Message ID | 20200224235632.5163-1-f.fainelli@gmail.com |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | [net] net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec | expand |
On Mon, 24 Feb 2020 15:56:32 -0800, Florian Fainelli <f.fainelli@gmail.com> wrote: > We are still experiencing some packet loss with the existing advanced > congestion buffering (ACB) settings with the IMP port configured for > 2Gb/sec, so revert to conservative link speeds that do not produce > packet loss until this is resolved. > > Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") > Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com> Date: Mon, 24 Feb 2020 15:56:32 -0800 > We are still experiencing some packet loss with the existing advanced > congestion buffering (ACB) settings with the IMP port configured for > 2Gb/sec, so revert to conservative link speeds that do not produce > packet loss until this is resolved. > > Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") > Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Applied and queued up for v5.5 -stable. Thanks.
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index d1955543acd1..b0f5280a83cb 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -69,8 +69,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) /* Force link status for IMP port */ reg = core_readl(priv, offset); reg |= (MII_SW_OR | LINK_STS); - if (priv->type == BCM7278_DEVICE_ID) - reg |= GMII_SPEED_UP_2G; + reg &= ~GMII_SPEED_UP_2G; core_writel(priv, reg, offset); /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/bcm_sf2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)