Message ID | 20211018085754.1066056-1-horatiu.vultur@microchip.com |
---|---|
Headers | show |
Series | pinctrl: pinctrl-microchip-sgpio: Extend to call reset driver | expand |
Hi Horatiu, On Mon, 2021-10-18 at 10:57 +0200, Horatiu Vultur wrote: > On lan966x platform when the switch gets reseted then also the sgpio > gets reseted. The fix for this is to extend also the sgpio driver to > call the reset driver which will be reseted only once by the first > driver that is probed. > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > --- > drivers/pinctrl/pinctrl-microchip-sgpio.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c > index 072bccdea2a5..78765faa245a 100644 > --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c > +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c > @@ -17,6 +17,7 @@ > #include <linux/pinctrl/pinmux.h> > #include <linux/platform_device.h> > #include <linux/property.h> > +#include <linux/reset.h> > > #include "core.h" > #include "pinconf.h" > @@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > int div_clock = 0, ret, port, i, nbanks; > struct device *dev = &pdev->dev; > struct fwnode_handle *fwnode; > + struct reset_control *reset; > struct sgpio_priv *priv; > struct clk *clk; > u32 val; > @@ -813,6 +815,11 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > priv->dev = dev; > > + reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); This is the first GPIO driver that I am aware of that requests a named reset control, so I'm still not sure if this should be called "switch" instead of "gpio" or just "reset", just in case there is a future model where the GPIO controller reset is not shared with the switch reset. > + if (IS_ERR(reset)) > + return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n"); > + reset_control_reset(reset); > + > clk = devm_clk_get(dev, NULL); > if (IS_ERR(clk)) > return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n"); But whichever name you choose, the code is Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
The 10/18/2021 12:37, Philipp Zabel wrote: Hi Philipp, > > Hi Horatiu, > > On Mon, 2021-10-18 at 10:57 +0200, Horatiu Vultur wrote: > > On lan966x platform when the switch gets reseted then also the sgpio > > gets reseted. The fix for this is to extend also the sgpio driver to > > call the reset driver which will be reseted only once by the first > > driver that is probed. > > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > > --- > > drivers/pinctrl/pinctrl-microchip-sgpio.c | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c > > index 072bccdea2a5..78765faa245a 100644 > > --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c > > +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c > > @@ -17,6 +17,7 @@ > > #include <linux/pinctrl/pinmux.h> > > #include <linux/platform_device.h> > > #include <linux/property.h> > > +#include <linux/reset.h> > > > > #include "core.h" > > #include "pinconf.h" > > @@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > int div_clock = 0, ret, port, i, nbanks; > > struct device *dev = &pdev->dev; > > struct fwnode_handle *fwnode; > > + struct reset_control *reset; > > struct sgpio_priv *priv; > > struct clk *clk; > > u32 val; > > @@ -813,6 +815,11 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > > > priv->dev = dev; > > > > + reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); > > This is the first GPIO driver that I am aware of that requests a named > reset control, so I'm still not sure if this should be called "switch" > instead of "gpio" or just "reset", just in case there is a future model > where the GPIO controller reset is not shared with the switch reset. I agree, it is not the best name. But the name "switch" was already used in DT by sparx5[1], so I just went with this name. > > > + if (IS_ERR(reset)) > > + return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n"); > > + reset_control_reset(reset); > > + > > clk = devm_clk_get(dev, NULL); > > if (IS_ERR(clk)) > > return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n"); > > But whichever name you choose, the code is > > Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> > > regards > Philipp [1] https://elixir.bootlin.com/linux/v5.15-rc5/source/arch/arm64/boot/dts/microchip/sparx5.dtsi#L307
On Mon, 2021-10-18 at 13:12 +0200, Horatiu Vultur wrote: > The 10/18/2021 12:37, Philipp Zabel wrote: > > Hi Philipp, > > Hi Horatiu, > > > > On Mon, 2021-10-18 at 10:57 +0200, Horatiu Vultur wrote: > > > On lan966x platform when the switch gets reseted then also the sgpio > > > gets reseted. The fix for this is to extend also the sgpio driver to > > > call the reset driver which will be reseted only once by the first > > > driver that is probed. > > > > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> > > > --- > > > drivers/pinctrl/pinctrl-microchip-sgpio.c | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c > > > index 072bccdea2a5..78765faa245a 100644 > > > --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c > > > +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c > > > @@ -17,6 +17,7 @@ > > > #include <linux/pinctrl/pinmux.h> > > > #include <linux/platform_device.h> > > > #include <linux/property.h> > > > +#include <linux/reset.h> > > > > > > #include "core.h" > > > #include "pinconf.h" > > > @@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > > int div_clock = 0, ret, port, i, nbanks; > > > struct device *dev = &pdev->dev; > > > struct fwnode_handle *fwnode; > > > + struct reset_control *reset; > > > struct sgpio_priv *priv; > > > struct clk *clk; > > > u32 val; > > > @@ -813,6 +815,11 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > > > > > priv->dev = dev; > > > > > > + reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); > > > > This is the first GPIO driver that I am aware of that requests a named > > reset control, so I'm still not sure if this should be called "switch" > > instead of "gpio" or just "reset", just in case there is a future model > > where the GPIO controller reset is not shared with the switch reset. > > I agree, it is not the best name. But the name "switch" was already used > in DT by sparx5[1], so I just went with this name. Oh, ok, in that case the decision already has been made. regards Philipp
On Mon, 2021-10-18 at 10:57 +0200, Horatiu Vultur wrote: > On lan966x platform when the switch gets reseted then also the sgpio > gets reseted. The fix for this is to extend also the sgpio driver to > call the reset driver which will be reseted only once by the first > driver that is probed. > > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
On Mon, Oct 18, 2021 at 10:56 AM Horatiu Vultur <horatiu.vultur@microchip.com> wrote: > v5->v6: > - fix warnings reported by 'make dtbs_check' > - add back the name of the reset line Patch set v6 applied, thanks for working this out! Yours, Linus Walleij