Message ID | 20201002055112.8977-1-a.heider@gmail.com |
---|---|
State | Accepted |
Commit | 559ae35c96794446a792d1927def38e517712278 |
Delegated to: | Stefan Roese |
Headers | show |
Series | [v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings | expand |
CCing Heinrich, I think you should be interested in this patch. On Friday 02 October 2020 07:51:12 Andre Heider wrote: > Fix the actual board vendor and ease synching dts files from Linux. > > Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> > --- > v3: rebase on master > > arch/arm/dts/armada-3720-espressobin.dts | 4 ++-- > board/Marvell/mvebu_armada-37xx/board.c | 8 ++++---- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts > index 4534f5ff29..be67a45870 100644 > --- a/arch/arm/dts/armada-3720-espressobin.dts > +++ b/arch/arm/dts/armada-3720-espressobin.dts > @@ -50,8 +50,8 @@ > #include "armada-372x.dtsi" > > / { > - model = "Marvell Armada 3720 Community Board ESPRESSOBin"; > - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; > + model = "Globalscale Marvell ESPRESSOBin Board"; > + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; > > chosen { > stdout-path = "serial0:115200n8"; > diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c > index 2bfc7171c4..73d69e0388 100644 > --- a/board/Marvell/mvebu_armada-37xx/board.c > +++ b/board/Marvell/mvebu_armada-37xx/board.c > @@ -88,14 +88,14 @@ int board_late_init(void) > if (env_get("fdtfile")) > return 0; > > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* If the memory controller has been configured for DDR4, we're running on v7 */ > ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) > & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; > > - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc"); > + emmc = of_machine_is_compatible("globalscale,espressobin-emmc"); > > if (ddr4 && emmc) > env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); > @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr, > /* Bring-up board-specific network stuff */ > int board_network_enable(struct mii_dev *bus) > { > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* > @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) > int part_off; > > /* Fill SPI MTD partitions for Linux kernel on Espressobin */ > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor"); > -- > 2.28.0 >
On 02.10.20 07:51, Andre Heider wrote: > Fix the actual board vendor and ease synching dts files from Linux. > > Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Thanks, Stefan > --- > v3: rebase on master > > arch/arm/dts/armada-3720-espressobin.dts | 4 ++-- > board/Marvell/mvebu_armada-37xx/board.c | 8 ++++---- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts > index 4534f5ff29..be67a45870 100644 > --- a/arch/arm/dts/armada-3720-espressobin.dts > +++ b/arch/arm/dts/armada-3720-espressobin.dts > @@ -50,8 +50,8 @@ > #include "armada-372x.dtsi" > > / { > - model = "Marvell Armada 3720 Community Board ESPRESSOBin"; > - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; > + model = "Globalscale Marvell ESPRESSOBin Board"; > + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; > > chosen { > stdout-path = "serial0:115200n8"; > diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c > index 2bfc7171c4..73d69e0388 100644 > --- a/board/Marvell/mvebu_armada-37xx/board.c > +++ b/board/Marvell/mvebu_armada-37xx/board.c > @@ -88,14 +88,14 @@ int board_late_init(void) > if (env_get("fdtfile")) > return 0; > > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* If the memory controller has been configured for DDR4, we're running on v7 */ > ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) > & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; > > - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc"); > + emmc = of_machine_is_compatible("globalscale,espressobin-emmc"); > > if (ddr4 && emmc) > env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); > @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr, > /* Bring-up board-specific network stuff */ > int board_network_enable(struct mii_dev *bus) > { > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* > @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) > int part_off; > > /* Fill SPI MTD partitions for Linux kernel on Espressobin */ > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor"); > Viele Grüße, Stefan
On 02.10.20 07:51, Andre Heider wrote: > Fix the actual board vendor and ease synching dts files from Linux. > > Signed-off-by: Andre Heider <a.heider@gmail.com> > --- > v3: rebase on master Applied to u-boot-marvell/master Thanks, Stefan > arch/arm/dts/armada-3720-espressobin.dts | 4 ++-- > board/Marvell/mvebu_armada-37xx/board.c | 8 ++++---- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts > index 4534f5ff29..be67a45870 100644 > --- a/arch/arm/dts/armada-3720-espressobin.dts > +++ b/arch/arm/dts/armada-3720-espressobin.dts > @@ -50,8 +50,8 @@ > #include "armada-372x.dtsi" > > / { > - model = "Marvell Armada 3720 Community Board ESPRESSOBin"; > - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; > + model = "Globalscale Marvell ESPRESSOBin Board"; > + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; > > chosen { > stdout-path = "serial0:115200n8"; > diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c > index 2bfc7171c4..73d69e0388 100644 > --- a/board/Marvell/mvebu_armada-37xx/board.c > +++ b/board/Marvell/mvebu_armada-37xx/board.c > @@ -88,14 +88,14 @@ int board_late_init(void) > if (env_get("fdtfile")) > return 0; > > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* If the memory controller has been configured for DDR4, we're running on v7 */ > ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) > & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; > > - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc"); > + emmc = of_machine_is_compatible("globalscale,espressobin-emmc"); > > if (ddr4 && emmc) > env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); > @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr, > /* Bring-up board-specific network stuff */ > int board_network_enable(struct mii_dev *bus) > { > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > /* > @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) > int part_off; > > /* Fill SPI MTD partitions for Linux kernel on Espressobin */ > - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) > + if (!of_machine_is_compatible("globalscale,espressobin")) > return 0; > > spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor"); > Viele Grüße, Stefan
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index 4534f5ff29..be67a45870 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -50,8 +50,8 @@ #include "armada-372x.dtsi" / { - model = "Marvell Armada 3720 Community Board ESPRESSOBin"; - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; + model = "Globalscale Marvell ESPRESSOBin Board"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; chosen { stdout-path = "serial0:115200n8"; diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c index 2bfc7171c4..73d69e0388 100644 --- a/board/Marvell/mvebu_armada-37xx/board.c +++ b/board/Marvell/mvebu_armada-37xx/board.c @@ -88,14 +88,14 @@ int board_late_init(void) if (env_get("fdtfile")) return 0; - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) + if (!of_machine_is_compatible("globalscale,espressobin")) return 0; /* If the memory controller has been configured for DDR4, we're running on v7 */ ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc"); + emmc = of_machine_is_compatible("globalscale,espressobin-emmc"); if (ddr4 && emmc) env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr, /* Bring-up board-specific network stuff */ int board_network_enable(struct mii_dev *bus) { - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) + if (!of_machine_is_compatible("globalscale,espressobin")) return 0; /* @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) int part_off; /* Fill SPI MTD partitions for Linux kernel on Espressobin */ - if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) + if (!of_machine_is_compatible("globalscale,espressobin")) return 0; spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
Fix the actual board vendor and ease synching dts files from Linux. Signed-off-by: Andre Heider <a.heider@gmail.com> --- v3: rebase on master arch/arm/dts/armada-3720-espressobin.dts | 4 ++-- board/Marvell/mvebu_armada-37xx/board.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-)