Message ID | 20211007134641.13417-3-vincent.whitchurch@axis.com |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | Add settle time support to iio-mux | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/dt-meta-schema | success | |
robh/dtbs-check | fail | build log |
On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: > Hardware may require some time for the muxed analog signals to settle > after the muxing is changed. Allow this time to be specified in the > devicetree. > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> > --- > .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1537724 adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc11mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc12mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc13mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc1mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc2mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc3mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc4mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc5mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc6mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc7mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc8mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc9mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements arch/arm/boot/dts/at91-tse850-3.dt.yaml
On Fri, Oct 08, 2021 at 04:46:12AM +0200, Rob Herring wrote: > On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: > > Hardware may require some time for the muxed analog signals to settle > > after the muxing is changed. Allow this time to be specified in the > > devicetree. > > > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> > > --- > > .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > Running 'make dtbs_check' with the schema in this patch gives the > following warnings. Consider if they are expected or the schema is > incorrect. These may not be new warnings. Yes, these are not new warnings. > Note that it is not yet a requirement to have 0 warnings for dtbs_check. > This will change in the future. > > Full log is available here: https://patchwork.ozlabs.org/patch/1537724 > > > adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml > > adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml [...] I think the fix for these is to add a "#io-channel-cells": const 1 to the schema. > envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements > arch/arm/boot/dts/at91-tse850-3.dt.yaml This one looks like an error in that particular devicetree.
On 2021-10-08 15:56, Vincent Whitchurch wrote: > On Fri, Oct 08, 2021 at 04:46:12AM +0200, Rob Herring wrote: >> On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: >>> Hardware may require some time for the muxed analog signals to settle >>> after the muxing is changed. Allow this time to be specified in the >>> devicetree. >>> >>> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> >>> --- >>> .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >> >> Running 'make dtbs_check' with the schema in this patch gives the >> following warnings. Consider if they are expected or the schema is >> incorrect. These may not be new warnings. > > Yes, these are not new warnings. > >> Note that it is not yet a requirement to have 0 warnings for dtbs_check. >> This will change in the future. >> >> Full log is available here: https://patchwork.ozlabs.org/patch/1537724 >> >> >> adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' >> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml >> >> adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' >> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml > [...] > > I think the fix for these is to add a "#io-channel-cells": const 1 to > the schema. Agreed. >> envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements >> arch/arm/boot/dts/at91-tse850-3.dt.yaml > > This one looks like an error in that particular devicetree. > The double '' is intentional; this mux is 8-way but only 6 legs are connected, with the first two unused. I don't know how or where to make changes to dodge the warning. I don't want to put names on things that do not exist, and the iio-mux driver is using empty names as a hint to not configure any child channel for those indices that have empty names. If e.g. channels 0-5 are in use, then this is not a problem since you can just end early with 6 names instead of 8, but alas, channels 2-7 was what the hw-crowd fancied in this case. Cheers, Peter
On Fri, Oct 8, 2021 at 10:27 AM Peter Rosin <peda@axentia.se> wrote: > > On 2021-10-08 15:56, Vincent Whitchurch wrote: > > On Fri, Oct 08, 2021 at 04:46:12AM +0200, Rob Herring wrote: > >> On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: > >>> Hardware may require some time for the muxed analog signals to settle > >>> after the muxing is changed. Allow this time to be specified in the > >>> devicetree. > >>> > >>> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> > >>> --- > >>> .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ > >>> 1 file changed, 5 insertions(+) > >>> > >> > >> Running 'make dtbs_check' with the schema in this patch gives the > >> following warnings. Consider if they are expected or the schema is > >> incorrect. These may not be new warnings. > > > > Yes, these are not new warnings. > > > >> Note that it is not yet a requirement to have 0 warnings for dtbs_check. > >> This will change in the future. > >> > >> Full log is available here: https://patchwork.ozlabs.org/patch/1537724 > >> > >> > >> adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' > >> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml > >> > >> adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' > >> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml > > [...] > > > > I think the fix for these is to add a "#io-channel-cells": const 1 to > > the schema. > > Agreed. > > >> envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements > >> arch/arm/boot/dts/at91-tse850-3.dt.yaml > > > > This one looks like an error in that particular devicetree. > > > The double '' is intentional; this mux is 8-way but only 6 legs are > connected, with the first two unused. I don't know how or where to make > changes to dodge the warning. I don't want to put names on things that > do not exist, and the iio-mux driver is using empty names as a hint to > not configure any child channel for those indices that have empty names. > If e.g. channels 0-5 are in use, then this is not a problem since you > can just end early with 6 names instead of 8, but alas, channels 2-7 > was what the hw-crowd fancied in this case. There's a specific string type for this: non-unique-string-array Unfortunately, no way to say unique or empty strings. Rob
On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: > Hardware may require some time for the muxed analog signals to settle > after the muxing is changed. Allow this time to be specified in the > devicetree. > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> > --- > .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml index 870b043406d8..5a7328042c76 100644 --- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml +++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml @@ -39,6 +39,11 @@ properties: description: List of strings, labeling the mux controller states. + settle-time-us: + default: 0 + description: + Time required for analog signals to settle after muxing. + required: - compatible - io-channels
Hardware may require some time for the muxed analog signals to settle after the muxing is changed. Allow this time to be specified in the devicetree. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> --- .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ 1 file changed, 5 insertions(+)