Message ID | 20200527164934.28651-4-dmurphy@ti.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | RGMII Internal delay common property | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/dt-meta-schema | success |
On Wed, May 27, 2020 at 11:49:33AM -0500, Dan Murphy wrote: > Add the internal delay values into the header and update the binding > with the internal delay properties. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > .../devicetree/bindings/net/ti,dp83869.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml > index 5b69ef03bbf7..2971dd3fc039 100644 > --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml > +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml > @@ -64,6 +64,20 @@ properties: > Operational mode for the PHY. If this is not set then the operational > mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values > > + rx-internal-delay-ps: > + $ref: "#/properties/rx-internal-delay-ps" This just creates a circular reference which probably blows up. > + description: Delay is in pico seconds > + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, > + 3250, 3500, 3750, 4000 ] > + default: 2000 > + > + tx-internal-delay-ps: > + $ref: "#/properties/tx-internal-delay-ps" > + description: Delay is in pico seconds > + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, > + 3250, 3500, 3750, 4000 ] > + default: 2000 > + > required: > - reg > > @@ -80,5 +94,7 @@ examples: > ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; > ti,max-output-impedance = "true"; > ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>; > + rx-internal-delay-ps = <2000>; > + tx-internal-delay-ps = <2000>; > }; > }; > -- > 2.26.2 >
Rob On 5/29/20 2:03 PM, Rob Herring wrote: > On Wed, May 27, 2020 at 11:49:33AM -0500, Dan Murphy wrote: >> Add the internal delay values into the header and update the binding >> with the internal delay properties. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> .../devicetree/bindings/net/ti,dp83869.yaml | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml >> index 5b69ef03bbf7..2971dd3fc039 100644 >> --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml >> +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml >> @@ -64,6 +64,20 @@ properties: >> Operational mode for the PHY. If this is not set then the operational >> mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values >> >> + rx-internal-delay-ps: >> + $ref: "#/properties/rx-internal-delay-ps" > This just creates a circular reference which probably blows up. dt_binding_check did not have an issue with this. But I will remove it Dan
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index 5b69ef03bbf7..2971dd3fc039 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -64,6 +64,20 @@ properties: Operational mode for the PHY. If this is not set then the operational mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values + rx-internal-delay-ps: + $ref: "#/properties/rx-internal-delay-ps" + description: Delay is in pico seconds + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, + 3250, 3500, 3750, 4000 ] + default: 2000 + + tx-internal-delay-ps: + $ref: "#/properties/tx-internal-delay-ps" + description: Delay is in pico seconds + enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, + 3250, 3500, 3750, 4000 ] + default: 2000 + required: - reg @@ -80,5 +94,7 @@ examples: ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>; ti,max-output-impedance = "true"; ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; }; };
Add the internal delay values into the header and update the binding with the internal delay properties. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/net/ti,dp83869.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)