| Message ID | 0aed2fd9419e22448bfc9d88466eb51b7d684c70.1626694258.git.michal.simek@xilinx.com |
|---|---|
| State | Accepted |
| Commit | 15ca9ebb074e9eca5a8264c93f5678df240fa54d |
| Delegated to: | Michal Simek |
| Headers | show |
| Series | arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node | expand |
po 19. 7. 2021 v 13:31 odesÃlatel Michal Simek <michal.simek@xilinx.com> napsal: > > From: Manish Narani <manish.narani@xilinx.com> > > Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here > the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This > PHY initialization should be handled from Xilinx USB core as the > prerequisite register configurations are done here only. > > Signed-off-by: Manish Narani <manish.narani@xilinx.com> > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 4 ++-- > arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 4 ++-- > arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 8 ++++---- > arch/arm/dts/zynqmp-zcu100-revC.dts | 8 ++++---- > arch/arm/dts/zynqmp-zcu102-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu104-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu104-revC.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu106-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu111-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu208-revA.dts | 4 ++-- > arch/arm/dts/zynqmp-zcu216-revA.dts | 4 ++-- > 13 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts > index d50b335e674d..c893aaaafd8f 100644 > --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts > +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts > @@ -545,6 +545,8 @@ > status = "okay"; > xlnx,usb-polarity = <0>; > xlnx,usb-reset-mode = <0>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; > }; > > &dwc3_0 { > @@ -553,8 +555,6 @@ > snps,dis_u2_susphy_quirk; > snps,dis_u3_susphy_quirk; > maximum-speed = "super-speed"; > - phy-names = "usb3-phy"; > - phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; > }; > > &usb1 { > diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts > index 59d5751e0634..4e8086c82f23 100644 > --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts > +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts > @@ -125,6 +125,8 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > usbhub: usb5744 { /* u43 */ > compatible = "microchip,usb5744"; > reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; > @@ -135,8 +137,6 @@ > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts > index b5443afff982..048d5665c57b 100644 > --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts > +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts > @@ -109,14 +109,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts > index b92a2ee3e60a..4a87bd6a6aaf 100644 > --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts > +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts > @@ -424,14 +424,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts > index 344323ab7f93..13812470ae34 100644 > --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts > +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts > @@ -221,27 +221,27 @@ > > &usb0 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > /* ULPI SMSC USB3320 */ > &usb1 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; > }; > > &dwc3_1 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; > maximum-speed = "super-speed"; > }; > diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts > index 2d615774782f..ea630a43dc7f 100644 > --- a/arch/arm/dts/zynqmp-zcu100-revC.dts > +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts > @@ -561,13 +561,13 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "peripheral"; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; > maximum-speed = "super-speed"; > }; > > @@ -576,13 +576,13 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb1_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; > }; > > &dwc3_1 { > status = "okay"; > dr_mode = "host"; > - phy-names = "usb3-phy"; > - phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts > index 1d4a9cdc69f0..175252d2def2 100644 > --- a/arch/arm/dts/zynqmp-zcu102-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts > @@ -1035,14 +1035,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts > index 7e5eca82fdaa..9cd30447eb3e 100644 > --- a/arch/arm/dts/zynqmp-zcu104-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts > @@ -502,14 +502,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts > index f4ebcbb318b4..45191569c101 100644 > --- a/arch/arm/dts/zynqmp-zcu104-revC.dts > +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts > @@ -514,14 +514,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts > index ac6689c16730..50cc72eb9240 100644 > --- a/arch/arm/dts/zynqmp-zcu106-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts > @@ -1012,14 +1012,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts > index 8d57ca2b3bf3..2b15ce1ea847 100644 > --- a/arch/arm/dts/zynqmp-zcu111-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts > @@ -849,14 +849,14 @@ > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usb0_default>; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > > diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts > index d3e20ae85d7e..32a6e6fb55e2 100644 > --- a/arch/arm/dts/zynqmp-zcu208-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts > @@ -692,13 +692,13 @@ > /* ULPI SMSC USB3320 */ > &usb0 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts > index ae7c18196894..1e347036d0a7 100644 > --- a/arch/arm/dts/zynqmp-zcu216-revA.dts > +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts > @@ -696,13 +696,13 @@ > /* ULPI SMSC USB3320 */ > &usb0 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > status = "okay"; > dr_mode = "host"; > snps,usb3_lpm_capable; > - phy-names = "usb3-phy"; > - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; > maximum-speed = "super-speed"; > }; > -- > 2.32.0 > Applied. M
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index d50b335e674d..c893aaaafd8f 100644 --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -545,6 +545,8 @@ status = "okay"; xlnx,usb-polarity = <0>; xlnx,usb-reset-mode = <0>; + phy-names = "usb3-phy"; + phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { @@ -553,8 +555,6 @@ snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; maximum-speed = "super-speed"; - phy-names = "usb3-phy"; - phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &usb1 { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index 59d5751e0634..4e8086c82f23 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -125,6 +125,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; usbhub: usb5744 { /* u43 */ compatible = "microchip,usb5744"; reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; @@ -135,8 +137,6 @@ status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index b5443afff982..048d5665c57b 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -109,14 +109,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index b92a2ee3e60a..4a87bd6a6aaf 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -424,14 +424,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 344323ab7f93..13812470ae34 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -221,27 +221,27 @@ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 2d615774782f..ea630a43dc7f 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -561,13 +561,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; }; &dwc3_0 { status = "okay"; dr_mode = "peripheral"; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; maximum-speed = "super-speed"; }; @@ -576,13 +576,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 1d4a9cdc69f0..175252d2def2 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -1035,14 +1035,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 7e5eca82fdaa..9cd30447eb3e 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -502,14 +502,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index f4ebcbb318b4..45191569c101 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -514,14 +514,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index ac6689c16730..50cc72eb9240 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -1012,14 +1012,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 8d57ca2b3bf3..2b15ce1ea847 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -849,14 +849,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index d3e20ae85d7e..32a6e6fb55e2 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -692,13 +692,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index ae7c18196894..1e347036d0a7 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -696,13 +696,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; };