Message ID | deb38e39-7946-6de4-2667-c314664d8dfb@suse.com |
---|---|
State | Accepted |
Delegated to: | Tom Rini |
Headers | show |
Series | [GIT,PULL] rpi: updates for v2021.10 | expand |
On Wed, Sep 15, 2021 at 4:40 PM Matthias Brugger <mbrugger@suse.com> wrote: > > Hi Tom, > > I know, quite a bit late but here come the updates for RPi for v2021.10. > Actually most of the patches are fixes. > > Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already > provides a frambebuffer node. > > Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. > > My SMBIOS patchesfixes an issue that show up with > e4f8e543f1 ("smbios: Drop the unused Kconfig options"). > Basically the SMBIOS table broke and wasn't readable anymore. > > I think we can argue if the last one is a real fix. In case you just want to > take the first two so late in the cycle, let me know and I can provide you with > a separate pull request. It would also be good to get these[1] , although it doesn't seem like they were also posted to the list. It fixes a regression with U-Boot and recent RPi firmwares [2] so will likely come up sooner rather than later post release. Peter [1] https://patchwork.ozlabs.org/project/uboot/list/?series=262375 [2] https://github.com/raspberrypi/firmware/issues/1619 > Regards, > Matthias > > --- > > The following changes since commit bb92678ced0b1594b93ab2f10b2c17750c789c96: > > > > Prepare v2021.10-rc4 (2021-09-14 18:58:10 -0400) > > > > are available in the Git repository at: > > > > https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git/ rpi-next > > > > for you to fetch changes up to acc6987e59137485dbac0ee4a07cc349210954f3: > > > > rpi: Conditionally add simple-framebuffer node (2021-09-15 13:34:06 +0200) > > > > ---------------------------------------------------------------- > > Ivan T. Ivanov (1): > > rpi: Conditionally add simple-framebuffer node > > > > Marek Szyprowski (1): > > ARM: bcm283x: change the virtual address of the XHCI PCI device base > > > > Matthias Brugger (2): > > arm: dts: bcm283x: Add minimal smbios information > > configs: rpi: Enable SMBIOS sysinfo driver > > > > arch/arm/dts/bcm283x-u-boot.dtsi | 19 +++++++++++++++++++ > > arch/arm/mach-bcm283x/init.c | 4 ++-- > > board/raspberrypi/rpi/rpi.c | 11 +++++------ > > configs/rpi_0_w_defconfig | 2 ++ > > configs/rpi_2_defconfig | 2 ++ > > configs/rpi_3_32b_defconfig | 2 ++ > > configs/rpi_3_b_plus_defconfig | 2 ++ > > configs/rpi_3_defconfig | 2 ++ > > configs/rpi_4_32b_defconfig | 2 ++ > > configs/rpi_4_defconfig | 2 ++ > > configs/rpi_arm64_defconfig | 2 ++ > > configs/rpi_defconfig | 2 ++ > > 12 files changed, 44 insertions(+), 8 deletions(-) >
Peter, On 9/15/21 11:32 AM, Peter Robinson wrote: > On Wed, Sep 15, 2021 at 4:40 PM Matthias Brugger <mbrugger@suse.com> wrote: >> Hi Tom, >> >> I know, quite a bit late but here come the updates for RPi for v2021.10. >> Actually most of the patches are fixes. >> >> Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already >> provides a frambebuffer node. >> >> Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. >> >> My SMBIOS patchesfixes an issue that show up with >> e4f8e543f1 ("smbios: Drop the unused Kconfig options"). >> Basically the SMBIOS table broke and wasn't readable anymore. >> >> I think we can argue if the last one is a real fix. In case you just want to >> take the first two so late in the cycle, let me know and I can provide you with >> a separate pull request. > It would also be good to get these[1] , although it doesn't seem like > they were also posted to the list. It fixes a regression with U-Boot > and recent RPi firmwares [2] so will likely come up sooner rather than > later post release. > > Peter I did send these to the u-boot list but received an "awaiting moderator approval" response. Is there a different list i should have submitted this to, just for future reference? > [1] https://patchwork.ozlabs.org/project/uboot/list/?series=262375 > [2] https://github.com/raspberrypi/firmware/issues/1619 > >> Regards, >> Matthias >> >> --- >> >> The following changes since commit bb92678ced0b1594b93ab2f10b2c17750c789c96: >> >> >> >> Prepare v2021.10-rc4 (2021-09-14 18:58:10 -0400) >> >> >> >> are available in the Git repository at: >> >> >> >> https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git/ rpi-next >> >> >> >> for you to fetch changes up to acc6987e59137485dbac0ee4a07cc349210954f3: >> >> >> >> rpi: Conditionally add simple-framebuffer node (2021-09-15 13:34:06 +0200) >> >> >> >> ---------------------------------------------------------------- >> >> Ivan T. Ivanov (1): >> >> rpi: Conditionally add simple-framebuffer node >> >> >> >> Marek Szyprowski (1): >> >> ARM: bcm283x: change the virtual address of the XHCI PCI device base >> >> >> >> Matthias Brugger (2): >> >> arm: dts: bcm283x: Add minimal smbios information >> >> configs: rpi: Enable SMBIOS sysinfo driver >> >> >> >> arch/arm/dts/bcm283x-u-boot.dtsi | 19 +++++++++++++++++++ >> >> arch/arm/mach-bcm283x/init.c | 4 ++-- >> >> board/raspberrypi/rpi/rpi.c | 11 +++++------ >> >> configs/rpi_0_w_defconfig | 2 ++ >> >> configs/rpi_2_defconfig | 2 ++ >> >> configs/rpi_3_32b_defconfig | 2 ++ >> >> configs/rpi_3_b_plus_defconfig | 2 ++ >> >> configs/rpi_3_defconfig | 2 ++ >> >> configs/rpi_4_32b_defconfig | 2 ++ >> >> configs/rpi_4_defconfig | 2 ++ >> >> configs/rpi_arm64_defconfig | 2 ++ >> >> configs/rpi_defconfig | 2 ++ >> >> 12 files changed, 44 insertions(+), 8 deletions(-) >>
On Wed, Sep 15, 2021 at 12:40:29PM -0500, Vincent Fazio wrote: > Peter, > > On 9/15/21 11:32 AM, Peter Robinson wrote: > > On Wed, Sep 15, 2021 at 4:40 PM Matthias Brugger <mbrugger@suse.com> wrote: > > > Hi Tom, > > > > > > I know, quite a bit late but here come the updates for RPi for v2021.10. > > > Actually most of the patches are fixes. > > > > > > Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already > > > provides a frambebuffer node. > > > > > > Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. > > > > > > My SMBIOS patchesfixes an issue that show up with > > > e4f8e543f1 ("smbios: Drop the unused Kconfig options"). > > > Basically the SMBIOS table broke and wasn't readable anymore. > > > > > > I think we can argue if the last one is a real fix. In case you just want to > > > take the first two so late in the cycle, let me know and I can provide you with > > > a separate pull request. > > It would also be good to get these[1] , although it doesn't seem like > > they were also posted to the list. It fixes a regression with U-Boot > > and recent RPi firmwares [2] so will likely come up sooner rather than > > later post release. > > > > Peter > > I did send these to the u-boot list but received an "awaiting moderator > approval" response. > > Is there a different list i should have submitted this to, just for future > reference? > > > [1] https://patchwork.ozlabs.org/project/uboot/list/?series=262375 This is the correct list. That it's in patchwork means it went to the list, even. Moderator approval happens a few times a day (US/Eastern) or when I see a number of obviously not spam requests go by, JFYI.
On Wed, Sep 15, 2021 at 05:39:52PM +0200, Matthias Brugger wrote: > Hi Tom, > > I know, quite a bit late but here come the updates for RPi for v2021.10. > Actually most of the patches are fixes. > > Ivan's patch fixes a kernel warning when booting RPi2, as the firmware > already provides a frambebuffer node. > > Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. > > My SMBIOS patchesfixes an issue that show up with > e4f8e543f1 ("smbios: Drop the unused Kconfig options"). > Basically the SMBIOS table broke and wasn't readable anymore. > > I think we can argue if the last one is a real fix. In case you just want to > take the first two so late in the cycle, let me know and I can provide you > with a separate pull request. > > Regards, > Matthias > Applied to u-boot/master, thanks!