| Message ID | 20200721132537.362160-1-linus.walleij@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: sx150x: Use irqchip template | expand |
On 21/07/2020 15:25, Linus Walleij wrote: > This makes the driver use the irqchip template to assign > properties to the gpio_irq_chip instead of using the > explicit calls to gpiochip_irqchip_add_nested() and > gpiochip_set_nested_irqchip(). The irqchip is instead > added while adding the gpiochip. > > Cc: Peter Rosin <peda@axentia.se> > Cc: Andrey Smirnov <andrew.smirnov@gmail.com> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/pinctrl/pinctrl-sx150x.c | 44 ++++++++++++++++---------------- > 1 file changed, 22 insertions(+), 22 deletions(-) > > diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c > index 708bc91862fe..b325a136ac48 100644 > --- a/drivers/pinctrl/pinctrl-sx150x.c > +++ b/drivers/pinctrl/pinctrl-sx150x.c > @@ -1187,17 +1187,10 @@ static int sx150x_probe(struct i2c_client *client, > if (pctl->data->model != SX150X_789) > pctl->gpio.set_multiple = sx150x_gpio_set_multiple; > > - ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); > - if (ret) > - return ret; > - > - ret = gpiochip_add_pin_range(&pctl->gpio, dev_name(dev), > - 0, 0, pctl->data->npins); > - if (ret) > - return ret; > - > /* Add Interrupt support if an irq is specified */ > if (client->irq > 0) { > + struct gpio_irq_chip *girq; > + > pctl->irq_chip.irq_mask = sx150x_irq_mask; > pctl->irq_chip.irq_unmask = sx150x_irq_unmask; > pctl->irq_chip.irq_set_type = sx150x_irq_set_type; > @@ -1213,8 +1206,8 @@ static int sx150x_probe(struct i2c_client *client, > > /* > * Because sx150x_irq_threaded_fn invokes all of the > - * nested interrrupt handlers via handle_nested_irq, > - * any "handler" passed to gpiochip_irqchip_add() > + * nested interrupt handlers via handle_nested_irq, > + * any "handler" assigned to struct gpio_irq_chip > * below is going to be ignored, so the choice of the > * function does not matter that much. > * > @@ -1222,13 +1215,15 @@ static int sx150x_probe(struct i2c_client *client, > * plus it will be instantly noticeable if it is ever > * called (should not happen) > */ > - ret = gpiochip_irqchip_add_nested(&pctl->gpio, > - &pctl->irq_chip, 0, > - handle_bad_irq, IRQ_TYPE_NONE); > - if (ret) { > - dev_err(dev, "could not connect irqchip to gpiochip\n"); > - return ret; > - } > + girq = &pctl->gpio.irq; > + girq->chip = &pctl->irq_chip; > + /* This will let us handle the parent IRQ in the driver */ > + girq->parent_handler = NULL; > + girq->num_parents = 0; > + girq->parents = NULL; > + girq->default_type = IRQ_TYPE_NONE; > + girq->handler = handle_bad_irq; > + girq->threaded = true; > > ret = devm_request_threaded_irq(dev, client->irq, NULL, > sx150x_irq_thread_fn, > @@ -1237,12 +1232,17 @@ static int sx150x_probe(struct i2c_client *client, > pctl->irq_chip.name, pctl); > if (ret < 0) > return ret; > - > - gpiochip_set_nested_irqchip(&pctl->gpio, > - &pctl->irq_chip, > - client->irq); > } > > + ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); > + if (ret) > + return ret; > + > + ret = gpiochip_add_pin_range(&pctl->gpio, dev_name(dev), > + 0, 0, pctl->data->npins); > + if (ret) > + return ret; > + > return 0; > } > > Acked-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c index 708bc91862fe..b325a136ac48 100644 --- a/drivers/pinctrl/pinctrl-sx150x.c +++ b/drivers/pinctrl/pinctrl-sx150x.c @@ -1187,17 +1187,10 @@ static int sx150x_probe(struct i2c_client *client, if (pctl->data->model != SX150X_789) pctl->gpio.set_multiple = sx150x_gpio_set_multiple; - ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); - if (ret) - return ret; - - ret = gpiochip_add_pin_range(&pctl->gpio, dev_name(dev), - 0, 0, pctl->data->npins); - if (ret) - return ret; - /* Add Interrupt support if an irq is specified */ if (client->irq > 0) { + struct gpio_irq_chip *girq; + pctl->irq_chip.irq_mask = sx150x_irq_mask; pctl->irq_chip.irq_unmask = sx150x_irq_unmask; pctl->irq_chip.irq_set_type = sx150x_irq_set_type; @@ -1213,8 +1206,8 @@ static int sx150x_probe(struct i2c_client *client, /* * Because sx150x_irq_threaded_fn invokes all of the - * nested interrrupt handlers via handle_nested_irq, - * any "handler" passed to gpiochip_irqchip_add() + * nested interrupt handlers via handle_nested_irq, + * any "handler" assigned to struct gpio_irq_chip * below is going to be ignored, so the choice of the * function does not matter that much. * @@ -1222,13 +1215,15 @@ static int sx150x_probe(struct i2c_client *client, * plus it will be instantly noticeable if it is ever * called (should not happen) */ - ret = gpiochip_irqchip_add_nested(&pctl->gpio, - &pctl->irq_chip, 0, - handle_bad_irq, IRQ_TYPE_NONE); - if (ret) { - dev_err(dev, "could not connect irqchip to gpiochip\n"); - return ret; - } + girq = &pctl->gpio.irq; + girq->chip = &pctl->irq_chip; + /* This will let us handle the parent IRQ in the driver */ + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + girq->threaded = true; ret = devm_request_threaded_irq(dev, client->irq, NULL, sx150x_irq_thread_fn, @@ -1237,12 +1232,17 @@ static int sx150x_probe(struct i2c_client *client, pctl->irq_chip.name, pctl); if (ret < 0) return ret; - - gpiochip_set_nested_irqchip(&pctl->gpio, - &pctl->irq_chip, - client->irq); } + ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); + if (ret) + return ret; + + ret = gpiochip_add_pin_range(&pctl->gpio, dev_name(dev), + 0, 0, pctl->data->npins); + if (ret) + return ret; + return 0; }
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit calls to gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip(). The irqchip is instead added while adding the gpiochip. Cc: Peter Rosin <peda@axentia.se> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/pinctrl/pinctrl-sx150x.c | 44 ++++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)