Message ID | 20200417145737.1769111-1-numans@ovn.org |
---|---|
State | Accepted |
Headers | show |
Series | [ovs-dev,ovn] tests: Fix occasional failures for test 85. | expand |
Tested-by: Flavio Fernandes <flavio@flaviof.com <mailto:flavio@flaviof.com>> > On Apr 17, 2020, at 10:57 AM, numans@ovn.org wrote: > > From: Numan Siddique <numans@ovn.org> > > The test case "85: ovn -- send gratuitous ARP for NAT rules on HA distributed router" > fails occaionally. On faster systems, chances of failure are higher. > > This patch fixes this. > > Signed-off-by: Numan Siddique <numans@ovn.org> > --- > tests/ovn.at | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/tests/ovn.at b/tests/ovn.at > index f83d3f536..040f7cff5 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -11035,6 +11035,12 @@ only_broadcast_from_lrp1() { > garp="fffffffffffff0000000000108060001080006040001f00000000001c0a80064000000000000c0a80064" > echo $garp > expout > > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx > echo "packets on hv1-snoopvif:" > cat hv1_snoop_tx > @@ -11063,12 +11069,17 @@ as hv1 reset_pcap_file snoopvif hv1/snoopvif > as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 > > -# Wait for packets to be received. > -OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) > trim_zeros() { > sed 's/\(00\)\{1,\}$//' > } > > +# Wait for packets to be received. > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > @@ -11114,6 +11125,12 @@ trim_zeros() { > garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064" > echo $garp > expout > > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > -- > 2.25.1 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
Tested-by: Flavio Fernandes <flavio@flaviof.com> > On Apr 17, 2020, at 10:57 AM, numans@ovn.org wrote: > > From: Numan Siddique <numans@ovn.org> > > The test case "85: ovn -- send gratuitous ARP for NAT rules on HA distributed router" > fails occaionally. On faster systems, chances of failure are higher. > > This patch fixes this. > > Signed-off-by: Numan Siddique <numans@ovn.org> > --- > tests/ovn.at | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/tests/ovn.at b/tests/ovn.at > index f83d3f536..040f7cff5 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -11035,6 +11035,12 @@ only_broadcast_from_lrp1() { > garp="fffffffffffff0000000000108060001080006040001f00000000001c0a80064000000000000c0a80064" > echo $garp > expout > > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx > echo "packets on hv1-snoopvif:" > cat hv1_snoop_tx > @@ -11063,12 +11069,17 @@ as hv1 reset_pcap_file snoopvif hv1/snoopvif > as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 > > -# Wait for packets to be received. > -OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) > trim_zeros() { > sed 's/\(00\)\{1,\}$//' > } > > +# Wait for packets to be received. > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > @@ -11114,6 +11125,12 @@ trim_zeros() { > garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064" > echo $garp > expout > > +OVS_WAIT_UNTIL( > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > + echo "expected received = $exp_rcvd" > + test $exp_rcvd -ge 1]) > + > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > -- > 2.25.1 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On Fri, Apr 17, 2020 at 10:14 PM Flavio Fernandes <flavio@flaviof.com> wrote: > Tested-by: Flavio Fernandes <flavio@flaviof.com> > > Thanks Flavio for testing this patch. I applied this patch to master. Numan > > > > On Apr 17, 2020, at 10:57 AM, numans@ovn.org wrote: > > > > From: Numan Siddique <numans@ovn.org> > > > > The test case "85: ovn -- send gratuitous ARP for NAT rules on HA > distributed router" > > fails occaionally. On faster systems, chances of failure are higher. > > > > This patch fixes this. > > > > Signed-off-by: Numan Siddique <numans@ovn.org> > > --- > > tests/ovn.at | 21 +++++++++++++++++++-- > > 1 file changed, 19 insertions(+), 2 deletions(-) > > > > diff --git a/tests/ovn.at b/tests/ovn.at > > index f83d3f536..040f7cff5 100644 > > --- a/tests/ovn.at > > +++ b/tests/ovn.at > > @@ -11035,6 +11035,12 @@ only_broadcast_from_lrp1() { > > > garp="fffffffffffff0000000000108060001080006040001f00000000001c0a80064000000000000c0a80064" > > echo $garp > expout > > > > +OVS_WAIT_UNTIL( > > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > > rcv_text > > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > > + echo "expected received = $exp_rcvd" > > + test $exp_rcvd -ge 1]) > > + > > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | > trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx > > echo "packets on hv1-snoopvif:" > > cat hv1_snoop_tx > > @@ -11063,12 +11069,17 @@ as hv1 reset_pcap_file snoopvif hv1/snoopvif > > as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > > as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 > > > > -# Wait for packets to be received. > > -OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) > > trim_zeros() { > > sed 's/\(00\)\{1,\}$//' > > } > > > > +# Wait for packets to be received. > > +OVS_WAIT_UNTIL( > > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > > rcv_text > > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > > + echo "expected received = $exp_rcvd" > > + test $exp_rcvd -ge 1]) > > + > > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | > trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | > trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > > @@ -11114,6 +11125,12 @@ trim_zeros() { > > > garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064" > > echo $garp > expout > > > > +OVS_WAIT_UNTIL( > > + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > > rcv_text > > + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) > > + echo "expected received = $exp_rcvd" > > + test $exp_rcvd -ge 1]) > > + > > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | > trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx > > AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) > > $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | > trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx > > -- > > 2.25.1 > > > > _______________________________________________ > > dev mailing list > > dev@openvswitch.org > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > >
diff --git a/tests/ovn.at b/tests/ovn.at index f83d3f536..040f7cff5 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -11035,6 +11035,12 @@ only_broadcast_from_lrp1() { garp="fffffffffffff0000000000108060001080006040001f00000000001c0a80064000000000000c0a80064" echo $garp > expout +OVS_WAIT_UNTIL( + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) + echo "expected received = $exp_rcvd" + test $exp_rcvd -ge 1]) + $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx echo "packets on hv1-snoopvif:" cat hv1_snoop_tx @@ -11063,12 +11069,17 @@ as hv1 reset_pcap_file snoopvif hv1/snoopvif as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 -# Wait for packets to be received. -OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) trim_zeros() { sed 's/\(00\)\{1,\}$//' } +# Wait for packets to be received. +OVS_WAIT_UNTIL( + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) + echo "expected received = $exp_rcvd" + test $exp_rcvd -ge 1]) + $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx @@ -11114,6 +11125,12 @@ trim_zeros() { garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064" echo $garp > expout +OVS_WAIT_UNTIL( + [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap > rcv_text + exp_rcvd=$(cat rcv_text | grep $garp | wc -l) + echo "expected received = $exp_rcvd" + test $exp_rcvd -ge 1]) + $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx AT_CHECK([sort hv1_snoopvif_tx], [0], [expout]) $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx