Message ID | 20211013170447.10414-1-jorge@foundries.io |
---|---|
State | Deferred |
Delegated to: | Tom Rini |
Headers | show |
Series | [PATCHv2] arm64: zynqmp: Print the secure boot status information | expand |
On 13/10/21, Jorge Ramirez-Ortiz wrote: > Output the secure boot configuration to the console. Hi, Michal was there any reason for not merging this patch? thanks Jorge > > Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> > --- > > v2: > Michal review 12 Aug 2021 > print information on SPL and UBOOT > improve the print command > add macros to mask the status > > arch/arm/mach-zynqmp/include/mach/hardware.h | 6 +++++- > board/xilinx/zynqmp/zynqmp.c | 14 ++++++++++++++ > 2 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h > index eebf38551c..c6b1464a9f 100644 > --- a/arch/arm/mach-zynqmp/include/mach/hardware.h > +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h > @@ -141,8 +141,12 @@ struct apu_regs { > #define ZYNQMP_SILICON_VER_MASK 0xF > #define ZYNQMP_SILICON_VER_SHIFT 0 > > +#define ZYNQMP_CSU_STATUS_AUTHENTICATED BIT(0) > +#define ZYNQMP_CSU_STATUS_ENCRYPTED BIT(1) > + > struct csu_regs { > - u32 reserved0[4]; > + u32 status; > + u32 reserved0[3]; > u32 multi_boot; > u32 reserved1[11]; > u32 idcode; > diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c > index 000a7cde8d..3e7ca2e9c6 100644 > --- a/board/xilinx/zynqmp/zynqmp.c > +++ b/board/xilinx/zynqmp/zynqmp.c > @@ -358,6 +358,18 @@ static int multi_boot(void) > return multiboot; > } > > +static void print_secure_boot(void) > +{ > + u32 status = 0; > + > + if (zynqmp_mmio_read((ulong)&csu_base->status, &status)) > + return; > + > + printf("Secure Boot:\t%sauthenticated, %sencrypted\n", > + status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ", > + status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); > +} > + > #define PS_SYSMON_ANALOG_BUS_VAL 0x3210 > #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 > > @@ -394,6 +406,8 @@ int board_init(void) > fpga_add(fpga_xilinx, &zynqmppl); > #endif > > + /* display secure boot information */ > + print_secure_boot(); > if (current_el() == 3) > printf("Multiboot:\t%d\n", multi_boot()); > > -- > 2.31.1 >
On 10/13/21 19:04, Jorge Ramirez-Ortiz wrote: > Output the secure boot configuration to the console. > > Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> > --- > > v2: > Michal review 12 Aug 2021 > print information on SPL and UBOOT > improve the print command > add macros to mask the status > > arch/arm/mach-zynqmp/include/mach/hardware.h | 6 +++++- > board/xilinx/zynqmp/zynqmp.c | 14 ++++++++++++++ > 2 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h > index eebf38551c..c6b1464a9f 100644 > --- a/arch/arm/mach-zynqmp/include/mach/hardware.h > +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h > @@ -141,8 +141,12 @@ struct apu_regs { > #define ZYNQMP_SILICON_VER_MASK 0xF > #define ZYNQMP_SILICON_VER_SHIFT 0 > > +#define ZYNQMP_CSU_STATUS_AUTHENTICATED BIT(0) > +#define ZYNQMP_CSU_STATUS_ENCRYPTED BIT(1) > + > struct csu_regs { > - u32 reserved0[4]; > + u32 status; > + u32 reserved0[3]; > u32 multi_boot; > u32 reserved1[11]; > u32 idcode; > diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c > index 000a7cde8d..3e7ca2e9c6 100644 > --- a/board/xilinx/zynqmp/zynqmp.c > +++ b/board/xilinx/zynqmp/zynqmp.c > @@ -358,6 +358,18 @@ static int multi_boot(void) > return multiboot; > } > > +static void print_secure_boot(void) > +{ > + u32 status = 0; > + > + if (zynqmp_mmio_read((ulong)&csu_base->status, &status)) > + return; > + > + printf("Secure Boot:\t%sauthenticated, %sencrypted\n", > + status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ", > + status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); > +} > + > #define PS_SYSMON_ANALOG_BUS_VAL 0x3210 > #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 > > @@ -394,6 +406,8 @@ int board_init(void) > fpga_add(fpga_xilinx, &zynqmppl); > #endif > > + /* display secure boot information */ > + print_secure_boot(); > if (current_el() == 3) > printf("Multiboot:\t%d\n", multi_boot()); > Applied. M
Hi, pá 4. 2. 2022 v 8:47 odesílatel Jorge Ramirez-Ortiz, Foundries <jorge@foundries.io> napsal: > > On 13/10/21, Jorge Ramirez-Ortiz wrote: > > Output the secure boot configuration to the console. > > > Hi, Michal > was there any reason for not merging this patch? thanks for the reminder. I just didn't see it. Thanks, Michal
On 04/02/22, Michal Simek wrote: > Hi, > > pá 4. 2. 2022 v 8:47 odesílatel Jorge Ramirez-Ortiz, Foundries > <jorge@foundries.io> napsal: > > > > On 13/10/21, Jorge Ramirez-Ortiz wrote: > > > Output the secure boot configuration to the console. > > > > > > Hi, Michal > > was there any reason for not merging this patch? > > thanks for the reminder. I just didn't see it. awesome. thanks! > > Thanks, > Michal
diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h index eebf38551c..c6b1464a9f 100644 --- a/arch/arm/mach-zynqmp/include/mach/hardware.h +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h @@ -141,8 +141,12 @@ struct apu_regs { #define ZYNQMP_SILICON_VER_MASK 0xF #define ZYNQMP_SILICON_VER_SHIFT 0 +#define ZYNQMP_CSU_STATUS_AUTHENTICATED BIT(0) +#define ZYNQMP_CSU_STATUS_ENCRYPTED BIT(1) + struct csu_regs { - u32 reserved0[4]; + u32 status; + u32 reserved0[3]; u32 multi_boot; u32 reserved1[11]; u32 idcode; diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 000a7cde8d..3e7ca2e9c6 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -358,6 +358,18 @@ static int multi_boot(void) return multiboot; } +static void print_secure_boot(void) +{ + u32 status = 0; + + if (zynqmp_mmio_read((ulong)&csu_base->status, &status)) + return; + + printf("Secure Boot:\t%sauthenticated, %sencrypted\n", + status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ", + status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); +} + #define PS_SYSMON_ANALOG_BUS_VAL 0x3210 #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 @@ -394,6 +406,8 @@ int board_init(void) fpga_add(fpga_xilinx, &zynqmppl); #endif + /* display secure boot information */ + print_secure_boot(); if (current_el() == 3) printf("Multiboot:\t%d\n", multi_boot());
Output the secure boot configuration to the console. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> --- v2: Michal review 12 Aug 2021 print information on SPL and UBOOT improve the print command add macros to mask the status arch/arm/mach-zynqmp/include/mach/hardware.h | 6 +++++- board/xilinx/zynqmp/zynqmp.c | 14 ++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-)