Message ID | 20200402152336.538433-1-leon@kernel.org |
---|---|
State | Rejected |
Delegated to: | David Miller |
Headers | show |
Series | [net] net/sched: Don't print dump stack in event of transmission timeout | expand |
On Thu, 2 Apr 2020 18:23:36 +0300 Leon Romanovsky wrote: > From: Leon Romanovsky <leonro@mellanox.com> > > In event of transmission timeout, the drivers are given an opportunity > to recover and continue to work after some in-house cleanups. > > Such event can be caused by HW bugs, wrong congestion configurations > and many more other scenarios. In such case, users are interested to > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > netdevice in trouble. > > The dump stack printed later was added in the commit b4192bbd85d2 > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > extra information, like list of the modules and which driver is involved. > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > of modules rarely needed and can be collected later. > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > large cluster setups. I'm of two minds about this. As much as printing a stack dump here is not that useful indeed, it's certainly a good way of getting user's attention. TX queue time outs should never happen, and there's a bunch of log crawlers out there looking for kernel warnings. Is there something special about IB here? The sender gets back pressured into oblivion? > [ 281.170584] ------------[ cut here ]------------ > [ 281.197120] NETDEV WATCHDOG: ib1 (mlx4_core): transmit queue 0 timed out > [ 281.198521] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x232/0x240 > [ 281.200259] Modules linked in: bonding ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx4_en ptp pps_core mlx4_ib mlx4_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlx4_core] > [ 281.208290] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-J14907-G268960df60ee #1 > [ 281.209954] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 > [ 281.212281] RIP: 0010:dev_watchdog+0x232/0x240 > [ 281.213260] Code: 85 c0 75 e8 eb a5 4c 89 ef c6 05 dd 9c c4 00 01 e8 d3 b6 fb ff 44 89 e1 4c 89 ee 48 c7 c7 40 54 0b 82 48 89 c2 e8 10 f1 a0 ff <0f> 0b eb 86 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 47 > [ 281.217078] RSP: 0018:ffffc90000003e70 EFLAGS: 00010282 > [ 281.218210] RAX: 0000000000000000 RBX: ffff8884521c3ce8 RCX: 0000000000000007 > [ 281.219709] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff88846fc18230 > [ 281.221206] RBP: ffff88846daad440 R08: 0000000000000000 R09: 0000000000000249 > [ 281.222697] R10: 0000000000000774 R11: ffffc90000003d25 R12: 0000000000000000 > [ 281.224202] R13: ffff88846daad000 R14: ffff88846daad440 R15: 0000000000000082 > [ 281.225733] FS: 0000000000000000(0000) GS:ffff88846fc00000(0000) knlGS:0000000000000000 > [ 281.227472] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 281.228713] CR2: 00007efd12565000 CR3: 000000043cd3a002 CR4: 0000000000160eb0 > [ 281.230241] Call Trace: > [ 281.230900] <IRQ> > [ 281.231469] ? qdisc_put_unlocked+0x30/0x30 > [ 281.232437] call_timer_fn+0x30/0x130 > [ 281.233300] run_timer_softirq+0x18b/0x490 > [ 281.234229] ? timerqueue_add+0x96/0xb0 > [ 281.235119] ? enqueue_hrtimer+0x3d/0x90 > [ 281.236029] __do_softirq+0xdf/0x2e5 > [ 281.236864] irq_exit+0xa0/0xb0 > [ 281.237621] smp_apic_timer_interrupt+0x72/0x120 > [ 281.238652] apic_timer_interrupt+0xf/0x20 > [ 281.239581] </IRQ> > [ 281.240147] RIP: 0010:default_idle+0x2d/0x150 > [ 281.241133] Code: 00 00 8b 05 3d 75 a7 00 41 54 55 65 8b 2d 6b e0 71 7e 53 85 c0 7f 29 8b 05 c8 97 f7 00 85 c0 7e 07 0f 00 2d 37 56 52 00 fb f4 <8b> 05 15 75 a7 00 65 8b 2d 46 e0 71 7e 85 c0 7f 7f 5b 5d 41 5c c3 > [ 281.244935] RSP: 0018:ffffffff82203ea0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 > [ 281.246584] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 > [ 281.248082] RDX: 000000000010db42 RSI: ffffffff82203e40 RDI: 000000416d8a7440 > [ 281.249581] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000041770da407 > [ 281.251069] R10: 0000000000000264 R11: 0000000000000000 R12: ffffffff82211840 > [ 281.252545] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff82211840 > [ 281.254036] do_idle+0x1ee/0x210 > [ 281.254809] cpu_startup_entry+0x19/0x20 > [ 281.255713] start_kernel+0x490/0x4af > [ 281.257577] secondary_startup_64+0xa4/0xb0 > [ 281.259147] ---[ end trace 78f566c0214a2cb0 ]--- > [ 281.260866] ib1: transmit timeout: latency 1120 msecs > [ 281.262730] ib1: queue stopped 1, tx_head 167838, tx_tail 167710 > > Fixes: b4192bbd85d2 ("net: Add a WARN_ON_ONCE() to the transmit timeout function") > Signed-off-by: Leon Romanovsky <leonro@mellanox.com> > --- > net/sched/sch_generic.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c > index 6c9595f1048a..c12530fe8b21 100644 > --- a/net/sched/sch_generic.c > +++ b/net/sched/sch_generic.c > @@ -439,8 +439,9 @@ static void dev_watchdog(struct timer_list *t) > > if (some_queue_timedout) { > trace_net_dev_xmit_timeout(dev, i); > - WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", > - dev->name, netdev_drivername(dev), i); > + pr_info_once("NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", I'd say pr_err_once(). Or dev_err_once(). > + dev->name, > + netdev_drivername(dev), i); > dev->netdev_ops->ndo_tx_timeout(dev, i); > } > if (!mod_timer(&dev->watchdog_timer, > -- > 2.25.1 >
From: Leon Romanovsky <leon@kernel.org> Date: Thu, 2 Apr 2020 18:23:36 +0300 > In event of transmission timeout, the drivers are given an opportunity > to recover and continue to work after some in-house cleanups. > > Such event can be caused by HW bugs, wrong congestion configurations > and many more other scenarios. In such case, users are interested to > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > netdevice in trouble. > > The dump stack printed later was added in the commit b4192bbd85d2 > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > extra information, like list of the modules and which driver is involved. > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > of modules rarely needed and can be collected later. > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > large cluster setups. Software bugs play into these situations and on at least two or three occasions I know that the backtrace hinted at the cause of the bug. I'm not applying this, sorry.
On Thu, Apr 2, 2020 at 6:02 PM David Miller <davem@davemloft.net> wrote: > > From: Leon Romanovsky <leon@kernel.org> > Date: Thu, 2 Apr 2020 18:23:36 +0300 > > > In event of transmission timeout, the drivers are given an opportunity > > to recover and continue to work after some in-house cleanups. > > > > Such event can be caused by HW bugs, wrong congestion configurations > > and many more other scenarios. In such case, users are interested to > > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > > netdevice in trouble. > > > > The dump stack printed later was added in the commit b4192bbd85d2 > > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > > extra information, like list of the modules and which driver is involved. > > > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > > of modules rarely needed and can be collected later. > > > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > > large cluster setups. > > Software bugs play into these situations and on at least two or three > occasions I know that the backtrace hinted at the cause of the bug. > I don't see how a timer stack trace could help to debug this issue in any scenario, the messages out of this stack trace are indeed helpful. On the other hand, a stack trace does help to get some attention via ABRT, but at least for us we now use rasdaemon to capture this, so I am 100% fine to remove this stack trace. Thanks.
On Thu, Apr 2, 2020 at 3:57 PM Jakub Kicinski <kuba@kernel.org> wrote: > > On Thu, 2 Apr 2020 18:23:36 +0300 Leon Romanovsky wrote: > > From: Leon Romanovsky <leonro@mellanox.com> > > > > In event of transmission timeout, the drivers are given an opportunity > > to recover and continue to work after some in-house cleanups. > > > > Such event can be caused by HW bugs, wrong congestion configurations > > and many more other scenarios. In such case, users are interested to > > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > > netdevice in trouble. > > > > The dump stack printed later was added in the commit b4192bbd85d2 > > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > > extra information, like list of the modules and which driver is involved. > > > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > > of modules rarely needed and can be collected later. > > > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > > large cluster setups. > > I'm of two minds about this. As much as printing a stack dump here is > not that useful indeed, it's certainly a good way of getting user's > attention. TX queue time outs should never happen, and there's a bunch > of log crawlers out there looking for kernel warnings. Rasdaemon is also able to capture this via trace_net_dev_xmit_timeout() and send it to ABRT too. So, I don't think this is a big problem. [...] > > diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c > > index 6c9595f1048a..c12530fe8b21 100644 > > --- a/net/sched/sch_generic.c > > +++ b/net/sched/sch_generic.c > > @@ -439,8 +439,9 @@ static void dev_watchdog(struct timer_list *t) > > > > if (some_queue_timedout) { > > trace_net_dev_xmit_timeout(dev, i); > > - WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", > > - dev->name, netdev_drivername(dev), i); > > + pr_info_once("NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", > > I'd say pr_err_once(). Or dev_err_once(). Or pr_warn(). Thanks.
On Thu, Apr 02, 2020 at 09:30:15PM -0700, Cong Wang wrote: > On Thu, Apr 2, 2020 at 6:02 PM David Miller <davem@davemloft.net> wrote: > > > > From: Leon Romanovsky <leon@kernel.org> > > Date: Thu, 2 Apr 2020 18:23:36 +0300 > > > > > In event of transmission timeout, the drivers are given an opportunity > > > to recover and continue to work after some in-house cleanups. > > > > > > Such event can be caused by HW bugs, wrong congestion configurations > > > and many more other scenarios. In such case, users are interested to > > > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > > > netdevice in trouble. > > > > > > The dump stack printed later was added in the commit b4192bbd85d2 > > > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > > > extra information, like list of the modules and which driver is involved. > > > > > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > > > of modules rarely needed and can be collected later. > > > > > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > > > large cluster setups. > > > > Software bugs play into these situations and on at least two or three > > occasions I know that the backtrace hinted at the cause of the bug. > > > > I don't see how a timer stack trace could help to debug this issue > in any scenario, the messages out of this stack trace are indeed > helpful. > > On the other hand, a stack trace does help to get some attention > via ABRT, but at least for us we now use rasdaemon to capture > this, so I am 100% fine to remove this stack trace. Thanks > > Thanks.
On Thu, Apr 02, 2020 at 06:02:18PM -0700, David Miller wrote: > From: Leon Romanovsky <leon@kernel.org> > Date: Thu, 2 Apr 2020 18:23:36 +0300 > > > In event of transmission timeout, the drivers are given an opportunity > > to recover and continue to work after some in-house cleanups. > > > > Such event can be caused by HW bugs, wrong congestion configurations > > and many more other scenarios. In such case, users are interested to > > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > > netdevice in trouble. > > > > The dump stack printed later was added in the commit b4192bbd85d2 > > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > > extra information, like list of the modules and which driver is involved. > > > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > > of modules rarely needed and can be collected later. > > > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > > large cluster setups. > > Software bugs play into these situations and on at least two or three > occasions I know that the backtrace hinted at the cause of the bug. > > I'm not applying this, sorry. Dave, In our case, it is HW bug and I'm looking for a way to silence dump stack. Do I have any way to avoid WARN here? It will be a little bit overkill to add some special flag to general netdev structure just to mark that mlx4 doesn't need this trace. Thanks
On Thu, Apr 02, 2020 at 03:57:23PM -0700, Jakub Kicinski wrote: > On Thu, 2 Apr 2020 18:23:36 +0300 Leon Romanovsky wrote: > > From: Leon Romanovsky <leonro@mellanox.com> > > > > In event of transmission timeout, the drivers are given an opportunity > > to recover and continue to work after some in-house cleanups. > > > > Such event can be caused by HW bugs, wrong congestion configurations > > and many more other scenarios. In such case, users are interested to > > get a simple "NETDEV WATCHDOG ... " print, which points to the relevant > > netdevice in trouble. > > > > The dump stack printed later was added in the commit b4192bbd85d2 > > ("net: Add a WARN_ON_ONCE() to the transmit timeout function") to give > > extra information, like list of the modules and which driver is involved. > > > > While the latter is already printed in "NETDEV WATCHDOG ... ", the list > > of modules rarely needed and can be collected later. > > > > So let's remove the WARN_ONCE() and make dmesg look more user-friendly in > > large cluster setups. > > I'm of two minds about this. As much as printing a stack dump here is > not that useful indeed, it's certainly a good way of getting user's > attention. TX queue time outs should never happen, and there's a bunch > of log crawlers out there looking for kernel warnings. > > Is there something special about IB here? The sender gets back > pressured into oblivion? There is nothing special here, it is HW bug on the specific device family (mlx4). My primary work is in RDMA domain, so this is how we get IB here. It is possible to get same warning with ETH too. > > > [ 281.170584] ------------[ cut here ]------------ > > [ 281.197120] NETDEV WATCHDOG: ib1 (mlx4_core): transmit queue 0 timed out > > [ 281.198521] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x232/0x240 > > [ 281.200259] Modules linked in: bonding ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx4_en ptp pps_core mlx4_ib mlx4_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlx4_core] > > [ 281.208290] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-J14907-G268960df60ee #1 > > [ 281.209954] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 > > [ 281.212281] RIP: 0010:dev_watchdog+0x232/0x240 > > [ 281.213260] Code: 85 c0 75 e8 eb a5 4c 89 ef c6 05 dd 9c c4 00 01 e8 d3 b6 fb ff 44 89 e1 4c 89 ee 48 c7 c7 40 54 0b 82 48 89 c2 e8 10 f1 a0 ff <0f> 0b eb 86 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 47 > > [ 281.217078] RSP: 0018:ffffc90000003e70 EFLAGS: 00010282 > > [ 281.218210] RAX: 0000000000000000 RBX: ffff8884521c3ce8 RCX: 0000000000000007 > > [ 281.219709] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff88846fc18230 > > [ 281.221206] RBP: ffff88846daad440 R08: 0000000000000000 R09: 0000000000000249 > > [ 281.222697] R10: 0000000000000774 R11: ffffc90000003d25 R12: 0000000000000000 > > [ 281.224202] R13: ffff88846daad000 R14: ffff88846daad440 R15: 0000000000000082 > > [ 281.225733] FS: 0000000000000000(0000) GS:ffff88846fc00000(0000) knlGS:0000000000000000 > > [ 281.227472] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 281.228713] CR2: 00007efd12565000 CR3: 000000043cd3a002 CR4: 0000000000160eb0 > > [ 281.230241] Call Trace: > > [ 281.230900] <IRQ> > > [ 281.231469] ? qdisc_put_unlocked+0x30/0x30 > > [ 281.232437] call_timer_fn+0x30/0x130 > > [ 281.233300] run_timer_softirq+0x18b/0x490 > > [ 281.234229] ? timerqueue_add+0x96/0xb0 > > [ 281.235119] ? enqueue_hrtimer+0x3d/0x90 > > [ 281.236029] __do_softirq+0xdf/0x2e5 > > [ 281.236864] irq_exit+0xa0/0xb0 > > [ 281.237621] smp_apic_timer_interrupt+0x72/0x120 > > [ 281.238652] apic_timer_interrupt+0xf/0x20 > > [ 281.239581] </IRQ> > > [ 281.240147] RIP: 0010:default_idle+0x2d/0x150 > > [ 281.241133] Code: 00 00 8b 05 3d 75 a7 00 41 54 55 65 8b 2d 6b e0 71 7e 53 85 c0 7f 29 8b 05 c8 97 f7 00 85 c0 7e 07 0f 00 2d 37 56 52 00 fb f4 <8b> 05 15 75 a7 00 65 8b 2d 46 e0 71 7e 85 c0 7f 7f 5b 5d 41 5c c3 > > [ 281.244935] RSP: 0018:ffffffff82203ea0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 > > [ 281.246584] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 > > [ 281.248082] RDX: 000000000010db42 RSI: ffffffff82203e40 RDI: 000000416d8a7440 > > [ 281.249581] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000041770da407 > > [ 281.251069] R10: 0000000000000264 R11: 0000000000000000 R12: ffffffff82211840 > > [ 281.252545] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff82211840 > > [ 281.254036] do_idle+0x1ee/0x210 > > [ 281.254809] cpu_startup_entry+0x19/0x20 > > [ 281.255713] start_kernel+0x490/0x4af > > [ 281.257577] secondary_startup_64+0xa4/0xb0 > > [ 281.259147] ---[ end trace 78f566c0214a2cb0 ]--- > > [ 281.260866] ib1: transmit timeout: latency 1120 msecs > > [ 281.262730] ib1: queue stopped 1, tx_head 167838, tx_tail 167710 > > > > Fixes: b4192bbd85d2 ("net: Add a WARN_ON_ONCE() to the transmit timeout function") > > Signed-off-by: Leon Romanovsky <leonro@mellanox.com> > > --- > > net/sched/sch_generic.c | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c > > index 6c9595f1048a..c12530fe8b21 100644 > > --- a/net/sched/sch_generic.c > > +++ b/net/sched/sch_generic.c > > @@ -439,8 +439,9 @@ static void dev_watchdog(struct timer_list *t) > > > > if (some_queue_timedout) { > > trace_net_dev_xmit_timeout(dev, i); > > - WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", > > - dev->name, netdev_drivername(dev), i); > > + pr_info_once("NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", > > I'd say pr_err_once(). Or dev_err_once(). I simply converted KERN_INFO to pr_info_once(), but will be happy to change it to your suggestion or to Cong's once Dave relax his decision about removing WARN_ONCE() here. Thanks > > > + dev->name, > > + netdev_drivername(dev), i); > > dev->netdev_ops->ndo_tx_timeout(dev, i); > > } > > if (!mod_timer(&dev->watchdog_timer, > > -- > > 2.25.1 > > >
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 6c9595f1048a..c12530fe8b21 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -439,8 +439,9 @@ static void dev_watchdog(struct timer_list *t) if (some_queue_timedout) { trace_net_dev_xmit_timeout(dev, i); - WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", - dev->name, netdev_drivername(dev), i); + pr_info_once("NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n", + dev->name, + netdev_drivername(dev), i); dev->netdev_ops->ndo_tx_timeout(dev, i); } if (!mod_timer(&dev->watchdog_timer,