Message ID | 20211103091839.1665672-2-horatiu.vultur@microchip.com |
---|---|
State | Needs Review / ACK |
Delegated to: | Peter Rosin |
Headers | show |
Series | i2c-mux-gpmux: Support settle-time-us property | expand |
On Wed, Nov 03, 2021 at 10:18:38AM +0100, Horatiu Vultur wrote: > Some HW requires some time for the signals to settle after the muxing is > changed. Allow this time to be specified in device tree. > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > --- > Documentation/devicetree/bindings/i2c/i2c-mux.yaml | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > index 24cac36037f5..4c81e56d02f7 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > @@ -19,6 +19,11 @@ description: |+ > populating the i2c child busses. If an 'i2c-mux' subnode is present, only > subnodes of this will be considered as i2c child busses. > > + Optional properties may not be supported by all drivers. However, if a driver > + wants to support one of the below features, it should adopt these bindings. What drivers? Bindings are independent. I don't think you need the comment, but this should be a separate change with an explanation along the lines of what we discussed. > + > +select: false > + > properties: > $nodename: > pattern: '^(i2c-?)?mux' > @@ -29,6 +34,11 @@ properties: > '#size-cells': > const: 0 > > + settle-time-us: > + default: 0 > + description: > + The time required for the signals to settle. > + > patternProperties: > '^i2c@[0-9a-f]+$': > $ref: /schemas/i2c/i2c-controller.yaml > @@ -41,6 +51,10 @@ patternProperties: > > additionalProperties: true > > +required: > + - '#address-cells' > + - '#size-cells' > + This too is a separate change. > examples: > - | > /* > -- > 2.33.0 > >
The 11/12/2021 13:51, Rob Herring wrote: Hi Rob, Sorry for the late reply, I was caught with some other patches. > > On Wed, Nov 03, 2021 at 10:18:38AM +0100, Horatiu Vultur wrote: > > Some HW requires some time for the signals to settle after the muxing is > > changed. Allow this time to be specified in device tree. > > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > > --- > > Documentation/devicetree/bindings/i2c/i2c-mux.yaml | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > > index 24cac36037f5..4c81e56d02f7 100644 > > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml > > @@ -19,6 +19,11 @@ description: |+ > > populating the i2c child busses. If an 'i2c-mux' subnode is present, only > > subnodes of this will be considered as i2c child busses. > > > > + Optional properties may not be supported by all drivers. However, if a driver > > + wants to support one of the below features, it should adopt these bindings. > > What drivers? Bindings are independent. I don't think you need the > comment, but this should be a separate change with an explanation along > the lines of what we discussed. > > > + > > +select: false > > + > > properties: > > $nodename: > > pattern: '^(i2c-?)?mux' > > @@ -29,6 +34,11 @@ properties: > > '#size-cells': > > const: 0 > > > > + settle-time-us: > > + default: 0 > > + description: > > + The time required for the signals to settle. > > + > > patternProperties: > > '^i2c@[0-9a-f]+$': > > $ref: /schemas/i2c/i2c-controller.yaml > > @@ -41,6 +51,10 @@ patternProperties: > > > > additionalProperties: true > > > > +required: > > + - '#address-cells' > > + - '#size-cells' > > + > > This too is a separate change. So just to be sure that I follow up correctly, then there will be one patch with the 'select: false' explaining why is added and another one with the new property and the required properties. Or am I still off? > > > examples: > > - | > > /* > > -- > > 2.33.0 > > > >
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml index 24cac36037f5..4c81e56d02f7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml @@ -19,6 +19,11 @@ description: |+ populating the i2c child busses. If an 'i2c-mux' subnode is present, only subnodes of this will be considered as i2c child busses. + Optional properties may not be supported by all drivers. However, if a driver + wants to support one of the below features, it should adopt these bindings. + +select: false + properties: $nodename: pattern: '^(i2c-?)?mux' @@ -29,6 +34,11 @@ properties: '#size-cells': const: 0 + settle-time-us: + default: 0 + description: + The time required for the signals to settle. + patternProperties: '^i2c@[0-9a-f]+$': $ref: /schemas/i2c/i2c-controller.yaml @@ -41,6 +51,10 @@ patternProperties: additionalProperties: true +required: + - '#address-cells' + - '#size-cells' + examples: - | /*
Some HW requires some time for the signals to settle after the muxing is changed. Allow this time to be specified in device tree. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- Documentation/devicetree/bindings/i2c/i2c-mux.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)