Message ID | 659397895.105558.1308590880922.JavaMail.root@sz0140a.emeryville.ca.mail.comcast.net |
---|---|
State | New |
Headers | show |
On Mon, Jun 20, 2011 at 11:28 AM, <johnlinn@comcast.net> wrote: > Hi Arnd, > > Please pull this commit to support the Xilinx Zynq platform into your tree. > > This patch has been out in the community and mailing list for a while. It has > also been in linux-next for a while. > > Thanks, > John Linn > > The following changes since commit 2c53b436a30867eb6b47dd7bab23ba638d1fb0d2: > Linus Torvalds (1): > Linux 3.0-rc3 > > are available in the git repository at: > > git://git.xilinx.com/arm-next > > Grant Likely (1): > ARM: Xilinx: Adding Xilinx board support Oops, this isn't right. You should respin the branch to credit you as the author. All I did was squash a bunch of patches together. g. > > Documentation/devicetree/bindings/arm/xilinx.txt | 7 + > arch/arm/Kconfig | 14 + > arch/arm/Makefile | 2 + > arch/arm/boot/dts/zynq-ep107.dts | 52 ++++ > arch/arm/mach-zynq/Makefile | 6 + > arch/arm/mach-zynq/Makefile.boot | 3 + > arch/arm/mach-zynq/board_dt.c | 37 +++ > arch/arm/mach-zynq/common.c | 102 ++++++++ > arch/arm/mach-zynq/common.h | 29 ++ > arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ > arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +++ > arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ > arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ > arch/arm/mach-zynq/include/mach/io.h | 33 +++ > arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ > arch/arm/mach-zynq/include/mach/memory.h | 22 ++ > arch/arm/mach-zynq/include/mach/system.h | 28 ++ > arch/arm/mach-zynq/include/mach/timex.h | 23 ++ > arch/arm/mach-zynq/include/mach/uart.h | 25 ++ > arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++++ > arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ > arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 ++++ > arch/arm/mach-zynq/timer.c | 298 ++++++++++++++++++++++ > arch/arm/mm/Kconfig >
> On Mon, Jun 20, 2011 at 11:28 AM, <johnlinn@comcast.net> wrote: > > Hi Arnd, > > > > Please pull this commit to support the Xilinx Zynq platform into > > your tree. > > > > This patch has been out in the community and mailing list for a > > while. It has > > also been in linux-next for a while. > > > > Thanks, > > John Linn > > > > The following changes since commit > > 2c53b436a30867eb6b47dd7bab23ba638d1fb0d2: > > Linus Torvalds (1): > > Linux 3.0-rc3 > > > > are available in the git repository at: > > > > git://git.xilinx.com/arm-next > > > > Grant Likely (1): > > ARM: Xilinx: Adding Xilinx board support > > Oops, this isn't right. You should respin the branch to credit you as > the author. All I did was squash a bunch of patches together. > > g. Ok, I'll respin the patch to remove that and send out the pull request again. Thanks, John > > > > > Documentation/devicetree/bindings/arm/xilinx.txt | 7 + > > arch/arm/Kconfig | 14 + > > arch/arm/Makefile | 2 + > > arch/arm/boot/dts/zynq-ep107.dts | 52 ++++ > > arch/arm/mach-zynq/Makefile | 6 + > > arch/arm/mach-zynq/Makefile.boot | 3 + > > arch/arm/mach-zynq/board_dt.c | 37 +++ > > arch/arm/mach-zynq/common.c | 102 ++++++++ > > arch/arm/mach-zynq/common.h | 29 ++ > > arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ > > arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +++ > > arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ > > arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ > > arch/arm/mach-zynq/include/mach/io.h | 33 +++ > > arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ > > arch/arm/mach-zynq/include/mach/memory.h | 22 ++ > > arch/arm/mach-zynq/include/mach/system.h | 28 ++ > > arch/arm/mach-zynq/include/mach/timex.h | 23 ++ > > arch/arm/mach-zynq/include/mach/uart.h | 25 ++ > > arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++++ > > arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ > > arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 ++++ > > arch/arm/mach-zynq/timer.c | 298 > > ++++++++++++++++++++++ > > arch/arm/mm/Kconfig > > > > > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd.
On Mon, Jun 20, 2011 at 05:28:00PM +0000, johnlinn@comcast.net wrote: > Documentation/devicetree/bindings/arm/xilinx.txt | 7 + > arch/arm/Kconfig | 14 + > arch/arm/Makefile | 2 + > arch/arm/boot/dts/zynq-ep107.dts | 52 ++++ > arch/arm/mach-zynq/Makefile | 6 + > arch/arm/mach-zynq/Makefile.boot | 3 + > arch/arm/mach-zynq/board_dt.c | 37 +++ > arch/arm/mach-zynq/common.c | 102 ++++++++ > arch/arm/mach-zynq/common.h | 29 ++ > arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ > arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +++ > arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ > arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ > arch/arm/mach-zynq/include/mach/io.h | 33 +++ > arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ > arch/arm/mach-zynq/include/mach/memory.h | 22 ++ > arch/arm/mach-zynq/include/mach/system.h | 28 ++ > arch/arm/mach-zynq/include/mach/timex.h | 23 ++ > arch/arm/mach-zynq/include/mach/uart.h | 25 ++ > arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++++ > arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ > arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 ++++ > arch/arm/mach-zynq/timer.c | 298 ++++++++++++++++++++++ > arch/arm/mm/Kconfig Looks like the diffstat is manged as well.
> On Mon, Jun 20, 2011 at 05:28:00PM +0000, johnlinn@comcast.net wrote: > > Documentation/devicetree/bindings/arm/xilinx.txt | 7 + > > arch/arm/Kconfig | 14 + > > arch/arm/Makefile | 2 + > > arch/arm/boot/dts/zynq-ep107.dts | 52 ++++ > > arch/arm/mach-zynq/Makefile | 6 + > > arch/arm/mach-zynq/Makefile.boot | 3 + > > arch/arm/mach-zynq/board_dt.c | 37 +++ > > arch/arm/mach-zynq/common.c | 102 ++++++++ > > arch/arm/mach-zynq/common.h | 29 ++ > > arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ > > arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +++ > > arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ > > arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ > > arch/arm/mach-zynq/include/mach/io.h | 33 +++ > > arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ > > arch/arm/mach-zynq/include/mach/memory.h | 22 ++ > > arch/arm/mach-zynq/include/mach/system.h | 28 ++ > > arch/arm/mach-zynq/include/mach/timex.h | 23 ++ > > arch/arm/mach-zynq/include/mach/uart.h | 25 ++ > > arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++++ > > arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ > > arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 ++++ > > arch/arm/mach-zynq/timer.c | 298 ++++++++++++++++++++++ > > arch/arm/mm/Kconfig > > Looks like the diffstat is manged as well. Thanks Russell, that was my mistake if your meaning it's not complete. I thought the rest wasn't needed. I'll include the entire diffstat on the next pull request also. -- John
Yeah, don't mess with the output of git request-pull. You should include the whole thing in a pull req. g. On Mon, Jun 20, 2011 at 11:55 AM, <johnlinn@comcast.net> wrote: >> On Mon, Jun 20, 2011 at 05:28:00PM +0000, johnlinn@comcast.net wrote: >> > Documentation/devicetree/bindings/arm/xilinx.txt | 7 + >> > arch/arm/Kconfig | 14 + >> > arch/arm/Makefile | 2 + >> > arch/arm/boot/dts/zynq-ep107.dts | 52 ++++ >> > arch/arm/mach-zynq/Makefile | 6 + >> > arch/arm/mach-zynq/Makefile.boot | 3 + >> > arch/arm/mach-zynq/board_dt.c | 37 +++ >> > arch/arm/mach-zynq/common.c | 102 ++++++++ >> > arch/arm/mach-zynq/common.h | 29 ++ >> > arch/arm/mach-zynq/include/mach/clkdev.h | 32 +++ >> > arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +++ >> > arch/arm/mach-zynq/include/mach/entry-macro.S | 30 +++ >> > arch/arm/mach-zynq/include/mach/hardware.h | 18 ++ >> > arch/arm/mach-zynq/include/mach/io.h | 33 +++ >> > arch/arm/mach-zynq/include/mach/irqs.h | 21 ++ >> > arch/arm/mach-zynq/include/mach/memory.h | 22 ++ >> > arch/arm/mach-zynq/include/mach/system.h | 28 ++ >> > arch/arm/mach-zynq/include/mach/timex.h | 23 ++ >> > arch/arm/mach-zynq/include/mach/uart.h | 25 ++ >> > arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++++ >> > arch/arm/mach-zynq/include/mach/vmalloc.h | 20 ++ >> > arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 ++++ >> > arch/arm/mach-zynq/timer.c | 298 ++++++++++++++++++++++ >> > arch/arm/mm/Kconfig >> >> Looks like the diffstat is manged as well. > > Thanks Russell, that was my mistake if your meaning it's not complete. > > I thought the rest wasn't needed. I'll include the entire diffstat on the > next pull request also. > > -- John >
On Mon, Jun 20, 2011 at 12:28:53PM -0600, Grant Likely wrote: > Yeah, don't mess with the output of git request-pull. You should > include the whole thing in a pull req. For background the reasoning is that one of the things people check when they do a pull is that the changes they end up with look like those in the pull request, if only to make sure that there wasn't a mistake with the URL or something.