[v2,4/5] vexpress64: Enable OF_CONTROL and OF_BOARD for VExpress64

From: Peter Hoyes <Peter.Hoyes@arm.com>

Capture x0 in lowlevel_init.S as potential fdt address. Modify
board_fdt_blob_setup to use fdt address from either vexpress_aemv8.h
or lowlevel_init.S.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
---
 board/armltd/vexpress64/Makefile        |  2 +-
 board/armltd/vexpress64/lowlevel_init.S | 12 ++++++++++++
 board/armltd/vexpress64/vexpress64.c    | 26 +++++++++++++++++++++++++
 3 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 board/armltd/vexpress64/lowlevel_init.S

On Thu, 11 Nov 2021 09:26:02 +0000
Peter Hoyes <peter.hoyes@arm.com> wrote:

> From: Peter Hoyes <Peter.Hoyes@arm.com>
> 
> Capture x0 in lowlevel_init.S as potential fdt address. Modify
> board_fdt_blob_setup to use fdt address from either vexpress_aemv8.h
> or lowlevel_init.S.
> 

Thanks, looks good now:

> Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  board/armltd/vexpress64/Makefile        |  2 +-
>  board/armltd/vexpress64/lowlevel_init.S | 12 ++++++++++++
>  board/armltd/vexpress64/vexpress64.c    | 26 +++++++++++++++++++++++++
>  3 files changed, 39 insertions(+), 1 deletion(-)
>  create mode 100644 board/armltd/vexpress64/lowlevel_init.S
> 
> diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
> index 868dc4f629..1878fbed4e 100644
> --- a/board/armltd/vexpress64/Makefile
> +++ b/board/armltd/vexpress64/Makefile
> @@ -3,5 +3,5 @@
>  # (C) Copyright 2000-2004
>  # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
>  
> -obj-y	:= vexpress64.o
> +obj-y	:= vexpress64.o lowlevel_init.o
>  obj-$(CONFIG_TARGET_VEXPRESS64_JUNO)	+= pcie.o
> diff --git a/board/armltd/vexpress64/lowlevel_init.S b/board/armltd/vexpress64/lowlevel_init.S
> new file mode 100644
> index 0000000000..3dcfb85d0e
> --- /dev/null
> +++ b/board/armltd/vexpress64/lowlevel_init.S
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * (C) Copyright 2021 Arm Limited
> + */
> +
> +.global save_boot_params
> +save_boot_params:
> +
> +	adr	x8, prior_stage_fdt_address
> +	str	x0, [x8]
> +
> +	b	save_boot_params_ret
> diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
> index d2f307cca5..d17b463be5 100644
> --- a/board/armltd/vexpress64/vexpress64.c
> +++ b/board/armltd/vexpress64/vexpress64.c
> @@ -85,7 +85,15 @@ int dram_init_banksize(void)
>  	return 0;
>  }
>  
> +/* Assigned in lowlevel_init.S
> + * Push the variable into the .data section so that it
> + * does not get cleared later.
> + */
> +unsigned long __section(".data") prior_stage_fdt_address;
> +
>  #ifdef CONFIG_OF_BOARD
> +
> +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
>  #define JUNO_FLASH_SEC_SIZE	(256 * 1024)
>  static phys_addr_t find_dtb_in_nor_flash(const char *partname)
>  {
> @@ -130,9 +138,11 @@ static phys_addr_t find_dtb_in_nor_flash(const char *partname)
>  
>  	return ~0;
>  }
> +#endif
>  
>  void *board_fdt_blob_setup(int *err)
>  {
> +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
>  	phys_addr_t fdt_rom_addr = find_dtb_in_nor_flash(CONFIG_JUNO_DTB_PART);
>  
>  	*err = 0;
> @@ -142,6 +152,22 @@ void *board_fdt_blob_setup(int *err)
>  	}
>  
>  	return (void *)fdt_rom_addr;
> +#endif
> +
> +#ifdef VEXPRESS_FDT_ADDR
> +	if (fdt_magic(VEXPRESS_FDT_ADDR) == FDT_MAGIC) {
> +		*err = 0;
> +		return (void *)VEXPRESS_FDT_ADDR;
> +	}
> +#endif
> +
> +	if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC) {
> +		*err = 0;
> +		return (void *)prior_stage_fdt_address;
> +	}
> +
> +	*err = -ENXIO;
> +	return NULL;
>  }
>  #endif
>

On Thu, Nov 11, 2021 at 09:26:02AM +0000, Peter Hoyes wrote:

> From: Peter Hoyes <Peter.Hoyes@arm.com>
> 
> Capture x0 in lowlevel_init.S as potential fdt address. Modify
> board_fdt_blob_setup to use fdt address from either vexpress_aemv8.h
> or lowlevel_init.S.
> 
> Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Applied to u-boot/next, thanks!