[v2] KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path

Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
FSCR. The logic explained in that patch actually applies there to the
old path well: a context switch can be made before kvmppc_vcpu_run_hv
restores the host FSCR and returns.

Now both the p9 and the p7/8 paths now save and restore their FSCR, it
no longer needs to be restored at the end of kvmppc_vcpu_run_hv

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
Since v1:
- Remove the now unnecessary FSCR restore at vcpu_run exit [Fabiano]
 arch/powerpc/kvm/book3s_hv.c            | 1 -
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

Nicholas Piggin <npiggin@gmail.com> writes:

> Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
> FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
> FSCR. The logic explained in that patch actually applies there to the
> old path well: a context switch can be made before kvmppc_vcpu_run_hv
> restores the host FSCR and returns.
>
> Now both the p9 and the p7/8 paths now save and restore their FSCR, it
> no longer needs to be restored at the end of kvmppc_vcpu_run_hv
>
> Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>

> ---
> Since v1:
> - Remove the now unnecessary FSCR restore at vcpu_run exit [Fabiano]
>  arch/powerpc/kvm/book3s_hv.c            | 1 -
>  arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +++++++
>  2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
> index 28a80d240b76..13728495ac66 100644
> --- a/arch/powerpc/kvm/book3s_hv.c
> +++ b/arch/powerpc/kvm/book3s_hv.c
> @@ -4455,7 +4455,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_vcpu *vcpu)
>  		mtspr(SPRN_EBBRR, ebb_regs[1]);
>  		mtspr(SPRN_BESCR, ebb_regs[2]);
>  		mtspr(SPRN_TAR, user_tar);
> -		mtspr(SPRN_FSCR, current->thread.fscr);
>  	}
>  	mtspr(SPRN_VRSAVE, user_vrsave);
>  
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index 5e634db4809b..004f0d4e665f 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -59,6 +59,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
>  #define STACK_SLOT_UAMOR	(SFS-88)
>  #define STACK_SLOT_DAWR1	(SFS-96)
>  #define STACK_SLOT_DAWRX1	(SFS-104)
> +#define STACK_SLOT_FSCR		(SFS-112)
>  /* the following is used by the P9 short path */
>  #define STACK_SLOT_NVGPRS	(SFS-152)	/* 18 gprs */
>  
> @@ -686,6 +687,8 @@ BEGIN_FTR_SECTION
>  	std	r6, STACK_SLOT_DAWR0(r1)
>  	std	r7, STACK_SLOT_DAWRX0(r1)
>  	std	r8, STACK_SLOT_IAMR(r1)
> +	mfspr	r5, SPRN_FSCR
> +	std	r5, STACK_SLOT_FSCR(r1)
>  END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
>  BEGIN_FTR_SECTION
>  	mfspr	r6, SPRN_DAWR1
> @@ -1663,6 +1666,10 @@ FTR_SECTION_ELSE
>  	ld	r7, STACK_SLOT_HFSCR(r1)
>  	mtspr	SPRN_HFSCR, r7
>  ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
> +BEGIN_FTR_SECTION
> +	ld	r5, STACK_SLOT_FSCR(r1)
> +	mtspr	SPRN_FSCR, r5
> +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
>  	/*
>  	 * Restore various registers to 0, where non-zero values
>  	 * set by the guest could disrupt the host.

On Wed, 26 May 2021 22:58:51 +1000, Nicholas Piggin wrote:
> Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
> FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
> FSCR. The logic explained in that patch actually applies there to the
> old path well: a context switch can be made before kvmppc_vcpu_run_hv
> restores the host FSCR and returns.
> 
> Now both the p9 and the p7/8 paths now save and restore their FSCR, it
> no longer needs to be restored at the end of kvmppc_vcpu_run_hv

Applied to powerpc/fixes.

[1/1] KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
      https://git.kernel.org/powerpc/c/1438709e6328925ef496dafd467dbd0353137434

cheers

On Wed, 26 May 2021 22:58:51 +1000, Nicholas Piggin wrote:
> Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
> FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
> FSCR. The logic explained in that patch actually applies there to the
> old path well: a context switch can be made before kvmppc_vcpu_run_hv
> restores the host FSCR and returns.
> 
> Now both the p9 and the p7/8 paths now save and restore their FSCR, it
> no longer needs to be restored at the end of kvmppc_vcpu_run_hv

Applied to powerpc/topic/ppc-kvm.

[1/1] KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
      https://git.kernel.org/powerpc/c/6ba53317d497dec029bfb040b1daf38328fa00ab

cheers