Message ID | 20200430021314.6425-1-justin.he@arm.com |
---|---|
State | Changes Requested |
Delegated to: | David Miller |
Headers | show |
Series | vhost: vsock: don't send pkt when vq is not started | expand |
Hi Jia, thanks for the patch, some comments below: On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. > The unconditional timeout is caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of > connect at client side. The vhost vsock client tries to connect an > initlizing virtio vsock server. > > The abnormal flow looks like: > host-userspace vhost vsock guest vsock > ============== =========== ============ > connect() --------> vhost_transport_send_pkt_work() initializing > | vq->private_data==NULL > | will not be queued > V > schedule_timeout(2s) > vhost_vsock_start() <--------- device ready > set vq->private_data > > wait for 2s and failed > > connect() again vq->private_data!=NULL recv connecting pkt > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > initializing, hence the vhost_vsock_start has not been called. So > vq->private_data==NULL, and the pkt is not been queued to send to guest. > 2. then it sleeps for 2s > 3. after guest vsock finishes initializing, vq->private_data is set. > 4. When host userspace wakes up after 2s, send connecting pkt again, > everything is fine. > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > and return at once if !vq->private_data. This makes user connect() > be returned with ECONNREFUSED. > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > 3s to 1s on ThunderX2 arm64 server. > > [1] https://github.com/kata-containers/runtime/issues/1917 > > Reported-by: Ning Bo <n.b@live.com> > Signed-off-by: Jia He <justin.he@arm.com> > --- > drivers/vhost/vsock.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > index e36aaf9ba7bd..67474334dd88 100644 > --- a/drivers/vhost/vsock.c > +++ b/drivers/vhost/vsock.c > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) > { > struct vhost_vsock *vsock; > int len = pkt->len; > + struct vhost_virtqueue *vq; > > rcu_read_lock(); > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) > return -ENODEV; > } > > + vq = &vsock->vqs[VSOCK_VQ_RX]; > + if (!vq->private_data) { I think is better to use vhost_vq_get_backend(): if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { ... This function should be called with 'vq->mutex' acquired as explained in the comment, but here we can avoid that, because we are not using the vq, so it is safe, because in vhost_transport_do_send_pkt() we check it again. Please add a comment explaining that. As an alternative to this patch, should we kick the send worker when the device is ready? IIUC we reach the timeout because the send worker (that runs vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' is NULL, and no one will requeue it. Let's do it when we know the device is ready: diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index e36aaf9ba7bd..295b5867944f 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) mutex_unlock(&vq->mutex); } + /* Some packets may have been queued before the device was started, + * let's kick the send worker to send them. + */ + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); + mutex_unlock(&vsock->dev.mutex); return 0; I didn't test it, can you try if it fixes the issue? I'm not sure which is better... Thanks, Stefano
Hi Stefano > -----Original Message----- > From: Stefano Garzarella <sgarzare@redhat.com> > Sent: Thursday, April 30, 2020 4:26 PM > To: Justin He <Justin.He@arm.com> > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > <Kaly.Xin@arm.com> > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > Hi Jia, > thanks for the patch, some comments below: > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > Ning Bo reported an abnormal 2-second gap when booting Kata container > [1]. > > The unconditional timeout is caused by > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > connect at client side. The vhost vsock client tries to connect an > > initlizing virtio vsock server. > > > > The abnormal flow looks like: > > host-userspace vhost vsock guest vsock > > ============== =========== ============ > > connect() --------> vhost_transport_send_pkt_work() initializing > > | vq->private_data==NULL > > | will not be queued > > V > > schedule_timeout(2s) > > vhost_vsock_start() <--------- device ready > > set vq->private_data > > > > wait for 2s and failed > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > initializing, hence the vhost_vsock_start has not been called. So > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > 2. then it sleeps for 2s > > 3. after guest vsock finishes initializing, vq->private_data is set. > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > everything is fine. > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > and return at once if !vq->private_data. This makes user connect() > > be returned with ECONNREFUSED. > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > 3s to 1s on ThunderX2 arm64 server. > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > Reported-by: Ning Bo <n.b@live.com> > > Signed-off-by: Jia He <justin.he@arm.com> > > --- > > drivers/vhost/vsock.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > index e36aaf9ba7bd..67474334dd88 100644 > > --- a/drivers/vhost/vsock.c > > +++ b/drivers/vhost/vsock.c > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > *pkt) > > { > > struct vhost_vsock *vsock; > > int len = pkt->len; > > +struct vhost_virtqueue *vq; > > > > rcu_read_lock(); > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > *pkt) > > return -ENODEV; > > } > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > +if (!vq->private_data) { > > I think is better to use vhost_vq_get_backend(): > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > ... > > This function should be called with 'vq->mutex' acquired as explained in > the comment, but here we can avoid that, because we are not using the vq, > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > Please add a comment explaining that. > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop and missed this helper. > > As an alternative to this patch, should we kick the send worker when the > device is ready? > > IIUC we reach the timeout because the send worker (that runs > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > is NULL, and no one will requeue it. > > Let's do it when we know the device is ready: > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > index e36aaf9ba7bd..295b5867944f 100644 > --- a/drivers/vhost/vsock.c > +++ b/drivers/vhost/vsock.c > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > *vsock) > mutex_unlock(&vq->mutex); > } > > + /* Some packets may have been queued before the device was started, > + * let's kick the send worker to send them. > + */ > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > + Yes, it works. But do you think a threshold should be set here to prevent the queue from being too long? E.g. the client user sends too many connect pkts in a short time before the server is completely ready. > mutex_unlock(&vsock->dev.mutex); > return 0; > > I didn't test it, can you try if it fixes the issue? > > I'm not sure which is better... I don't know, either. Wait for more comments 😊 -- Cheers, Justin (Jia He) IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > Hi Stefano > > > -----Original Message----- > > From: Stefano Garzarella <sgarzare@redhat.com> > > Sent: Thursday, April 30, 2020 4:26 PM > > To: Justin He <Justin.He@arm.com> > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > <Kaly.Xin@arm.com> > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > Hi Jia, > > thanks for the patch, some comments below: > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > [1]. > > > The unconditional timeout is caused by > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > connect at client side. The vhost vsock client tries to connect an > > > initlizing virtio vsock server. > > > > > > The abnormal flow looks like: > > > host-userspace vhost vsock guest vsock > > > ============== =========== ============ > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > | vq->private_data==NULL > > > | will not be queued > > > V > > > schedule_timeout(2s) > > > vhost_vsock_start() <--------- device ready > > > set vq->private_data > > > > > > wait for 2s and failed > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > initializing, hence the vhost_vsock_start has not been called. So > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > 2. then it sleeps for 2s > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > everything is fine. > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > and return at once if !vq->private_data. This makes user connect() > > > be returned with ECONNREFUSED. > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > Signed-off-by: Jia He <justin.he@arm.com> > > > --- > > > drivers/vhost/vsock.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > index e36aaf9ba7bd..67474334dd88 100644 > > > --- a/drivers/vhost/vsock.c > > > +++ b/drivers/vhost/vsock.c > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > *pkt) > > > { > > > struct vhost_vsock *vsock; > > > int len = pkt->len; > > > +struct vhost_virtqueue *vq; > > > > > > rcu_read_lock(); > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > *pkt) > > > return -ENODEV; > > > } > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > +if (!vq->private_data) { > > > > I think is better to use vhost_vq_get_backend(): > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > ... > > > > This function should be called with 'vq->mutex' acquired as explained in > > the comment, but here we can avoid that, because we are not using the vq, > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > Please add a comment explaining that. > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > and missed this helper. :-) > > > > As an alternative to this patch, should we kick the send worker when the > > device is ready? > > > > IIUC we reach the timeout because the send worker (that runs > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > is NULL, and no one will requeue it. > > > > Let's do it when we know the device is ready: > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > index e36aaf9ba7bd..295b5867944f 100644 > > --- a/drivers/vhost/vsock.c > > +++ b/drivers/vhost/vsock.c > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > *vsock) > > mutex_unlock(&vq->mutex); > > } > > > > + /* Some packets may have been queued before the device was started, > > + * let's kick the send worker to send them. > > + */ > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > + > Yes, it works. > But do you think a threshold should be set here to prevent the queue > from being too long? E.g. the client user sends too many connect pkts > in a short time before the server is completely ready. When the user call the connect() the socket status is moved to SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on the same socket will receive EALREADY error. If the user uses multiple sockets, the socket layer already check for any limits, so I don't think we should put a threshold here. > > > mutex_unlock(&vsock->dev.mutex); > > return 0; > > > > I didn't test it, can you try if it fixes the issue? > > > > I'm not sure which is better... > I don't know, either. Wait for more comments 😊 I prefer the second option, because the device is in a transitional state and a connect can block (for at most two seconds) until the device is started. For the first option, I'm also not sure if ECONNREFUSED is the right error to return, maybe is better ENETUNREACH. Cheers, Stefano
On Thu, Apr 30, 2020 at 06:25:21PM +0200, Stefano Garzarella wrote: > On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > > Hi Stefano > > > > > -----Original Message----- > > > From: Stefano Garzarella <sgarzare@redhat.com> > > > Sent: Thursday, April 30, 2020 4:26 PM > > > To: Justin He <Justin.He@arm.com> > > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > > <Kaly.Xin@arm.com> > > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > > > Hi Jia, > > > thanks for the patch, some comments below: > > > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > > [1]. > > > > The unconditional timeout is caused by > > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > > connect at client side. The vhost vsock client tries to connect an > > > > initlizing virtio vsock server. > > > > > > > > The abnormal flow looks like: > > > > host-userspace vhost vsock guest vsock > > > > ============== =========== ============ > > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > > | vq->private_data==NULL > > > > | will not be queued > > > > V > > > > schedule_timeout(2s) > > > > vhost_vsock_start() <--------- device ready > > > > set vq->private_data > > > > > > > > wait for 2s and failed > > > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > > initializing, hence the vhost_vsock_start has not been called. So > > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > > 2. then it sleeps for 2s > > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > > everything is fine. > > > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > > and return at once if !vq->private_data. This makes user connect() > > > > be returned with ECONNREFUSED. > > > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > > Signed-off-by: Jia He <justin.he@arm.com> > > > > --- > > > > drivers/vhost/vsock.c | 8 ++++++++ > > > > 1 file changed, 8 insertions(+) > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > index e36aaf9ba7bd..67474334dd88 100644 > > > > --- a/drivers/vhost/vsock.c > > > > +++ b/drivers/vhost/vsock.c > > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > *pkt) > > > > { > > > > struct vhost_vsock *vsock; > > > > int len = pkt->len; > > > > +struct vhost_virtqueue *vq; > > > > > > > > rcu_read_lock(); > > > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > *pkt) > > > > return -ENODEV; > > > > } > > > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > > +if (!vq->private_data) { > > > > > > I think is better to use vhost_vq_get_backend(): > > > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > > ... > > > > > > This function should be called with 'vq->mutex' acquired as explained in > > > the comment, but here we can avoid that, because we are not using the vq, > > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > > > Please add a comment explaining that. > > > > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > > and missed this helper. > > :-) > > > > > > > As an alternative to this patch, should we kick the send worker when the > > > device is ready? > > > > > > IIUC we reach the timeout because the send worker (that runs > > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > > is NULL, and no one will requeue it. > > > > > > Let's do it when we know the device is ready: > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > index e36aaf9ba7bd..295b5867944f 100644 > > > --- a/drivers/vhost/vsock.c > > > +++ b/drivers/vhost/vsock.c > > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > > *vsock) > > > mutex_unlock(&vq->mutex); > > > } > > > > > > + /* Some packets may have been queued before the device was started, > > > + * let's kick the send worker to send them. > > > + */ > > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > > + > > Yes, it works. > > But do you think a threshold should be set here to prevent the queue > > from being too long? E.g. the client user sends too many connect pkts > > in a short time before the server is completely ready. > > When the user call the connect() the socket status is moved to > SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on > the same socket will receive EALREADY error. > > If the user uses multiple sockets, the socket layer already check for > any limits, so I don't think we should put a threshold here. > > > > > > mutex_unlock(&vsock->dev.mutex); > > > return 0; > > > > > > I didn't test it, can you try if it fixes the issue? > > > > > > I'm not sure which is better... > > I don't know, either. Wait for more comments 😊 > > I prefer the second option, because the device is in a transitional > state and a connect can block (for at most two seconds) until the device is > started. > > For the first option, I'm also not sure if ECONNREFUSED is the right error > to return, maybe is better ENETUNREACH. > > Cheers, > Stefano IIRC: ECONNREFUSED is what one gets when connecting to remote a port which does not yet have a listening socket, so remote sends back RST. ENETUNREACH is when local network's down, so you can't even send a connection request. EHOSTUNREACH is remote network is down.
On Thu, Apr 30, 2020 at 03:43:00PM -0400, Michael S. Tsirkin wrote: > On Thu, Apr 30, 2020 at 06:25:21PM +0200, Stefano Garzarella wrote: > > On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > > > Hi Stefano > > > > > > > -----Original Message----- > > > > From: Stefano Garzarella <sgarzare@redhat.com> > > > > Sent: Thursday, April 30, 2020 4:26 PM > > > > To: Justin He <Justin.He@arm.com> > > > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > > > <Kaly.Xin@arm.com> > > > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > > > > > Hi Jia, > > > > thanks for the patch, some comments below: > > > > > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > > > [1]. > > > > > The unconditional timeout is caused by > > > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > > > connect at client side. The vhost vsock client tries to connect an > > > > > initlizing virtio vsock server. > > > > > > > > > > The abnormal flow looks like: > > > > > host-userspace vhost vsock guest vsock > > > > > ============== =========== ============ > > > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > > > | vq->private_data==NULL > > > > > | will not be queued > > > > > V > > > > > schedule_timeout(2s) > > > > > vhost_vsock_start() <--------- device ready > > > > > set vq->private_data > > > > > > > > > > wait for 2s and failed > > > > > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > > > initializing, hence the vhost_vsock_start has not been called. So > > > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > > > 2. then it sleeps for 2s > > > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > > > everything is fine. > > > > > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > > > and return at once if !vq->private_data. This makes user connect() > > > > > be returned with ECONNREFUSED. > > > > > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > > > Signed-off-by: Jia He <justin.he@arm.com> > > > > > --- > > > > > drivers/vhost/vsock.c | 8 ++++++++ > > > > > 1 file changed, 8 insertions(+) > > > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > > index e36aaf9ba7bd..67474334dd88 100644 > > > > > --- a/drivers/vhost/vsock.c > > > > > +++ b/drivers/vhost/vsock.c > > > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > > *pkt) > > > > > { > > > > > struct vhost_vsock *vsock; > > > > > int len = pkt->len; > > > > > +struct vhost_virtqueue *vq; > > > > > > > > > > rcu_read_lock(); > > > > > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > > *pkt) > > > > > return -ENODEV; > > > > > } > > > > > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > > > +if (!vq->private_data) { > > > > > > > > I think is better to use vhost_vq_get_backend(): > > > > > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > > > ... > > > > > > > > This function should be called with 'vq->mutex' acquired as explained in > > > > the comment, but here we can avoid that, because we are not using the vq, > > > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > > > > > Please add a comment explaining that. > > > > > > > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > > > and missed this helper. > > > > :-) > > > > > > > > > > As an alternative to this patch, should we kick the send worker when the > > > > device is ready? > > > > > > > > IIUC we reach the timeout because the send worker (that runs > > > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > > > is NULL, and no one will requeue it. > > > > > > > > Let's do it when we know the device is ready: > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > index e36aaf9ba7bd..295b5867944f 100644 > > > > --- a/drivers/vhost/vsock.c > > > > +++ b/drivers/vhost/vsock.c > > > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > > > *vsock) > > > > mutex_unlock(&vq->mutex); > > > > } > > > > > > > > + /* Some packets may have been queued before the device was started, > > > > + * let's kick the send worker to send them. > > > > + */ > > > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > > > + > > > Yes, it works. > > > But do you think a threshold should be set here to prevent the queue > > > from being too long? E.g. the client user sends too many connect pkts > > > in a short time before the server is completely ready. > > > > When the user call the connect() the socket status is moved to > > SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on > > the same socket will receive EALREADY error. > > > > If the user uses multiple sockets, the socket layer already check for > > any limits, so I don't think we should put a threshold here. > > > > > > > > > mutex_unlock(&vsock->dev.mutex); > > > > return 0; > > > > > > > > I didn't test it, can you try if it fixes the issue? > > > > > > > > I'm not sure which is better... > > > I don't know, either. Wait for more comments 😊 > > > > I prefer the second option, because the device is in a transitional > > state and a connect can block (for at most two seconds) until the device is > > started. > > > > For the first option, I'm also not sure if ECONNREFUSED is the right error > > to return, maybe is better ENETUNREACH. > > > > Cheers, > > Stefano > > IIRC: > > ECONNREFUSED is what one gets when connecting to remote a port which does not > yet have a listening socket, so remote sends back RST. > ENETUNREACH is when local network's down, so you can't even send a > connection request. > EHOSTUNREACH is remote network is down. Thanks for the clarification! I was looking at connect(2) man page and there isn't EHOSTUNREACH in the ERRORS section :-( But connect(3p) contains the following that match what you said: ECONNRESET Remote host reset the connection request. ENETUNREACH No route to the network is present. EHOSTUNREACH The destination host cannot be reached (probably because the host is down or a remote router cannot reach it). So in this case, I think ENETUNREACH should be the best one, since the device is down and we can't send the connection request, but also EHOSTUNREACH should fit... In af_vsock.c we already return ENETUNREACH when the stream is not allowed or we don't have a transport to use. Thanks, Stefano
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index e36aaf9ba7bd..67474334dd88 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) { struct vhost_vsock *vsock; int len = pkt->len; + struct vhost_virtqueue *vq; rcu_read_lock(); @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) return -ENODEV; } + vq = &vsock->vqs[VSOCK_VQ_RX]; + if (!vq->private_data) { + rcu_read_unlock(); + virtio_transport_free_pkt(pkt); + return -ECONNREFUSED; + } + if (pkt->reply) atomic_inc(&vsock->queued_replies);
Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout is caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connect at client side. The vhost vsock client tries to connect an initlizing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt 1. host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest. 2. then it sleeps for 2s 3. after guest vsock finishes initializing, vq->private_data is set. 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. This fixes it by checking vq->private_data in vhost_transport_send_pkt, and return at once if !vq->private_data. This makes user connect() be returned with ECONNREFUSED. After this patch, kata-runtime (with vsock enabled) boottime reduces from 3s to 1s on ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo <n.b@live.com> Signed-off-by: Jia He <justin.he@arm.com> --- drivers/vhost/vsock.c | 8 ++++++++ 1 file changed, 8 insertions(+)