| Message ID | 20220210054947.170134-7-apatel@ventanamicro.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | RISC-V CPU Idle Support | expand |
On Wed, Feb 9, 2022 at 9:51 PM Anup Patel <apatel@ventanamicro.com> wrote: > > From: Anup Patel <anup.patel@wdc.com> > > The RISC-V SBI HSM extension provides HSM suspend call which can > be used by Linux RISC-V to enter platform specific low-power state. > > This patch adds a CPU idle driver based on RISC-V SBI calls which > will populate idle states from device tree and use SBI calls to > entry these idle states. > > Signed-off-by: Anup Patel <anup.patel@wdc.com> > Signed-off-by: Anup Patel <apatel@ventanamicro.com> > --- > MAINTAINERS | 7 + > drivers/cpuidle/Kconfig | 5 + > drivers/cpuidle/Kconfig.riscv | 15 + > drivers/cpuidle/Makefile | 4 + > drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++ > 5 files changed, 658 insertions(+) > create mode 100644 drivers/cpuidle/Kconfig.riscv > create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 39ece23e8d93..2ff0055a26a7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5058,6 +5058,13 @@ S: Supported > F: drivers/cpuidle/dt_idle_genpd.c > F: drivers/cpuidle/dt_idle_genpd.h > > +CPUIDLE DRIVER - RISC-V SBI > +M: Anup Patel <anup@brainfault.org> > +L: linux-pm@vger.kernel.org > +L: linux-riscv@lists.infradead.org > +S: Maintained > +F: drivers/cpuidle/cpuidle-riscv-sbi.c > + > CRAMFS FILESYSTEM > M: Nicolas Pitre <nico@fluxnic.net> > S: Maintained > diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig > index f1afe7ab6b54..ff71dd662880 100644 > --- a/drivers/cpuidle/Kconfig > +++ b/drivers/cpuidle/Kconfig > @@ -66,6 +66,11 @@ depends on PPC > source "drivers/cpuidle/Kconfig.powerpc" > endmenu > > +menu "RISC-V CPU Idle Drivers" > +depends on RISCV > +source "drivers/cpuidle/Kconfig.riscv" > +endmenu > + > config HALTPOLL_CPUIDLE > tristate "Halt poll cpuidle driver" > depends on X86 && KVM_GUEST > diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv > new file mode 100644 > index 000000000000..78518c26af74 > --- /dev/null > +++ b/drivers/cpuidle/Kconfig.riscv > @@ -0,0 +1,15 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# RISC-V CPU Idle drivers > +# > + > +config RISCV_SBI_CPUIDLE > + bool "RISC-V SBI CPU idle Driver" > + depends on RISCV_SBI > + select DT_IDLE_STATES > + select CPU_IDLE_MULTIPLE_DRIVERS > + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF > + help > + Select this option to enable RISC-V SBI firmware based CPU idle > + driver for RISC-V systems. This drivers also supports hierarchical > + DT based layout of the idle state. > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile > index 11a26cef279f..d103342b7cfc 100644 > --- a/drivers/cpuidle/Makefile > +++ b/drivers/cpuidle/Makefile > @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o > # POWERPC drivers > obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o > obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o > + > +############################################################################### > +# RISC-V drivers > +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o > diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c > new file mode 100644 > index 000000000000..b459eda2cd37 > --- /dev/null > +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c > @@ -0,0 +1,627 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * RISC-V SBI CPU idle driver. > + * > + * Copyright (c) 2021 Western Digital Corporation or its affiliates. > + * Copyright (c) 2022 Ventana Micro Systems Inc. > + */ > + > +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt > + > +#include <linux/cpuidle.h> > +#include <linux/cpumask.h> > +#include <linux/cpu_pm.h> > +#include <linux/cpu_cooling.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > +#include <linux/pm_domain.h> > +#include <linux/pm_runtime.h> > +#include <asm/cpuidle.h> > +#include <asm/sbi.h> > +#include <asm/suspend.h> > + > +#include "dt_idle_states.h" > +#include "dt_idle_genpd.h" > + > +struct sbi_cpuidle_data { > + u32 *states; > + struct device *dev; > +}; > + > +struct sbi_domain_state { > + bool available; > + u32 state; > +}; > + > +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); > +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); > +static bool sbi_cpuidle_use_osi; > +static bool sbi_cpuidle_use_cpuhp; > +static bool sbi_cpuidle_pd_allow_domain_state; > + > +static inline void sbi_set_domain_state(u32 state) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = true; > + data->state = state; > +} > + > +static inline u32 sbi_get_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->state; > +} > + > +static inline void sbi_clear_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = false; > +} > + > +static inline bool sbi_is_domain_state_available(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->available; > +} > + > +static int sbi_suspend_finisher(unsigned long suspend_type, > + unsigned long resume_addr, > + unsigned long opaque) > +{ > + struct sbiret ret; > + > + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, > + suspend_type, resume_addr, opaque, 0, 0, 0); > + > + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; > +} > + > +static int sbi_suspend(u32 state) > +{ > + if (state & SBI_HSM_SUSP_NON_RET_BIT) > + return cpu_suspend(state, sbi_suspend_finisher); > + else > + return sbi_suspend_finisher(state, 0, 0); > +} > + > +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); > + > + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); > +} > + > +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx, > + bool s2idle) > +{ > + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); > + u32 *states = data->states; > + struct device *pd_dev = data->dev; > + u32 state; > + int ret; > + > + ret = cpu_pm_enter(); > + if (ret) > + return -1; > + > + /* Do runtime PM to manage a hierarchical CPU toplogy. */ > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_suspend(pd_dev); > + else > + pm_runtime_put_sync_suspend(pd_dev); > + rcu_irq_exit_irqson(); > + > + if (sbi_is_domain_state_available()) > + state = sbi_get_domain_state(); > + else > + state = states[idx]; > + > + ret = sbi_suspend(state) ? -1 : idx; > + > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_resume(pd_dev); > + else > + pm_runtime_get_sync(pd_dev); > + rcu_irq_exit_irqson(); > + > + cpu_pm_exit(); > + > + /* Clear the domain state to start fresh when back from idle. */ > + sbi_clear_domain_state(); > + return ret; > +} > + > +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, false); > +} > + > +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, > + int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, true); > +} > + > +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) > + pm_runtime_get_sync(pd_dev); > + > + return 0; > +} > + > +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) { > + pm_runtime_put_sync(pd_dev); > + /* Clear domain state to start fresh at next online. */ > + sbi_clear_domain_state(); > + } > + > + return 0; > +} > + > +static void sbi_idle_init_cpuhp(void) > +{ > + int err; > + > + if (!sbi_cpuidle_use_cpuhp) > + return; > + > + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, > + "cpuidle/sbi:online", > + sbi_cpuidle_cpuhp_up, > + sbi_cpuidle_cpuhp_down); > + if (err) > + pr_warn("Failed %d while setup cpuhp state\n", err); > +} > + > +static const struct of_device_id sbi_cpuidle_state_match[] = { > + { .compatible = "riscv,idle-state", > + .data = sbi_cpuidle_enter_state }, > + { }, > +}; > + > +static bool sbi_suspend_state_is_valid(u32 state) > +{ > + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_RET_PLATFORM) > + return false; > + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) > + return false; > + return true; > +} > + > +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) > +{ > + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); > + > + if (err) { > + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); > + return err; > + } > + > + if (!sbi_suspend_state_is_valid(*state)) { > + pr_warn("Invalid SBI suspend state %#x\n", *state); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, > + struct sbi_cpuidle_data *data, > + unsigned int state_count, int cpu) > +{ > + /* Currently limit the hierarchical topology to be used in OSI mode. */ > + if (!sbi_cpuidle_use_osi) > + return 0; > + > + data->dev = dt_idle_attach_cpu(cpu, "sbi"); > + if (IS_ERR_OR_NULL(data->dev)) > + return PTR_ERR_OR_ZERO(data->dev); > + > + /* > + * Using the deepest state for the CPU to trigger a potential selection > + * of a shared state for the domain, assumes the domain states are all > + * deeper states. > + */ > + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; > + drv->states[state_count - 1].enter_s2idle = > + sbi_enter_s2idle_domain_idle_state; > + sbi_cpuidle_use_cpuhp = true; > + > + return 0; > +} > + > +static int sbi_cpuidle_dt_init_states(struct device *dev, > + struct cpuidle_driver *drv, > + unsigned int cpu, > + unsigned int state_count) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + struct device_node *state_node; > + struct device_node *cpu_node; > + u32 *states; > + int i, ret; > + > + cpu_node = of_cpu_device_node_get(cpu); > + if (!cpu_node) > + return -ENODEV; > + > + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); > + if (!states) { > + ret = -ENOMEM; > + goto fail; > + } > + > + /* Parse SBI specific details from state DT nodes */ > + for (i = 1; i < state_count; i++) { > + state_node = of_get_cpu_state_node(cpu_node, i - 1); > + if (!state_node) > + break; > + > + ret = sbi_dt_parse_state_node(state_node, &states[i]); > + of_node_put(state_node); > + > + if (ret) > + return ret; > + > + pr_debug("sbi-state %#x index %d\n", states[i], i); > + } > + if (i != state_count) { > + ret = -ENODEV; > + goto fail; > + } > + > + /* Initialize optional data, used for the hierarchical topology. */ > + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); > + if (ret < 0) > + return ret; > + > + /* Store states in the per-cpu struct. */ > + data->states = states; > + > +fail: > + of_node_put(cpu_node); > + > + return ret; > +} > + > +static void sbi_cpuidle_deinit_cpu(int cpu) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + > + dt_idle_detach_cpu(data->dev); > + sbi_cpuidle_use_cpuhp = false; > +} > + > +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) > +{ > + struct cpuidle_driver *drv; > + unsigned int state_count = 0; > + int ret = 0; > + > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > + if (!drv) > + return -ENOMEM; > + > + drv->name = "sbi_cpuidle"; > + drv->owner = THIS_MODULE; > + drv->cpumask = (struct cpumask *)cpumask_of(cpu); > + > + /* RISC-V architectural WFI to be represented as state index 0. */ > + drv->states[0].enter = sbi_cpuidle_enter_state; > + drv->states[0].exit_latency = 1; > + drv->states[0].target_residency = 1; > + drv->states[0].power_usage = UINT_MAX; > + strcpy(drv->states[0].name, "WFI"); > + strcpy(drv->states[0].desc, "RISC-V WFI"); > + > + /* > + * If no DT idle states are detected (ret == 0) let the driver > + * initialization fail accordingly since there is no reason to > + * initialize the idle driver if only wfi is supported, the > + * default archictectural back-end already executes wfi > + * on idle entry. > + */ > + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); > + if (ret <= 0) { > + pr_debug("HART%ld: failed to parse DT idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret ? : -ENODEV; > + } > + state_count = ret + 1; /* Include WFI state as well */ > + > + /* Initialize idle states from DT. */ > + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); > + if (ret) { > + pr_err("HART%ld: failed to init idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret; > + } > + > + ret = cpuidle_register(drv, NULL); > + if (ret) > + goto deinit; > + > + cpuidle_cooling_register(drv); > + > + return 0; > +deinit: > + sbi_cpuidle_deinit_cpu(cpu); > + return ret; > +} > + > +static void sbi_cpuidle_domain_sync_state(struct device *dev) > +{ > + /* > + * All devices have now been attached/probed to the PM domain > + * topology, hence it's fine to allow domain states to be picked. > + */ > + sbi_cpuidle_pd_allow_domain_state = true; > +} > + > +#ifdef CONFIG_DT_IDLE_GENPD > + > +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) > +{ > + struct genpd_power_state *state = &pd->states[pd->state_idx]; > + u32 *pd_state; > + > + if (!state->data) > + return 0; > + > + if (!sbi_cpuidle_pd_allow_domain_state) > + return -EBUSY; > + > + /* OSI mode is enabled, set the corresponding domain state. */ > + pd_state = state->data; > + sbi_set_domain_state(*pd_state); > + > + return 0; > +} > + > +struct sbi_pd_provider { > + struct list_head link; > + struct device_node *node; > +}; > + > +static LIST_HEAD(sbi_pd_providers); > + > +static int sbi_pd_init(struct device_node *np) > +{ > + struct generic_pm_domain *pd; > + struct sbi_pd_provider *pd_provider; > + struct dev_power_governor *pd_gov; > + int ret = -ENOMEM, state_count = 0; > + > + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); > + if (!pd) > + goto out; > + > + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); > + if (!pd_provider) > + goto free_pd; > + > + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; > + > + /* Allow power off when OSI is available. */ > + if (sbi_cpuidle_use_osi) > + pd->power_off = sbi_cpuidle_pd_power_off; > + else > + pd->flags |= GENPD_FLAG_ALWAYS_ON; > + > + /* Use governor for CPU PM domains if it has some states to manage. */ > + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; > + > + ret = pm_genpd_init(pd, pd_gov, false); > + if (ret) > + goto free_pd_prov; > + > + ret = of_genpd_add_provider_simple(np, pd); > + if (ret) > + goto remove_pd; > + > + pd_provider->node = of_node_get(np); > + list_add(&pd_provider->link, &sbi_pd_providers); > + > + pr_debug("init PM domain %s\n", pd->name); > + return 0; > + > +remove_pd: > + pm_genpd_remove(pd); > +free_pd_prov: > + kfree(pd_provider); > +free_pd: > + dt_idle_pd_free(pd); > +out: > + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); > + return ret; > +} > + > +static void sbi_pd_remove(void) > +{ > + struct sbi_pd_provider *pd_provider, *it; > + struct generic_pm_domain *genpd; > + > + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { > + of_genpd_del_provider(pd_provider->node); > + > + genpd = of_genpd_remove_last(pd_provider->node); > + if (!IS_ERR(genpd)) > + kfree(genpd); > + > + of_node_put(pd_provider->node); > + list_del(&pd_provider->link); > + kfree(pd_provider); > + } > +} > + > +static int sbi_genpd_probe(struct device_node *np) > +{ > + struct device_node *node; > + int ret = 0, pd_count = 0; > + > + if (!np) > + return -ENODEV; > + > + /* > + * Parse child nodes for the "#power-domain-cells" property and > + * initialize a genpd/genpd-of-provider pair when it's found. > + */ > + for_each_child_of_node(np, node) { > + if (!of_find_property(node, "#power-domain-cells", NULL)) > + continue; > + > + ret = sbi_pd_init(node); > + if (ret) > + goto put_node; > + > + pd_count++; > + } > + > + /* Bail out if not using the hierarchical CPU topology. */ > + if (!pd_count) > + goto no_pd; > + > + /* Link genpd masters/subdomains to model the CPU topology. */ > + ret = dt_idle_pd_init_topology(np); > + if (ret) > + goto remove_pd; > + > + return 0; > + > +put_node: > + of_node_put(node); > +remove_pd: > + sbi_pd_remove(); > + pr_err("failed to create CPU PM domains ret=%d\n", ret); > +no_pd: > + return ret; > +} > + > +#else > + > +static inline int sbi_genpd_probe(struct device_node *np) > +{ > + return 0; > +} > + > +#endif > + > +static int sbi_cpuidle_probe(struct platform_device *pdev) > +{ > + int cpu, ret; > + struct cpuidle_driver *drv; > + struct cpuidle_device *dev; > + struct device_node *np, *pds_node; > + > + /* Detect OSI support based on CPU DT nodes */ > + sbi_cpuidle_use_osi = true; > + for_each_possible_cpu(cpu) { > + np = of_cpu_device_node_get(cpu); > + if (np && > + of_find_property(np, "power-domains", NULL) && > + of_find_property(np, "power-domain-names", NULL)) { > + continue; > + } else { > + sbi_cpuidle_use_osi = false; > + break; > + } > + } > + > + /* Populate generic power domains from DT nodes */ > + pds_node = of_find_node_by_path("/cpus/power-domains"); > + if (pds_node) { > + ret = sbi_genpd_probe(pds_node); > + of_node_put(pds_node); > + if (ret) > + return ret; > + } > + > + /* Initialize CPU idle driver for each CPU */ > + for_each_possible_cpu(cpu) { > + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); > + if (ret) { > + pr_debug("HART%ld: idle driver init failed\n", > + cpuid_to_hartid_map(cpu)); > + goto out_fail; > + } > + } > + > + /* Setup CPU hotplut notifiers */ > + sbi_idle_init_cpuhp(); > + > + pr_info("idle driver registered for all CPUs\n"); > + > + return 0; > + > +out_fail: > + while (--cpu >= 0) { > + dev = per_cpu(cpuidle_devices, cpu); > + drv = cpuidle_get_cpu_driver(dev); > + cpuidle_unregister(drv); > + sbi_cpuidle_deinit_cpu(cpu); > + } > + > + return ret; > +} > + > +static struct platform_driver sbi_cpuidle_driver = { > + .probe = sbi_cpuidle_probe, > + .driver = { > + .name = "sbi-cpuidle", > + .sync_state = sbi_cpuidle_domain_sync_state, > + }, > +}; > + > +static int __init sbi_cpuidle_init(void) > +{ > + int ret; > + struct platform_device *pdev; > + > + /* > + * The SBI HSM suspend function is only available when: > + * 1) SBI version is 0.3 or higher > + * 2) SBI HSM extension is available > + */ > + if ((sbi_spec_version < sbi_mk_version(0, 3)) || > + sbi_probe_extension(SBI_EXT_HSM) <= 0) { > + pr_info("HSM suspend not available\n"); > + return 0; > + } > + > + ret = platform_driver_register(&sbi_cpuidle_driver); > + if (ret) > + return ret; > + > + pdev = platform_device_register_simple("sbi-cpuidle", > + -1, NULL, 0); > + if (IS_ERR(pdev)) { > + platform_driver_unregister(&sbi_cpuidle_driver); > + return PTR_ERR(pdev); > + } > + > + return 0; > +} > +device_initcall(sbi_cpuidle_init); > -- > 2.25.1 > For the SBI part, Acked-by: Atish Patra <atishp@rivosinc.com> FYI.. SBI HSM suspend was included in SBI v0.3. The current version of the SBI specification (v1.0-rc2) is already frozen as per the RVI guidelines. All the comments received during the public review period have been addressed as well.
On 16 Feb 2022, at 08:09, Atish Patra <atishp@atishpatra.org> wrote: > > On Wed, Feb 9, 2022 at 9:51 PM Anup Patel <apatel@ventanamicro.com> wrote: >> >> From: Anup Patel <anup.patel@wdc.com> >> >> The RISC-V SBI HSM extension provides HSM suspend call which can >> be used by Linux RISC-V to enter platform specific low-power state. >> >> This patch adds a CPU idle driver based on RISC-V SBI calls which >> will populate idle states from device tree and use SBI calls to >> entry these idle states. >> >> Signed-off-by: Anup Patel <anup.patel@wdc.com> >> Signed-off-by: Anup Patel <apatel@ventanamicro.com> >> --- >> MAINTAINERS | 7 + >> drivers/cpuidle/Kconfig | 5 + >> drivers/cpuidle/Kconfig.riscv | 15 + >> drivers/cpuidle/Makefile | 4 + >> drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++ >> 5 files changed, 658 insertions(+) >> create mode 100644 drivers/cpuidle/Kconfig.riscv >> create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 39ece23e8d93..2ff0055a26a7 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -5058,6 +5058,13 @@ S: Supported >> F: drivers/cpuidle/dt_idle_genpd.c >> F: drivers/cpuidle/dt_idle_genpd.h >> >> +CPUIDLE DRIVER - RISC-V SBI >> +M: Anup Patel <anup@brainfault.org> >> +L: linux-pm@vger.kernel.org >> +L: linux-riscv@lists.infradead.org >> +S: Maintained >> +F: drivers/cpuidle/cpuidle-riscv-sbi.c >> + >> CRAMFS FILESYSTEM >> M: Nicolas Pitre <nico@fluxnic.net> >> S: Maintained >> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig >> index f1afe7ab6b54..ff71dd662880 100644 >> --- a/drivers/cpuidle/Kconfig >> +++ b/drivers/cpuidle/Kconfig >> @@ -66,6 +66,11 @@ depends on PPC >> source "drivers/cpuidle/Kconfig.powerpc" >> endmenu >> >> +menu "RISC-V CPU Idle Drivers" >> +depends on RISCV >> +source "drivers/cpuidle/Kconfig.riscv" >> +endmenu >> + >> config HALTPOLL_CPUIDLE >> tristate "Halt poll cpuidle driver" >> depends on X86 && KVM_GUEST >> diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv >> new file mode 100644 >> index 000000000000..78518c26af74 >> --- /dev/null >> +++ b/drivers/cpuidle/Kconfig.riscv >> @@ -0,0 +1,15 @@ >> +# SPDX-License-Identifier: GPL-2.0-only >> +# >> +# RISC-V CPU Idle drivers >> +# >> + >> +config RISCV_SBI_CPUIDLE >> + bool "RISC-V SBI CPU idle Driver" >> + depends on RISCV_SBI >> + select DT_IDLE_STATES >> + select CPU_IDLE_MULTIPLE_DRIVERS >> + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF >> + help >> + Select this option to enable RISC-V SBI firmware based CPU idle >> + driver for RISC-V systems. This drivers also supports hierarchical >> + DT based layout of the idle state. >> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile >> index 11a26cef279f..d103342b7cfc 100644 >> --- a/drivers/cpuidle/Makefile >> +++ b/drivers/cpuidle/Makefile >> @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o >> # POWERPC drivers >> obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o >> obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o >> + >> +############################################################################### >> +# RISC-V drivers >> +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o >> diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c >> new file mode 100644 >> index 000000000000..b459eda2cd37 >> --- /dev/null >> +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c >> @@ -0,0 +1,627 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * RISC-V SBI CPU idle driver. >> + * >> + * Copyright (c) 2021 Western Digital Corporation or its affiliates. >> + * Copyright (c) 2022 Ventana Micro Systems Inc. >> + */ >> + >> +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt >> + >> +#include <linux/cpuidle.h> >> +#include <linux/cpumask.h> >> +#include <linux/cpu_pm.h> >> +#include <linux/cpu_cooling.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_device.h> >> +#include <linux/slab.h> >> +#include <linux/platform_device.h> >> +#include <linux/pm_domain.h> >> +#include <linux/pm_runtime.h> >> +#include <asm/cpuidle.h> >> +#include <asm/sbi.h> >> +#include <asm/suspend.h> >> + >> +#include "dt_idle_states.h" >> +#include "dt_idle_genpd.h" >> + >> +struct sbi_cpuidle_data { >> + u32 *states; >> + struct device *dev; >> +}; >> + >> +struct sbi_domain_state { >> + bool available; >> + u32 state; >> +}; >> + >> +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); >> +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); >> +static bool sbi_cpuidle_use_osi; >> +static bool sbi_cpuidle_use_cpuhp; >> +static bool sbi_cpuidle_pd_allow_domain_state; >> + >> +static inline void sbi_set_domain_state(u32 state) >> +{ >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); >> + >> + data->available = true; >> + data->state = state; >> +} >> + >> +static inline u32 sbi_get_domain_state(void) >> +{ >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); >> + >> + return data->state; >> +} >> + >> +static inline void sbi_clear_domain_state(void) >> +{ >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); >> + >> + data->available = false; >> +} >> + >> +static inline bool sbi_is_domain_state_available(void) >> +{ >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); >> + >> + return data->available; >> +} >> + >> +static int sbi_suspend_finisher(unsigned long suspend_type, >> + unsigned long resume_addr, >> + unsigned long opaque) >> +{ >> + struct sbiret ret; >> + >> + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, >> + suspend_type, resume_addr, opaque, 0, 0, 0); >> + >> + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; >> +} >> + >> +static int sbi_suspend(u32 state) >> +{ >> + if (state & SBI_HSM_SUSP_NON_RET_BIT) >> + return cpu_suspend(state, sbi_suspend_finisher); >> + else >> + return sbi_suspend_finisher(state, 0, 0); >> +} >> + >> +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, >> + struct cpuidle_driver *drv, int idx) >> +{ >> + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); >> + >> + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); >> +} >> + >> +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, >> + struct cpuidle_driver *drv, int idx, >> + bool s2idle) >> +{ >> + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); >> + u32 *states = data->states; >> + struct device *pd_dev = data->dev; >> + u32 state; >> + int ret; >> + >> + ret = cpu_pm_enter(); >> + if (ret) >> + return -1; >> + >> + /* Do runtime PM to manage a hierarchical CPU toplogy. */ >> + rcu_irq_enter_irqson(); >> + if (s2idle) >> + dev_pm_genpd_suspend(pd_dev); >> + else >> + pm_runtime_put_sync_suspend(pd_dev); >> + rcu_irq_exit_irqson(); >> + >> + if (sbi_is_domain_state_available()) >> + state = sbi_get_domain_state(); >> + else >> + state = states[idx]; >> + >> + ret = sbi_suspend(state) ? -1 : idx; >> + >> + rcu_irq_enter_irqson(); >> + if (s2idle) >> + dev_pm_genpd_resume(pd_dev); >> + else >> + pm_runtime_get_sync(pd_dev); >> + rcu_irq_exit_irqson(); >> + >> + cpu_pm_exit(); >> + >> + /* Clear the domain state to start fresh when back from idle. */ >> + sbi_clear_domain_state(); >> + return ret; >> +} >> + >> +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, >> + struct cpuidle_driver *drv, int idx) >> +{ >> + return __sbi_enter_domain_idle_state(dev, drv, idx, false); >> +} >> + >> +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, >> + struct cpuidle_driver *drv, >> + int idx) >> +{ >> + return __sbi_enter_domain_idle_state(dev, drv, idx, true); >> +} >> + >> +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) >> +{ >> + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); >> + >> + if (pd_dev) >> + pm_runtime_get_sync(pd_dev); >> + >> + return 0; >> +} >> + >> +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) >> +{ >> + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); >> + >> + if (pd_dev) { >> + pm_runtime_put_sync(pd_dev); >> + /* Clear domain state to start fresh at next online. */ >> + sbi_clear_domain_state(); >> + } >> + >> + return 0; >> +} >> + >> +static void sbi_idle_init_cpuhp(void) >> +{ >> + int err; >> + >> + if (!sbi_cpuidle_use_cpuhp) >> + return; >> + >> + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, >> + "cpuidle/sbi:online", >> + sbi_cpuidle_cpuhp_up, >> + sbi_cpuidle_cpuhp_down); >> + if (err) >> + pr_warn("Failed %d while setup cpuhp state\n", err); >> +} >> + >> +static const struct of_device_id sbi_cpuidle_state_match[] = { >> + { .compatible = "riscv,idle-state", >> + .data = sbi_cpuidle_enter_state }, >> + { }, >> +}; >> + >> +static bool sbi_suspend_state_is_valid(u32 state) >> +{ >> + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && >> + state < SBI_HSM_SUSPEND_RET_PLATFORM) >> + return false; >> + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && >> + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) >> + return false; >> + return true; >> +} >> + >> +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) >> +{ >> + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); >> + >> + if (err) { >> + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); >> + return err; >> + } >> + >> + if (!sbi_suspend_state_is_valid(*state)) { >> + pr_warn("Invalid SBI suspend state %#x\n", *state); >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, >> + struct sbi_cpuidle_data *data, >> + unsigned int state_count, int cpu) >> +{ >> + /* Currently limit the hierarchical topology to be used in OSI mode. */ >> + if (!sbi_cpuidle_use_osi) >> + return 0; >> + >> + data->dev = dt_idle_attach_cpu(cpu, "sbi"); >> + if (IS_ERR_OR_NULL(data->dev)) >> + return PTR_ERR_OR_ZERO(data->dev); >> + >> + /* >> + * Using the deepest state for the CPU to trigger a potential selection >> + * of a shared state for the domain, assumes the domain states are all >> + * deeper states. >> + */ >> + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; >> + drv->states[state_count - 1].enter_s2idle = >> + sbi_enter_s2idle_domain_idle_state; >> + sbi_cpuidle_use_cpuhp = true; >> + >> + return 0; >> +} >> + >> +static int sbi_cpuidle_dt_init_states(struct device *dev, >> + struct cpuidle_driver *drv, >> + unsigned int cpu, >> + unsigned int state_count) >> +{ >> + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); >> + struct device_node *state_node; >> + struct device_node *cpu_node; >> + u32 *states; >> + int i, ret; >> + >> + cpu_node = of_cpu_device_node_get(cpu); >> + if (!cpu_node) >> + return -ENODEV; >> + >> + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); >> + if (!states) { >> + ret = -ENOMEM; >> + goto fail; >> + } >> + >> + /* Parse SBI specific details from state DT nodes */ >> + for (i = 1; i < state_count; i++) { >> + state_node = of_get_cpu_state_node(cpu_node, i - 1); >> + if (!state_node) >> + break; >> + >> + ret = sbi_dt_parse_state_node(state_node, &states[i]); >> + of_node_put(state_node); >> + >> + if (ret) >> + return ret; >> + >> + pr_debug("sbi-state %#x index %d\n", states[i], i); >> + } >> + if (i != state_count) { >> + ret = -ENODEV; >> + goto fail; >> + } >> + >> + /* Initialize optional data, used for the hierarchical topology. */ >> + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); >> + if (ret < 0) >> + return ret; >> + >> + /* Store states in the per-cpu struct. */ >> + data->states = states; >> + >> +fail: >> + of_node_put(cpu_node); >> + >> + return ret; >> +} >> + >> +static void sbi_cpuidle_deinit_cpu(int cpu) >> +{ >> + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); >> + >> + dt_idle_detach_cpu(data->dev); >> + sbi_cpuidle_use_cpuhp = false; >> +} >> + >> +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) >> +{ >> + struct cpuidle_driver *drv; >> + unsigned int state_count = 0; >> + int ret = 0; >> + >> + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); >> + if (!drv) >> + return -ENOMEM; >> + >> + drv->name = "sbi_cpuidle"; >> + drv->owner = THIS_MODULE; >> + drv->cpumask = (struct cpumask *)cpumask_of(cpu); >> + >> + /* RISC-V architectural WFI to be represented as state index 0. */ >> + drv->states[0].enter = sbi_cpuidle_enter_state; >> + drv->states[0].exit_latency = 1; >> + drv->states[0].target_residency = 1; >> + drv->states[0].power_usage = UINT_MAX; >> + strcpy(drv->states[0].name, "WFI"); >> + strcpy(drv->states[0].desc, "RISC-V WFI"); >> + >> + /* >> + * If no DT idle states are detected (ret == 0) let the driver >> + * initialization fail accordingly since there is no reason to >> + * initialize the idle driver if only wfi is supported, the >> + * default archictectural back-end already executes wfi >> + * on idle entry. >> + */ >> + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); >> + if (ret <= 0) { >> + pr_debug("HART%ld: failed to parse DT idle states\n", >> + cpuid_to_hartid_map(cpu)); >> + return ret ? : -ENODEV; >> + } >> + state_count = ret + 1; /* Include WFI state as well */ >> + >> + /* Initialize idle states from DT. */ >> + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); >> + if (ret) { >> + pr_err("HART%ld: failed to init idle states\n", >> + cpuid_to_hartid_map(cpu)); >> + return ret; >> + } >> + >> + ret = cpuidle_register(drv, NULL); >> + if (ret) >> + goto deinit; >> + >> + cpuidle_cooling_register(drv); >> + >> + return 0; >> +deinit: >> + sbi_cpuidle_deinit_cpu(cpu); >> + return ret; >> +} >> + >> +static void sbi_cpuidle_domain_sync_state(struct device *dev) >> +{ >> + /* >> + * All devices have now been attached/probed to the PM domain >> + * topology, hence it's fine to allow domain states to be picked. >> + */ >> + sbi_cpuidle_pd_allow_domain_state = true; >> +} >> + >> +#ifdef CONFIG_DT_IDLE_GENPD >> + >> +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) >> +{ >> + struct genpd_power_state *state = &pd->states[pd->state_idx]; >> + u32 *pd_state; >> + >> + if (!state->data) >> + return 0; >> + >> + if (!sbi_cpuidle_pd_allow_domain_state) >> + return -EBUSY; >> + >> + /* OSI mode is enabled, set the corresponding domain state. */ >> + pd_state = state->data; >> + sbi_set_domain_state(*pd_state); >> + >> + return 0; >> +} >> + >> +struct sbi_pd_provider { >> + struct list_head link; >> + struct device_node *node; >> +}; >> + >> +static LIST_HEAD(sbi_pd_providers); >> + >> +static int sbi_pd_init(struct device_node *np) >> +{ >> + struct generic_pm_domain *pd; >> + struct sbi_pd_provider *pd_provider; >> + struct dev_power_governor *pd_gov; >> + int ret = -ENOMEM, state_count = 0; >> + >> + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); >> + if (!pd) >> + goto out; >> + >> + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); >> + if (!pd_provider) >> + goto free_pd; >> + >> + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; >> + >> + /* Allow power off when OSI is available. */ >> + if (sbi_cpuidle_use_osi) >> + pd->power_off = sbi_cpuidle_pd_power_off; >> + else >> + pd->flags |= GENPD_FLAG_ALWAYS_ON; >> + >> + /* Use governor for CPU PM domains if it has some states to manage. */ >> + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; >> + >> + ret = pm_genpd_init(pd, pd_gov, false); >> + if (ret) >> + goto free_pd_prov; >> + >> + ret = of_genpd_add_provider_simple(np, pd); >> + if (ret) >> + goto remove_pd; >> + >> + pd_provider->node = of_node_get(np); >> + list_add(&pd_provider->link, &sbi_pd_providers); >> + >> + pr_debug("init PM domain %s\n", pd->name); >> + return 0; >> + >> +remove_pd: >> + pm_genpd_remove(pd); >> +free_pd_prov: >> + kfree(pd_provider); >> +free_pd: >> + dt_idle_pd_free(pd); >> +out: >> + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); >> + return ret; >> +} >> + >> +static void sbi_pd_remove(void) >> +{ >> + struct sbi_pd_provider *pd_provider, *it; >> + struct generic_pm_domain *genpd; >> + >> + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { >> + of_genpd_del_provider(pd_provider->node); >> + >> + genpd = of_genpd_remove_last(pd_provider->node); >> + if (!IS_ERR(genpd)) >> + kfree(genpd); >> + >> + of_node_put(pd_provider->node); >> + list_del(&pd_provider->link); >> + kfree(pd_provider); >> + } >> +} >> + >> +static int sbi_genpd_probe(struct device_node *np) >> +{ >> + struct device_node *node; >> + int ret = 0, pd_count = 0; >> + >> + if (!np) >> + return -ENODEV; >> + >> + /* >> + * Parse child nodes for the "#power-domain-cells" property and >> + * initialize a genpd/genpd-of-provider pair when it's found. >> + */ >> + for_each_child_of_node(np, node) { >> + if (!of_find_property(node, "#power-domain-cells", NULL)) >> + continue; >> + >> + ret = sbi_pd_init(node); >> + if (ret) >> + goto put_node; >> + >> + pd_count++; >> + } >> + >> + /* Bail out if not using the hierarchical CPU topology. */ >> + if (!pd_count) >> + goto no_pd; >> + >> + /* Link genpd masters/subdomains to model the CPU topology. */ >> + ret = dt_idle_pd_init_topology(np); >> + if (ret) >> + goto remove_pd; >> + >> + return 0; >> + >> +put_node: >> + of_node_put(node); >> +remove_pd: >> + sbi_pd_remove(); >> + pr_err("failed to create CPU PM domains ret=%d\n", ret); >> +no_pd: >> + return ret; >> +} >> + >> +#else >> + >> +static inline int sbi_genpd_probe(struct device_node *np) >> +{ >> + return 0; >> +} >> + >> +#endif >> + >> +static int sbi_cpuidle_probe(struct platform_device *pdev) >> +{ >> + int cpu, ret; >> + struct cpuidle_driver *drv; >> + struct cpuidle_device *dev; >> + struct device_node *np, *pds_node; >> + >> + /* Detect OSI support based on CPU DT nodes */ >> + sbi_cpuidle_use_osi = true; >> + for_each_possible_cpu(cpu) { >> + np = of_cpu_device_node_get(cpu); >> + if (np && >> + of_find_property(np, "power-domains", NULL) && >> + of_find_property(np, "power-domain-names", NULL)) { >> + continue; >> + } else { >> + sbi_cpuidle_use_osi = false; >> + break; >> + } >> + } >> + >> + /* Populate generic power domains from DT nodes */ >> + pds_node = of_find_node_by_path("/cpus/power-domains"); >> + if (pds_node) { >> + ret = sbi_genpd_probe(pds_node); >> + of_node_put(pds_node); >> + if (ret) >> + return ret; >> + } >> + >> + /* Initialize CPU idle driver for each CPU */ >> + for_each_possible_cpu(cpu) { >> + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); >> + if (ret) { >> + pr_debug("HART%ld: idle driver init failed\n", >> + cpuid_to_hartid_map(cpu)); >> + goto out_fail; >> + } >> + } >> + >> + /* Setup CPU hotplut notifiers */ >> + sbi_idle_init_cpuhp(); >> + >> + pr_info("idle driver registered for all CPUs\n"); >> + >> + return 0; >> + >> +out_fail: >> + while (--cpu >= 0) { >> + dev = per_cpu(cpuidle_devices, cpu); >> + drv = cpuidle_get_cpu_driver(dev); >> + cpuidle_unregister(drv); >> + sbi_cpuidle_deinit_cpu(cpu); >> + } >> + >> + return ret; >> +} >> + >> +static struct platform_driver sbi_cpuidle_driver = { >> + .probe = sbi_cpuidle_probe, >> + .driver = { >> + .name = "sbi-cpuidle", >> + .sync_state = sbi_cpuidle_domain_sync_state, >> + }, >> +}; >> + >> +static int __init sbi_cpuidle_init(void) >> +{ >> + int ret; >> + struct platform_device *pdev; >> + >> + /* >> + * The SBI HSM suspend function is only available when: >> + * 1) SBI version is 0.3 or higher >> + * 2) SBI HSM extension is available >> + */ >> + if ((sbi_spec_version < sbi_mk_version(0, 3)) || >> + sbi_probe_extension(SBI_EXT_HSM) <= 0) { >> + pr_info("HSM suspend not available\n"); >> + return 0; >> + } >> + >> + ret = platform_driver_register(&sbi_cpuidle_driver); >> + if (ret) >> + return ret; >> + >> + pdev = platform_device_register_simple("sbi-cpuidle", >> + -1, NULL, 0); >> + if (IS_ERR(pdev)) { >> + platform_driver_unregister(&sbi_cpuidle_driver); >> + return PTR_ERR(pdev); >> + } >> + >> + return 0; >> +} >> +device_initcall(sbi_cpuidle_init); >> -- >> 2.25.1 >> > > For the SBI part, > Acked-by: Atish Patra <atishp@rivosinc.com> > > FYI.. > SBI HSM suspend was included in SBI v0.3. The current version of the > SBI specification (v1.0-rc2) > is already frozen as per the RVI guidelines. All the comments received > during the public review period > have been addressed as well. Yet not all comments from *before* the public review period. Jess
On Wed, Feb 16, 2022 at 5:45 AM Jessica Clarke <jrtc27@jrtc27.com> wrote: > > On 16 Feb 2022, at 08:09, Atish Patra <atishp@atishpatra.org> wrote: > > > > On Wed, Feb 9, 2022 at 9:51 PM Anup Patel <apatel@ventanamicro.com> wrote: > >> > >> From: Anup Patel <anup.patel@wdc.com> > >> > >> The RISC-V SBI HSM extension provides HSM suspend call which can > >> be used by Linux RISC-V to enter platform specific low-power state. > >> > >> This patch adds a CPU idle driver based on RISC-V SBI calls which > >> will populate idle states from device tree and use SBI calls to > >> entry these idle states. > >> > >> Signed-off-by: Anup Patel <anup.patel@wdc.com> > >> Signed-off-by: Anup Patel <apatel@ventanamicro.com> > >> --- > >> MAINTAINERS | 7 + > >> drivers/cpuidle/Kconfig | 5 + > >> drivers/cpuidle/Kconfig.riscv | 15 + > >> drivers/cpuidle/Makefile | 4 + > >> drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++ > >> 5 files changed, 658 insertions(+) > >> create mode 100644 drivers/cpuidle/Kconfig.riscv > >> create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c > >> > >> diff --git a/MAINTAINERS b/MAINTAINERS > >> index 39ece23e8d93..2ff0055a26a7 100644 > >> --- a/MAINTAINERS > >> +++ b/MAINTAINERS > >> @@ -5058,6 +5058,13 @@ S: Supported > >> F: drivers/cpuidle/dt_idle_genpd.c > >> F: drivers/cpuidle/dt_idle_genpd.h > >> > >> +CPUIDLE DRIVER - RISC-V SBI > >> +M: Anup Patel <anup@brainfault.org> > >> +L: linux-pm@vger.kernel.org > >> +L: linux-riscv@lists.infradead.org > >> +S: Maintained > >> +F: drivers/cpuidle/cpuidle-riscv-sbi.c > >> + > >> CRAMFS FILESYSTEM > >> M: Nicolas Pitre <nico@fluxnic.net> > >> S: Maintained > >> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig > >> index f1afe7ab6b54..ff71dd662880 100644 > >> --- a/drivers/cpuidle/Kconfig > >> +++ b/drivers/cpuidle/Kconfig > >> @@ -66,6 +66,11 @@ depends on PPC > >> source "drivers/cpuidle/Kconfig.powerpc" > >> endmenu > >> > >> +menu "RISC-V CPU Idle Drivers" > >> +depends on RISCV > >> +source "drivers/cpuidle/Kconfig.riscv" > >> +endmenu > >> + > >> config HALTPOLL_CPUIDLE > >> tristate "Halt poll cpuidle driver" > >> depends on X86 && KVM_GUEST > >> diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv > >> new file mode 100644 > >> index 000000000000..78518c26af74 > >> --- /dev/null > >> +++ b/drivers/cpuidle/Kconfig.riscv > >> @@ -0,0 +1,15 @@ > >> +# SPDX-License-Identifier: GPL-2.0-only > >> +# > >> +# RISC-V CPU Idle drivers > >> +# > >> + > >> +config RISCV_SBI_CPUIDLE > >> + bool "RISC-V SBI CPU idle Driver" > >> + depends on RISCV_SBI > >> + select DT_IDLE_STATES > >> + select CPU_IDLE_MULTIPLE_DRIVERS > >> + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF > >> + help > >> + Select this option to enable RISC-V SBI firmware based CPU idle > >> + driver for RISC-V systems. This drivers also supports hierarchical > >> + DT based layout of the idle state. > >> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile > >> index 11a26cef279f..d103342b7cfc 100644 > >> --- a/drivers/cpuidle/Makefile > >> +++ b/drivers/cpuidle/Makefile > >> @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o > >> # POWERPC drivers > >> obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o > >> obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o > >> + > >> +############################################################################### > >> +# RISC-V drivers > >> +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o > >> diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c > >> new file mode 100644 > >> index 000000000000..b459eda2cd37 > >> --- /dev/null > >> +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c > >> @@ -0,0 +1,627 @@ > >> +// SPDX-License-Identifier: GPL-2.0-only > >> +/* > >> + * RISC-V SBI CPU idle driver. > >> + * > >> + * Copyright (c) 2021 Western Digital Corporation or its affiliates. > >> + * Copyright (c) 2022 Ventana Micro Systems Inc. > >> + */ > >> + > >> +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt > >> + > >> +#include <linux/cpuidle.h> > >> +#include <linux/cpumask.h> > >> +#include <linux/cpu_pm.h> > >> +#include <linux/cpu_cooling.h> > >> +#include <linux/kernel.h> > >> +#include <linux/module.h> > >> +#include <linux/of.h> > >> +#include <linux/of_device.h> > >> +#include <linux/slab.h> > >> +#include <linux/platform_device.h> > >> +#include <linux/pm_domain.h> > >> +#include <linux/pm_runtime.h> > >> +#include <asm/cpuidle.h> > >> +#include <asm/sbi.h> > >> +#include <asm/suspend.h> > >> + > >> +#include "dt_idle_states.h" > >> +#include "dt_idle_genpd.h" > >> + > >> +struct sbi_cpuidle_data { > >> + u32 *states; > >> + struct device *dev; > >> +}; > >> + > >> +struct sbi_domain_state { > >> + bool available; > >> + u32 state; > >> +}; > >> + > >> +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); > >> +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); > >> +static bool sbi_cpuidle_use_osi; > >> +static bool sbi_cpuidle_use_cpuhp; > >> +static bool sbi_cpuidle_pd_allow_domain_state; > >> + > >> +static inline void sbi_set_domain_state(u32 state) > >> +{ > >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > >> + > >> + data->available = true; > >> + data->state = state; > >> +} > >> + > >> +static inline u32 sbi_get_domain_state(void) > >> +{ > >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > >> + > >> + return data->state; > >> +} > >> + > >> +static inline void sbi_clear_domain_state(void) > >> +{ > >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > >> + > >> + data->available = false; > >> +} > >> + > >> +static inline bool sbi_is_domain_state_available(void) > >> +{ > >> + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > >> + > >> + return data->available; > >> +} > >> + > >> +static int sbi_suspend_finisher(unsigned long suspend_type, > >> + unsigned long resume_addr, > >> + unsigned long opaque) > >> +{ > >> + struct sbiret ret; > >> + > >> + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, > >> + suspend_type, resume_addr, opaque, 0, 0, 0); > >> + > >> + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; > >> +} > >> + > >> +static int sbi_suspend(u32 state) > >> +{ > >> + if (state & SBI_HSM_SUSP_NON_RET_BIT) > >> + return cpu_suspend(state, sbi_suspend_finisher); > >> + else > >> + return sbi_suspend_finisher(state, 0, 0); > >> +} > >> + > >> +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, > >> + struct cpuidle_driver *drv, int idx) > >> +{ > >> + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); > >> + > >> + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); > >> +} > >> + > >> +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, > >> + struct cpuidle_driver *drv, int idx, > >> + bool s2idle) > >> +{ > >> + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); > >> + u32 *states = data->states; > >> + struct device *pd_dev = data->dev; > >> + u32 state; > >> + int ret; > >> + > >> + ret = cpu_pm_enter(); > >> + if (ret) > >> + return -1; > >> + > >> + /* Do runtime PM to manage a hierarchical CPU toplogy. */ > >> + rcu_irq_enter_irqson(); > >> + if (s2idle) > >> + dev_pm_genpd_suspend(pd_dev); > >> + else > >> + pm_runtime_put_sync_suspend(pd_dev); > >> + rcu_irq_exit_irqson(); > >> + > >> + if (sbi_is_domain_state_available()) > >> + state = sbi_get_domain_state(); > >> + else > >> + state = states[idx]; > >> + > >> + ret = sbi_suspend(state) ? -1 : idx; > >> + > >> + rcu_irq_enter_irqson(); > >> + if (s2idle) > >> + dev_pm_genpd_resume(pd_dev); > >> + else > >> + pm_runtime_get_sync(pd_dev); > >> + rcu_irq_exit_irqson(); > >> + > >> + cpu_pm_exit(); > >> + > >> + /* Clear the domain state to start fresh when back from idle. */ > >> + sbi_clear_domain_state(); > >> + return ret; > >> +} > >> + > >> +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, > >> + struct cpuidle_driver *drv, int idx) > >> +{ > >> + return __sbi_enter_domain_idle_state(dev, drv, idx, false); > >> +} > >> + > >> +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, > >> + struct cpuidle_driver *drv, > >> + int idx) > >> +{ > >> + return __sbi_enter_domain_idle_state(dev, drv, idx, true); > >> +} > >> + > >> +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) > >> +{ > >> + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > >> + > >> + if (pd_dev) > >> + pm_runtime_get_sync(pd_dev); > >> + > >> + return 0; > >> +} > >> + > >> +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) > >> +{ > >> + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > >> + > >> + if (pd_dev) { > >> + pm_runtime_put_sync(pd_dev); > >> + /* Clear domain state to start fresh at next online. */ > >> + sbi_clear_domain_state(); > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static void sbi_idle_init_cpuhp(void) > >> +{ > >> + int err; > >> + > >> + if (!sbi_cpuidle_use_cpuhp) > >> + return; > >> + > >> + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, > >> + "cpuidle/sbi:online", > >> + sbi_cpuidle_cpuhp_up, > >> + sbi_cpuidle_cpuhp_down); > >> + if (err) > >> + pr_warn("Failed %d while setup cpuhp state\n", err); > >> +} > >> + > >> +static const struct of_device_id sbi_cpuidle_state_match[] = { > >> + { .compatible = "riscv,idle-state", > >> + .data = sbi_cpuidle_enter_state }, > >> + { }, > >> +}; > >> + > >> +static bool sbi_suspend_state_is_valid(u32 state) > >> +{ > >> + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && > >> + state < SBI_HSM_SUSPEND_RET_PLATFORM) > >> + return false; > >> + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && > >> + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) > >> + return false; > >> + return true; > >> +} > >> + > >> +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) > >> +{ > >> + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); > >> + > >> + if (err) { > >> + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); > >> + return err; > >> + } > >> + > >> + if (!sbi_suspend_state_is_valid(*state)) { > >> + pr_warn("Invalid SBI suspend state %#x\n", *state); > >> + return -EINVAL; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, > >> + struct sbi_cpuidle_data *data, > >> + unsigned int state_count, int cpu) > >> +{ > >> + /* Currently limit the hierarchical topology to be used in OSI mode. */ > >> + if (!sbi_cpuidle_use_osi) > >> + return 0; > >> + > >> + data->dev = dt_idle_attach_cpu(cpu, "sbi"); > >> + if (IS_ERR_OR_NULL(data->dev)) > >> + return PTR_ERR_OR_ZERO(data->dev); > >> + > >> + /* > >> + * Using the deepest state for the CPU to trigger a potential selection > >> + * of a shared state for the domain, assumes the domain states are all > >> + * deeper states. > >> + */ > >> + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; > >> + drv->states[state_count - 1].enter_s2idle = > >> + sbi_enter_s2idle_domain_idle_state; > >> + sbi_cpuidle_use_cpuhp = true; > >> + > >> + return 0; > >> +} > >> + > >> +static int sbi_cpuidle_dt_init_states(struct device *dev, > >> + struct cpuidle_driver *drv, > >> + unsigned int cpu, > >> + unsigned int state_count) > >> +{ > >> + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > >> + struct device_node *state_node; > >> + struct device_node *cpu_node; > >> + u32 *states; > >> + int i, ret; > >> + > >> + cpu_node = of_cpu_device_node_get(cpu); > >> + if (!cpu_node) > >> + return -ENODEV; > >> + > >> + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); > >> + if (!states) { > >> + ret = -ENOMEM; > >> + goto fail; > >> + } > >> + > >> + /* Parse SBI specific details from state DT nodes */ > >> + for (i = 1; i < state_count; i++) { > >> + state_node = of_get_cpu_state_node(cpu_node, i - 1); > >> + if (!state_node) > >> + break; > >> + > >> + ret = sbi_dt_parse_state_node(state_node, &states[i]); > >> + of_node_put(state_node); > >> + > >> + if (ret) > >> + return ret; > >> + > >> + pr_debug("sbi-state %#x index %d\n", states[i], i); > >> + } > >> + if (i != state_count) { > >> + ret = -ENODEV; > >> + goto fail; > >> + } > >> + > >> + /* Initialize optional data, used for the hierarchical topology. */ > >> + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); > >> + if (ret < 0) > >> + return ret; > >> + > >> + /* Store states in the per-cpu struct. */ > >> + data->states = states; > >> + > >> +fail: > >> + of_node_put(cpu_node); > >> + > >> + return ret; > >> +} > >> + > >> +static void sbi_cpuidle_deinit_cpu(int cpu) > >> +{ > >> + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > >> + > >> + dt_idle_detach_cpu(data->dev); > >> + sbi_cpuidle_use_cpuhp = false; > >> +} > >> + > >> +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) > >> +{ > >> + struct cpuidle_driver *drv; > >> + unsigned int state_count = 0; > >> + int ret = 0; > >> + > >> + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > >> + if (!drv) > >> + return -ENOMEM; > >> + > >> + drv->name = "sbi_cpuidle"; > >> + drv->owner = THIS_MODULE; > >> + drv->cpumask = (struct cpumask *)cpumask_of(cpu); > >> + > >> + /* RISC-V architectural WFI to be represented as state index 0. */ > >> + drv->states[0].enter = sbi_cpuidle_enter_state; > >> + drv->states[0].exit_latency = 1; > >> + drv->states[0].target_residency = 1; > >> + drv->states[0].power_usage = UINT_MAX; > >> + strcpy(drv->states[0].name, "WFI"); > >> + strcpy(drv->states[0].desc, "RISC-V WFI"); > >> + > >> + /* > >> + * If no DT idle states are detected (ret == 0) let the driver > >> + * initialization fail accordingly since there is no reason to > >> + * initialize the idle driver if only wfi is supported, the > >> + * default archictectural back-end already executes wfi > >> + * on idle entry. > >> + */ > >> + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); > >> + if (ret <= 0) { > >> + pr_debug("HART%ld: failed to parse DT idle states\n", > >> + cpuid_to_hartid_map(cpu)); > >> + return ret ? : -ENODEV; > >> + } > >> + state_count = ret + 1; /* Include WFI state as well */ > >> + > >> + /* Initialize idle states from DT. */ > >> + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); > >> + if (ret) { > >> + pr_err("HART%ld: failed to init idle states\n", > >> + cpuid_to_hartid_map(cpu)); > >> + return ret; > >> + } > >> + > >> + ret = cpuidle_register(drv, NULL); > >> + if (ret) > >> + goto deinit; > >> + > >> + cpuidle_cooling_register(drv); > >> + > >> + return 0; > >> +deinit: > >> + sbi_cpuidle_deinit_cpu(cpu); > >> + return ret; > >> +} > >> + > >> +static void sbi_cpuidle_domain_sync_state(struct device *dev) > >> +{ > >> + /* > >> + * All devices have now been attached/probed to the PM domain > >> + * topology, hence it's fine to allow domain states to be picked. > >> + */ > >> + sbi_cpuidle_pd_allow_domain_state = true; > >> +} > >> + > >> +#ifdef CONFIG_DT_IDLE_GENPD > >> + > >> +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) > >> +{ > >> + struct genpd_power_state *state = &pd->states[pd->state_idx]; > >> + u32 *pd_state; > >> + > >> + if (!state->data) > >> + return 0; > >> + > >> + if (!sbi_cpuidle_pd_allow_domain_state) > >> + return -EBUSY; > >> + > >> + /* OSI mode is enabled, set the corresponding domain state. */ > >> + pd_state = state->data; > >> + sbi_set_domain_state(*pd_state); > >> + > >> + return 0; > >> +} > >> + > >> +struct sbi_pd_provider { > >> + struct list_head link; > >> + struct device_node *node; > >> +}; > >> + > >> +static LIST_HEAD(sbi_pd_providers); > >> + > >> +static int sbi_pd_init(struct device_node *np) > >> +{ > >> + struct generic_pm_domain *pd; > >> + struct sbi_pd_provider *pd_provider; > >> + struct dev_power_governor *pd_gov; > >> + int ret = -ENOMEM, state_count = 0; > >> + > >> + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); > >> + if (!pd) > >> + goto out; > >> + > >> + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); > >> + if (!pd_provider) > >> + goto free_pd; > >> + > >> + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; > >> + > >> + /* Allow power off when OSI is available. */ > >> + if (sbi_cpuidle_use_osi) > >> + pd->power_off = sbi_cpuidle_pd_power_off; > >> + else > >> + pd->flags |= GENPD_FLAG_ALWAYS_ON; > >> + > >> + /* Use governor for CPU PM domains if it has some states to manage. */ > >> + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; > >> + > >> + ret = pm_genpd_init(pd, pd_gov, false); > >> + if (ret) > >> + goto free_pd_prov; > >> + > >> + ret = of_genpd_add_provider_simple(np, pd); > >> + if (ret) > >> + goto remove_pd; > >> + > >> + pd_provider->node = of_node_get(np); > >> + list_add(&pd_provider->link, &sbi_pd_providers); > >> + > >> + pr_debug("init PM domain %s\n", pd->name); > >> + return 0; > >> + > >> +remove_pd: > >> + pm_genpd_remove(pd); > >> +free_pd_prov: > >> + kfree(pd_provider); > >> +free_pd: > >> + dt_idle_pd_free(pd); > >> +out: > >> + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); > >> + return ret; > >> +} > >> + > >> +static void sbi_pd_remove(void) > >> +{ > >> + struct sbi_pd_provider *pd_provider, *it; > >> + struct generic_pm_domain *genpd; > >> + > >> + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { > >> + of_genpd_del_provider(pd_provider->node); > >> + > >> + genpd = of_genpd_remove_last(pd_provider->node); > >> + if (!IS_ERR(genpd)) > >> + kfree(genpd); > >> + > >> + of_node_put(pd_provider->node); > >> + list_del(&pd_provider->link); > >> + kfree(pd_provider); > >> + } > >> +} > >> + > >> +static int sbi_genpd_probe(struct device_node *np) > >> +{ > >> + struct device_node *node; > >> + int ret = 0, pd_count = 0; > >> + > >> + if (!np) > >> + return -ENODEV; > >> + > >> + /* > >> + * Parse child nodes for the "#power-domain-cells" property and > >> + * initialize a genpd/genpd-of-provider pair when it's found. > >> + */ > >> + for_each_child_of_node(np, node) { > >> + if (!of_find_property(node, "#power-domain-cells", NULL)) > >> + continue; > >> + > >> + ret = sbi_pd_init(node); > >> + if (ret) > >> + goto put_node; > >> + > >> + pd_count++; > >> + } > >> + > >> + /* Bail out if not using the hierarchical CPU topology. */ > >> + if (!pd_count) > >> + goto no_pd; > >> + > >> + /* Link genpd masters/subdomains to model the CPU topology. */ > >> + ret = dt_idle_pd_init_topology(np); > >> + if (ret) > >> + goto remove_pd; > >> + > >> + return 0; > >> + > >> +put_node: > >> + of_node_put(node); > >> +remove_pd: > >> + sbi_pd_remove(); > >> + pr_err("failed to create CPU PM domains ret=%d\n", ret); > >> +no_pd: > >> + return ret; > >> +} > >> + > >> +#else > >> + > >> +static inline int sbi_genpd_probe(struct device_node *np) > >> +{ > >> + return 0; > >> +} > >> + > >> +#endif > >> + > >> +static int sbi_cpuidle_probe(struct platform_device *pdev) > >> +{ > >> + int cpu, ret; > >> + struct cpuidle_driver *drv; > >> + struct cpuidle_device *dev; > >> + struct device_node *np, *pds_node; > >> + > >> + /* Detect OSI support based on CPU DT nodes */ > >> + sbi_cpuidle_use_osi = true; > >> + for_each_possible_cpu(cpu) { > >> + np = of_cpu_device_node_get(cpu); > >> + if (np && > >> + of_find_property(np, "power-domains", NULL) && > >> + of_find_property(np, "power-domain-names", NULL)) { > >> + continue; > >> + } else { > >> + sbi_cpuidle_use_osi = false; > >> + break; > >> + } > >> + } > >> + > >> + /* Populate generic power domains from DT nodes */ > >> + pds_node = of_find_node_by_path("/cpus/power-domains"); > >> + if (pds_node) { > >> + ret = sbi_genpd_probe(pds_node); > >> + of_node_put(pds_node); > >> + if (ret) > >> + return ret; > >> + } > >> + > >> + /* Initialize CPU idle driver for each CPU */ > >> + for_each_possible_cpu(cpu) { > >> + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); > >> + if (ret) { > >> + pr_debug("HART%ld: idle driver init failed\n", > >> + cpuid_to_hartid_map(cpu)); > >> + goto out_fail; > >> + } > >> + } > >> + > >> + /* Setup CPU hotplut notifiers */ > >> + sbi_idle_init_cpuhp(); > >> + > >> + pr_info("idle driver registered for all CPUs\n"); > >> + > >> + return 0; > >> + > >> +out_fail: > >> + while (--cpu >= 0) { > >> + dev = per_cpu(cpuidle_devices, cpu); > >> + drv = cpuidle_get_cpu_driver(dev); > >> + cpuidle_unregister(drv); > >> + sbi_cpuidle_deinit_cpu(cpu); > >> + } > >> + > >> + return ret; > >> +} > >> + > >> +static struct platform_driver sbi_cpuidle_driver = { > >> + .probe = sbi_cpuidle_probe, > >> + .driver = { > >> + .name = "sbi-cpuidle", > >> + .sync_state = sbi_cpuidle_domain_sync_state, > >> + }, > >> +}; > >> + > >> +static int __init sbi_cpuidle_init(void) > >> +{ > >> + int ret; > >> + struct platform_device *pdev; > >> + > >> + /* > >> + * The SBI HSM suspend function is only available when: > >> + * 1) SBI version is 0.3 or higher > >> + * 2) SBI HSM extension is available > >> + */ > >> + if ((sbi_spec_version < sbi_mk_version(0, 3)) || > >> + sbi_probe_extension(SBI_EXT_HSM) <= 0) { > >> + pr_info("HSM suspend not available\n"); > >> + return 0; > >> + } > >> + > >> + ret = platform_driver_register(&sbi_cpuidle_driver); > >> + if (ret) > >> + return ret; > >> + > >> + pdev = platform_device_register_simple("sbi-cpuidle", > >> + -1, NULL, 0); > >> + if (IS_ERR(pdev)) { > >> + platform_driver_unregister(&sbi_cpuidle_driver); > >> + return PTR_ERR(pdev); > >> + } > >> + > >> + return 0; > >> +} > >> +device_initcall(sbi_cpuidle_init); > >> -- > >> 2.25.1 > >> > > > > For the SBI part, > > Acked-by: Atish Patra <atishp@rivosinc.com> > > > > FYI.. > > SBI HSM suspend was included in SBI v0.3. The current version of the > > SBI specification (v1.0-rc2) > > is already frozen as per the RVI guidelines. All the comments received > > during the public review period > > have been addressed as well. > > Yet not all comments from *before* the public review period. > I guess you are talking about the following issue, https://github.com/riscv-non-isa/riscv-sbi-doc/issues/82 The issues raised here concern only the legacy version(v0.1) which is disabled from the kernel in the latest release. I have left detailed comments on why no changes to the spec is necessary. > Jess >
On Wed, 09 Feb 2022 21:49:45 PST (-0800), apatel@ventanamicro.com wrote: > From: Anup Patel <anup.patel@wdc.com> > > The RISC-V SBI HSM extension provides HSM suspend call which can > be used by Linux RISC-V to enter platform specific low-power state. > > This patch adds a CPU idle driver based on RISC-V SBI calls which > will populate idle states from device tree and use SBI calls to > entry these idle states. This generally looks OK to me. I'm happy to take it via the RISC-V tree, but I usually like to have at least an Ack from the subsystem maintainer before doing so. I see some of the other patches got reviewed, not sure if you guys have issue with it or if it just slipped through the cracks. Atish has confirmed the spec is frozen <https://lore.kernel.org/lkml/CAOnJCUKmwk=VbwCtkjS_rxArMWhVExeRp4QkkjDUmcvJ69Bqqg@mail.gmail.com/>, not sure if that's what folks were waiting for. I've put the whole set on palmer/riscv-idle, there's one merge conflict with my current for-next diff --cc arch/riscv/kernel/head.S index ec07f991866a,893b8bb69391..000000000000 --- a/arch/riscv/kernel/head.S +++ b/arch/riscv/kernel/head.S diff --git a/arch/riscv/include/asm/asm.h b/arch/riscv/include/asm/asm.h index 48b4baa4d706..7b7ddfaaf671 100644 --- a/arch/riscv/include/asm/asm.h +++ b/arch/riscv/include/asm/asm.h @@ -85,6 +85,7 @@ sub \reg, \reg, t0 .endm _xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET +_xip_phys_offset: .dword CONFIG_XIP_PHYS_ADDR + XIP_OFFSET #else .macro XIP_FIXUP_OFFSET reg .endm with that the series is passing my tests, though I don't have anything specific for suspend yet. I'll hold off on this until I get back around to my own message, to give the PM folks a chance to look if they want to. Thanks! > > Signed-off-by: Anup Patel <anup.patel@wdc.com> > Signed-off-by: Anup Patel <apatel@ventanamicro.com> > --- > MAINTAINERS | 7 + > drivers/cpuidle/Kconfig | 5 + > drivers/cpuidle/Kconfig.riscv | 15 + > drivers/cpuidle/Makefile | 4 + > drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++ > 5 files changed, 658 insertions(+) > create mode 100644 drivers/cpuidle/Kconfig.riscv > create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 39ece23e8d93..2ff0055a26a7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5058,6 +5058,13 @@ S: Supported > F: drivers/cpuidle/dt_idle_genpd.c > F: drivers/cpuidle/dt_idle_genpd.h > > +CPUIDLE DRIVER - RISC-V SBI > +M: Anup Patel <anup@brainfault.org> > +L: linux-pm@vger.kernel.org > +L: linux-riscv@lists.infradead.org > +S: Maintained > +F: drivers/cpuidle/cpuidle-riscv-sbi.c > + > CRAMFS FILESYSTEM > M: Nicolas Pitre <nico@fluxnic.net> > S: Maintained > diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig > index f1afe7ab6b54..ff71dd662880 100644 > --- a/drivers/cpuidle/Kconfig > +++ b/drivers/cpuidle/Kconfig > @@ -66,6 +66,11 @@ depends on PPC > source "drivers/cpuidle/Kconfig.powerpc" > endmenu > > +menu "RISC-V CPU Idle Drivers" > +depends on RISCV > +source "drivers/cpuidle/Kconfig.riscv" > +endmenu > + > config HALTPOLL_CPUIDLE > tristate "Halt poll cpuidle driver" > depends on X86 && KVM_GUEST > diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv > new file mode 100644 > index 000000000000..78518c26af74 > --- /dev/null > +++ b/drivers/cpuidle/Kconfig.riscv > @@ -0,0 +1,15 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# RISC-V CPU Idle drivers > +# > + > +config RISCV_SBI_CPUIDLE > + bool "RISC-V SBI CPU idle Driver" > + depends on RISCV_SBI > + select DT_IDLE_STATES > + select CPU_IDLE_MULTIPLE_DRIVERS > + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF > + help > + Select this option to enable RISC-V SBI firmware based CPU idle > + driver for RISC-V systems. This drivers also supports hierarchical > + DT based layout of the idle state. > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile > index 11a26cef279f..d103342b7cfc 100644 > --- a/drivers/cpuidle/Makefile > +++ b/drivers/cpuidle/Makefile > @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o > # POWERPC drivers > obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o > obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o > + > +############################################################################### > +# RISC-V drivers > +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o > diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c > new file mode 100644 > index 000000000000..b459eda2cd37 > --- /dev/null > +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c > @@ -0,0 +1,627 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * RISC-V SBI CPU idle driver. > + * > + * Copyright (c) 2021 Western Digital Corporation or its affiliates. > + * Copyright (c) 2022 Ventana Micro Systems Inc. > + */ > + > +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt > + > +#include <linux/cpuidle.h> > +#include <linux/cpumask.h> > +#include <linux/cpu_pm.h> > +#include <linux/cpu_cooling.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > +#include <linux/pm_domain.h> > +#include <linux/pm_runtime.h> > +#include <asm/cpuidle.h> > +#include <asm/sbi.h> > +#include <asm/suspend.h> > + > +#include "dt_idle_states.h" > +#include "dt_idle_genpd.h" > + > +struct sbi_cpuidle_data { > + u32 *states; > + struct device *dev; > +}; > + > +struct sbi_domain_state { > + bool available; > + u32 state; > +}; > + > +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); > +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); > +static bool sbi_cpuidle_use_osi; > +static bool sbi_cpuidle_use_cpuhp; > +static bool sbi_cpuidle_pd_allow_domain_state; > + > +static inline void sbi_set_domain_state(u32 state) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = true; > + data->state = state; > +} > + > +static inline u32 sbi_get_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->state; > +} > + > +static inline void sbi_clear_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = false; > +} > + > +static inline bool sbi_is_domain_state_available(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->available; > +} > + > +static int sbi_suspend_finisher(unsigned long suspend_type, > + unsigned long resume_addr, > + unsigned long opaque) > +{ > + struct sbiret ret; > + > + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, > + suspend_type, resume_addr, opaque, 0, 0, 0); > + > + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; > +} > + > +static int sbi_suspend(u32 state) > +{ > + if (state & SBI_HSM_SUSP_NON_RET_BIT) > + return cpu_suspend(state, sbi_suspend_finisher); > + else > + return sbi_suspend_finisher(state, 0, 0); > +} > + > +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); > + > + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); > +} > + > +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx, > + bool s2idle) > +{ > + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); > + u32 *states = data->states; > + struct device *pd_dev = data->dev; > + u32 state; > + int ret; > + > + ret = cpu_pm_enter(); > + if (ret) > + return -1; > + > + /* Do runtime PM to manage a hierarchical CPU toplogy. */ > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_suspend(pd_dev); > + else > + pm_runtime_put_sync_suspend(pd_dev); > + rcu_irq_exit_irqson(); > + > + if (sbi_is_domain_state_available()) > + state = sbi_get_domain_state(); > + else > + state = states[idx]; > + > + ret = sbi_suspend(state) ? -1 : idx; > + > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_resume(pd_dev); > + else > + pm_runtime_get_sync(pd_dev); > + rcu_irq_exit_irqson(); > + > + cpu_pm_exit(); > + > + /* Clear the domain state to start fresh when back from idle. */ > + sbi_clear_domain_state(); > + return ret; > +} > + > +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, false); > +} > + > +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, > + int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, true); > +} > + > +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) > + pm_runtime_get_sync(pd_dev); > + > + return 0; > +} > + > +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) { > + pm_runtime_put_sync(pd_dev); > + /* Clear domain state to start fresh at next online. */ > + sbi_clear_domain_state(); > + } > + > + return 0; > +} > + > +static void sbi_idle_init_cpuhp(void) > +{ > + int err; > + > + if (!sbi_cpuidle_use_cpuhp) > + return; > + > + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, > + "cpuidle/sbi:online", > + sbi_cpuidle_cpuhp_up, > + sbi_cpuidle_cpuhp_down); > + if (err) > + pr_warn("Failed %d while setup cpuhp state\n", err); > +} > + > +static const struct of_device_id sbi_cpuidle_state_match[] = { > + { .compatible = "riscv,idle-state", > + .data = sbi_cpuidle_enter_state }, > + { }, > +}; > + > +static bool sbi_suspend_state_is_valid(u32 state) > +{ > + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_RET_PLATFORM) > + return false; > + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) > + return false; > + return true; > +} > + > +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) > +{ > + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); > + > + if (err) { > + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); > + return err; > + } > + > + if (!sbi_suspend_state_is_valid(*state)) { > + pr_warn("Invalid SBI suspend state %#x\n", *state); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, > + struct sbi_cpuidle_data *data, > + unsigned int state_count, int cpu) > +{ > + /* Currently limit the hierarchical topology to be used in OSI mode. */ > + if (!sbi_cpuidle_use_osi) > + return 0; > + > + data->dev = dt_idle_attach_cpu(cpu, "sbi"); > + if (IS_ERR_OR_NULL(data->dev)) > + return PTR_ERR_OR_ZERO(data->dev); > + > + /* > + * Using the deepest state for the CPU to trigger a potential selection > + * of a shared state for the domain, assumes the domain states are all > + * deeper states. > + */ > + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; > + drv->states[state_count - 1].enter_s2idle = > + sbi_enter_s2idle_domain_idle_state; > + sbi_cpuidle_use_cpuhp = true; > + > + return 0; > +} > + > +static int sbi_cpuidle_dt_init_states(struct device *dev, > + struct cpuidle_driver *drv, > + unsigned int cpu, > + unsigned int state_count) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + struct device_node *state_node; > + struct device_node *cpu_node; > + u32 *states; > + int i, ret; > + > + cpu_node = of_cpu_device_node_get(cpu); > + if (!cpu_node) > + return -ENODEV; > + > + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); > + if (!states) { > + ret = -ENOMEM; > + goto fail; > + } > + > + /* Parse SBI specific details from state DT nodes */ > + for (i = 1; i < state_count; i++) { > + state_node = of_get_cpu_state_node(cpu_node, i - 1); > + if (!state_node) > + break; > + > + ret = sbi_dt_parse_state_node(state_node, &states[i]); > + of_node_put(state_node); > + > + if (ret) > + return ret; > + > + pr_debug("sbi-state %#x index %d\n", states[i], i); > + } > + if (i != state_count) { > + ret = -ENODEV; > + goto fail; > + } > + > + /* Initialize optional data, used for the hierarchical topology. */ > + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); > + if (ret < 0) > + return ret; > + > + /* Store states in the per-cpu struct. */ > + data->states = states; > + > +fail: > + of_node_put(cpu_node); > + > + return ret; > +} > + > +static void sbi_cpuidle_deinit_cpu(int cpu) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + > + dt_idle_detach_cpu(data->dev); > + sbi_cpuidle_use_cpuhp = false; > +} > + > +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) > +{ > + struct cpuidle_driver *drv; > + unsigned int state_count = 0; > + int ret = 0; > + > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > + if (!drv) > + return -ENOMEM; > + > + drv->name = "sbi_cpuidle"; > + drv->owner = THIS_MODULE; > + drv->cpumask = (struct cpumask *)cpumask_of(cpu); > + > + /* RISC-V architectural WFI to be represented as state index 0. */ > + drv->states[0].enter = sbi_cpuidle_enter_state; > + drv->states[0].exit_latency = 1; > + drv->states[0].target_residency = 1; > + drv->states[0].power_usage = UINT_MAX; > + strcpy(drv->states[0].name, "WFI"); > + strcpy(drv->states[0].desc, "RISC-V WFI"); > + > + /* > + * If no DT idle states are detected (ret == 0) let the driver > + * initialization fail accordingly since there is no reason to > + * initialize the idle driver if only wfi is supported, the > + * default archictectural back-end already executes wfi > + * on idle entry. > + */ > + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); > + if (ret <= 0) { > + pr_debug("HART%ld: failed to parse DT idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret ? : -ENODEV; > + } > + state_count = ret + 1; /* Include WFI state as well */ > + > + /* Initialize idle states from DT. */ > + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); > + if (ret) { > + pr_err("HART%ld: failed to init idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret; > + } > + > + ret = cpuidle_register(drv, NULL); > + if (ret) > + goto deinit; > + > + cpuidle_cooling_register(drv); > + > + return 0; > +deinit: > + sbi_cpuidle_deinit_cpu(cpu); > + return ret; > +} > + > +static void sbi_cpuidle_domain_sync_state(struct device *dev) > +{ > + /* > + * All devices have now been attached/probed to the PM domain > + * topology, hence it's fine to allow domain states to be picked. > + */ > + sbi_cpuidle_pd_allow_domain_state = true; > +} > + > +#ifdef CONFIG_DT_IDLE_GENPD > + > +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) > +{ > + struct genpd_power_state *state = &pd->states[pd->state_idx]; > + u32 *pd_state; > + > + if (!state->data) > + return 0; > + > + if (!sbi_cpuidle_pd_allow_domain_state) > + return -EBUSY; > + > + /* OSI mode is enabled, set the corresponding domain state. */ > + pd_state = state->data; > + sbi_set_domain_state(*pd_state); > + > + return 0; > +} > + > +struct sbi_pd_provider { > + struct list_head link; > + struct device_node *node; > +}; > + > +static LIST_HEAD(sbi_pd_providers); > + > +static int sbi_pd_init(struct device_node *np) > +{ > + struct generic_pm_domain *pd; > + struct sbi_pd_provider *pd_provider; > + struct dev_power_governor *pd_gov; > + int ret = -ENOMEM, state_count = 0; > + > + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); > + if (!pd) > + goto out; > + > + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); > + if (!pd_provider) > + goto free_pd; > + > + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; > + > + /* Allow power off when OSI is available. */ > + if (sbi_cpuidle_use_osi) > + pd->power_off = sbi_cpuidle_pd_power_off; > + else > + pd->flags |= GENPD_FLAG_ALWAYS_ON; > + > + /* Use governor for CPU PM domains if it has some states to manage. */ > + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; > + > + ret = pm_genpd_init(pd, pd_gov, false); > + if (ret) > + goto free_pd_prov; > + > + ret = of_genpd_add_provider_simple(np, pd); > + if (ret) > + goto remove_pd; > + > + pd_provider->node = of_node_get(np); > + list_add(&pd_provider->link, &sbi_pd_providers); > + > + pr_debug("init PM domain %s\n", pd->name); > + return 0; > + > +remove_pd: > + pm_genpd_remove(pd); > +free_pd_prov: > + kfree(pd_provider); > +free_pd: > + dt_idle_pd_free(pd); > +out: > + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); > + return ret; > +} > + > +static void sbi_pd_remove(void) > +{ > + struct sbi_pd_provider *pd_provider, *it; > + struct generic_pm_domain *genpd; > + > + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { > + of_genpd_del_provider(pd_provider->node); > + > + genpd = of_genpd_remove_last(pd_provider->node); > + if (!IS_ERR(genpd)) > + kfree(genpd); > + > + of_node_put(pd_provider->node); > + list_del(&pd_provider->link); > + kfree(pd_provider); > + } > +} > + > +static int sbi_genpd_probe(struct device_node *np) > +{ > + struct device_node *node; > + int ret = 0, pd_count = 0; > + > + if (!np) > + return -ENODEV; > + > + /* > + * Parse child nodes for the "#power-domain-cells" property and > + * initialize a genpd/genpd-of-provider pair when it's found. > + */ > + for_each_child_of_node(np, node) { > + if (!of_find_property(node, "#power-domain-cells", NULL)) > + continue; > + > + ret = sbi_pd_init(node); > + if (ret) > + goto put_node; > + > + pd_count++; > + } > + > + /* Bail out if not using the hierarchical CPU topology. */ > + if (!pd_count) > + goto no_pd; > + > + /* Link genpd masters/subdomains to model the CPU topology. */ > + ret = dt_idle_pd_init_topology(np); > + if (ret) > + goto remove_pd; > + > + return 0; > + > +put_node: > + of_node_put(node); > +remove_pd: > + sbi_pd_remove(); > + pr_err("failed to create CPU PM domains ret=%d\n", ret); > +no_pd: > + return ret; > +} > + > +#else > + > +static inline int sbi_genpd_probe(struct device_node *np) > +{ > + return 0; > +} > + > +#endif > + > +static int sbi_cpuidle_probe(struct platform_device *pdev) > +{ > + int cpu, ret; > + struct cpuidle_driver *drv; > + struct cpuidle_device *dev; > + struct device_node *np, *pds_node; > + > + /* Detect OSI support based on CPU DT nodes */ > + sbi_cpuidle_use_osi = true; > + for_each_possible_cpu(cpu) { > + np = of_cpu_device_node_get(cpu); > + if (np && > + of_find_property(np, "power-domains", NULL) && > + of_find_property(np, "power-domain-names", NULL)) { > + continue; > + } else { > + sbi_cpuidle_use_osi = false; > + break; > + } > + } > + > + /* Populate generic power domains from DT nodes */ > + pds_node = of_find_node_by_path("/cpus/power-domains"); > + if (pds_node) { > + ret = sbi_genpd_probe(pds_node); > + of_node_put(pds_node); > + if (ret) > + return ret; > + } > + > + /* Initialize CPU idle driver for each CPU */ > + for_each_possible_cpu(cpu) { > + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); > + if (ret) { > + pr_debug("HART%ld: idle driver init failed\n", > + cpuid_to_hartid_map(cpu)); > + goto out_fail; > + } > + } > + > + /* Setup CPU hotplut notifiers */ > + sbi_idle_init_cpuhp(); > + > + pr_info("idle driver registered for all CPUs\n"); > + > + return 0; > + > +out_fail: > + while (--cpu >= 0) { > + dev = per_cpu(cpuidle_devices, cpu); > + drv = cpuidle_get_cpu_driver(dev); > + cpuidle_unregister(drv); > + sbi_cpuidle_deinit_cpu(cpu); > + } > + > + return ret; > +} > + > +static struct platform_driver sbi_cpuidle_driver = { > + .probe = sbi_cpuidle_probe, > + .driver = { > + .name = "sbi-cpuidle", > + .sync_state = sbi_cpuidle_domain_sync_state, > + }, > +}; > + > +static int __init sbi_cpuidle_init(void) > +{ > + int ret; > + struct platform_device *pdev; > + > + /* > + * The SBI HSM suspend function is only available when: > + * 1) SBI version is 0.3 or higher > + * 2) SBI HSM extension is available > + */ > + if ((sbi_spec_version < sbi_mk_version(0, 3)) || > + sbi_probe_extension(SBI_EXT_HSM) <= 0) { > + pr_info("HSM suspend not available\n"); > + return 0; > + } > + > + ret = platform_driver_register(&sbi_cpuidle_driver); > + if (ret) > + return ret; > + > + pdev = platform_device_register_simple("sbi-cpuidle", > + -1, NULL, 0); > + if (IS_ERR(pdev)) { > + platform_driver_unregister(&sbi_cpuidle_driver); > + return PTR_ERR(pdev); > + } > + > + return 0; > +} > +device_initcall(sbi_cpuidle_init);
Hi Rafael, On Thu, Feb 10, 2022 at 11:21 AM Anup Patel <apatel@ventanamicro.com> wrote: > > From: Anup Patel <anup.patel@wdc.com> > > The RISC-V SBI HSM extension provides HSM suspend call which can > be used by Linux RISC-V to enter platform specific low-power state. > > This patch adds a CPU idle driver based on RISC-V SBI calls which > will populate idle states from device tree and use SBI calls to > entry these idle states. > > Signed-off-by: Anup Patel <anup.patel@wdc.com> > Signed-off-by: Anup Patel <apatel@ventanamicro.com> Does this driver look okay to you ? Best Regards, Anup Patel > --- > MAINTAINERS | 7 + > drivers/cpuidle/Kconfig | 5 + > drivers/cpuidle/Kconfig.riscv | 15 + > drivers/cpuidle/Makefile | 4 + > drivers/cpuidle/cpuidle-riscv-sbi.c | 627 ++++++++++++++++++++++++++++ > 5 files changed, 658 insertions(+) > create mode 100644 drivers/cpuidle/Kconfig.riscv > create mode 100644 drivers/cpuidle/cpuidle-riscv-sbi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 39ece23e8d93..2ff0055a26a7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5058,6 +5058,13 @@ S: Supported > F: drivers/cpuidle/dt_idle_genpd.c > F: drivers/cpuidle/dt_idle_genpd.h > > +CPUIDLE DRIVER - RISC-V SBI > +M: Anup Patel <anup@brainfault.org> > +L: linux-pm@vger.kernel.org > +L: linux-riscv@lists.infradead.org > +S: Maintained > +F: drivers/cpuidle/cpuidle-riscv-sbi.c > + > CRAMFS FILESYSTEM > M: Nicolas Pitre <nico@fluxnic.net> > S: Maintained > diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig > index f1afe7ab6b54..ff71dd662880 100644 > --- a/drivers/cpuidle/Kconfig > +++ b/drivers/cpuidle/Kconfig > @@ -66,6 +66,11 @@ depends on PPC > source "drivers/cpuidle/Kconfig.powerpc" > endmenu > > +menu "RISC-V CPU Idle Drivers" > +depends on RISCV > +source "drivers/cpuidle/Kconfig.riscv" > +endmenu > + > config HALTPOLL_CPUIDLE > tristate "Halt poll cpuidle driver" > depends on X86 && KVM_GUEST > diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv > new file mode 100644 > index 000000000000..78518c26af74 > --- /dev/null > +++ b/drivers/cpuidle/Kconfig.riscv > @@ -0,0 +1,15 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# RISC-V CPU Idle drivers > +# > + > +config RISCV_SBI_CPUIDLE > + bool "RISC-V SBI CPU idle Driver" > + depends on RISCV_SBI > + select DT_IDLE_STATES > + select CPU_IDLE_MULTIPLE_DRIVERS > + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF > + help > + Select this option to enable RISC-V SBI firmware based CPU idle > + driver for RISC-V systems. This drivers also supports hierarchical > + DT based layout of the idle state. > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile > index 11a26cef279f..d103342b7cfc 100644 > --- a/drivers/cpuidle/Makefile > +++ b/drivers/cpuidle/Makefile > @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o > # POWERPC drivers > obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o > obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o > + > +############################################################################### > +# RISC-V drivers > +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o > diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c > new file mode 100644 > index 000000000000..b459eda2cd37 > --- /dev/null > +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c > @@ -0,0 +1,627 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * RISC-V SBI CPU idle driver. > + * > + * Copyright (c) 2021 Western Digital Corporation or its affiliates. > + * Copyright (c) 2022 Ventana Micro Systems Inc. > + */ > + > +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt > + > +#include <linux/cpuidle.h> > +#include <linux/cpumask.h> > +#include <linux/cpu_pm.h> > +#include <linux/cpu_cooling.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > +#include <linux/pm_domain.h> > +#include <linux/pm_runtime.h> > +#include <asm/cpuidle.h> > +#include <asm/sbi.h> > +#include <asm/suspend.h> > + > +#include "dt_idle_states.h" > +#include "dt_idle_genpd.h" > + > +struct sbi_cpuidle_data { > + u32 *states; > + struct device *dev; > +}; > + > +struct sbi_domain_state { > + bool available; > + u32 state; > +}; > + > +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); > +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); > +static bool sbi_cpuidle_use_osi; > +static bool sbi_cpuidle_use_cpuhp; > +static bool sbi_cpuidle_pd_allow_domain_state; > + > +static inline void sbi_set_domain_state(u32 state) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = true; > + data->state = state; > +} > + > +static inline u32 sbi_get_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->state; > +} > + > +static inline void sbi_clear_domain_state(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + data->available = false; > +} > + > +static inline bool sbi_is_domain_state_available(void) > +{ > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); > + > + return data->available; > +} > + > +static int sbi_suspend_finisher(unsigned long suspend_type, > + unsigned long resume_addr, > + unsigned long opaque) > +{ > + struct sbiret ret; > + > + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, > + suspend_type, resume_addr, opaque, 0, 0, 0); > + > + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; > +} > + > +static int sbi_suspend(u32 state) > +{ > + if (state & SBI_HSM_SUSP_NON_RET_BIT) > + return cpu_suspend(state, sbi_suspend_finisher); > + else > + return sbi_suspend_finisher(state, 0, 0); > +} > + > +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); > + > + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); > +} > + > +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx, > + bool s2idle) > +{ > + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); > + u32 *states = data->states; > + struct device *pd_dev = data->dev; > + u32 state; > + int ret; > + > + ret = cpu_pm_enter(); > + if (ret) > + return -1; > + > + /* Do runtime PM to manage a hierarchical CPU toplogy. */ > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_suspend(pd_dev); > + else > + pm_runtime_put_sync_suspend(pd_dev); > + rcu_irq_exit_irqson(); > + > + if (sbi_is_domain_state_available()) > + state = sbi_get_domain_state(); > + else > + state = states[idx]; > + > + ret = sbi_suspend(state) ? -1 : idx; > + > + rcu_irq_enter_irqson(); > + if (s2idle) > + dev_pm_genpd_resume(pd_dev); > + else > + pm_runtime_get_sync(pd_dev); > + rcu_irq_exit_irqson(); > + > + cpu_pm_exit(); > + > + /* Clear the domain state to start fresh when back from idle. */ > + sbi_clear_domain_state(); > + return ret; > +} > + > +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, false); > +} > + > +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, > + int idx) > +{ > + return __sbi_enter_domain_idle_state(dev, drv, idx, true); > +} > + > +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) > + pm_runtime_get_sync(pd_dev); > + > + return 0; > +} > + > +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) > +{ > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); > + > + if (pd_dev) { > + pm_runtime_put_sync(pd_dev); > + /* Clear domain state to start fresh at next online. */ > + sbi_clear_domain_state(); > + } > + > + return 0; > +} > + > +static void sbi_idle_init_cpuhp(void) > +{ > + int err; > + > + if (!sbi_cpuidle_use_cpuhp) > + return; > + > + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, > + "cpuidle/sbi:online", > + sbi_cpuidle_cpuhp_up, > + sbi_cpuidle_cpuhp_down); > + if (err) > + pr_warn("Failed %d while setup cpuhp state\n", err); > +} > + > +static const struct of_device_id sbi_cpuidle_state_match[] = { > + { .compatible = "riscv,idle-state", > + .data = sbi_cpuidle_enter_state }, > + { }, > +}; > + > +static bool sbi_suspend_state_is_valid(u32 state) > +{ > + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_RET_PLATFORM) > + return false; > + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && > + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) > + return false; > + return true; > +} > + > +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) > +{ > + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); > + > + if (err) { > + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); > + return err; > + } > + > + if (!sbi_suspend_state_is_valid(*state)) { > + pr_warn("Invalid SBI suspend state %#x\n", *state); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, > + struct sbi_cpuidle_data *data, > + unsigned int state_count, int cpu) > +{ > + /* Currently limit the hierarchical topology to be used in OSI mode. */ > + if (!sbi_cpuidle_use_osi) > + return 0; > + > + data->dev = dt_idle_attach_cpu(cpu, "sbi"); > + if (IS_ERR_OR_NULL(data->dev)) > + return PTR_ERR_OR_ZERO(data->dev); > + > + /* > + * Using the deepest state for the CPU to trigger a potential selection > + * of a shared state for the domain, assumes the domain states are all > + * deeper states. > + */ > + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; > + drv->states[state_count - 1].enter_s2idle = > + sbi_enter_s2idle_domain_idle_state; > + sbi_cpuidle_use_cpuhp = true; > + > + return 0; > +} > + > +static int sbi_cpuidle_dt_init_states(struct device *dev, > + struct cpuidle_driver *drv, > + unsigned int cpu, > + unsigned int state_count) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + struct device_node *state_node; > + struct device_node *cpu_node; > + u32 *states; > + int i, ret; > + > + cpu_node = of_cpu_device_node_get(cpu); > + if (!cpu_node) > + return -ENODEV; > + > + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); > + if (!states) { > + ret = -ENOMEM; > + goto fail; > + } > + > + /* Parse SBI specific details from state DT nodes */ > + for (i = 1; i < state_count; i++) { > + state_node = of_get_cpu_state_node(cpu_node, i - 1); > + if (!state_node) > + break; > + > + ret = sbi_dt_parse_state_node(state_node, &states[i]); > + of_node_put(state_node); > + > + if (ret) > + return ret; > + > + pr_debug("sbi-state %#x index %d\n", states[i], i); > + } > + if (i != state_count) { > + ret = -ENODEV; > + goto fail; > + } > + > + /* Initialize optional data, used for the hierarchical topology. */ > + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); > + if (ret < 0) > + return ret; > + > + /* Store states in the per-cpu struct. */ > + data->states = states; > + > +fail: > + of_node_put(cpu_node); > + > + return ret; > +} > + > +static void sbi_cpuidle_deinit_cpu(int cpu) > +{ > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); > + > + dt_idle_detach_cpu(data->dev); > + sbi_cpuidle_use_cpuhp = false; > +} > + > +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) > +{ > + struct cpuidle_driver *drv; > + unsigned int state_count = 0; > + int ret = 0; > + > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > + if (!drv) > + return -ENOMEM; > + > + drv->name = "sbi_cpuidle"; > + drv->owner = THIS_MODULE; > + drv->cpumask = (struct cpumask *)cpumask_of(cpu); > + > + /* RISC-V architectural WFI to be represented as state index 0. */ > + drv->states[0].enter = sbi_cpuidle_enter_state; > + drv->states[0].exit_latency = 1; > + drv->states[0].target_residency = 1; > + drv->states[0].power_usage = UINT_MAX; > + strcpy(drv->states[0].name, "WFI"); > + strcpy(drv->states[0].desc, "RISC-V WFI"); > + > + /* > + * If no DT idle states are detected (ret == 0) let the driver > + * initialization fail accordingly since there is no reason to > + * initialize the idle driver if only wfi is supported, the > + * default archictectural back-end already executes wfi > + * on idle entry. > + */ > + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); > + if (ret <= 0) { > + pr_debug("HART%ld: failed to parse DT idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret ? : -ENODEV; > + } > + state_count = ret + 1; /* Include WFI state as well */ > + > + /* Initialize idle states from DT. */ > + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); > + if (ret) { > + pr_err("HART%ld: failed to init idle states\n", > + cpuid_to_hartid_map(cpu)); > + return ret; > + } > + > + ret = cpuidle_register(drv, NULL); > + if (ret) > + goto deinit; > + > + cpuidle_cooling_register(drv); > + > + return 0; > +deinit: > + sbi_cpuidle_deinit_cpu(cpu); > + return ret; > +} > + > +static void sbi_cpuidle_domain_sync_state(struct device *dev) > +{ > + /* > + * All devices have now been attached/probed to the PM domain > + * topology, hence it's fine to allow domain states to be picked. > + */ > + sbi_cpuidle_pd_allow_domain_state = true; > +} > + > +#ifdef CONFIG_DT_IDLE_GENPD > + > +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) > +{ > + struct genpd_power_state *state = &pd->states[pd->state_idx]; > + u32 *pd_state; > + > + if (!state->data) > + return 0; > + > + if (!sbi_cpuidle_pd_allow_domain_state) > + return -EBUSY; > + > + /* OSI mode is enabled, set the corresponding domain state. */ > + pd_state = state->data; > + sbi_set_domain_state(*pd_state); > + > + return 0; > +} > + > +struct sbi_pd_provider { > + struct list_head link; > + struct device_node *node; > +}; > + > +static LIST_HEAD(sbi_pd_providers); > + > +static int sbi_pd_init(struct device_node *np) > +{ > + struct generic_pm_domain *pd; > + struct sbi_pd_provider *pd_provider; > + struct dev_power_governor *pd_gov; > + int ret = -ENOMEM, state_count = 0; > + > + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); > + if (!pd) > + goto out; > + > + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); > + if (!pd_provider) > + goto free_pd; > + > + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; > + > + /* Allow power off when OSI is available. */ > + if (sbi_cpuidle_use_osi) > + pd->power_off = sbi_cpuidle_pd_power_off; > + else > + pd->flags |= GENPD_FLAG_ALWAYS_ON; > + > + /* Use governor for CPU PM domains if it has some states to manage. */ > + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; > + > + ret = pm_genpd_init(pd, pd_gov, false); > + if (ret) > + goto free_pd_prov; > + > + ret = of_genpd_add_provider_simple(np, pd); > + if (ret) > + goto remove_pd; > + > + pd_provider->node = of_node_get(np); > + list_add(&pd_provider->link, &sbi_pd_providers); > + > + pr_debug("init PM domain %s\n", pd->name); > + return 0; > + > +remove_pd: > + pm_genpd_remove(pd); > +free_pd_prov: > + kfree(pd_provider); > +free_pd: > + dt_idle_pd_free(pd); > +out: > + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); > + return ret; > +} > + > +static void sbi_pd_remove(void) > +{ > + struct sbi_pd_provider *pd_provider, *it; > + struct generic_pm_domain *genpd; > + > + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { > + of_genpd_del_provider(pd_provider->node); > + > + genpd = of_genpd_remove_last(pd_provider->node); > + if (!IS_ERR(genpd)) > + kfree(genpd); > + > + of_node_put(pd_provider->node); > + list_del(&pd_provider->link); > + kfree(pd_provider); > + } > +} > + > +static int sbi_genpd_probe(struct device_node *np) > +{ > + struct device_node *node; > + int ret = 0, pd_count = 0; > + > + if (!np) > + return -ENODEV; > + > + /* > + * Parse child nodes for the "#power-domain-cells" property and > + * initialize a genpd/genpd-of-provider pair when it's found. > + */ > + for_each_child_of_node(np, node) { > + if (!of_find_property(node, "#power-domain-cells", NULL)) > + continue; > + > + ret = sbi_pd_init(node); > + if (ret) > + goto put_node; > + > + pd_count++; > + } > + > + /* Bail out if not using the hierarchical CPU topology. */ > + if (!pd_count) > + goto no_pd; > + > + /* Link genpd masters/subdomains to model the CPU topology. */ > + ret = dt_idle_pd_init_topology(np); > + if (ret) > + goto remove_pd; > + > + return 0; > + > +put_node: > + of_node_put(node); > +remove_pd: > + sbi_pd_remove(); > + pr_err("failed to create CPU PM domains ret=%d\n", ret); > +no_pd: > + return ret; > +} > + > +#else > + > +static inline int sbi_genpd_probe(struct device_node *np) > +{ > + return 0; > +} > + > +#endif > + > +static int sbi_cpuidle_probe(struct platform_device *pdev) > +{ > + int cpu, ret; > + struct cpuidle_driver *drv; > + struct cpuidle_device *dev; > + struct device_node *np, *pds_node; > + > + /* Detect OSI support based on CPU DT nodes */ > + sbi_cpuidle_use_osi = true; > + for_each_possible_cpu(cpu) { > + np = of_cpu_device_node_get(cpu); > + if (np && > + of_find_property(np, "power-domains", NULL) && > + of_find_property(np, "power-domain-names", NULL)) { > + continue; > + } else { > + sbi_cpuidle_use_osi = false; > + break; > + } > + } > + > + /* Populate generic power domains from DT nodes */ > + pds_node = of_find_node_by_path("/cpus/power-domains"); > + if (pds_node) { > + ret = sbi_genpd_probe(pds_node); > + of_node_put(pds_node); > + if (ret) > + return ret; > + } > + > + /* Initialize CPU idle driver for each CPU */ > + for_each_possible_cpu(cpu) { > + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); > + if (ret) { > + pr_debug("HART%ld: idle driver init failed\n", > + cpuid_to_hartid_map(cpu)); > + goto out_fail; > + } > + } > + > + /* Setup CPU hotplut notifiers */ > + sbi_idle_init_cpuhp(); > + > + pr_info("idle driver registered for all CPUs\n"); > + > + return 0; > + > +out_fail: > + while (--cpu >= 0) { > + dev = per_cpu(cpuidle_devices, cpu); > + drv = cpuidle_get_cpu_driver(dev); > + cpuidle_unregister(drv); > + sbi_cpuidle_deinit_cpu(cpu); > + } > + > + return ret; > +} > + > +static struct platform_driver sbi_cpuidle_driver = { > + .probe = sbi_cpuidle_probe, > + .driver = { > + .name = "sbi-cpuidle", > + .sync_state = sbi_cpuidle_domain_sync_state, > + }, > +}; > + > +static int __init sbi_cpuidle_init(void) > +{ > + int ret; > + struct platform_device *pdev; > + > + /* > + * The SBI HSM suspend function is only available when: > + * 1) SBI version is 0.3 or higher > + * 2) SBI HSM extension is available > + */ > + if ((sbi_spec_version < sbi_mk_version(0, 3)) || > + sbi_probe_extension(SBI_EXT_HSM) <= 0) { > + pr_info("HSM suspend not available\n"); > + return 0; > + } > + > + ret = platform_driver_register(&sbi_cpuidle_driver); > + if (ret) > + return ret; > + > + pdev = platform_device_register_simple("sbi-cpuidle", > + -1, NULL, 0); > + if (IS_ERR(pdev)) { > + platform_driver_unregister(&sbi_cpuidle_driver); > + return PTR_ERR(pdev); > + } > + > + return 0; > +} > +device_initcall(sbi_cpuidle_init); > -- > 2.25.1 >
diff --git a/MAINTAINERS b/MAINTAINERS index 39ece23e8d93..2ff0055a26a7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5058,6 +5058,13 @@ S: Supported F: drivers/cpuidle/dt_idle_genpd.c F: drivers/cpuidle/dt_idle_genpd.h +CPUIDLE DRIVER - RISC-V SBI +M: Anup Patel <anup@brainfault.org> +L: linux-pm@vger.kernel.org +L: linux-riscv@lists.infradead.org +S: Maintained +F: drivers/cpuidle/cpuidle-riscv-sbi.c + CRAMFS FILESYSTEM M: Nicolas Pitre <nico@fluxnic.net> S: Maintained diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index f1afe7ab6b54..ff71dd662880 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -66,6 +66,11 @@ depends on PPC source "drivers/cpuidle/Kconfig.powerpc" endmenu +menu "RISC-V CPU Idle Drivers" +depends on RISCV +source "drivers/cpuidle/Kconfig.riscv" +endmenu + config HALTPOLL_CPUIDLE tristate "Halt poll cpuidle driver" depends on X86 && KVM_GUEST diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv new file mode 100644 index 000000000000..78518c26af74 --- /dev/null +++ b/drivers/cpuidle/Kconfig.riscv @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# RISC-V CPU Idle drivers +# + +config RISCV_SBI_CPUIDLE + bool "RISC-V SBI CPU idle Driver" + depends on RISCV_SBI + select DT_IDLE_STATES + select CPU_IDLE_MULTIPLE_DRIVERS + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF + help + Select this option to enable RISC-V SBI firmware based CPU idle + driver for RISC-V systems. This drivers also supports hierarchical + DT based layout of the idle state. diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 11a26cef279f..d103342b7cfc 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o # POWERPC drivers obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o + +############################################################################### +# RISC-V drivers +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-riscv-sbi.o diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c new file mode 100644 index 000000000000..b459eda2cd37 --- /dev/null +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c @@ -0,0 +1,627 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * RISC-V SBI CPU idle driver. + * + * Copyright (c) 2021 Western Digital Corporation or its affiliates. + * Copyright (c) 2022 Ventana Micro Systems Inc. + */ + +#define pr_fmt(fmt) "cpuidle-riscv-sbi: " fmt + +#include <linux/cpuidle.h> +#include <linux/cpumask.h> +#include <linux/cpu_pm.h> +#include <linux/cpu_cooling.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> +#include <asm/cpuidle.h> +#include <asm/sbi.h> +#include <asm/suspend.h> + +#include "dt_idle_states.h" +#include "dt_idle_genpd.h" + +struct sbi_cpuidle_data { + u32 *states; + struct device *dev; +}; + +struct sbi_domain_state { + bool available; + u32 state; +}; + +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data); +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state); +static bool sbi_cpuidle_use_osi; +static bool sbi_cpuidle_use_cpuhp; +static bool sbi_cpuidle_pd_allow_domain_state; + +static inline void sbi_set_domain_state(u32 state) +{ + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); + + data->available = true; + data->state = state; +} + +static inline u32 sbi_get_domain_state(void) +{ + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); + + return data->state; +} + +static inline void sbi_clear_domain_state(void) +{ + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); + + data->available = false; +} + +static inline bool sbi_is_domain_state_available(void) +{ + struct sbi_domain_state *data = this_cpu_ptr(&domain_state); + + return data->available; +} + +static int sbi_suspend_finisher(unsigned long suspend_type, + unsigned long resume_addr, + unsigned long opaque) +{ + struct sbiret ret; + + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, + suspend_type, resume_addr, opaque, 0, 0, 0); + + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0; +} + +static int sbi_suspend(u32 state) +{ + if (state & SBI_HSM_SUSP_NON_RET_BIT) + return cpu_suspend(state, sbi_suspend_finisher); + else + return sbi_suspend_finisher(state, 0, 0); +} + +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx) +{ + u32 *states = __this_cpu_read(sbi_cpuidle_data.states); + + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]); +} + +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx, + bool s2idle) +{ + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data); + u32 *states = data->states; + struct device *pd_dev = data->dev; + u32 state; + int ret; + + ret = cpu_pm_enter(); + if (ret) + return -1; + + /* Do runtime PM to manage a hierarchical CPU toplogy. */ + rcu_irq_enter_irqson(); + if (s2idle) + dev_pm_genpd_suspend(pd_dev); + else + pm_runtime_put_sync_suspend(pd_dev); + rcu_irq_exit_irqson(); + + if (sbi_is_domain_state_available()) + state = sbi_get_domain_state(); + else + state = states[idx]; + + ret = sbi_suspend(state) ? -1 : idx; + + rcu_irq_enter_irqson(); + if (s2idle) + dev_pm_genpd_resume(pd_dev); + else + pm_runtime_get_sync(pd_dev); + rcu_irq_exit_irqson(); + + cpu_pm_exit(); + + /* Clear the domain state to start fresh when back from idle. */ + sbi_clear_domain_state(); + return ret; +} + +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx) +{ + return __sbi_enter_domain_idle_state(dev, drv, idx, false); +} + +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int idx) +{ + return __sbi_enter_domain_idle_state(dev, drv, idx, true); +} + +static int sbi_cpuidle_cpuhp_up(unsigned int cpu) +{ + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); + + if (pd_dev) + pm_runtime_get_sync(pd_dev); + + return 0; +} + +static int sbi_cpuidle_cpuhp_down(unsigned int cpu) +{ + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev); + + if (pd_dev) { + pm_runtime_put_sync(pd_dev); + /* Clear domain state to start fresh at next online. */ + sbi_clear_domain_state(); + } + + return 0; +} + +static void sbi_idle_init_cpuhp(void) +{ + int err; + + if (!sbi_cpuidle_use_cpuhp) + return; + + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, + "cpuidle/sbi:online", + sbi_cpuidle_cpuhp_up, + sbi_cpuidle_cpuhp_down); + if (err) + pr_warn("Failed %d while setup cpuhp state\n", err); +} + +static const struct of_device_id sbi_cpuidle_state_match[] = { + { .compatible = "riscv,idle-state", + .data = sbi_cpuidle_enter_state }, + { }, +}; + +static bool sbi_suspend_state_is_valid(u32 state) +{ + if (state > SBI_HSM_SUSPEND_RET_DEFAULT && + state < SBI_HSM_SUSPEND_RET_PLATFORM) + return false; + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT && + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM) + return false; + return true; +} + +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state) +{ + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state); + + if (err) { + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np); + return err; + } + + if (!sbi_suspend_state_is_valid(*state)) { + pr_warn("Invalid SBI suspend state %#x\n", *state); + return -EINVAL; + } + + return 0; +} + +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv, + struct sbi_cpuidle_data *data, + unsigned int state_count, int cpu) +{ + /* Currently limit the hierarchical topology to be used in OSI mode. */ + if (!sbi_cpuidle_use_osi) + return 0; + + data->dev = dt_idle_attach_cpu(cpu, "sbi"); + if (IS_ERR_OR_NULL(data->dev)) + return PTR_ERR_OR_ZERO(data->dev); + + /* + * Using the deepest state for the CPU to trigger a potential selection + * of a shared state for the domain, assumes the domain states are all + * deeper states. + */ + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state; + drv->states[state_count - 1].enter_s2idle = + sbi_enter_s2idle_domain_idle_state; + sbi_cpuidle_use_cpuhp = true; + + return 0; +} + +static int sbi_cpuidle_dt_init_states(struct device *dev, + struct cpuidle_driver *drv, + unsigned int cpu, + unsigned int state_count) +{ + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); + struct device_node *state_node; + struct device_node *cpu_node; + u32 *states; + int i, ret; + + cpu_node = of_cpu_device_node_get(cpu); + if (!cpu_node) + return -ENODEV; + + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL); + if (!states) { + ret = -ENOMEM; + goto fail; + } + + /* Parse SBI specific details from state DT nodes */ + for (i = 1; i < state_count; i++) { + state_node = of_get_cpu_state_node(cpu_node, i - 1); + if (!state_node) + break; + + ret = sbi_dt_parse_state_node(state_node, &states[i]); + of_node_put(state_node); + + if (ret) + return ret; + + pr_debug("sbi-state %#x index %d\n", states[i], i); + } + if (i != state_count) { + ret = -ENODEV; + goto fail; + } + + /* Initialize optional data, used for the hierarchical topology. */ + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu); + if (ret < 0) + return ret; + + /* Store states in the per-cpu struct. */ + data->states = states; + +fail: + of_node_put(cpu_node); + + return ret; +} + +static void sbi_cpuidle_deinit_cpu(int cpu) +{ + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu); + + dt_idle_detach_cpu(data->dev); + sbi_cpuidle_use_cpuhp = false; +} + +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu) +{ + struct cpuidle_driver *drv; + unsigned int state_count = 0; + int ret = 0; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + drv->name = "sbi_cpuidle"; + drv->owner = THIS_MODULE; + drv->cpumask = (struct cpumask *)cpumask_of(cpu); + + /* RISC-V architectural WFI to be represented as state index 0. */ + drv->states[0].enter = sbi_cpuidle_enter_state; + drv->states[0].exit_latency = 1; + drv->states[0].target_residency = 1; + drv->states[0].power_usage = UINT_MAX; + strcpy(drv->states[0].name, "WFI"); + strcpy(drv->states[0].desc, "RISC-V WFI"); + + /* + * If no DT idle states are detected (ret == 0) let the driver + * initialization fail accordingly since there is no reason to + * initialize the idle driver if only wfi is supported, the + * default archictectural back-end already executes wfi + * on idle entry. + */ + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1); + if (ret <= 0) { + pr_debug("HART%ld: failed to parse DT idle states\n", + cpuid_to_hartid_map(cpu)); + return ret ? : -ENODEV; + } + state_count = ret + 1; /* Include WFI state as well */ + + /* Initialize idle states from DT. */ + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count); + if (ret) { + pr_err("HART%ld: failed to init idle states\n", + cpuid_to_hartid_map(cpu)); + return ret; + } + + ret = cpuidle_register(drv, NULL); + if (ret) + goto deinit; + + cpuidle_cooling_register(drv); + + return 0; +deinit: + sbi_cpuidle_deinit_cpu(cpu); + return ret; +} + +static void sbi_cpuidle_domain_sync_state(struct device *dev) +{ + /* + * All devices have now been attached/probed to the PM domain + * topology, hence it's fine to allow domain states to be picked. + */ + sbi_cpuidle_pd_allow_domain_state = true; +} + +#ifdef CONFIG_DT_IDLE_GENPD + +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd) +{ + struct genpd_power_state *state = &pd->states[pd->state_idx]; + u32 *pd_state; + + if (!state->data) + return 0; + + if (!sbi_cpuidle_pd_allow_domain_state) + return -EBUSY; + + /* OSI mode is enabled, set the corresponding domain state. */ + pd_state = state->data; + sbi_set_domain_state(*pd_state); + + return 0; +} + +struct sbi_pd_provider { + struct list_head link; + struct device_node *node; +}; + +static LIST_HEAD(sbi_pd_providers); + +static int sbi_pd_init(struct device_node *np) +{ + struct generic_pm_domain *pd; + struct sbi_pd_provider *pd_provider; + struct dev_power_governor *pd_gov; + int ret = -ENOMEM, state_count = 0; + + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node); + if (!pd) + goto out; + + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); + if (!pd_provider) + goto free_pd; + + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; + + /* Allow power off when OSI is available. */ + if (sbi_cpuidle_use_osi) + pd->power_off = sbi_cpuidle_pd_power_off; + else + pd->flags |= GENPD_FLAG_ALWAYS_ON; + + /* Use governor for CPU PM domains if it has some states to manage. */ + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL; + + ret = pm_genpd_init(pd, pd_gov, false); + if (ret) + goto free_pd_prov; + + ret = of_genpd_add_provider_simple(np, pd); + if (ret) + goto remove_pd; + + pd_provider->node = of_node_get(np); + list_add(&pd_provider->link, &sbi_pd_providers); + + pr_debug("init PM domain %s\n", pd->name); + return 0; + +remove_pd: + pm_genpd_remove(pd); +free_pd_prov: + kfree(pd_provider); +free_pd: + dt_idle_pd_free(pd); +out: + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); + return ret; +} + +static void sbi_pd_remove(void) +{ + struct sbi_pd_provider *pd_provider, *it; + struct generic_pm_domain *genpd; + + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) { + of_genpd_del_provider(pd_provider->node); + + genpd = of_genpd_remove_last(pd_provider->node); + if (!IS_ERR(genpd)) + kfree(genpd); + + of_node_put(pd_provider->node); + list_del(&pd_provider->link); + kfree(pd_provider); + } +} + +static int sbi_genpd_probe(struct device_node *np) +{ + struct device_node *node; + int ret = 0, pd_count = 0; + + if (!np) + return -ENODEV; + + /* + * Parse child nodes for the "#power-domain-cells" property and + * initialize a genpd/genpd-of-provider pair when it's found. + */ + for_each_child_of_node(np, node) { + if (!of_find_property(node, "#power-domain-cells", NULL)) + continue; + + ret = sbi_pd_init(node); + if (ret) + goto put_node; + + pd_count++; + } + + /* Bail out if not using the hierarchical CPU topology. */ + if (!pd_count) + goto no_pd; + + /* Link genpd masters/subdomains to model the CPU topology. */ + ret = dt_idle_pd_init_topology(np); + if (ret) + goto remove_pd; + + return 0; + +put_node: + of_node_put(node); +remove_pd: + sbi_pd_remove(); + pr_err("failed to create CPU PM domains ret=%d\n", ret); +no_pd: + return ret; +} + +#else + +static inline int sbi_genpd_probe(struct device_node *np) +{ + return 0; +} + +#endif + +static int sbi_cpuidle_probe(struct platform_device *pdev) +{ + int cpu, ret; + struct cpuidle_driver *drv; + struct cpuidle_device *dev; + struct device_node *np, *pds_node; + + /* Detect OSI support based on CPU DT nodes */ + sbi_cpuidle_use_osi = true; + for_each_possible_cpu(cpu) { + np = of_cpu_device_node_get(cpu); + if (np && + of_find_property(np, "power-domains", NULL) && + of_find_property(np, "power-domain-names", NULL)) { + continue; + } else { + sbi_cpuidle_use_osi = false; + break; + } + } + + /* Populate generic power domains from DT nodes */ + pds_node = of_find_node_by_path("/cpus/power-domains"); + if (pds_node) { + ret = sbi_genpd_probe(pds_node); + of_node_put(pds_node); + if (ret) + return ret; + } + + /* Initialize CPU idle driver for each CPU */ + for_each_possible_cpu(cpu) { + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu); + if (ret) { + pr_debug("HART%ld: idle driver init failed\n", + cpuid_to_hartid_map(cpu)); + goto out_fail; + } + } + + /* Setup CPU hotplut notifiers */ + sbi_idle_init_cpuhp(); + + pr_info("idle driver registered for all CPUs\n"); + + return 0; + +out_fail: + while (--cpu >= 0) { + dev = per_cpu(cpuidle_devices, cpu); + drv = cpuidle_get_cpu_driver(dev); + cpuidle_unregister(drv); + sbi_cpuidle_deinit_cpu(cpu); + } + + return ret; +} + +static struct platform_driver sbi_cpuidle_driver = { + .probe = sbi_cpuidle_probe, + .driver = { + .name = "sbi-cpuidle", + .sync_state = sbi_cpuidle_domain_sync_state, + }, +}; + +static int __init sbi_cpuidle_init(void) +{ + int ret; + struct platform_device *pdev; + + /* + * The SBI HSM suspend function is only available when: + * 1) SBI version is 0.3 or higher + * 2) SBI HSM extension is available + */ + if ((sbi_spec_version < sbi_mk_version(0, 3)) || + sbi_probe_extension(SBI_EXT_HSM) <= 0) { + pr_info("HSM suspend not available\n"); + return 0; + } + + ret = platform_driver_register(&sbi_cpuidle_driver); + if (ret) + return ret; + + pdev = platform_device_register_simple("sbi-cpuidle", + -1, NULL, 0); + if (IS_ERR(pdev)) { + platform_driver_unregister(&sbi_cpuidle_driver); + return PTR_ERR(pdev); + } + + return 0; +} +device_initcall(sbi_cpuidle_init);