Message ID | 20200805171431.5737-1-lokeshvutla@ti.com |
---|---|
Headers | show |
Series | arm: mach-k3: Initial support for Texas Instrument's J7200 Platform | expand |
On 05/08/20 10:44 pm, Lokesh Vutla wrote: > This series adds initial support for latest new SoC, J7200, from Texas Instruments. > > The J7200 SoC is a part of the K3 Multicore SoC architecture platform. > It is targeted for for automotive gateway, vehicle compute systems, > Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. > The SoC aims to meet the complex processing needs of modern embedded products. > > See J7200 Technical Reference Manual (SPRUIU1, June 2020) > for further details: https://www.ti.com/lit/pdf/spruiu1 Series should have been tagged v3 :) Thanks and regards, Lokesh > > Changes since v2: > - Rebased on top of latest master > - Addressed comments form Suman and Vignesh > > Changes since v1: > - Updated compatible for sdhci > - Enabled CONFIG_OF_BOARD_SETUP for fixuping up msmc dt node. > - Split R5 dts and A72 dts > > Dave Gerlach (1): > arm: dts: k3-j7200: Add R5 specific dts support > > Jean-Jacques Hiblot (1): > arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled > > Kishon Vijay Abraham I (1): > soc: soc_ti_k3: Add device identification for J7200 SoC > > Lokesh Vutla (15): > board: ti: board_detect: Add stub functions for EEPROM detection apis > board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is > defined > arm: mach-k3: Move mmr_unlock to a common location > arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image > arm: mach-k3: j721e: Add detection for j721e > arm: mach-k3: j721e: Fix unlocking control module registers > arm: mach-k3: j7200: Add support for SOC detection > arm: mach-k3: j7200: Add support for storing extended boot info from > ROM > arm: mach-k3: j7200: Detect if ROM has already loaded sysfw > board: ti: j7200: Introduce support for j7200 build targets > board: ti: j7200: Add board detection support for j7200 > ram: k3-j721e: Relax version checks for memory controller > arm: dts: k3-j7200: Add dts support > configs: j7200_evm_r5: Add initial support > configs: j7200_evm_a72: Add Initial support > > Suman Anna (1): > board: ti: j721e: Update fdt fixup logic for interconnect nodes > > arch/arm/dts/Makefile | 4 +- > .../k3-j7200-common-proc-board-u-boot.dtsi | 104 + > arch/arm/dts/k3-j7200-common-proc-board.dts | 123 + > arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi | 2195 +++++++++++++++++ > arch/arm/dts/k3-j7200-main.dtsi | 313 +++ > arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 117 + > .../arm/dts/k3-j7200-r5-common-proc-board.dts | 199 ++ > arch/arm/dts/k3-j7200-som-p0.dtsi | 29 + > arch/arm/dts/k3-j7200.dtsi | 175 ++ > arch/arm/mach-k3/am6_init.c | 12 +- > arch/arm/mach-k3/common.c | 38 + > arch/arm/mach-k3/common.h | 6 + > arch/arm/mach-k3/config.mk | 8 +- > arch/arm/mach-k3/include/mach/hardware.h | 8 + > .../arm/mach-k3/include/mach/j721e_hardware.h | 3 + > arch/arm/mach-k3/include/mach/sys_proto.h | 3 + > arch/arm/mach-k3/include/mach/sysfw-loader.h | 4 +- > arch/arm/mach-k3/j721e_init.c | 30 +- > arch/arm/mach-k3/sysfw-loader.c | 56 +- > board/ti/common/board_detect.h | 13 + > board/ti/j721e/Kconfig | 53 + > board/ti/j721e/evm.c | 25 +- > configs/j7200_evm_a72_defconfig | 175 ++ > configs/j7200_evm_r5_defconfig | 130 + > drivers/ram/k3-j721e/lpddr4.c | 16 +- > drivers/soc/soc_ti_k3.c | 4 + > include/configs/j721e_evm.h | 4 +- > 27 files changed, 3776 insertions(+), 71 deletions(-) > create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi > create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts > create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi > create mode 100644 arch/arm/dts/k3-j7200-main.dtsi > create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi > create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts > create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi > create mode 100644 arch/arm/dts/k3-j7200.dtsi > create mode 100644 configs/j7200_evm_a72_defconfig > create mode 100644 configs/j7200_evm_r5_defconfig >