diff mbox series

can: m_can: Set device to software init mode before closing

Message ID 20200716042312.26989-1-faiz_abbas@ti.com
State Awaiting Upstream
Delegated to: David Miller
Headers show
Series can: m_can: Set device to software init mode before closing | expand

Commit Message

Faiz Abbas July 16, 2020, 4:23 a.m. UTC
There might be some requests pending in the buffer when the
interface close sequence occurs. In some devices, these
pending requests might lead to the module not shutting down
properly when m_can_clk_stop() is called.

Therefore, move the device to init state before potentially
powering it down.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/net/can/m_can/m_can.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Faiz Abbas July 28, 2020, 6:20 a.m. UTC | #1
Hi,

On 16/07/20 9:53 am, Faiz Abbas wrote:
> There might be some requests pending in the buffer when the
> interface close sequence occurs. In some devices, these
> pending requests might lead to the module not shutting down
> properly when m_can_clk_stop() is called.
> 
> Therefore, move the device to init state before potentially
> powering it down.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>  drivers/net/can/m_can/m_can.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 02c5795b7393..d0c458f7f6e1 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1414,6 +1414,9 @@ static void m_can_stop(struct net_device *dev)
>  	/* disable all interrupts */
>  	m_can_disable_all_interrupts(cdev);
>  
> +	/* Set init mode to disengage from the network */
> +	m_can_config_endisable(cdev, true);
> +
>  	/* set the state as STOPPED */
>  	cdev->can.state = CAN_STATE_STOPPED;
>  }
> 

Gentle ping.

Thanks,
Faiz
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 02c5795b7393..d0c458f7f6e1 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1414,6 +1414,9 @@  static void m_can_stop(struct net_device *dev)
 	/* disable all interrupts */
 	m_can_disable_all_interrupts(cdev);
 
+	/* Set init mode to disengage from the network */
+	m_can_config_endisable(cdev, true);
+
 	/* set the state as STOPPED */
 	cdev->can.state = CAN_STATE_STOPPED;
 }