mbox series

[v3,0/6] SM8350 Display/GPU clock enablement

Message ID 20220504122725.179262-1-robert.foss@linaro.org
Headers show
Series SM8350 Display/GPU clock enablement | expand

Message

Robert Foss May 4, 2022, 12:27 p.m. UTC
This series depends on a patch[1] for parked RCGs, which is being reviewed seperately from this series.

Additionally this series is pending a decision about .fw_name .index  for new drivers, so please don't merge this yet.

[1] https://lore.kernel.org/linux-arm-msm/20220426212136.1543984-1-bjorn.andersson@linaro.org/


Changes since v2
 - Dropped "clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED"
 - Dropped "clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable"
 - Dropped "clk: qcom: rcg2: Cache rate changes for parked RCGs"


Jonathan Marek (3):
  clk: qcom: add support for SM8350 GPUCC
  clk: qcom: add support for SM8350 DISPCC
  dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

Robert Foss (3):
  arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
  dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
  arm64: dts: qcom: sm8350: Add DISPCC node

 .../bindings/clock/qcom,dispcc-sm8x50.yaml    |   6 +-
 .../devicetree/bindings/clock/qcom,gpucc.yaml |   2 +
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  42 +-
 drivers/clk/qcom/Kconfig                      |  12 +-
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/dispcc-sm8250.c              |  60 +-
 drivers/clk/qcom/gpucc-sm8350.c               | 637 ++++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm8350.h    |   1 +
 include/dt-bindings/clock/qcom,gpucc-sm8350.h |  52 ++
 9 files changed, 800 insertions(+), 13 deletions(-)
 create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

Comments

Dmitry Baryshkov May 4, 2022, 1:34 p.m. UTC | #1
On Wed, 4 May 2022 at 15:27, Robert Foss <robert.foss@linaro.org> wrote:
>
> From: Jonathan Marek <jonathan@marek.ca>
>
> The GPUCC manages the clocks for the Adreno GPU found on the
> sm8350 SoCs.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>

These should come in opposite order.
First comes Jonathan's signature. Then you sign under his signature.

> ---
>
> Changes since v1
>  - Remove .name assignments for clk_parent_data - Dmitry
>  - Use ARRAY_SIZE where possible - Dmitry
>  - Remove commented out code - Dmitry
>  - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
>  - Assign .parent_hws instead of .hw - Dmitry
>
> Changes since v2
>  - Switch license to dual BSD/GPL - Bjorn
>  - Add Jonathans SoB - Jonathan
>  - Add Linaro to copyright statement - Bjorn
>  - Make .hw.init assignment const - Bjorn
>  - Extract & deduplicate bi_tcxo parent_data - Bjorn
>  - Removed further .name assignment - Bjorn
>  - Move of_device_id declaration - Bjorn
>
>
>  drivers/clk/qcom/Kconfig        |   8 +
>  drivers/clk/qcom/Makefile       |   1 +
>  drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
>  3 files changed, 646 insertions(+)
>  create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index e27f37ac2d9c..9b1f54e634b9 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -703,6 +703,14 @@ config SM_GPUCC_8250
>           Say Y if you want to support graphics controller devices and
>           functionality such as 3D graphics.
>
> +config SM_GPUCC_8350
> +       tristate "SM8350 Graphics Clock Controller"
> +       select SM_GCC_8350
> +       help
> +         Support for the graphics clock controller on SM8350 devices.
> +         Say Y if you want to support graphics controller devices and
> +         functionality such as 3D graphics.
> +
>  config SM_VIDEOCC_8150
>         tristate "SM8150 Video Clock Controller"
>         select SM_GCC_8150
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index dff6aeb980e6..e1b7e49c8da4 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -100,6 +100,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
>  obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
>  obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
>  obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> +obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
>  obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
>  obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
>  obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
> new file mode 100644
> index 000000000000..68d85757e064
> --- /dev/null
> +++ b/drivers/clk/qcom/gpucc-sm8350.c
> @@ -0,0 +1,637 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "common.h"
> +#include "clk-regmap-mux.h"
> +#include "clk-regmap-divider.h"
> +#include "gdsc.h"
> +#include "reset.h"
> +
> +enum {
> +       P_BI_TCXO,
> +       P_GPLL0_OUT_MAIN,
> +       P_GPLL0_OUT_MAIN_DIV,
> +       P_GPU_CC_PLL0_OUT_MAIN,
> +       P_GPU_CC_PLL1_OUT_MAIN,
> +};
> +
> +static struct pll_vco lucid_5lpe_vco[] = {
> +       { 249600000, 1750000000, 0 },
> +};
> +
> +static const struct alpha_pll_config gpu_cc_pll0_config = {
> +       .l = 0x18,
> +       .alpha = 0x6000,
> +       .config_ctl_val = 0x20485699,
> +       .config_ctl_hi_val = 0x00002261,
> +       .config_ctl_hi1_val = 0x2A9A699C,
> +       .test_ctl_val = 0x00000000,
> +       .test_ctl_hi_val = 0x00000000,
> +       .test_ctl_hi1_val = 0x01800000,
> +       .user_ctl_val = 0x00000000,
> +       .user_ctl_hi_val = 0x00000805,
> +       .user_ctl_hi1_val = 0x00000000,
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent = {
> +       .fw_name = "bi_tcxo",
> +};
> +
> +static struct clk_alpha_pll gpu_cc_pll0 = {
> +       .offset = 0x0,
> +       .vco_table = lucid_5lpe_vco,
> +       .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> +       .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> +       .clkr = {
> +               .hw.init = &(const struct clk_init_data){
> +                       .name = "gpu_cc_pll0",
> +                       .parent_data = &gpu_cc_parent,
> +                       .num_parents = 1,

If you move the parent data away, please use ARRAY_SIZE here (and below).

> +                       .ops = &clk_alpha_pll_lucid_5lpe_ops,
> +               },
> +       },
> +};
> +
> +static const struct alpha_pll_config gpu_cc_pll1_config = {
> +       .l = 0x1A,
> +       .alpha = 0xAAA,
> +       .config_ctl_val = 0x20485699,
> +       .config_ctl_hi_val = 0x00002261,
> +       .config_ctl_hi1_val = 0x2A9A699C,
> +       .test_ctl_val = 0x00000000,
> +       .test_ctl_hi_val = 0x00000000,
> +       .test_ctl_hi1_val = 0x01800000,
> +       .user_ctl_val = 0x00000000,
> +       .user_ctl_hi_val = 0x00000805,
> +       .user_ctl_hi1_val = 0x00000000,
> +};
> +
> +static struct clk_alpha_pll gpu_cc_pll1 = {
> +       .offset = 0x100,
> +       .vco_table = lucid_5lpe_vco,
> +       .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> +       .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> +       .clkr = {
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_pll1",
> +                       .parent_data = &gpu_cc_parent,
> +                       .num_parents = 1,
> +                       .ops = &clk_alpha_pll_lucid_5lpe_ops,
> +               },
> +       },
> +};
> +
> +static const struct parent_map gpu_cc_parent_map_0[] = {
> +       { P_BI_TCXO, 0 },
> +       { P_GPU_CC_PLL0_OUT_MAIN, 1 },
> +       { P_GPU_CC_PLL1_OUT_MAIN, 3 },
> +       { P_GPLL0_OUT_MAIN, 5 },
> +       { P_GPLL0_OUT_MAIN_DIV, 6 },
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent_data_0[] = {
> +       gpu_cc_parent,
> +       { .hw = &gpu_cc_pll0.clkr.hw },
> +       { .hw = &gpu_cc_pll1.clkr.hw },
> +       { .fw_name = "gcc_gpu_gpll0_clk_src" },
> +       { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> +};
> +
> +static const struct parent_map gpu_cc_parent_map_1[] = {
> +       { P_BI_TCXO, 0 },
> +       { P_GPU_CC_PLL1_OUT_MAIN, 3 },
> +       { P_GPLL0_OUT_MAIN, 5 },
> +       { P_GPLL0_OUT_MAIN_DIV, 6 },
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent_data_1[] = {
> +       gpu_cc_parent,
> +       { .hw = &gpu_cc_pll1.clkr.hw },
> +       { .fw_name = "gcc_gpu_gpll0_clk_src" },
> +       { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> +};
> +
> +static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
> +       F(19200000, P_BI_TCXO, 1, 0, 0),
> +       F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
> +       F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
> +       { }
> +};
> +
> +static struct clk_rcg2 gpu_cc_gmu_clk_src = {
> +       .cmd_rcgr = 0x1120,
> +       .mnd_width = 0,
> +       .hid_width = 5,
> +       .parent_map = gpu_cc_parent_map_0,
> +       .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
> +       .clkr.hw.init = &(struct clk_init_data){
> +               .name = "gpu_cc_gmu_clk_src",
> +               .parent_data = gpu_cc_parent_data_0,
> +               .num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
> +               .flags = CLK_SET_RATE_PARENT,
> +               .ops = &clk_rcg2_ops,
> +       },
> +};
> +
> +static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
> +       F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
> +       F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
> +       F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
> +       { }
> +};
> +
> +static struct clk_rcg2 gpu_cc_hub_clk_src = {
> +       .cmd_rcgr = 0x117c,
> +       .mnd_width = 0,
> +       .hid_width = 5,
> +       .parent_map = gpu_cc_parent_map_1,
> +       .freq_tbl = ftbl_gpu_cc_hub_clk_src,
> +       .clkr.hw.init = &(struct clk_init_data){
> +               .name = "gpu_cc_hub_clk_src",
> +               .parent_data = gpu_cc_parent_data_1,
> +               .num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
> +               .flags = CLK_SET_RATE_PARENT,
> +               .ops = &clk_rcg2_ops,
> +       },
> +};
> +
> +static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
> +       .reg = 0x11c0,
> +       .shift = 0,
> +       .width = 4,
> +       .clkr.hw.init = &(struct clk_init_data) {
> +               .name = "gpu_cc_hub_ahb_div_clk_src",
> +               .parent_hws = (const struct clk_hw*[]){
> +                       &gpu_cc_hub_clk_src.clkr.hw,
> +               },
> +               .num_parents = 1,
> +               .flags = CLK_SET_RATE_PARENT,
> +               .ops = &clk_regmap_div_ro_ops,
> +       },
> +};
> +
> +static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
> +       .reg = 0x11bc,
> +       .shift = 0,
> +       .width = 4,
> +       .clkr.hw.init = &(struct clk_init_data) {
> +               .name = "gpu_cc_hub_cx_int_div_clk_src",
> +               .parent_hws = (const struct clk_hw*[]){
> +                       &gpu_cc_hub_clk_src.clkr.hw,
> +               },
> +               .num_parents = 1,
> +               .flags = CLK_SET_RATE_PARENT,
> +               .ops = &clk_regmap_div_ro_ops,
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_ahb_clk = {
> +       .halt_reg = 0x1078,
> +       .halt_check = BRANCH_HALT_DELAY,
> +       .clkr = {
> +               .enable_reg = 0x1078,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_ahb_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cb_clk = {
> +       .halt_reg = 0x1170,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x1170,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cb_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_crc_ahb_clk = {
> +       .halt_reg = 0x107c,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x107c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_crc_ahb_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_apb_clk = {
> +       .halt_reg = 0x1088,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1088,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_apb_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_gmu_clk = {
> +       .halt_reg = 0x1098,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x1098,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_gmu_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_gmu_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_aon_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_at_clk = {
> +       .halt_reg = 0x1080,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1080,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_qdss_at_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
> +       .halt_reg = 0x1094,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1094,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_qdss_trig_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
> +       .halt_reg = 0x1084,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1084,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_qdss_tsctr_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
> +       .halt_reg = 0x108c,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x108c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cx_snoc_dvm_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cxo_aon_clk = {
> +       .halt_reg = 0x1004,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1004,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cxo_aon_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_cxo_clk = {
> +       .halt_reg = 0x109c,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x109c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_cxo_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_freq_measure_clk = {
> +       .halt_reg = 0x120c,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x120c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_freq_measure_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_gx_gmu_clk = {
> +       .halt_reg = 0x1064,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x1064,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_gx_gmu_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_gmu_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
> +       .halt_reg = 0x105c,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x105c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_gx_qdss_tsctr_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_gx_vsense_clk = {
> +       .halt_reg = 0x1058,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1058,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_gx_vsense_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
> +       .halt_reg = 0x5000,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x5000,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_hub_aon_clk = {
> +       .halt_reg = 0x1178,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x1178,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_hub_aon_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_hub_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_aon_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_hub_cx_int_clk = {
> +       .halt_reg = 0x1204,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x1204,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_hub_cx_int_clk",
> +                       .parent_hws = (const struct clk_hw*[]){
> +                               &gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
> +                       },
> +                       .num_parents = 1,
> +                       .flags = CLK_SET_RATE_PARENT,
> +                       .ops = &clk_branch2_aon_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
> +       .halt_reg = 0x802c,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x802c,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_mnd1x_0_gfx3d_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
> +       .halt_reg = 0x8030,
> +       .halt_check = BRANCH_HALT,
> +       .clkr = {
> +               .enable_reg = 0x8030,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_mnd1x_1_gfx3d_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch gpu_cc_sleep_clk = {
> +       .halt_reg = 0x1090,
> +       .halt_check = BRANCH_HALT_VOTED,
> +       .clkr = {
> +               .enable_reg = 0x1090,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "gpu_cc_sleep_clk",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct gdsc gpu_cx_gdsc = {
> +       .gdscr = 0x106c,
> +       .gds_hw_ctrl = 0x1540,
> +       .pd = {
> +               .name = "gpu_cx_gdsc",
> +       },
> +       .pwrsts = PWRSTS_OFF_ON,
> +       .flags = VOTABLE,
> +};
> +
> +static struct gdsc gpu_gx_gdsc = {
> +       .gdscr = 0x100c,
> +       .clamp_io_ctrl = 0x1508,
> +       .pd = {
> +               .name = "gpu_gx_gdsc",
> +               .power_on = gdsc_gx_do_nothing_enable,
> +       },
> +       .pwrsts = PWRSTS_OFF_ON,
> +       .flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
> +};
> +
> +static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
> +       [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
> +       [GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
> +       [GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
> +       [GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
> +       [GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
> +       [GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
> +       [GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
> +       [GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
> +       [GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
> +       [GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
> +       [GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
> +       [GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
> +       [GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
> +       [GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
> +       [GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
> +       [GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
> +       [GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
> +       [GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
> +       [GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
> +       [GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
> +       [GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
> +       [GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
> +       [GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
> +       [GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
> +       [GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
> +       [GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
> +       [GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
> +};
> +
> +static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
> +       [GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
> +       [GPUCC_GPU_CC_CB_BCR] = { 0x116c },
> +       [GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
> +       [GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
> +       [GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
> +       [GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
> +       [GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
> +       [GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
> +};
> +
> +static struct gdsc *gpu_cc_sm8350_gdscs[] = {
> +       [GPU_CX_GDSC] = &gpu_cx_gdsc,
> +       [GPU_GX_GDSC] = &gpu_gx_gdsc,
> +};
> +
> +static const struct regmap_config gpu_cc_sm8350_regmap_config = {
> +       .reg_bits = 32,
> +       .reg_stride = 4,
> +       .val_bits = 32,
> +       .max_register = 0x8030,
> +       .fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
> +       .config = &gpu_cc_sm8350_regmap_config,
> +       .clks = gpu_cc_sm8350_clocks,
> +       .num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
> +       .resets = gpu_cc_sm8350_resets,
> +       .num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
> +       .gdscs = gpu_cc_sm8350_gdscs,
> +       .num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
> +};
> +
> +static int gpu_cc_sm8350_probe(struct platform_device *pdev)
> +{
> +       struct regmap *regmap;
> +
> +       regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
> +       if (IS_ERR(regmap)) {
> +               dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
> +               return PTR_ERR(regmap);
> +       }
> +
> +       clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
> +       clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
> +
> +       return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
> +}
> +
> +static const struct of_device_id gpu_cc_sm8350_match_table[] = {
> +       { .compatible = "qcom,sm8350-gpucc" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
> +
> +static struct platform_driver gpu_cc_sm8350_driver = {
> +       .probe = gpu_cc_sm8350_probe,
> +       .driver = {
> +               .name = "sm8350-gpucc",
> +               .of_match_table = gpu_cc_sm8350_match_table,
> +       },
> +};
> +
> +static int __init gpu_cc_sm8350_init(void)
> +{
> +       return platform_driver_register(&gpu_cc_sm8350_driver);
> +}
> +subsys_initcall(gpu_cc_sm8350_init);
> +
> +static void __exit gpu_cc_sm8350_exit(void)
> +{
> +       platform_driver_unregister(&gpu_cc_sm8350_driver);
> +}
> +module_exit(gpu_cc_sm8350_exit);
> +
> +MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.34.1
>
Konrad Dybcio May 4, 2022, 4:23 p.m. UTC | #2
On 04/05/2022 14:27, Robert Foss wrote:
> From: Jonathan Marek <jonathan@marek.ca>
>
> Add support to the SM8350 display clock controller by extending the SM8250
> display clock controller, which is almost identical but has some minor
> differences.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>
> Changes since v1
>   - Remove comment - Dmitry
>
> Changes since v2
>   - Add my SoB - Bjorn
>   - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag
>
>
>   drivers/clk/qcom/Kconfig         |  4 +--
>   drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
>   2 files changed, 61 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 9b1f54e634b9..1752ca0ee405 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -609,11 +609,11 @@ config SM_DISPCC_6125
>   	  splash screen
>   
>   config SM_DISPCC_8250
> -	tristate "SM8150 and SM8250 Display Clock Controller"
> +	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
>   	depends on SM_GCC_8150 || SM_GCC_8250

|| SM_GCC_8350?

sidenote: also || SC_GCC_8180X in a separate patch?

>   	help
>   	  Support for the display clock controller on Qualcomm Technologies, Inc
> -	  SM8150 and SM8250 devices.
> +	  SM8150/SM8250/SM8350 devices.
>   	  Say Y if you want to support display devices and functionality such as
>   	  splash screen.
>   
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index db9379634fb2..8e6cb990e387 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
>   	{ 249600000, 2000000000, 0 },
>   };
>   
> +static struct pll_vco lucid_5lpe_vco[] = {
> +	{ 249600000, 1750000000, 0 },
> +};
> +
>   static struct alpha_pll_config disp_cc_pll0_config = {
>   	.l = 0x47,
>   	.alpha = 0xE000,
> @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
>   	{ .compatible = "qcom,sc8180x-dispcc" },
>   	{ .compatible = "qcom,sm8150-dispcc" },
>   	{ .compatible = "qcom,sm8250-dispcc" },
> +	{ .compatible = "qcom,sm8350-dispcc" },
>   	{ }
>   };
>   MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>   		return PTR_ERR(regmap);
>   	}
>   
> -	/* note: trion == lucid, except for the prepare() op */
> +	/* Apply differences for SM8150 and SM8350 */
>   	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
>   	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
>   	    of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>   		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
>   		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
>   		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> +	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> +		static struct clk_rcg2 * const rcgs[] = {
> +			&disp_cc_mdss_byte0_clk_src,
> +			&disp_cc_mdss_byte1_clk_src,
> +			&disp_cc_mdss_dp_aux1_clk_src,
> +			&disp_cc_mdss_dp_aux_clk_src,
> +			&disp_cc_mdss_dp_link1_clk_src,
> +			&disp_cc_mdss_dp_link_clk_src,
> +			&disp_cc_mdss_dp_pixel1_clk_src,
> +			&disp_cc_mdss_dp_pixel2_clk_src,
> +			&disp_cc_mdss_dp_pixel_clk_src,
> +			&disp_cc_mdss_esc0_clk_src,
> +			&disp_cc_mdss_mdp_clk_src,
> +			&disp_cc_mdss_pclk0_clk_src,
> +			&disp_cc_mdss_pclk1_clk_src,
> +			&disp_cc_mdss_rot_clk_src,
> +			&disp_cc_mdss_vsync_clk_src,
> +		};
> +		static struct clk_regmap_div * const divs[] = {
> +			&disp_cc_mdss_byte0_div_clk_src,
> +			&disp_cc_mdss_byte1_div_clk_src,
> +			&disp_cc_mdss_dp_link1_div_clk_src,
> +			&disp_cc_mdss_dp_link_div_clk_src,
> +		};
> +		unsigned int i;
> +		static bool offset_applied;
> +
> +		/* only apply the offsets once (in case of deferred probe) */
> +		if (!offset_applied) {
> +			for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> +				rcgs[i]->cmd_rcgr -= 4;
> +
> +			for (i = 0; i < ARRAY_SIZE(divs); i++) {
> +				divs[i]->reg -= 4;
> +				divs[i]->width = 4;
> +			}
> +
> +			disp_cc_mdss_ahb_clk.halt_reg -= 4;
> +			disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> +
> +			offset_applied = true;
> +		}
> +
> +		disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> +
> +		disp_cc_pll0_config.config_ctl_hi1_val = 0x2A9A699C;

Lowercase hex, also below.


> +		disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> +		disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +		disp_cc_pll0.vco_table = lucid_5lpe_vco;
> +		disp_cc_pll1_config.config_ctl_hi1_val = 0x2A9A699C;
> +		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> +		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +		disp_cc_pll1.vco_table = lucid_5lpe_vco;
>   	}
>   
>   	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
Konrad
>
Robert Foss May 12, 2022, 1:21 p.m. UTC | #3
On Wed, 4 May 2022 at 18:23, Konrad Dybcio <konrad.dybcio@somainline.org> wrote:
>
>
> On 04/05/2022 14:27, Robert Foss wrote:
> > From: Jonathan Marek <jonathan@marek.ca>
> >
> > Add support to the SM8350 display clock controller by extending the SM8250
> > display clock controller, which is almost identical but has some minor
> > differences.
> >
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >
> > Changes since v1
> >   - Remove comment - Dmitry
> >
> > Changes since v2
> >   - Add my SoB - Bjorn
> >   - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag
> >
> >
> >   drivers/clk/qcom/Kconfig         |  4 +--
> >   drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
> >   2 files changed, 61 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index 9b1f54e634b9..1752ca0ee405 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -609,11 +609,11 @@ config SM_DISPCC_6125
> >         splash screen
> >
> >   config SM_DISPCC_8250
> > -     tristate "SM8150 and SM8250 Display Clock Controller"
> > +     tristate "SM8150/SM8250/SM8350 Display Clock Controller"
> >       depends on SM_GCC_8150 || SM_GCC_8250
>
> || SM_GCC_8350?

Will fix in v4.

>
> sidenote: also || SC_GCC_8180X in a separate patch?

I haven't been involved in the 8180X work, and am a little bit
hesitant to include any changes related to it in this series.

>
> >       help
> >         Support for the display clock controller on Qualcomm Technologies, Inc
> > -       SM8150 and SM8250 devices.
> > +       SM8150/SM8250/SM8350 devices.
> >         Say Y if you want to support display devices and functionality such as
> >         splash screen.
> >
> > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> > index db9379634fb2..8e6cb990e387 100644
> > --- a/drivers/clk/qcom/dispcc-sm8250.c
> > +++ b/drivers/clk/qcom/dispcc-sm8250.c
> > @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
> >       { 249600000, 2000000000, 0 },
> >   };
> >
> > +static struct pll_vco lucid_5lpe_vco[] = {
> > +     { 249600000, 1750000000, 0 },
> > +};
> > +
> >   static struct alpha_pll_config disp_cc_pll0_config = {
> >       .l = 0x47,
> >       .alpha = 0xE000,
> > @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
> >       { .compatible = "qcom,sc8180x-dispcc" },
> >       { .compatible = "qcom,sm8150-dispcc" },
> >       { .compatible = "qcom,sm8250-dispcc" },
> > +     { .compatible = "qcom,sm8350-dispcc" },
> >       { }
> >   };
> >   MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> > @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >               return PTR_ERR(regmap);
> >       }
> >
> > -     /* note: trion == lucid, except for the prepare() op */
> > +     /* Apply differences for SM8150 and SM8350 */
> >       BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> >       if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
> >           of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> > @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >               disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> >               disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> >               disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> > +     } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> > +             static struct clk_rcg2 * const rcgs[] = {
> > +                     &disp_cc_mdss_byte0_clk_src,
> > +                     &disp_cc_mdss_byte1_clk_src,
> > +                     &disp_cc_mdss_dp_aux1_clk_src,
> > +                     &disp_cc_mdss_dp_aux_clk_src,
> > +                     &disp_cc_mdss_dp_link1_clk_src,
> > +                     &disp_cc_mdss_dp_link_clk_src,
> > +                     &disp_cc_mdss_dp_pixel1_clk_src,
> > +                     &disp_cc_mdss_dp_pixel2_clk_src,
> > +                     &disp_cc_mdss_dp_pixel_clk_src,
> > +                     &disp_cc_mdss_esc0_clk_src,
> > +                     &disp_cc_mdss_mdp_clk_src,
> > +                     &disp_cc_mdss_pclk0_clk_src,
> > +                     &disp_cc_mdss_pclk1_clk_src,
> > +                     &disp_cc_mdss_rot_clk_src,
> > +                     &disp_cc_mdss_vsync_clk_src,
> > +             };
> > +             static struct clk_regmap_div * const divs[] = {
> > +                     &disp_cc_mdss_byte0_div_clk_src,
> > +                     &disp_cc_mdss_byte1_div_clk_src,
> > +                     &disp_cc_mdss_dp_link1_div_clk_src,
> > +                     &disp_cc_mdss_dp_link_div_clk_src,
> > +             };
> > +             unsigned int i;
> > +             static bool offset_applied;
> > +
> > +             /* only apply the offsets once (in case of deferred probe) */
> > +             if (!offset_applied) {
> > +                     for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> > +                             rcgs[i]->cmd_rcgr -= 4;
> > +
> > +                     for (i = 0; i < ARRAY_SIZE(divs); i++) {
> > +                             divs[i]->reg -= 4;
> > +                             divs[i]->width = 4;
> > +                     }
> > +
> > +                     disp_cc_mdss_ahb_clk.halt_reg -= 4;
> > +                     disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> > +
> > +                     offset_applied = true;
> > +             }
> > +
> > +             disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> > +
> > +             disp_cc_pll0_config.config_ctl_hi1_val = 0x2A9A699C;
>
> Lowercase hex, also below.

Ack.

>
>
> > +             disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> > +             disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > +             disp_cc_pll0.vco_table = lucid_5lpe_vco;
> > +             disp_cc_pll1_config.config_ctl_hi1_val = 0x2A9A699C;
> > +             disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> > +             disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > +             disp_cc_pll1.vco_table = lucid_5lpe_vco;
> >       }
> >
> >       clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
> Konrad
> >