Message ID | 7409663f10a5873f9e30bc6dddd03d9872258368.1620345816.git.amodra@gmail.com |
---|---|
State | New |
Headers | show |
Series | Revert "rs6000: Avoid -fpatchable-function-entry* regressions on powerpc64 be [PR98125]" | expand |
On Fri, 2021-05-07 at 12:19 +0930, Alan Modra via Gcc-patches wrote: > This reverts commit b680b9049737198d010e49cf434704c6a6ed2b3f now > that the PowerPC64 ELFv1 regression is fixed properly. > Hi, Ok. looks like that was initially handled by Jakub, on copy, good. :-) Contents below appear to match that commit, reversed. lgtm, thanks -Will > PR testsuite/98125 > * targhooks.h (default_print_patchable_function_entry_1): Delete. > * targhooks.c (default_print_patchable_function_entry_1): Delete. > (default_print_patchable_function_entry): Expand above. > * config/rs6000/rs6000.c (TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): > Don't define. > (rs6000_print_patchable_function_entry): Delete. > * testsuite/g++.dg/pr93195a.C: Revert 2021-04-03 change. > > diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c > index 663eed4f055..d43c36e7f1a 100644 > --- a/gcc/config/rs6000/rs6000.c > +++ b/gcc/config/rs6000/rs6000.c > @@ -1362,10 +1362,6 @@ static const struct attribute_spec rs6000_attribute_table[] = > #define TARGET_ASM_ASSEMBLE_VISIBILITY rs6000_assemble_visibility > #endif > > -#undef TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY > -#define TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY \ > - rs6000_print_patchable_function_entry > - > #undef TARGET_SET_UP_BY_PROLOGUE > #define TARGET_SET_UP_BY_PROLOGUE rs6000_set_up_by_prologue > > @@ -14957,30 +14953,6 @@ rs6000_assemble_visibility (tree decl, int vis) > } > #endif > > -/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function > - entry. If RECORD_P is true and the target supports named sections, > - the location of the NOPs will be recorded in a special object section > - called "__patchable_function_entries". This routine may be called > - twice per function to put NOPs before and after the function > - entry. */ > - > -void > -rs6000_print_patchable_function_entry (FILE *file, > - unsigned HOST_WIDE_INT patch_area_size, > - bool record_p) > -{ > - unsigned int flags = SECTION_WRITE | SECTION_RELRO; > - /* When .opd section is emitted, the function symbol > - default_print_patchable_function_entry_1 is emitted into the .opd section > - while the patchable area is emitted into the function section. > - Don't use SECTION_LINK_ORDER in that case. */ > - if (!(TARGET_64BIT && DEFAULT_ABI != ABI_ELFv2) > - && HAVE_GAS_SECTION_LINK_ORDER) > - flags |= SECTION_LINK_ORDER; > - default_print_patchable_function_entry_1 (file, patch_area_size, record_p, > - flags); > -} > - > enum rtx_code > rs6000_reverse_condition (machine_mode mode, enum rtx_code code) > { > diff --git a/gcc/targhooks.c b/gcc/targhooks.c > index 952fad422eb..d69c9a2d819 100644 > --- a/gcc/targhooks.c > +++ b/gcc/targhooks.c > @@ -1832,15 +1832,17 @@ default_compare_by_pieces_branch_ratio (machine_mode) > return 1; > } > > -/* Helper for default_print_patchable_function_entry and other > - print_patchable_function_entry hook implementations. */ > +/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function > + entry. If RECORD_P is true and the target supports named sections, > + the location of the NOPs will be recorded in a special object section > + called "__patchable_function_entries". This routine may be called > + twice per function to put NOPs before and after the function > + entry. */ > > void > -default_print_patchable_function_entry_1 (FILE *file, > - unsigned HOST_WIDE_INT > - patch_area_size, > - bool record_p, > - unsigned int flags) > +default_print_patchable_function_entry (FILE *file, > + unsigned HOST_WIDE_INT patch_area_size, > + bool record_p) > { > const char *nop_templ = 0; > int code_num; > @@ -1862,6 +1864,9 @@ default_print_patchable_function_entry_1 (FILE *file, > patch_area_number++; > ASM_GENERATE_INTERNAL_LABEL (buf, "LPFE", patch_area_number); > > + unsigned int flags = SECTION_WRITE | SECTION_RELRO; > + if (HAVE_GAS_SECTION_LINK_ORDER) > + flags |= SECTION_LINK_ORDER; > switch_to_section (get_section ("__patchable_function_entries", > flags, current_function_decl)); > assemble_align (POINTER_SIZE); > @@ -1878,25 +1883,6 @@ default_print_patchable_function_entry_1 (FILE *file, > output_asm_insn (nop_templ, NULL); > } > > -/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function > - entry. If RECORD_P is true and the target supports named sections, > - the location of the NOPs will be recorded in a special object section > - called "__patchable_function_entries". This routine may be called > - twice per function to put NOPs before and after the function > - entry. */ > - > -void > -default_print_patchable_function_entry (FILE *file, > - unsigned HOST_WIDE_INT patch_area_size, > - bool record_p) > -{ > - unsigned int flags = SECTION_WRITE | SECTION_RELRO; > - if (HAVE_GAS_SECTION_LINK_ORDER) > - flags |= SECTION_LINK_ORDER; > - default_print_patchable_function_entry_1 (file, patch_area_size, record_p, > - flags); > -} > - > bool > default_profile_before_prologue (void) > { > diff --git a/gcc/targhooks.h b/gcc/targhooks.h > index 9928d064abd..39a6f82f143 100644 > --- a/gcc/targhooks.h > +++ b/gcc/targhooks.h > @@ -230,9 +230,6 @@ extern bool default_use_by_pieces_infrastructure_p (unsigned HOST_WIDE_INT, > bool); > extern int default_compare_by_pieces_branch_ratio (machine_mode); > > -extern void default_print_patchable_function_entry_1 (FILE *, > - unsigned HOST_WIDE_INT, > - bool, unsigned int); > extern void default_print_patchable_function_entry (FILE *, > unsigned HOST_WIDE_INT, > bool); > diff --git a/gcc/testsuite/g++.dg/pr93195a.C b/gcc/testsuite/g++.dg/pr93195a.C > index b14f1b3e341..26d265da74e 100644 > --- a/gcc/testsuite/g++.dg/pr93195a.C > +++ b/gcc/testsuite/g++.dg/pr93195a.C > @@ -1,5 +1,4 @@ > /* { dg-do link { target { ! { nvptx*-*-* visium-*-* } } } } */ > -/* { dg-skip-if "not supported" { { powerpc*-*-* } && lp64 } } */ > // { dg-require-effective-target o_flag_in_section } > /* { dg-options "-O0 -fpatchable-function-entry=1" } */ > /* { dg-additional-options "-fno-pie" { target sparc*-*-* } } */
On Fri, May 07, 2021 at 12:19:51PM +0930, Alan Modra wrote: > This reverts commit b680b9049737198d010e49cf434704c6a6ed2b3f now > that the PowerPC64 ELFv1 regression is fixed properly. This is okay when the rest goes in. Do it in a bisectable order if possible? If that is easy :-) Segher
diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c index 663eed4f055..d43c36e7f1a 100644 --- a/gcc/config/rs6000/rs6000.c +++ b/gcc/config/rs6000/rs6000.c @@ -1362,10 +1362,6 @@ static const struct attribute_spec rs6000_attribute_table[] = #define TARGET_ASM_ASSEMBLE_VISIBILITY rs6000_assemble_visibility #endif -#undef TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY -#define TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY \ - rs6000_print_patchable_function_entry - #undef TARGET_SET_UP_BY_PROLOGUE #define TARGET_SET_UP_BY_PROLOGUE rs6000_set_up_by_prologue @@ -14957,30 +14953,6 @@ rs6000_assemble_visibility (tree decl, int vis) } #endif -/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function - entry. If RECORD_P is true and the target supports named sections, - the location of the NOPs will be recorded in a special object section - called "__patchable_function_entries". This routine may be called - twice per function to put NOPs before and after the function - entry. */ - -void -rs6000_print_patchable_function_entry (FILE *file, - unsigned HOST_WIDE_INT patch_area_size, - bool record_p) -{ - unsigned int flags = SECTION_WRITE | SECTION_RELRO; - /* When .opd section is emitted, the function symbol - default_print_patchable_function_entry_1 is emitted into the .opd section - while the patchable area is emitted into the function section. - Don't use SECTION_LINK_ORDER in that case. */ - if (!(TARGET_64BIT && DEFAULT_ABI != ABI_ELFv2) - && HAVE_GAS_SECTION_LINK_ORDER) - flags |= SECTION_LINK_ORDER; - default_print_patchable_function_entry_1 (file, patch_area_size, record_p, - flags); -} - enum rtx_code rs6000_reverse_condition (machine_mode mode, enum rtx_code code) { diff --git a/gcc/targhooks.c b/gcc/targhooks.c index 952fad422eb..d69c9a2d819 100644 --- a/gcc/targhooks.c +++ b/gcc/targhooks.c @@ -1832,15 +1832,17 @@ default_compare_by_pieces_branch_ratio (machine_mode) return 1; } -/* Helper for default_print_patchable_function_entry and other - print_patchable_function_entry hook implementations. */ +/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function + entry. If RECORD_P is true and the target supports named sections, + the location of the NOPs will be recorded in a special object section + called "__patchable_function_entries". This routine may be called + twice per function to put NOPs before and after the function + entry. */ void -default_print_patchable_function_entry_1 (FILE *file, - unsigned HOST_WIDE_INT - patch_area_size, - bool record_p, - unsigned int flags) +default_print_patchable_function_entry (FILE *file, + unsigned HOST_WIDE_INT patch_area_size, + bool record_p) { const char *nop_templ = 0; int code_num; @@ -1862,6 +1864,9 @@ default_print_patchable_function_entry_1 (FILE *file, patch_area_number++; ASM_GENERATE_INTERNAL_LABEL (buf, "LPFE", patch_area_number); + unsigned int flags = SECTION_WRITE | SECTION_RELRO; + if (HAVE_GAS_SECTION_LINK_ORDER) + flags |= SECTION_LINK_ORDER; switch_to_section (get_section ("__patchable_function_entries", flags, current_function_decl)); assemble_align (POINTER_SIZE); @@ -1878,25 +1883,6 @@ default_print_patchable_function_entry_1 (FILE *file, output_asm_insn (nop_templ, NULL); } -/* Write PATCH_AREA_SIZE NOPs into the asm outfile FILE around a function - entry. If RECORD_P is true and the target supports named sections, - the location of the NOPs will be recorded in a special object section - called "__patchable_function_entries". This routine may be called - twice per function to put NOPs before and after the function - entry. */ - -void -default_print_patchable_function_entry (FILE *file, - unsigned HOST_WIDE_INT patch_area_size, - bool record_p) -{ - unsigned int flags = SECTION_WRITE | SECTION_RELRO; - if (HAVE_GAS_SECTION_LINK_ORDER) - flags |= SECTION_LINK_ORDER; - default_print_patchable_function_entry_1 (file, patch_area_size, record_p, - flags); -} - bool default_profile_before_prologue (void) { diff --git a/gcc/targhooks.h b/gcc/targhooks.h index 9928d064abd..39a6f82f143 100644 --- a/gcc/targhooks.h +++ b/gcc/targhooks.h @@ -230,9 +230,6 @@ extern bool default_use_by_pieces_infrastructure_p (unsigned HOST_WIDE_INT, bool); extern int default_compare_by_pieces_branch_ratio (machine_mode); -extern void default_print_patchable_function_entry_1 (FILE *, - unsigned HOST_WIDE_INT, - bool, unsigned int); extern void default_print_patchable_function_entry (FILE *, unsigned HOST_WIDE_INT, bool); diff --git a/gcc/testsuite/g++.dg/pr93195a.C b/gcc/testsuite/g++.dg/pr93195a.C index b14f1b3e341..26d265da74e 100644 --- a/gcc/testsuite/g++.dg/pr93195a.C +++ b/gcc/testsuite/g++.dg/pr93195a.C @@ -1,5 +1,4 @@ /* { dg-do link { target { ! { nvptx*-*-* visium-*-* } } } } */ -/* { dg-skip-if "not supported" { { powerpc*-*-* } && lp64 } } */ // { dg-require-effective-target o_flag_in_section } /* { dg-options "-O0 -fpatchable-function-entry=1" } */ /* { dg-additional-options "-fno-pie" { target sparc*-*-* } } */