Message ID | 20201204085835.2406541-1-atish.patra@wdc.com |
---|---|
Headers | show |
Series | Add Microchip PolarFire Soc Support | expand |
On Fri, Dec 4, 2020 at 5:05 PM Atish Patra <atish.patra@wdc.com> wrote: > > Add initial DTS for Microchip ICICLE board having only > essential devices (clocks, sdhci, ethernet, serial, etc). > The device tree is based on the U-Boot patch. > > https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/ There is a newer version of U-Boot patch. Probably needs to sync again. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > .../boot/dts/microchip/microchip-mpfs.dtsi | 331 ++++++++++++++++++ > 4 files changed, 406 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > Regards, Bin
On Fri, Dec 4, 2020 at 5:07 PM Atish Patra <atish.patra@wdc.com> wrote: > > From: Conor Dooley <conor.dooley@microchip.com> > > Add Cyril Jean and Lewis Hanly as maintainers for the Microchip SoC > directory > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- > MAINTAINERS | 8 ++++++++ > 1 file changed, 8 insertions(+) > Reviewed-by: Bin Meng <bin.meng@windriver.com>
On Fri, 04 Dec 2020 00:58:30 PST (-0800), Atish Patra wrote: > This series adds minimal support for Microchip Polar Fire Soc Icicle kit. > It is rebased on v5.10-rc6 and depends on clock support. > Only MMC and ethernet drivers are enabled via this series. > The idea here is to add the foundational patches so that other drivers > can be added to on top of this. The device tree may change based on > feedback on bindings of individual driver support patches. > > This series has been tested on Qemu and Polar Fire Soc Icicle kit. > The following qemu series is necessary to test it on Qemu. > > The series can also be found at. > https://github.com/atishp04/linux/tree/polarfire_support_upstream_v3 > > I noticed the latest version of mmc driver[2] hangs on the board with > the latest clock driver. That's why, I have tested with the old clock > driver available in the above github repo. IIRC the previous version was an RFC, but this is a PATCH. I'd be generally happy to take it on for-next, but I don't want to merge something that doesn't boot and that I don't have any way to fix (I don't have one of the boards yet). > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html > [2] https://www.spinics.net/lists/devicetree/msg383626.html > > Changes from v2->v3: > 1. Fixed a typo in dt binding. > 2. Included MAINTAINERS entry for PolarFire SoC. > 3. Improved the dts file by using lowercase clock names and keeping phy > details in board specific dts file. > > Changes from v1->v2: > 1. Modified the DT to match the device tree in U-Boot. > 2. Added both eMMC & SDcard entries in DT. However, SD card is only enabled > as it allows larger storage option for linux distros. > > Atish Patra (4): > RISC-V: Add Microchip PolarFire SoC kconfig option > dt-bindings: riscv: microchip: Add YAML documentation for the > PolarFire SoC > RISC-V: Initial DTS for Microchip ICICLE board > RISC-V: Enable Microchip PolarFire ICICLE SoC > > Conor Dooley (1): > MAINTAINERS: add microchip polarfire soc support > > .../devicetree/bindings/riscv/microchip.yaml | 28 ++ > MAINTAINERS | 8 + > arch/riscv/Kconfig.socs | 7 + > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > .../boot/dts/microchip/microchip-mpfs.dtsi | 331 ++++++++++++++++++ > arch/riscv/configs/defconfig | 4 + > 8 files changed, 453 insertions(+) > create mode 100644 Documentation/devicetree/bindings/riscv/microchip.yaml > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
On Mon, Dec 21, 2020 at 7:19 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > On Fri, 04 Dec 2020 00:58:30 PST (-0800), Atish Patra wrote: > > This series adds minimal support for Microchip Polar Fire Soc Icicle kit. > > It is rebased on v5.10-rc6 and depends on clock support. > > Only MMC and ethernet drivers are enabled via this series. > > The idea here is to add the foundational patches so that other drivers > > can be added to on top of this. The device tree may change based on > > feedback on bindings of individual driver support patches. > > > > This series has been tested on Qemu and Polar Fire Soc Icicle kit. > > The following qemu series is necessary to test it on Qemu. > > > > The series can also be found at. > > https://github.com/atishp04/linux/tree/polarfire_support_upstream_v3 > > > > I noticed the latest version of mmc driver[2] hangs on the board with > > the latest clock driver. That's why, I have tested with the old clock > > driver available in the above github repo. > > IIRC the previous version was an RFC, but this is a PATCH. I'd be generally > happy to take it on for-next, but I don't want to merge something that doesn't > boot and that I don't have any way to fix (I don't have one of the boards yet). > Fair enough. We can wait for clock patches to be merged before merging this series. > > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html > > [2] https://www.spinics.net/lists/devicetree/msg383626.html > > > > Changes from v2->v3: > > 1. Fixed a typo in dt binding. > > 2. Included MAINTAINERS entry for PolarFire SoC. > > 3. Improved the dts file by using lowercase clock names and keeping phy > > details in board specific dts file. > > > > Changes from v1->v2: > > 1. Modified the DT to match the device tree in U-Boot. > > 2. Added both eMMC & SDcard entries in DT. However, SD card is only enabled > > as it allows larger storage option for linux distros. > > > > Atish Patra (4): > > RISC-V: Add Microchip PolarFire SoC kconfig option > > dt-bindings: riscv: microchip: Add YAML documentation for the > > PolarFire SoC > > RISC-V: Initial DTS for Microchip ICICLE board > > RISC-V: Enable Microchip PolarFire ICICLE SoC > > > > Conor Dooley (1): > > MAINTAINERS: add microchip polarfire soc support > > > > .../devicetree/bindings/riscv/microchip.yaml | 28 ++ > > MAINTAINERS | 8 + > > arch/riscv/Kconfig.socs | 7 + > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > > .../boot/dts/microchip/microchip-mpfs.dtsi | 331 ++++++++++++++++++ > > arch/riscv/configs/defconfig | 4 + > > 8 files changed, 453 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/riscv/microchip.yaml > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv @Daire McNamara Do you have a v2 of the clock patch series that works with the latest upstream.
On 2020-12-04 00:58, Atish Patra wrote: > Enable Microchip PolarFire ICICLE soc config in defconfig. > It allows the default upstream kernel to boot on PolarFire ICICLE board. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > Reviewed-by: Anup Patel <anup@brainfault.org> > Reviewed-by: Bin Meng <bin.meng@windriver.com> > --- > arch/riscv/configs/defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index d222d353d86d..2660fa05451e 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -16,6 +16,7 @@ CONFIG_EXPERT=y > CONFIG_BPF_SYSCALL=y > CONFIG_SOC_SIFIVE=y > CONFIG_SOC_VIRT=y > +CONFIG_SOC_MICROCHIP_POLARFIRE=y > CONFIG_SMP=y > CONFIG_JUMP_LABEL=y > CONFIG_MODULES=y > @@ -79,6 +80,9 @@ CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_HCD_PLATFORM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_UAS=y > +CONFIG_SDHCI=y I guess this should be CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_CADENCE=y > CONFIG_MMC=y > CONFIG_MMC_SPI=y > CONFIG_RTC_CLASS=y Regards, Aurelien
Hi Atish, On 12/4/20 8:58 AM, Atish Patra wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Add Microchip PolarFire kconfig option which selects SoC specific > and common drivers that is required for this SoC. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > Reviewed-by: Bin Meng <bin.meng@windriver.com> > Reviewed-by: Anup Patel <anup@brainfault.org> > --- > arch/riscv/Kconfig.socs | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs > index 8a55f6156661..148ab095966b 100644 > --- a/arch/riscv/Kconfig.socs > +++ b/arch/riscv/Kconfig.socs > @@ -1,5 +1,12 @@ > menu "SoC selection" > > +config SOC_MICROCHIP_POLARFIRE > + bool "Microchip PolarFire SoCs" > + select MCHP_CLK_PFSOC Can you change MCHP_CLK_PFSOC to MCHP_CLK_MPFS to align with the v2 clock driver? > + select SIFIVE_PLIC > + help > + This enables support for Microchip PolarFire SoC platforms. > + > config SOC_SIFIVE > bool "SiFive SoCs" > select SERIAL_SIFIVE if TTY > -- > 2.25.1 > Regards, Cyril.
Hi Atish, On 12/4/20 8:58 AM, Atish Patra wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Add initial DTS for Microchip ICICLE board having only > essential devices (clocks, sdhci, ethernet, serial, etc). > The device tree is based on the U-Boot patch. > > https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/ > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > .../boot/dts/microchip/microchip-mpfs.dtsi | 331 ++++++++++++++++++ > 4 files changed, 406 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ca1f8cbd78c0..3ea94ea0a18a 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > subdir-y += sifive > subdir-y += kendryte > +subdir-y += microchip > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > new file mode 100644 > index 000000000000..622b12771fd3 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > new file mode 100644 > index 000000000000..5b51dad13c72 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +#include "microchip-mpfs.dtsi" > + > +/* Clock frequency (in Hz) of the rtcclk */ > +#define RTCCLK_FREQ 1000000 > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC Icicle Kit"; > + compatible = "microchip,mpfs-icicle-kit", "microchip,polarfire-soc"; > + > + chosen { > + stdout-path = &serial0; > + }; > + > + cpus { > + timebase-frequency = <RTCCLK_FREQ>; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; > + clocks = <&clkcfg 26>; > + }; > + > + soc { > + }; > +}; > + > +&serial0 { > + status = "okay"; > +}; > + > +&serial1 { > + status = "okay"; > +}; > + > +&serial2 { > + status = "okay"; > +}; > + > +&serial3 { > + status = "okay"; > +}; > + > +&sdcard { > + status = "okay"; > +}; > + > +&emac0 { > + phy-mode = "sgmii"; > + phy-handle = <&phy0>; > + phy0: ethernet-phy@8 { > + reg = <8>; > + ti,fifo-depth = <0x01>; > + }; > +}; > + > +&emac1 { > + status = "okay"; > + phy-mode = "sgmii"; > + phy-handle = <&phy1>; > + phy1: ethernet-phy@9 { > + reg = <9>; > + ti,fifo-depth = <0x01>; > + }; > +}; > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > new file mode 100644 > index 000000000000..7a076aa4c78d > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > @@ -0,0 +1,331 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC"; > + compatible = "microchip,polarfire-soc"; > + > + chosen { > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <128>; > + i-cache-size = <16384>; > + reg = <0>; > + riscv,isa = "rv64imac"; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@1 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <1>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@2 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <2>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@3 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <3>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@4 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <4>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + cpu4_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + }; > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + cache-controller@2010000 { > + compatible = "sifive,fu540-c000-ccache", "cache"; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <1024>; > + cache-size = <2097152>; > + cache-unified; > + interrupt-parent = <&plic>; > + interrupts = <1 2 3>; > + reg = <0x0 0x2010000 0x0 0x1000>; > + }; > + > + clint@2000000 { > + compatible = "riscv,clint0"; > + reg = <0x0 0x2000000 0x0 0xC000>; > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > + &cpu1_intc 3 &cpu1_intc 7 > + &cpu2_intc 3 &cpu2_intc 7 > + &cpu3_intc 3 &cpu3_intc 7 > + &cpu4_intc 3 &cpu4_intc 7>; > + }; > + > + plic: interrupt-controller@c000000 { > + #interrupt-cells = <1>; > + compatible = "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + riscv,ndev = <186>; > + interrupt-controller; > + interrupts-extended = <&cpu0_intc 11 > + &cpu1_intc 11 &cpu1_intc 9 > + &cpu2_intc 11 &cpu2_intc 9 > + &cpu3_intc 11 &cpu3_intc 9 > + &cpu4_intc 11 &cpu4_intc 9>; > + }; > + > + dma@3000000 { > + compatible = "sifive,fu540-c000-pdma"; > + reg = <0x0 0x3000000 0x0 0x8000>; > + interrupt-parent = <&plic>; > + interrupts = <23 24 25 26 27 28 29 30>; > + #dma-cells = <1>; > + }; > + > + refclk: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; > + > + clkcfg: clkcfg@20002000 { > + compatible = "microchip,pfsoc-clkcfg"; Can you please change "microchip,pfsoc-clkcfg" to "microchip,mpfs-clkcfg" to align with the v2 clock driver? > + reg = <0x0 0x20002000 0x0 0x1000>; > + reg-names = "mss_sysreg"; > + clocks = <&refclk>; > + #clock-cells = <1>; > + clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ > + "mac0", "mac1", "mmc", "timer", /* 4-7 */ > + "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ > + "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ > + "i2c1", "can0", "can1", "usb", /* 16-19 */ > + "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */ > + "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */ > + "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ > + }; > + > + serial0: serial@20000000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20000000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <90>; > + current-speed = <115200>; > + clocks = <&clkcfg 8>; > + status = "disabled"; > + }; > + > + serial1: serial@20100000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20100000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <91>; > + current-speed = <115200>; > + clocks = <&clkcfg 9>; > + status = "disabled"; > + }; > + > + serial2: serial@20102000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20102000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <92>; > + current-speed = <115200>; > + clocks = <&clkcfg 10>; > + status = "disabled"; > + }; > + > + serial3: serial@20104000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20104000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <93>; > + current-speed = <115200>; > + clocks = <&clkcfg 11>; > + status = "disabled"; > + }; > + > + emmc: mmc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88 89>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + cap-mmc-highspeed; > + mmc-ddr-3_3v; > + max-frequency = <200000000>; > + non-removable; > + no-sd; > + no-sdio; > + voltage-ranges = <3300 3300>; > + status = "disabled"; > + }; > + > + sdcard: sdhc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + disable-wp; > + no-1-8-v; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + status = "disabled"; > + }; > + > + emac0: ethernet@20110000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20110000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <64 65 66 67>; > + local-mac-address = [00 00 00 00 00 00]; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + clock-names = "pclk", "hclk"; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + emac1: ethernet@20112000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20112000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <70 71 72 73>; > + mac-address = [00 00 00 00 00 00]; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + status = "disabled"; > + clock-names = "pclk", "hclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + }; > +}; > -- > 2.25.1 > Regards, Cyril
On Thu, Jan 7, 2021 at 3:40 AM <Cyril.Jean@microchip.com> wrote: > > Hi Atish, > > On 12/4/20 8:58 AM, Atish Patra wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > Add Microchip PolarFire kconfig option which selects SoC specific > > and common drivers that is required for this SoC. > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > Reviewed-by: Bin Meng <bin.meng@windriver.com> > > Reviewed-by: Anup Patel <anup@brainfault.org> > > --- > > arch/riscv/Kconfig.socs | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs > > index 8a55f6156661..148ab095966b 100644 > > --- a/arch/riscv/Kconfig.socs > > +++ b/arch/riscv/Kconfig.socs > > @@ -1,5 +1,12 @@ > > menu "SoC selection" > > > > +config SOC_MICROCHIP_POLARFIRE > > + bool "Microchip PolarFire SoCs" > > + select MCHP_CLK_PFSOC > Can you change MCHP_CLK_PFSOC to MCHP_CLK_MPFS to align with the v2 > clock driver? Sure. Will do that. > > + select SIFIVE_PLIC > > + help > > + This enables support for Microchip PolarFire SoC platforms. > > + > > config SOC_SIFIVE > > bool "SiFive SoCs" > > select SERIAL_SIFIVE if TTY > > -- > > 2.25.1 > > > Regards, > > Cyril. > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
On Thu, Jan 7, 2021 at 3:44 AM <Cyril.Jean@microchip.com> wrote: > > Hi Atish, > > On 12/4/20 8:58 AM, Atish Patra wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > Add initial DTS for Microchip ICICLE board having only > > essential devices (clocks, sdhci, ethernet, serial, etc). > > The device tree is based on the U-Boot patch. > > > > https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/ > > > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > > --- > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > > .../boot/dts/microchip/microchip-mpfs.dtsi | 331 ++++++++++++++++++ > > 4 files changed, 406 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > > index ca1f8cbd78c0..3ea94ea0a18a 100644 > > --- a/arch/riscv/boot/dts/Makefile > > +++ b/arch/riscv/boot/dts/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > subdir-y += sifive > > subdir-y += kendryte > > +subdir-y += microchip > > > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > > new file mode 100644 > > index 000000000000..622b12771fd3 > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/Makefile > > @@ -0,0 +1,2 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb > > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > > new file mode 100644 > > index 000000000000..5b51dad13c72 > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > > @@ -0,0 +1,72 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* Copyright (c) 2020 Microchip Technology Inc */ > > + > > +/dts-v1/; > > + > > +#include "microchip-mpfs.dtsi" > > + > > +/* Clock frequency (in Hz) of the rtcclk */ > > +#define RTCCLK_FREQ 1000000 > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "Microchip PolarFire-SoC Icicle Kit"; > > + compatible = "microchip,mpfs-icicle-kit", "microchip,polarfire-soc"; > > + > > + chosen { > > + stdout-path = &serial0; > > + }; > > + > > + cpus { > > + timebase-frequency = <RTCCLK_FREQ>; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x0 0x80000000 0x0 0x40000000>; > > + clocks = <&clkcfg 26>; > > + }; > > + > > + soc { > > + }; > > +}; > > + > > +&serial0 { > > + status = "okay"; > > +}; > > + > > +&serial1 { > > + status = "okay"; > > +}; > > + > > +&serial2 { > > + status = "okay"; > > +}; > > + > > +&serial3 { > > + status = "okay"; > > +}; > > + > > +&sdcard { > > + status = "okay"; > > +}; > > + > > +&emac0 { > > + phy-mode = "sgmii"; > > + phy-handle = <&phy0>; > > + phy0: ethernet-phy@8 { > > + reg = <8>; > > + ti,fifo-depth = <0x01>; > > + }; > > +}; > > + > > +&emac1 { > > + status = "okay"; > > + phy-mode = "sgmii"; > > + phy-handle = <&phy1>; > > + phy1: ethernet-phy@9 { > > + reg = <9>; > > + ti,fifo-depth = <0x01>; > > + }; > > +}; > > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > new file mode 100644 > > index 000000000000..7a076aa4c78d > > --- /dev/null > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > @@ -0,0 +1,331 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* Copyright (c) 2020 Microchip Technology Inc */ > > + > > +/dts-v1/; > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + model = "Microchip PolarFire-SoC"; > > + compatible = "microchip,polarfire-soc"; > > + > > + chosen { > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu@0 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <128>; > > + i-cache-size = <16384>; > > + reg = <0>; > > + riscv,isa = "rv64imac"; > > + status = "disabled"; > > + > > + cpu0_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@1 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <1>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu1_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@2 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <2>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu2_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@3 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <3>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + > > + cpu3_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + > > + cpu@4 { > > + clock-frequency = <0>; > > + compatible = "sifive,rocket0", "riscv"; > > + d-cache-block-size = <64>; > > + d-cache-sets = <64>; > > + d-cache-size = <32768>; > > + d-tlb-sets = <1>; > > + d-tlb-size = <32>; > > + device_type = "cpu"; > > + i-cache-block-size = <64>; > > + i-cache-sets = <64>; > > + i-cache-size = <32768>; > > + i-tlb-sets = <1>; > > + i-tlb-size = <32>; > > + mmu-type = "riscv,sv39"; > > + reg = <4>; > > + riscv,isa = "rv64imafdc"; > > + tlb-split; > > + status = "okay"; > > + cpu4_intc: interrupt-controller { > > + #interrupt-cells = <1>; > > + compatible = "riscv,cpu-intc"; > > + interrupt-controller; > > + }; > > + }; > > + }; > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + ranges; > > + > > + cache-controller@2010000 { > > + compatible = "sifive,fu540-c000-ccache", "cache"; > > + cache-block-size = <64>; > > + cache-level = <2>; > > + cache-sets = <1024>; > > + cache-size = <2097152>; > > + cache-unified; > > + interrupt-parent = <&plic>; > > + interrupts = <1 2 3>; > > + reg = <0x0 0x2010000 0x0 0x1000>; > > + }; > > + > > + clint@2000000 { > > + compatible = "riscv,clint0"; > > + reg = <0x0 0x2000000 0x0 0xC000>; > > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > > + &cpu1_intc 3 &cpu1_intc 7 > > + &cpu2_intc 3 &cpu2_intc 7 > > + &cpu3_intc 3 &cpu3_intc 7 > > + &cpu4_intc 3 &cpu4_intc 7>; > > + }; > > + > > + plic: interrupt-controller@c000000 { > > + #interrupt-cells = <1>; > > + compatible = "sifive,plic-1.0.0"; > > + reg = <0x0 0xc000000 0x0 0x4000000>; > > + riscv,ndev = <186>; > > + interrupt-controller; > > + interrupts-extended = <&cpu0_intc 11 > > + &cpu1_intc 11 &cpu1_intc 9 > > + &cpu2_intc 11 &cpu2_intc 9 > > + &cpu3_intc 11 &cpu3_intc 9 > > + &cpu4_intc 11 &cpu4_intc 9>; > > + }; > > + > > + dma@3000000 { > > + compatible = "sifive,fu540-c000-pdma"; > > + reg = <0x0 0x3000000 0x0 0x8000>; > > + interrupt-parent = <&plic>; > > + interrupts = <23 24 25 26 27 28 29 30>; > > + #dma-cells = <1>; > > + }; > > + > > + refclk: refclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <600000000>; > > + clock-output-names = "msspllclk"; > > + }; > > + > > + clkcfg: clkcfg@20002000 { > > + compatible = "microchip,pfsoc-clkcfg"; > > Can you please change "microchip,pfsoc-clkcfg" to > "microchip,mpfs-clkcfg" to align with the v2 clock driver? > Sure. > > > + reg = <0x0 0x20002000 0x0 0x1000>; > > + reg-names = "mss_sysreg"; > > + clocks = <&refclk>; > > + #clock-cells = <1>; > > + clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ > > + "mac0", "mac1", "mmc", "timer", /* 4-7 */ > > + "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ > > + "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ > > + "i2c1", "can0", "can1", "usb", /* 16-19 */ > > + "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */ > > + "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */ > > + "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ > > + }; > > + > > + serial0: serial@20000000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20000000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <90>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 8>; > > + status = "disabled"; > > + }; > > + > > + serial1: serial@20100000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20100000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <91>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 9>; > > + status = "disabled"; > > + }; > > + > > + serial2: serial@20102000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20102000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <92>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 10>; > > + status = "disabled"; > > + }; > > + > > + serial3: serial@20104000 { > > + compatible = "ns16550a"; > > + reg = <0x0 0x20104000 0x0 0x400>; > > + reg-io-width = <4>; > > + reg-shift = <2>; > > + interrupt-parent = <&plic>; > > + interrupts = <93>; > > + current-speed = <115200>; > > + clocks = <&clkcfg 11>; > > + status = "disabled"; > > + }; > > + > > + emmc: mmc@20008000 { > > + compatible = "cdns,sd4hc"; > > + reg = <0x0 0x20008000 0x0 0x1000>; > > + interrupt-parent = <&plic>; > > + interrupts = <88 89>; > > + pinctrl-names = "default"; > > + clocks = <&clkcfg 6>; > > + bus-width = <4>; > > + cap-mmc-highspeed; > > + mmc-ddr-3_3v; > > + max-frequency = <200000000>; > > + non-removable; > > + no-sd; > > + no-sdio; > > + voltage-ranges = <3300 3300>; > > + status = "disabled"; > > + }; > > + > > + sdcard: sdhc@20008000 { > > + compatible = "cdns,sd4hc"; > > + reg = <0x0 0x20008000 0x0 0x1000>; > > + interrupt-parent = <&plic>; > > + interrupts = <88>; > > + pinctrl-names = "default"; > > + clocks = <&clkcfg 6>; > > + bus-width = <4>; > > + disable-wp; > > + no-1-8-v; > > + cap-mmc-highspeed; > > + cap-sd-highspeed; > > + card-detect-delay = <200>; > > + sd-uhs-sdr12; > > + sd-uhs-sdr25; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + max-frequency = <200000000>; > > + status = "disabled"; > > + }; > > + > > + emac0: ethernet@20110000 { > > + compatible = "cdns,macb"; > > + reg = <0x0 0x20110000 0x0 0x2000>; > > + interrupt-parent = <&plic>; > > + interrupts = <64 65 66 67>; > > + local-mac-address = [00 00 00 00 00 00]; > > + clocks = <&clkcfg 5>, <&clkcfg 2>; > > + clock-names = "pclk", "hclk"; > > + status = "disabled"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > + > > + emac1: ethernet@20112000 { > > + compatible = "cdns,macb"; > > + reg = <0x0 0x20112000 0x0 0x2000>; > > + interrupt-parent = <&plic>; > > + interrupts = <70 71 72 73>; > > + mac-address = [00 00 00 00 00 00]; > > + clocks = <&clkcfg 5>, <&clkcfg 2>; > > + status = "disabled"; > > + clock-names = "pclk", "hclk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > + > > + }; > > +}; > > -- > > 2.25.1 > > > Regards, > > Cyril > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv