM Support encodings were these: >>> >>> 01b - L0s supported >>> 11b - L0s and L1 supported >>> >>> The "ASPM Optionality" ECN [1] of June 19, 2009, added these new >>> encodings: >>> >>> 00b - No ASPM support >>> 10b - L1 supported >>> >>> So I think the _OSC "ASPM Optionality Supported" bit tells the >>> firmware that the OS supports this new possibility of devices that >>> support L1 but not L0s. >>> >>> Linux currently never sets the "ASPM Optionality Supported" bit, but >>> it probably should, because I think we *do* support L1 even if L0s >>> isn't supported. >> >> Yes, it sounds sensible to me. Actually I intended to refer BIT[1] which we're >> currently using for advertising ASPM support in _OSC, but I copied the wrong >> field...apologize. >> >> "Active State Power Management supported >> The operating system sets this bit to 1 if it natively supports configuration >> of Active State Power Management registers in PCI Express devices. Otherwise, >> the operating system sets this bit to 0." >> >> IIUC, CONFIG_PCIEASPM=y means the OS *natively* support ASPM configuration so >> we should set this bit to 1 even if we boot with pcie_aspm=off; otherwise the >> OS has no native support of ASPM the bit should be 0. Currently the _OSC >> negotiation seems to violent the spec a bit when booting with pcie_aspm=off >> on a OS with CONFIG_PCIASPM=y. > > We have three cases: > > 1) CONFIG_PCIEASPM=y > > Linux allocates ASPM link_state for downstream ports and manages > ASPM. > > 2) CONFIG_PCIEASPM=y and booted with "pcie_aspm=off" > > aspm_support_enabled is false, so Linux does not allocate ASPM > link_state and does not manage ASPM. There is no way to change > aspm_support_enabled at runtime. pcie_aspm_get_link() always > returns NULL, so ASPM cannot be enabled by drivers or by the > sysfs knobs (aspm_ctrl_attrs[]). > > 3) CONFIG_PCIEASPM is unset > > aspm.c is not even compiled, so ASPM cannot be enabled by drivers > or sysfs. > > Currently we set OSC_PCI_ASPM_SUPPORT only for case 1. This patch > would set it for both case 1 and case 2. > > But I think case 2 and case 3 are indistinguishable from the > platform's point of view. The only difference is that case 2 includes > some ASPM code in the image that can never be used. > In the currently implementation there's no difference since in case 2 and 3 OS will declare no ASPM support. But with this patch, case 2 will have some differences. [without this patch] - os won't declare the support of ASPM in the dmesg - os won't have ASPM control as well as other services [with this patch] - os will declare the support of ASPM in the dmesg - os may get the ASPM control but won't actually enable it > I think part of the motivation for this patch is that we'd like AER, > hotplug, etc to work even in case 2. Yes it's the initial purpose of this patch. The control of pcie_aspm=off implicitly influence other services which have no explicit dependence on ASPM. > We could make an argument for > doing that, but then AER and hotplug should work even in case 3. > > If we want to do that, I think we should do it head-on by relaxing > this test in os_control_query_checks(): > > if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) { > decode_osc_support(root, "not requesting OS control; OS requires", > ACPI_PCIE_REQ_SUPPORT); > return false; > } > Are we back to the initial approach [1] or something like that? If so, we're going to declare no ASPM support and then firmware will have a chance to have it. We'll have native hotplug but ASPM maybe controlled by the firmware. This may violate the spec, per the PCI Firmware spec, r3.3, sec 4.5.3 as we discussed previously [2]: // Only allow native hot plug control if the OS supports: // * ASPM // * Clock PM // * MSI/MSI-X But with the approach in this patch we won't have this violation. [1] https://lore.kernel.org/linux-pci/20220407131602.14727-1-yangyicong@hisilicon.com/ [2] https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/ >>>> When CONFIG_PCIEASPM=n we have no aspm driver and apparently cannot >>>> support any ASPM features so we should set the bit to 0 to match the spec. >>> >>> I think you're saying that firmware could not tell the difference, but >>> the Linux log messages might be slightly misleading. I assume you >>> mean this message: >>> >>> acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] >>> >>> where we would claim that we support ASPM even when CONFIG_PCIEASPM is >>> unset. >>> >> >> yes. That's what I mean misleading. >> >>> The purpose of that message is to expose what Linux is telling the >>> platform via _OSC. If we're telling the platform we support ASPM, I >>> think the message should reflect that. >>> >> >> agree. >> >>> But I'm actually not sure there's real value in advertising ASPM >>> support to the platform when CONFIG_PCIEASPM=y but we're booted with >>> "pcie_aspm=off". It sounds like this was found by using that option >>> (even though it wasn't *needed*) and finding that Linux didn't request >>> control of other PCIe services. I don't know if that's worth >>> changing. >>> >> >> It's found in one of our test scenes that the AER is not worked. The issue >> is implicit as AER is influenced by the ASPM which it shouldn't be. And >> the implementation of pcie_aspm=off seems don't follow the spec. This patch >> intends to make the code follow the spec in this corner case and by the way >> fixes the issue I met. In the general cases there intends no change. >> >> For the usage of pcie_aspm=off there may be cases of turning off ASPM when >> the firmware grant the control to the OS. On some platform user may disable >> ASPM through firmware by ACPI FADT, but on other platform OS may always get >> the control of ASPM so this provide a way of disabling it. But I think it's >> not proper to assume user doesn't want other services like AER either. >> >> Since we haven't met any realistic issue on this boot option, I'd really >> appreciate your suggestions on this. >> >> Regards, >> Yicong > . >
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 6f9e75d14808..17e78582e633 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -393,7 +393,7 @@ static u32 calculate_support(void) support |= OSC_PCI_HPX_TYPE_3_SUPPORT; if (pci_ext_cfg_avail()) support |= OSC_PCI_EXT_CONFIG_SUPPORT; - if (pcie_aspm_support_enabled()) + if (IS_ENABLED(CONFIG_PCIEASPM)) support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT; if (pci_msi_enabled()) support |= OSC_PCI_MSI_SUPPORT;
When we have CONFIG_PCIEASPM enabled it means OS can always support ASPM no matter user have disabled it through pcie_aspm=off or not. But currently we won't advertise ASPM support in _OSC negotiation if user disables it, which doesn't match the fact. This will also have side effects that other PCIe services like AER and hotplug will be disabled as ASPM support is required and we won't negotiate other services if ASPM support is absent. So this patch makes OS always advertising ASPM support if CONFIG_PCIEASPM=y. It intends no functional change to pcie_aspm=off as it will still mark aspm_disabled=1 and aspm_support_enabled=false, driver will check these status before configuring ASPM. Tested this patch with pcie_aspm=off: estuary:/$ dmesg | egrep -i "aspm|osc" [ 0.000000] PCIe ASPM is disabled [ 8.706961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 8.726032] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 8.742818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability DPC] estuary:/sys/module/pcie_aspm/parameters$ cat policy [default] performance powersave powersupersave estuary:/sys/module/pcie_aspm/parameters$ echo powersave > policy bash: echo: write error: Operation not permitted Cc: Rafael J. Wysocki <rafael@kernel.org> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> [https://lore.kernel.org/linux-pci/20220407154257.GA235990@bhelgaas/] Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> --- drivers/acpi/pci_root.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)