diff mbox series

net: dsa: rtl8366rb: Support setting MTU

Message ID 20200905215914.77640-1-linus.walleij@linaro.org
State Accepted
Delegated to: David Miller
Headers show
Series net: dsa: rtl8366rb: Support setting MTU | expand

Commit Message

Linus Walleij Sept. 5, 2020, 9:59 p.m. UTC
This implements the missing MTU setting for the RTL8366RB
switch.

Apart from supporting jumboframes, this rids us of annoying
boot messages like this:
realtek-smi switch: nonfatal error -95 setting MTU on port 0

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/net/dsa/rtl8366rb.c | 38 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

Comments

Florian Fainelli Sept. 6, 2020, 1:58 a.m. UTC | #1
On 9/5/2020 2:59 PM, Linus Walleij wrote:
> This implements the missing MTU setting for the RTL8366RB
> switch.
> 
> Apart from supporting jumboframes, this rids us of annoying
> boot messages like this:
> realtek-smi switch: nonfatal error -95 setting MTU on port 0
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Jakub Kicinski Sept. 6, 2020, 5:31 p.m. UTC | #2
On Sat, 5 Sep 2020 18:58:08 -0700 Florian Fainelli wrote:
> On 9/5/2020 2:59 PM, Linus Walleij wrote:
> > This implements the missing MTU setting for the RTL8366RB
> > switch.
> > 
> > Apart from supporting jumboframes, this rids us of annoying
> > boot messages like this:
> > realtek-smi switch: nonfatal error -95 setting MTU on port 0
> > 
> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org>  
> 
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index 48f1ff746799..f763f93f600f 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -35,7 +35,7 @@ 
 #define RTL8366RB_SGCR_MAX_LENGTH_1522		RTL8366RB_SGCR_MAX_LENGTH(0x0)
 #define RTL8366RB_SGCR_MAX_LENGTH_1536		RTL8366RB_SGCR_MAX_LENGTH(0x1)
 #define RTL8366RB_SGCR_MAX_LENGTH_1552		RTL8366RB_SGCR_MAX_LENGTH(0x2)
-#define RTL8366RB_SGCR_MAX_LENGTH_9216		RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_MAX_LENGTH_16000		RTL8366RB_SGCR_MAX_LENGTH(0x3)
 #define RTL8366RB_SGCR_EN_VLAN			BIT(13)
 #define RTL8366RB_SGCR_EN_VLAN_4KTB		BIT(14)
 
@@ -1077,6 +1077,40 @@  rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 	rb8366rb_set_port_led(smi, port, false);
 }
 
+static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct realtek_smi *smi = ds->priv;
+	u32 len;
+
+	/* The first setting, 1522 bytes, is max IP packet 1500 bytes,
+	 * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes.
+	 * This function should consider the parameter an SDU, so the
+	 * MTU passed for this setting is 1518 bytes. The same logic
+	 * of subtracting the DSA tag of 4 bytes apply to the other
+	 * settings.
+	 */
+	if (new_mtu <= 1518)
+		len = RTL8366RB_SGCR_MAX_LENGTH_1522;
+	else if (new_mtu > 1518 && new_mtu <= 1532)
+		len = RTL8366RB_SGCR_MAX_LENGTH_1536;
+	else if (new_mtu > 1532 && new_mtu <= 1548)
+		len = RTL8366RB_SGCR_MAX_LENGTH_1552;
+	else
+		len = RTL8366RB_SGCR_MAX_LENGTH_16000;
+
+	return regmap_update_bits(smi->map, RTL8366RB_SGCR,
+				  RTL8366RB_SGCR_MAX_LENGTH_MASK,
+				  len);
+}
+
+static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port)
+{
+	/* The max MTU is 16000 bytes, so we subtract the CPU tag
+	 * and the max presented to the system is 15996 bytes.
+	 */
+	return 15996;
+}
+
 static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid,
 				 struct rtl8366_vlan_4k *vlan4k)
 {
@@ -1415,6 +1449,8 @@  static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.port_vlan_del = rtl8366_vlan_del,
 	.port_enable = rtl8366rb_port_enable,
 	.port_disable = rtl8366rb_port_disable,
+	.port_change_mtu = rtl8366rb_change_mtu,
+	.port_max_mtu = rtl8366rb_max_mtu,
 };
 
 static const struct realtek_smi_ops rtl8366rb_smi_ops = {