| Message ID | 1309334082-9501-2-git-send-email-b32955@freescale.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Jun 29, 2011 at 03:54:40PM +0800, Huang Shijie wrote: > add GPMI-NFC support for imx23 and imx28. > > Signed-off-by: Huang Shijie <b32955@freescale.com> > --- > arch/arm/mach-mxs/Kconfig | 2 + > arch/arm/mach-mxs/include/mach/gpmi-nfc.h | 71 +++++++++++++++++++++++++++++ > 2 files changed, 73 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-mxs/include/mach/gpmi-nfc.h > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index 1d3985f..a5b753a 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -32,6 +32,7 @@ config MACH_MX23EVK > select SOC_IMX23 > select MXS_HAVE_AMBA_DUART > select MXS_HAVE_PLATFORM_AUART > + select MXS_HAVE_PLATFORM_GPMI_NFC This symbol is only introduced in patch 2, so the select doesn't belong here. > select MXS_HAVE_PLATFORM_MXS_MMC > select MXS_HAVE_PLATFORM_MXSFB > help > @@ -46,6 +47,7 @@ config MACH_MX28EVK > select MXS_HAVE_PLATFORM_AUART > select MXS_HAVE_PLATFORM_FEC > select MXS_HAVE_PLATFORM_FLEXCAN > + select MXS_HAVE_PLATFORM_GPMI_NFC > select MXS_HAVE_PLATFORM_MXS_MMC > select MXS_HAVE_PLATFORM_MXSFB > select MXS_OCOTP > diff --git a/arch/arm/mach-mxs/include/mach/gpmi-nfc.h b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h > new file mode 100644 > index 0000000..25fc605 > --- /dev/null > +++ b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h > @@ -0,0 +1,71 @@ > +/* > + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. > + */ > + > +#ifndef __INCLUDE_GPMI_NFC_H > +#define __INCLUDE_GPMI_NFC_H Applying the scheme other files in arch/arm/mach-mxs/include/mach this should read: #ifndef __MACH_MXS_GPMI_NFC_H__ (though it's not consistent, so you could choose between __MACH_MXS_GPMI_NFC_H__ __MACH_GPMI_NFC_H__ __MACH_GPMI_NFC_H ) > + > +/* The size of the resource is fixed. */ > +#define RES_SIZE 6 > + > +/* Resource names for the GPMI NFC driver. */ > +#define GPMI_NFC_GPMI_REGS_ADDR_RES_NAME "GPMI NFC GPMI Registers" > +#define GPMI_NFC_GPMI_INTERRUPT_RES_NAME "GPMI NFC GPMI Interrupt" > +#define GPMI_NFC_BCH_REGS_ADDR_RES_NAME "GPMI NFC BCH Registers" > +#define GPMI_NFC_BCH_INTERRUPT_RES_NAME "GPMI NFC BCH Interrupt" > +#define GPMI_NFC_DMA_CHANNELS_RES_NAME "GPMI NFC DMA Channels" > +#define GPMI_NFC_DMA_INTERRUPT_RES_NAME "GPMI NFC DMA Interrupt" > + > +/** > + * struct gpmi_nfc_platform_data - GPMI NFC driver platform data. > + * > + * This structure communicates platform-specific information to the GPMI NFC > + * driver that can't be expressed as resources. > + * > + * @platform_init: A pointer to a function the driver will call to > + * initialize the platform (e.g., set up the pin mux). > + * @platform_exit: A pointer to a function the driver will call to > + * exit the platform (e.g., free pins). > + * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and > + * from the NAND Flash device, in nanoseconds. > + * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and > + * from the NAND Flash device, in nanoseconds. > + * @max_chip_count: The maximum number of chips for which the driver > + * should configure the hardware. This value most > + * likely reflects the number of pins that are > + * connected to a NAND Flash device. If this is > + * greater than the SoC hardware can support, the > + * driver will print a message and fail to initialize. > + * @partitions: An optional pointer to an array of partition > + * descriptions. > + * @partition_count: The number of elements in the partitions array. > + */ > +struct gpmi_nfc_platform_data { > + /* SoC hardware information. */ > + int (*platform_init)(void); > + void (*platform_exit)(void); > + > + /* NAND Flash information. */ > + unsigned int min_prop_delay_in_ns; > + unsigned int max_prop_delay_in_ns; > + unsigned int max_chip_count; > + > + /* Medium information. */ > + struct mtd_partition *partitions; > + unsigned partition_count; > +}; > +#endif Best regards Uwe
Hi: > On Wed, Jun 29, 2011 at 03:54:40PM +0800, Huang Shijie wrote: >> add GPMI-NFC support for imx23 and imx28. >> >> Signed-off-by: Huang Shijie<b32955@freescale.com> >> --- >> arch/arm/mach-mxs/Kconfig | 2 + >> arch/arm/mach-mxs/include/mach/gpmi-nfc.h | 71 +++++++++++++++++++++++++++++ >> 2 files changed, 73 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/mach-mxs/include/mach/gpmi-nfc.h >> >> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig >> index 1d3985f..a5b753a 100644 >> --- a/arch/arm/mach-mxs/Kconfig >> +++ b/arch/arm/mach-mxs/Kconfig >> @@ -32,6 +32,7 @@ config MACH_MX23EVK >> select SOC_IMX23 >> select MXS_HAVE_AMBA_DUART >> select MXS_HAVE_PLATFORM_AUART >> + select MXS_HAVE_PLATFORM_GPMI_NFC > This symbol is only introduced in patch 2, so the select doesn't belong > here. > ok. I can move the symbol to this patch. thanks. >> select MXS_HAVE_PLATFORM_MXS_MMC >> select MXS_HAVE_PLATFORM_MXSFB >> help >> @@ -46,6 +47,7 @@ config MACH_MX28EVK >> select MXS_HAVE_PLATFORM_AUART >> select MXS_HAVE_PLATFORM_FEC >> select MXS_HAVE_PLATFORM_FLEXCAN >> + select MXS_HAVE_PLATFORM_GPMI_NFC >> select MXS_HAVE_PLATFORM_MXS_MMC >> select MXS_HAVE_PLATFORM_MXSFB >> select MXS_OCOTP >> diff --git a/arch/arm/mach-mxs/include/mach/gpmi-nfc.h b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h >> new file mode 100644 >> index 0000000..25fc605 >> --- /dev/null >> +++ b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h >> @@ -0,0 +1,71 @@ >> +/* >> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along >> + * with this program; if not, write to the Free Software Foundation, Inc., >> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. >> + */ >> + >> +#ifndef __INCLUDE_GPMI_NFC_H >> +#define __INCLUDE_GPMI_NFC_H > Applying the scheme other files in arch/arm/mach-mxs/include/mach this > should read: > > #ifndef __MACH_MXS_GPMI_NFC_H__ > > (though it's not consistent, so you could choose between > > __MACH_MXS_GPMI_NFC_H__ > __MACH_GPMI_NFC_H__ > __MACH_GPMI_NFC_H > > ) thanks. I will change it in the next version. Best Regards Huang Shijie >> + >> +/* The size of the resource is fixed. */ >> +#define RES_SIZE 6 >> + >> +/* Resource names for the GPMI NFC driver. */ >> +#define GPMI_NFC_GPMI_REGS_ADDR_RES_NAME "GPMI NFC GPMI Registers" >> +#define GPMI_NFC_GPMI_INTERRUPT_RES_NAME "GPMI NFC GPMI Interrupt" >> +#define GPMI_NFC_BCH_REGS_ADDR_RES_NAME "GPMI NFC BCH Registers" >> +#define GPMI_NFC_BCH_INTERRUPT_RES_NAME "GPMI NFC BCH Interrupt" >> +#define GPMI_NFC_DMA_CHANNELS_RES_NAME "GPMI NFC DMA Channels" >> +#define GPMI_NFC_DMA_INTERRUPT_RES_NAME "GPMI NFC DMA Interrupt" >> + >> +/** >> + * struct gpmi_nfc_platform_data - GPMI NFC driver platform data. >> + * >> + * This structure communicates platform-specific information to the GPMI NFC >> + * driver that can't be expressed as resources. >> + * >> + * @platform_init: A pointer to a function the driver will call to >> + * initialize the platform (e.g., set up the pin mux). >> + * @platform_exit: A pointer to a function the driver will call to >> + * exit the platform (e.g., free pins). >> + * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and >> + * from the NAND Flash device, in nanoseconds. >> + * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and >> + * from the NAND Flash device, in nanoseconds. >> + * @max_chip_count: The maximum number of chips for which the driver >> + * should configure the hardware. This value most >> + * likely reflects the number of pins that are >> + * connected to a NAND Flash device. If this is >> + * greater than the SoC hardware can support, the >> + * driver will print a message and fail to initialize. >> + * @partitions: An optional pointer to an array of partition >> + * descriptions. >> + * @partition_count: The number of elements in the partitions array. >> + */ >> +struct gpmi_nfc_platform_data { >> + /* SoC hardware information. */ >> + int (*platform_init)(void); >> + void (*platform_exit)(void); >> + >> + /* NAND Flash information. */ >> + unsigned int min_prop_delay_in_ns; >> + unsigned int max_prop_delay_in_ns; >> + unsigned int max_chip_count; >> + >> + /* Medium information. */ >> + struct mtd_partition *partitions; >> + unsigned partition_count; >> +}; >> +#endif > Best regards > Uwe >
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 1d3985f..a5b753a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -32,6 +32,7 @@ config MACH_MX23EVK select SOC_IMX23 select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_GPMI_NFC select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB help @@ -46,6 +47,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_GPMI_NFC select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP diff --git a/arch/arm/mach-mxs/include/mach/gpmi-nfc.h b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h new file mode 100644 index 0000000..25fc605 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __INCLUDE_GPMI_NFC_H +#define __INCLUDE_GPMI_NFC_H + +/* The size of the resource is fixed. */ +#define RES_SIZE 6 + +/* Resource names for the GPMI NFC driver. */ +#define GPMI_NFC_GPMI_REGS_ADDR_RES_NAME "GPMI NFC GPMI Registers" +#define GPMI_NFC_GPMI_INTERRUPT_RES_NAME "GPMI NFC GPMI Interrupt" +#define GPMI_NFC_BCH_REGS_ADDR_RES_NAME "GPMI NFC BCH Registers" +#define GPMI_NFC_BCH_INTERRUPT_RES_NAME "GPMI NFC BCH Interrupt" +#define GPMI_NFC_DMA_CHANNELS_RES_NAME "GPMI NFC DMA Channels" +#define GPMI_NFC_DMA_INTERRUPT_RES_NAME "GPMI NFC DMA Interrupt" + +/** + * struct gpmi_nfc_platform_data - GPMI NFC driver platform data. + * + * This structure communicates platform-specific information to the GPMI NFC + * driver that can't be expressed as resources. + * + * @platform_init: A pointer to a function the driver will call to + * initialize the platform (e.g., set up the pin mux). + * @platform_exit: A pointer to a function the driver will call to + * exit the platform (e.g., free pins). + * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and + * from the NAND Flash device, in nanoseconds. + * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and + * from the NAND Flash device, in nanoseconds. + * @max_chip_count: The maximum number of chips for which the driver + * should configure the hardware. This value most + * likely reflects the number of pins that are + * connected to a NAND Flash device. If this is + * greater than the SoC hardware can support, the + * driver will print a message and fail to initialize. + * @partitions: An optional pointer to an array of partition + * descriptions. + * @partition_count: The number of elements in the partitions array. + */ +struct gpmi_nfc_platform_data { + /* SoC hardware information. */ + int (*platform_init)(void); + void (*platform_exit)(void); + + /* NAND Flash information. */ + unsigned int min_prop_delay_in_ns; + unsigned int max_prop_delay_in_ns; + unsigned int max_chip_count; + + /* Medium information. */ + struct mtd_partition *partitions; + unsigned partition_count; +}; +#endif
add GPMI-NFC support for imx23 and imx28. Signed-off-by: Huang Shijie <b32955@freescale.com> --- arch/arm/mach-mxs/Kconfig | 2 + arch/arm/mach-mxs/include/mach/gpmi-nfc.h | 71 +++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/include/mach/gpmi-nfc.h