| Message ID | 20210710182137.3720-1-texier.pj2@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | configs/imx7dpico: bump Kernel and U-Boot version | expand |
On Sat, Jul 10, 2021 at 3:21 PM Pierre-Jean Texier <texier.pj2@gmail.com> wrote: > > Bump U-Boot to 2021.07 and kernel to version 5.13 > > Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Thanks for the patch: Reviewed-by: Fabio Estevam <festevam@gmail.com>
Hi Pierre-Jean, On Sat, Jul 10, 2021 at 3:27 PM Fabio Estevam <festevam@gmail.com> wrote: > > On Sat, Jul 10, 2021 at 3:21 PM Pierre-Jean Texier <texier.pj2@gmail.com> wrote: > > > > Bump U-Boot to 2021.07 and kernel to version 5.13 > > > > Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> > > Thanks for the patch: > > Reviewed-by: Fabio Estevam <festevam@gmail.com> I forgot to ask: shouldn't we pass a extlinux.conf file so that it can boot by default now as it uses distro boot in U-Boot? Thanks
Hi Fabio, Le 10/07/2021 à 20:30, Fabio Estevam a écrit : > Hi Pierre-Jean, > > On Sat, Jul 10, 2021 at 3:27 PM Fabio Estevam <festevam@gmail.com> wrote: >> >> On Sat, Jul 10, 2021 at 3:21 PM Pierre-Jean Texier <texier.pj2@gmail.com> wrote: >>> >>> Bump U-Boot to 2021.07 and kernel to version 5.13 >>> >>> Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> >> >> Thanks for the patch: >> >> Reviewed-by: Fabio Estevam <festevam@gmail.com> > > I forgot to ask: shouldn't we pass a extlinux.conf file so that it can > boot by default now > as it uses distro boot in U-Boot? In fact, extlinux file is already used for this board, introduced by Joris in commit 40c5aa ("configs/imx7dpico: Bump Linux and U-Boot") [1] See boot sequence after: U-Boot 2021.07 (Jul 10 2021 - 20:04:17 +0200) CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR Model: TechNexion PICO-IMX7D Board and PI baseboard Board: i.MX7D PICOSOM <...> mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 159 bytes read in 1 ms (155.3 KiB/s) 1: imx7d-pico-buildroot Retrieving file: /boot/zImage 9701104 bytes read in 219 ms (42.2 MiB/s) append: root=PARTUUID=00000000-01 rootwait rw console=ttymxc4,115200 Retrieving file: /boot/imx7d-pico-pi.dtb Thanks for the review ! [1] - https://git.buildroot.net/buildroot/commit/board/technexion/imx7dpico/rootfs_overlay/boot/extlinux?id=40c5aa50cf6a26b4697bb0c9bd671d89a53edf5f
Hi Pierre-Jean, On Sat, Jul 10, 2021 at 3:41 PM Pierre-Jean Texier <texier.pj2@gmail.com> wrote: > In fact, extlinux file is already used for this board, introduced by > Joris in commit 40c5aa ("configs/imx7dpico: Bump Linux and U-Boot") [1] Ah, I got confused. It is imx7d-sdb board that misses extlinux.conf. I will add extlinux.conf for imx7-sdb. Thanks > See boot sequence after: > > U-Boot 2021.07 (Jul 10 2021 - 20:04:17 +0200) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 40C > Reset cause: POR > Model: TechNexion PICO-IMX7D Board and PI baseboard > Board: i.MX7D PICOSOM > <...> > mmc0(part 0) is current device > Scanning mmc 0:1... > Found /boot/extlinux/extlinux.conf > Retrieving file: /boot/extlinux/extlinux.conf > 159 bytes read in 1 ms (155.3 KiB/s) > 1: imx7d-pico-buildroot > Retrieving file: /boot/zImage > 9701104 bytes read in 219 ms (42.2 MiB/s) > append: root=PARTUUID=00000000-01 rootwait rw console=ttymxc4,115200 > Retrieving file: /boot/imx7d-pico-pi.dtb > > > Thanks for the review ! > > [1] - > https://git.buildroot.net/buildroot/commit/board/technexion/imx7dpico/rootfs_overlay/boot/extlinux?id=40c5aa50cf6a26b4697bb0c9bd671d89a53edf5f > -- > Pierre-Jean Texier
On Sat, 10 Jul 2021 20:21:37 +0200 Pierre-Jean Texier <texier.pj2@gmail.com> wrote: > Bump U-Boot to 2021.07 and kernel to version 5.13 > > Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> > --- > configs/imx7dpico_defconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) Applied to master, thanks. Thomas
diff --git a/configs/imx7dpico_defconfig b/configs/imx7dpico_defconfig index a3c2af1641..c6ea04b683 100644 --- a/configs/imx7dpico_defconfig +++ b/configs/imx7dpico_defconfig @@ -3,8 +3,8 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -# Linux headers same as kernel, a 5.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y +# Linux headers same as kernel, a 5.13 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_13=y # system BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4" @@ -12,7 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc4" # kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.13" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-pico-pi" @@ -25,7 +25,7 @@ BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="SPL" BR2_TARGET_UBOOT_BOARDNAME="pico-pi-imx7d" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.07" BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y # wifi firmware for brcm43439
Bump U-Boot to 2021.07 and kernel to version 5.13 Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> --- configs/imx7dpico_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)