| Message ID | 1581504934-19540-1-git-send-email-hayashi.kunihiko@socionext.com |
|---|---|
| State | Accepted |
| Delegated to: | David Miller |
| Headers | show |
| Series | [net,v2] net: ethernet: ave: Add capability of rgmii-id mode | expand |
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Date: Wed, 12 Feb 2020 19:55:34 +0900 > This allows you to specify the type of rgmii-id that will enable phy > internal delay in ethernet phy-mode. > > This adds all RGMII cases to all of get_pinmode() except LD11, because LD11 > SoC doesn't support RGMII due to the constraint of the hardware. When RGMII > phy mode is specified in the devicetree for LD11, the driver will abort > with an error. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > Changes since v1: > - Add description about LD11 to the commit message Applied, thank you.
diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index b703242..67ddf78 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -1810,6 +1810,9 @@ static int ave_pro4_get_pinmode(struct ave_private *priv, break; case PHY_INTERFACE_MODE_MII: case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: priv->pinmode_val = 0; break; default: @@ -1854,6 +1857,9 @@ static int ave_ld20_get_pinmode(struct ave_private *priv, priv->pinmode_val = SG_ETPINMODE_RMII(0); break; case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: priv->pinmode_val = 0; break; default: @@ -1876,6 +1882,9 @@ static int ave_pxs3_get_pinmode(struct ave_private *priv, priv->pinmode_val = SG_ETPINMODE_RMII(arg); break; case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: priv->pinmode_val = 0; break; default:
This allows you to specify the type of rgmii-id that will enable phy internal delay in ethernet phy-mode. This adds all RGMII cases to all of get_pinmode() except LD11, because LD11 SoC doesn't support RGMII due to the constraint of the hardware. When RGMII phy mode is specified in the devicetree for LD11, the driver will abort with an error. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- Changes since v1: - Add description about LD11 to the commit message drivers/net/ethernet/socionext/sni_ave.c | 9 +++++++++ 1 file changed, 9 insertions(+)