| Message ID | 20200228020757.10513-8-rentao.bupt@gmail.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | aspeed-g6: enable usb support | expand |
On Thu, Feb 27, 2020 at 06:07:57PM -0800, rentao.bupt@gmail.com wrote: > From: Tao Ren <rentao.bupt@gmail.com> > > Add device tree binding documentation for the Aspeed USB 2.0 Virtual HUb > Controller. > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> > Reviewed-by: Joel Stanley <joel@jms.id.au> > --- > Changes in v6: > - added 2 required properties into example and passed "make > dt_binding_check". > Changes in v5: > - updated maintainer to Ben. > - refined patch description per Joel's suggestion. > No change in v2/v3/v4: > - the patch is added to the patch series since v4. > > .../bindings/usb/aspeed,usb-vhub.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > new file mode 100644 > index 000000000000..b9f33310e9a2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later Dual license new bindings please. (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2020 Facebook Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ASPEED USB 2.0 Virtual Hub Controller > + > +maintainers: > + - Benjamin Herrenschmidt <benh@kernel.crashing.org> > + > +description: |+ > + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub > + register and several sets of Device and Endpoint registers to support > + the Virtual Hub's downstream USB devices. > + > + Supported number of devices and endpoints vary depending on hardware > + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices > + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream > + devices and 21 generic endpoints. > + > +properties: > + compatible: > + enum: > + - aspeed,ast2400-usb-vhub > + - aspeed,ast2500-usb-vhub > + - aspeed,ast2600-usb-vhub > + > + reg: > + maxItems: 1 > + description: Common configuration registers If 'Common' means something specific to this block, then keep. Otherwise, you can drop ti. > + > + clocks: > + maxItems: 1 > + description: The Virtual Hub Controller clock gate Drop this. > + > + interrupts: > + maxItems: 1 > + > + aspeed,vhub-downstream-ports: > + description: Number of downstream ports supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 Constraints? 'maximum: 5' ? default? > + > + aspeed,vhub-generic-endpoints: > + description: Number of generic endpoints supported by the Virtual Hub > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 Constraints? > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + - aspeed,vhub-downstream-ports > + - aspeed,vhub-generic-endpoints > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/aspeed-clock.h> > + vhub: usb-vhub@1e6a0000 { > + compatible = "aspeed,ast2500-usb-vhub"; > + reg = <0x1e6a0000 0x300>; > + interrupts = <5>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > + aspeed,vhub-downstream-ports = <5>; > + aspeed,vhub-generic-endpoints = <15>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb2ad_default>; > + }; > -- > 2.17.1 >
Hi Rob, Thanks for the careful review and I've addressed all your feedback in v7 (based on my understanding). Please kindly let me know if you have further suggestions. Cheers, Tao On Mon, Mar 02, 2020 at 05:47:44PM -0600, Rob Herring wrote: > On Thu, Feb 27, 2020 at 06:07:57PM -0800, rentao.bupt@gmail.com wrote: > > From: Tao Ren <rentao.bupt@gmail.com> > > > > Add device tree binding documentation for the Aspeed USB 2.0 Virtual HUb > > Controller. > > > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > --- > > Changes in v6: > > - added 2 required properties into example and passed "make > > dt_binding_check". > > Changes in v5: > > - updated maintainer to Ben. > > - refined patch description per Joel's suggestion. > > No change in v2/v3/v4: > > - the patch is added to the patch series since v4. > > > > .../bindings/usb/aspeed,usb-vhub.yaml | 73 +++++++++++++++++++ > > 1 file changed, 73 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > new file mode 100644 > > index 000000000000..b9f33310e9a2 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml > > @@ -0,0 +1,73 @@ > > +# SPDX-License-Identifier: GPL-2.0-or-later > > Dual license new bindings please. > > (GPL-2.0-only OR BSD-2-Clause) > > > +# Copyright (c) 2020 Facebook Inc. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ASPEED USB 2.0 Virtual Hub Controller > > + > > +maintainers: > > + - Benjamin Herrenschmidt <benh@kernel.crashing.org> > > + > > +description: |+ > > + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub > > + register and several sets of Device and Endpoint registers to support > > + the Virtual Hub's downstream USB devices. > > + > > + Supported number of devices and endpoints vary depending on hardware > > + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices > > + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream > > + devices and 21 generic endpoints. > > + > > +properties: > > + compatible: > > + enum: > > + - aspeed,ast2400-usb-vhub > > + - aspeed,ast2500-usb-vhub > > + - aspeed,ast2600-usb-vhub > > + > > + reg: > > + maxItems: 1 > > + description: Common configuration registers > > If 'Common' means something specific to this block, then keep. > Otherwise, you can drop ti. > > > + > > + clocks: > > + maxItems: 1 > > + description: The Virtual Hub Controller clock gate > > Drop this. > > > + > > + interrupts: > > + maxItems: 1 > > + > > + aspeed,vhub-downstream-ports: > > + description: Number of downstream ports supported by the Virtual Hub > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > Constraints? > > 'maximum: 5' ? > > default? > > > + > > + aspeed,vhub-generic-endpoints: > > + description: Number of generic endpoints supported by the Virtual Hub > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > Constraints? > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - interrupts > > + - aspeed,vhub-downstream-ports > > + - aspeed,vhub-generic-endpoints > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/aspeed-clock.h> > > + vhub: usb-vhub@1e6a0000 { > > + compatible = "aspeed,ast2500-usb-vhub"; > > + reg = <0x1e6a0000 0x300>; > > + interrupts = <5>; > > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > > + aspeed,vhub-downstream-ports = <5>; > > + aspeed,vhub-generic-endpoints = <15>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usb2ad_default>; > > + }; > > -- > > 2.17.1 > >
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml new file mode 100644 index 000000000000..b9f33310e9a2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Virtual Hub Controller + +maintainers: + - Benjamin Herrenschmidt <benh@kernel.crashing.org> + +description: |+ + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub + register and several sets of Device and Endpoint registers to support + the Virtual Hub's downstream USB devices. + + Supported number of devices and endpoints vary depending on hardware + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream + devices and 21 generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2400-usb-vhub + - aspeed,ast2500-usb-vhub + - aspeed,ast2600-usb-vhub + + reg: + maxItems: 1 + description: Common configuration registers + + clocks: + maxItems: 1 + description: The Virtual Hub Controller clock gate + + interrupts: + maxItems: 1 + + aspeed,vhub-downstream-ports: + description: Number of downstream ports supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + aspeed,vhub-generic-endpoints: + description: Number of generic endpoints supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - interrupts + - aspeed,vhub-downstream-ports + - aspeed,vhub-generic-endpoints + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + };