Message ID | 20220519110837.245488-9-pro@denx.de |
---|---|
State | Superseded |
Delegated to: | Stefano Babic |
Headers | show |
Series | ARM: imx: Add support for iMX6QDL DHCOM DRC02 and DH picoITX | expand |
On 19/05/2022 08:08, Philip Oberfichtner wrote: return 0; > - } > + /* Determine carrier board at compile time and SoM at runtime */ > + const size_t size = 32; > + char *car, *som, dt[size]; > + > + car = strchr(CONFIG_DEFAULT_DEVICE_TREE, '-'); /* i.e. -dhcom-drc02 > */ > + > + som = is_mx6dq() ? "imx6q" : > + is_mx6dl() ? "imx6dl" : > + is_mx6solo() ? "imx6s" : NULL; > + > + if (!(car && som)) > + return -1; Nit: can you return -EINVAL instead of -1?
On 5/19/22 13:08, Philip Oberfichtner wrote: > Before this commit device tree selection could rely solely on > differentiating the iMX6 processor variant Q and DL. After adding two new > carrier boards, the DRC02 and the picoITX, the interchangeability of SoMs > makes this approach infeasible. > > It is now required to specify the carrier board (dhcom-drc02, > dhcom-picoitx or dhcom-pdk2) at compile time using > CONFIG_DEFAULT_DEVICETREE. The SoM is determined at runtime as before. > > Signed-off-by: Philip Oberfichtner <pro@denx.de> > --- > > board/dhelectronics/dh_imx6/dh_imx6.c | 22 ++++++++++++++-------- > 1 file changed, 14 insertions(+), 8 deletions(-) > > diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c > index 6059f96e80..c63fc1dd8a 100644 > --- a/board/dhelectronics/dh_imx6/dh_imx6.c > +++ b/board/dhelectronics/dh_imx6/dh_imx6.c > @@ -227,14 +227,20 @@ int checkboard(void) > #ifdef CONFIG_MULTI_DTB_FIT > int board_fit_config_name_match(const char *name) > { > - if (is_mx6dq()) { > - if (!strcmp(name, "imx6q-dhcom-pdk2")) > - return 0; > - } else if (is_mx6sdl()) { Careful here ^ is_mx6sdl() matches on Solo and DualLite. > - if (!strcmp(name, "imx6dl-dhcom-pdk2")) > - return 0; > - } > + /* Determine carrier board at compile time and SoM at runtime */ > + const size_t size = 32; > + char *car, *som, dt[size]; > + > + car = strchr(CONFIG_DEFAULT_DEVICE_TREE, '-'); /* i.e. -dhcom-drc02 */ > + > + som = is_mx6dq() ? "imx6q" : > + is_mx6dl() ? "imx6dl" : > + is_mx6solo() ? "imx6s" : NULL; > + > + if (!(car && som)) > + return -1; > > - return -1; > + snprintf(dt, size, "%s%s", som, car); > + return strcmp(name, dt); This will break imx6s-dhcom-pdk2 , which used the imx6dl-dhcom-pdk2 DT which was fine, because U-Boot is single core anyway. Try something like this: /* Test SoC prefix */ if (is_mx6dq()) { if (strncmp(name, "imx6q-")) return -1; } else if (is_mx6sdl()) { if (strncmp(name, "imx6s-") && strncmp(name, "imx6dl-")) return -1; } /* Test board suffix */ a = strchr(CONFIG_DEFAULT_DEVICE_TREE, '-'); /* i.e. -dhcom-drc02 */ b = strchr(name, '-'); /* i.e. -dhcom-drc02 */ return strcmp(a, b) ? -1 : 0; I _think_ that should work and cover all combinations. (and of course, pick better variable names than a,b)
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index 6059f96e80..c63fc1dd8a 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -227,14 +227,20 @@ int checkboard(void) #ifdef CONFIG_MULTI_DTB_FIT int board_fit_config_name_match(const char *name) { - if (is_mx6dq()) { - if (!strcmp(name, "imx6q-dhcom-pdk2")) - return 0; - } else if (is_mx6sdl()) { - if (!strcmp(name, "imx6dl-dhcom-pdk2")) - return 0; - } + /* Determine carrier board at compile time and SoM at runtime */ + const size_t size = 32; + char *car, *som, dt[size]; + + car = strchr(CONFIG_DEFAULT_DEVICE_TREE, '-'); /* i.e. -dhcom-drc02 */ + + som = is_mx6dq() ? "imx6q" : + is_mx6dl() ? "imx6dl" : + is_mx6solo() ? "imx6s" : NULL; + + if (!(car && som)) + return -1; - return -1; + snprintf(dt, size, "%s%s", som, car); + return strcmp(name, dt); } #endif
Before this commit device tree selection could rely solely on differentiating the iMX6 processor variant Q and DL. After adding two new carrier boards, the DRC02 and the picoITX, the interchangeability of SoMs makes this approach infeasible. It is now required to specify the carrier board (dhcom-drc02, dhcom-picoitx or dhcom-pdk2) at compile time using CONFIG_DEFAULT_DEVICETREE. The SoM is determined at runtime as before. Signed-off-by: Philip Oberfichtner <pro@denx.de> --- board/dhelectronics/dh_imx6/dh_imx6.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)