Message ID | 20200702093721.6063-1-miles.chen@mediatek.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | [1/4] dt-bindings: mediatek: add mediatek,infracfg phandle | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success |
On Thu, Jul 02, 2020 at 05:37:17PM +0800, Miles Chen wrote: > Add a description for mediatek,infracfg. We can check if 4GB mode > is enable by reading it instead of checking the unexported > symbol "max_pfn". > > This is a step towards building mtk_iommu as a kernel module. You determined this before without DT, so it is an OS problem and shouldn't need a DT update. I'd assume there's only one instance of the node mediatek,infracfg points to, so just search for it if you want to get the info from DT. > > Cc: Yong Wu <yong.wu@mediatek.com> > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > --- > Documentation/devicetree/bindings/iommu/mediatek,iommu.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > index ce59a505f5a4..a7881deabcca 100644 > --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > @@ -74,6 +74,8 @@ Required properties: > - mediatek,larbs : List of phandle to the local arbiters in the current Socs. > Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort > according to the local arbiter index, like larb0, larb1, larb2... > +- mediatek,infracfg: a phandle to infracfg. It is used to confirm if 4GB mode is set. > + It is an optional property, add it when the SoC have 4g mode. > - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. > Specifies the mtk_m4u_id as defined in > dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 > -- > 2.18.0
On 02/07/2020 11:37, Miles Chen wrote: > In previous disscusion [1] and [2], we found that it is risky to > use max_pfn or totalram_pages to tell if 4GB mode is enabled. > > Check 4GB mode by reading infracfg register, remove the usage > of the unexported symbol max_pfn. > > [1] https://lkml.org/lkml/2020/6/3/733 > [2] https://lkml.org/lkml/2020/6/4/136 > > Cc: Mike Rapoport <rppt@linux.ibm.com> > Cc: David Hildenbrand <david@redhat.com> > Cc: Yong Wu <yong.wu@mediatek.com> > Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> > Cc: Christoph Hellwig <hch@lst.de> > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > --- > drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++---- > 1 file changed, 18 insertions(+), 4 deletions(-) > > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c > index 2be96f1cdbd2..09be57bd8d74 100644 > --- a/drivers/iommu/mtk_iommu.c > +++ b/drivers/iommu/mtk_iommu.c > @@ -3,7 +3,6 @@ > * Copyright (c) 2015-2016 MediaTek Inc. > * Author: Yong Wu <yong.wu@mediatek.com> > */ > -#include <linux/memblock.h> > #include <linux/bug.h> > #include <linux/clk.h> > #include <linux/component.h> > @@ -15,11 +14,13 @@ > #include <linux/iommu.h> > #include <linux/iopoll.h> > #include <linux/list.h> > +#include <linux/mfd/syscon.h> > #include <linux/of_address.h> > #include <linux/of_iommu.h> > #include <linux/of_irq.h> > #include <linux/of_platform.h> > #include <linux/platform_device.h> > +#include <linux/regmap.h> > #include <linux/slab.h> > #include <linux/spinlock.h> > #include <asm/barrier.h> > @@ -91,6 +92,9 @@ > #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7) > #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f) > > +#define REG_INFRA_MISC 0xf00 > +#define F_DDR_4GB_SUPPORT_EN BIT(13) > + As this is used for infracfg, I think it would be good to add it to include/linux/soc/mediatek/infracfg.h and include that file here. > #define MTK_PROTECT_PA_ALIGN 128 > > /* > @@ -599,8 +603,10 @@ static int mtk_iommu_probe(struct platform_device *pdev) > struct resource *res; > resource_size_t ioaddr; > struct component_match *match = NULL; > + struct regmap *infracfg_regmap; Maybe call it just infracfg. > void *protect; > int i, larb_nr, ret; > + u32 val; > > data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > if (!data) > @@ -614,10 +620,18 @@ static int mtk_iommu_probe(struct platform_device *pdev) > return -ENOMEM; > data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN); > > - /* Whether the current dram is over 4GB */ > - data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT)); > - if (!data->plat_data->has_4gb_mode) > + if (data->plat_data->has_4gb_mode) { > + infracfg_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, > + "mediatek,infracfg"); > + if (IS_ERR(infracfg_regmap)) > + return PTR_ERR(infracfg_regmap); Do we need to error out, or could we be conservative and set endable_4GB = false? > + ret = regmap_read(infracfg_regmap, REG_INFRA_MISC, &val); > + if (ret) > + return ret; > + data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN); > + } else { > data->enable_4GB = false; Move that before the if() and update enable_4GB only in case of has_4gb_mode. > + } > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > data->base = devm_ioremap_resource(dev, res); >
On Wed, 2020-07-15 at 14:51 -0600, Rob Herring wrote: > On Thu, Jul 02, 2020 at 05:37:17PM +0800, Miles Chen wrote: > > Add a description for mediatek,infracfg. We can check if 4GB mode > > is enable by reading it instead of checking the unexported > > symbol "max_pfn". > > > > This is a step towards building mtk_iommu as a kernel module. > > You determined this before without DT, so it is an OS problem and > shouldn't need a DT update. Thanks for your comment. The old way (using max_pfn) do determine this is risky because the max_pfn may lower than (GB if reserved memory regions occupy memory higher than 4GB. So, the better way to do this is by reading register from H/W. > > I'd assume there's only one instance of the node mediatek,infracfg > points to, so just search for it if you want to get the info from DT. > I can do syscon_regmap_lookup_by_compatible() to search for it. However, the compatibles are different in mt2712e.dtsi and mt8173.dtsi. so I have to search "mediatek,mt2712-infracfg" and "mediatek,mt8173-infracfg" respectively. Using mediatek,infracfg phandle can make the code easier to read. Is it possible to reconsider the phandle approach, please? arch/arm64/boot/dts/mediatek/mt2712e.dtsi:253: infracfg: syscon@10001000 { compatible = "mediatek,mt2712-infracfg", "syscon"; arch/arm64/boot/dts/mediatek/mt8173.dtsi:363: infracfg: power-controller@10001000 { compatible = "mediatek,mt8173-infracfg", "syscon"; > > > > > Cc: Yong Wu <yong.wu@mediatek.com> > > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > > --- > > Documentation/devicetree/bindings/iommu/mediatek,iommu.txt | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > > index ce59a505f5a4..a7881deabcca 100644 > > --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > > +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > > @@ -74,6 +74,8 @@ Required properties: > > - mediatek,larbs : List of phandle to the local arbiters in the current Socs. > > Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort > > according to the local arbiter index, like larb0, larb1, larb2... > > +- mediatek,infracfg: a phandle to infracfg. It is used to confirm if 4GB mode is set. > > + It is an optional property, add it when the SoC have 4g mode. > > - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. > > Specifies the mtk_m4u_id as defined in > > dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 > > -- > > 2.18.0
On Wed, 2020-07-15 at 23:05 +0200, Matthias Brugger wrote: > > On 02/07/2020 11:37, Miles Chen wrote: > > In previous disscusion [1] and [2], we found that it is risky to > > use max_pfn or totalram_pages to tell if 4GB mode is enabled. > > > > Check 4GB mode by reading infracfg register, remove the usage > > of the unexported symbol max_pfn. > > > > [1] https://urldefense.com/v3/__https://lkml.org/lkml/2020/6/3/733__;!!CTRNKA9wMg0ARbw!16gAfVnSY87W4t5kE4iw20QPxBgS_SHBvPKlePKU7CGIb18nUzuRUjHumcf4oYVhIQ$ > > [2] https://urldefense.com/v3/__https://lkml.org/lkml/2020/6/4/136__;!!CTRNKA9wMg0ARbw!16gAfVnSY87W4t5kE4iw20QPxBgS_SHBvPKlePKU7CGIb18nUzuRUjHumcfr4i9p5g$ > > > > Cc: Mike Rapoport <rppt@linux.ibm.com> > > Cc: David Hildenbrand <david@redhat.com> > > Cc: Yong Wu <yong.wu@mediatek.com> > > Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> > > Cc: Christoph Hellwig <hch@lst.de> > > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > > --- > > drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++---- > > 1 file changed, 18 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c > > index 2be96f1cdbd2..09be57bd8d74 100644 > > --- a/drivers/iommu/mtk_iommu.c > > +++ b/drivers/iommu/mtk_iommu.c > > @@ -3,7 +3,6 @@ > > * Copyright (c) 2015-2016 MediaTek Inc. > > * Author: Yong Wu <yong.wu@mediatek.com> > > */ > > -#include <linux/memblock.h> > > #include <linux/bug.h> > > #include <linux/clk.h> > > #include <linux/component.h> > > @@ -15,11 +14,13 @@ > > #include <linux/iommu.h> > > #include <linux/iopoll.h> > > #include <linux/list.h> > > +#include <linux/mfd/syscon.h> > > #include <linux/of_address.h> > > #include <linux/of_iommu.h> > > #include <linux/of_irq.h> > > #include <linux/of_platform.h> > > #include <linux/platform_device.h> > > +#include <linux/regmap.h> > > #include <linux/slab.h> > > #include <linux/spinlock.h> > > #include <asm/barrier.h> > > @@ -91,6 +92,9 @@ > > #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7) > > #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f) > > > > +#define REG_INFRA_MISC 0xf00 > > +#define F_DDR_4GB_SUPPORT_EN BIT(13) > > + > > As this is used for infracfg, I think it would be good to add it to > include/linux/soc/mediatek/infracfg.h and include that file here. Thanks for your comment. ok. I'll do this in next version. > > > #define MTK_PROTECT_PA_ALIGN 128 > > > > /* > > @@ -599,8 +603,10 @@ static int mtk_iommu_probe(struct platform_device *pdev) > > struct resource *res; > > resource_size_t ioaddr; > > struct component_match *match = NULL; > > + struct regmap *infracfg_regmap; > > Maybe call it just infracfg. ok. I'll do this in next version. > > > void *protect; > > int i, larb_nr, ret; > > + u32 val; > > > > data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > > if (!data) > > @@ -614,10 +620,18 @@ static int mtk_iommu_probe(struct platform_device *pdev) > > return -ENOMEM; > > data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN); > > > > - /* Whether the current dram is over 4GB */ > > - data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT)); > > - if (!data->plat_data->has_4gb_mode) > > + if (data->plat_data->has_4gb_mode) { > > + infracfg_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, > > + "mediatek,infracfg"); > > + if (IS_ERR(infracfg_regmap)) > > + return PTR_ERR(infracfg_regmap); > > Do we need to error out, or could we be conservative and set endable_4GB = false? We have to error out in this case because the 4gb_mode setting must be consistent with the h/w setting. > > > + ret = regmap_read(infracfg_regmap, REG_INFRA_MISC, &val); > > + if (ret) > > + return ret; > > + data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN); > > + } else { > > data->enable_4GB = false; > > Move that before the if() and update enable_4GB only in case of has_4gb_mode. ok. I'll do this in next version. Miles > > > + } > > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > data->base = devm_ioremap_resource(dev, res); > >
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt index ce59a505f5a4..a7881deabcca 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -74,6 +74,8 @@ Required properties: - mediatek,larbs : List of phandle to the local arbiters in the current Socs. Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort according to the local arbiter index, like larb0, larb1, larb2... +- mediatek,infracfg: a phandle to infracfg. It is used to confirm if 4GB mode is set. + It is an optional property, add it when the SoC have 4g mode. - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
Add a description for mediatek,infracfg. We can check if 4GB mode is enable by reading it instead of checking the unexported symbol "max_pfn". This is a step towards building mtk_iommu as a kernel module. Cc: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Miles Chen <miles.chen@mediatek.com> --- Documentation/devicetree/bindings/iommu/mediatek,iommu.txt | 2 ++ 1 file changed, 2 insertions(+)