Message ID | 20200701112216.GA8098@laureti-dev |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | net: dsa: microchip: enable ksz9893 via i2c in the ksz9477 driver | expand |
On Wed, Jul 01, 2020 at 01:22:20PM +0200, Helmut Grohne wrote: > The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, > I²C or MDIO (very limited and not supported by this driver). While there > is already a compatible entry for the SPI bus, it was missing for I²C. > > Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On 7/1/2020 4:22 AM, Helmut Grohne wrote: > The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, > I²C or MDIO (very limited and not supported by this driver). While there > is already a compatible entry for the SPI bus, it was missing for I²C. > > Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
From: Helmut Grohne <helmut.grohne@intenta.de> Date: Wed, 1 Jul 2020 13:22:20 +0200 > The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, > I²C or MDIO (very limited and not supported by this driver). While there > is already a compatible entry for the SPI bus, it was missing for I²C. > > Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Applied, thank you.
diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index fdffd9e0c518..2805839e5c55 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -79,6 +79,7 @@ MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id); static const struct of_device_id ksz9477_dt_ids[] = { { .compatible = "microchip,ksz9477" }, { .compatible = "microchip,ksz9897" }, + { .compatible = "microchip,ksz9893" }, { .compatible = "microchip,ksz9567" }, {}, };
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> --- drivers/net/dsa/microchip/ksz9477_i2c.c | 1 + 1 file changed, 1 insertion(+)