Message ID | 1578630784-962-1-git-send-email-daidavid1@codeaurora.org |
---|---|
Headers | show |
Series | Split SDM845 interconnect nodes and consolidate RPMh support | expand |
On Thu, Jan 9, 2020 at 8:33 PM David Dai <daidavid1@codeaurora.org> wrote: > > Add the DT nodes for each of the Network-On-Chip interconnect > buses found on SDM845 based platform and redefine the rsc_hlos > child node as a bcm-voter device to better represent the hardware. > > Signed-off-by: David Dai <daidavid1@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 61 ++++++++++++++++++++++++++++++++++-- > 1 file changed, 58 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index ddb1f23..7c617a9 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -1364,6 +1364,55 @@ > interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; > }; > > + mem_noc: interconnect@1380000 { > + compatible = "qcom,sdm845-mem-noc"; > + reg = <0 0x01380000 0 0x27200>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + dc_noc: interconnect@14e0000 { > + compatible = "qcom,sdm845-dc-noc"; > + reg = <0 0x014e0000 0 0x400>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + config_noc: interconnect@1500000 { > + compatible = "qcom,sdm845-config-noc"; > + reg = <0 0x01500000 0 0x5080>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + system_noc: interconnect@1620000 { > + compatible = "qcom,sdm845-system-noc"; > + reg = <0 0x01620000 0 0x18080>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + aggre1_noc: interconnect@16e0000 { > + compatible = "qcom,sdm845-aggre1-noc"; > + reg = <0 0x016e0000 0 0xd080>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + aggre2_noc: interconnect@1700000 { > + compatible = "qcom,sdm845-aggre2-noc"; > + reg = <0 0x01700000 0 0x3b100>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + mmss_noc: interconnect@1740000 { > + compatible = "qcom,sdm845-mmss-noc"; > + reg = <0 0x01740000 0 0x1c1000>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > ufs_mem_hc: ufshc@1d84000 { > compatible = "qcom,sdm845-ufshc", "qcom,ufshc", > "jedec,ufs-2.0"; > @@ -3100,6 +3149,13 @@ > #mbox-cells = <1>; > }; > > + gladiator_noc: interconnect@17900000 { > + compatible = "qcom,sdm845-gladiator-noc"; > + reg = <0 0x17900000 0 0xd080>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > apps_rsc: rsc@179c0000 { > label = "apps_rsc"; > compatible = "qcom,rpmh-rsc"; > @@ -3174,9 +3230,8 @@ > }; > }; > > - rsc_hlos: interconnect { > - compatible = "qcom,sdm845-rsc-hlos"; > - #interconnect-cells = <1>; With this reworking of the bindings the examples in these files are now broken: Documentation/devicetree/bindings/display/msm/gpu.txt Documentation/devicetree/bindings/display/msm/dpu.txt It would be nice to fix them up in a subsequent change. -Evan
On Thu, Jan 9, 2020 at 8:33 PM David Dai <daidavid1@codeaurora.org> wrote: > > Add bcm voter driver and add support for RPMh specific interconnect providers > which implements the set and aggregate functionalities that translates > bandwidth requests into RPMh messages. These modules provide a common set of > functionalities for all Qualcomm RPMh based interconnect providers and > should help reduce code duplication when adding new providers. > > Signed-off-by: David Dai <daidavid1@codeaurora.org> This was a little tough to wrap my head around, but then I understood that most of it was a copy of functions from sdm845.c, which are later deleted in patch 5 when sdm845.c uses the bcm-voter driver. > --- > drivers/interconnect/qcom/Kconfig | 8 + > drivers/interconnect/qcom/Makefile | 4 + > drivers/interconnect/qcom/bcm-voter.c | 363 ++++++++++++++++++++++++++++++++++ > drivers/interconnect/qcom/bcm-voter.h | 28 +++ > drivers/interconnect/qcom/icc-rpmh.c | 158 +++++++++++++++ > drivers/interconnect/qcom/icc-rpmh.h | 151 ++++++++++++++ > 6 files changed, 712 insertions(+) > create mode 100644 drivers/interconnect/qcom/bcm-voter.c > create mode 100644 drivers/interconnect/qcom/bcm-voter.h > create mode 100644 drivers/interconnect/qcom/icc-rpmh.c > create mode 100644 drivers/interconnect/qcom/icc-rpmh.h > > diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig > index 2f9304d..cd100a4 100644 > --- a/drivers/interconnect/qcom/Kconfig > +++ b/drivers/interconnect/qcom/Kconfig > @@ -5,6 +5,9 @@ config INTERCONNECT_QCOM > help > Support for Qualcomm's Network-on-Chip interconnect hardware. > > +config INTERCONNECT_QCOM_BCM_VOTER > + tristate > + > config INTERCONNECT_QCOM_MSM8974 > tristate "Qualcomm MSM8974 interconnect driver" > depends on INTERCONNECT_QCOM > @@ -23,10 +26,15 @@ config INTERCONNECT_QCOM_QCS404 > This is a driver for the Qualcomm Network-on-Chip on qcs404-based > platforms. > > +config INTERCONNECT_QCOM_RPMH > + tristate > + > config INTERCONNECT_QCOM_SDM845 > tristate "Qualcomm SDM845 interconnect driver" > depends on INTERCONNECT_QCOM > depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST > + select INTERCONNECT_QCOM_RPMH > + select INTERCONNECT_QCOM_BCM_VOTER > help > This is a driver for the Qualcomm Network-on-Chip on sdm845-based > platforms. > diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile > index 9adf9e3..9317fa7 100644 > --- a/drivers/interconnect/qcom/Makefile > +++ b/drivers/interconnect/qcom/Makefile > @@ -4,8 +4,12 @@ qnoc-msm8974-objs := msm8974.o > qnoc-qcs404-objs := qcs404.o > qnoc-sdm845-objs := sdm845.o > icc-smd-rpm-objs := smd-rpm.o > +icc-bcm-voter-objs := bcm-voter.o > +icc-rpmh-obj := icc-rpmh.o > > +obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o > obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o > obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o > +obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o > obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o > obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o > diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c > new file mode 100644 > index 0000000..a65680e > --- /dev/null > +++ b/drivers/interconnect/qcom/bcm-voter.c > @@ -0,0 +1,363 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * > + */ > +#include <linux/interconnect-provider.h> > +#include <linux/list_sort.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > + > +#include <soc/qcom/rpmh.h> > +#include <soc/qcom/tcs.h> > + > +#include "bcm-voter.h" > +#include "icc-rpmh.h" > + > +static LIST_HEAD(bcm_voters); Doesn't this need a lock? > + > +/** > + * struct bcm_voter - Bus Clock Manager voter > + * @dev: reference to the device that communicates with the BCM > + * @np: reference to the device node to match bcm voters > + * @lock: mutex to protect commit and wake/sleep lists in the voter > + * @commit_list: list containing bcms to be committed to hardware > + * @ws_list: list containing bcms that have different wake/sleep votes > + * @voter_node: list of bcm voters > + */ > +struct bcm_voter { > + struct device *dev; > + struct device_node *np; > + struct mutex lock; > + struct list_head commit_list; > + struct list_head ws_list; > + struct list_head voter_node; > +}; > + > +static int cmp_vcd(void *priv, struct list_head *a, struct list_head *b) > +{ > + const struct qcom_icc_bcm *bcm_a = > + list_entry(a, struct qcom_icc_bcm, list); > + const struct qcom_icc_bcm *bcm_b = > + list_entry(b, struct qcom_icc_bcm, list); > + > + if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd) > + return -1; > + else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd) > + return 0; > + else > + return 1; > +} > + > +static void bcm_aggregate(struct qcom_icc_bcm *bcm) > +{ > + size_t i, bucket; > + u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0}; > + u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0}; > + u64 temp; > + > + for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) { > + for (i = 0; i < bcm->num_nodes; i++) { > + temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width; > + do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels); > + agg_avg[bucket] = max(agg_avg[bucket], temp); > + > + temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width; > + do_div(temp, bcm->nodes[i]->buswidth); > + agg_peak[bucket] = max(agg_peak[bucket], temp); > + } > + > + temp = agg_avg[bucket] * 1000ULL; > + do_div(temp, bcm->aux_data.unit); > + bcm->vote_x[bucket] = temp; > + > + temp = agg_peak[bucket] * 1000ULL; > + do_div(temp, bcm->aux_data.unit); > + bcm->vote_y[bucket] = temp; > + } > + > + if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 && > + bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) { > + bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1; > + bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1; > + bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1; > + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1; > + } > +} > + > +static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y, > + u32 addr, bool commit) > +{ > + bool valid = true; > + > + if (!cmd) > + return; > + > + if (vote_x == 0 && vote_y == 0) > + valid = false; > + > + if (vote_x > BCM_TCS_CMD_VOTE_MASK) > + vote_x = BCM_TCS_CMD_VOTE_MASK; > + > + if (vote_y > BCM_TCS_CMD_VOTE_MASK) > + vote_y = BCM_TCS_CMD_VOTE_MASK; > + > + cmd->addr = addr; > + cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y); > + > + /* > + * Set the wait for completion flag on command that need to be completed > + * before the next command. > + */ > + if (commit) > + cmd->wait = true; > +} > + > +static void tcs_list_gen(struct list_head *bcm_list, int bucket, > + struct tcs_cmd tcs_list[MAX_VCD], > + int n[MAX_VCD]) "n" should really be MAX_VCD + 1 to guarantee that it's zero-terminated, otherwise rpmh_write_batch() could go nuts. > +{ > + struct qcom_icc_bcm *bcm; > + bool commit; > + size_t idx = 0, batch = 0, cur_vcd_size = 0; > + > + memset(n, 0, sizeof(int) * MAX_VCD); > + > + list_for_each_entry(bcm, bcm_list, list) { > + commit = false; > + cur_vcd_size++; > + if ((list_is_last(&bcm->list, bcm_list)) || > + bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) { > + commit = true; > + cur_vcd_size = 0; > + } > + tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket], > + bcm->vote_y[bucket], bcm->addr, commit); > + idx++; > + n[batch]++; > + /* > + * Batch the BCMs in such a way that we do not split them in > + * multiple payloads when they are under the same VCD. This is > + * to ensure that every BCM is committed since we only set the > + * commit bit on the last BCM request of every VCD. > + */ > + if (n[batch] >= MAX_RPMH_PAYLOAD) { > + if (!commit) { > + n[batch] = cur_vcd_size; You lost what used to be a -= here to just an = during the copy from sdm845.c. How did that happen? > + n[batch + 1] = cur_vcd_size; > + } > + batch++; > + } > + } > +} > + > +/** > + * of_bcm_voter_get - gets a bcm voter handle from DT node > + * @dev: device pointer for the consumer device > + * @name: name for the bcm voter device > + * > + * This function will match a device_node pointer for the phandle > + * specified in the device DT and return a bcm_voter handle on success. > + * > + * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is returned > + * when matching bcm voter is yet to be found. > + */ > +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name) > +{ > + struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER); > + struct bcm_voter *temp; > + struct device_node *np, *node; > + int idx = 0; > + > + if (!dev || !dev->of_node) > + return ERR_PTR(-ENODEV); > + > + np = dev->of_node; > + > + if (name) { > + idx = of_property_match_string(np, "qcom,bcm-voter-names", name); > + if (idx < 0) > + return ERR_PTR(idx); > + } > + > + node = of_parse_phandle(np, "qcom,bcm-voters", idx); > + > + list_for_each_entry(temp, &bcm_voters, voter_node) { > + if (temp->np == node) { > + voter = temp; > + break; > + } > + } > + > + return voter; > +} > +EXPORT_SYMBOL_GPL(of_bcm_voter_get); > + > +/** > + * qcom_icc_bcm_voter_add - queues up the bcm nodes that require updates > + * @voter: voter that the bcms are being added to > + * @bcm: bcm to add to the commit and wake sleep list > + */ > +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm) > +{ > + if (!voter) > + return; > + > + mutex_lock(&voter->lock); > + if (list_empty(&bcm->list)) > + list_add_tail(&bcm->list, &voter->commit_list); > + > + if (list_empty(&bcm->ws_list)) > + list_add_tail(&bcm->ws_list, &voter->ws_list); > + > + mutex_unlock(&voter->lock); > +} > +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add); > + > +/** > + * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based on bcms > + * @voter: voter that needs flushing > + * > + * This function generates a set of AMC commands and flushes to the BCM device > + * associated with the voter. It conditionally generate WAKE and SLEEP commands > + * based on deltas between WAKE/SLEEP requirements. The ws_list persists > + * through multiple commit requests and bcm nodes are removed only when the > + * requirements for WAKE matches SLEEP. > + * > + * Returns 0 on success, or an appropriate error code otherwise. > + */ > +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter) > +{ > + struct qcom_icc_bcm *bcm; > + struct qcom_icc_bcm *bcm_tmp; > + int commit_idx[MAX_VCD]; > + struct tcs_cmd cmds[MAX_BCMS]; > + int ret = 0; > + > + if (!voter) > + return 0; > + > + mutex_lock(&voter->lock); > + list_for_each_entry(bcm, &voter->commit_list, list) > + bcm_aggregate(bcm); > + > + /* > + * Pre sort the BCMs based on VCD for ease of generating a command list > + * that groups the BCMs with the same VCD together. VCDs are numbered > + * with lowest being the most expensive time wise, ensuring that > + * those commands are being sent the earliest in the queue. This needs > + * to be sorted every commit since we can't guarantee the order in which > + * the BCMs are added to the list. > + */ > + list_sort(NULL, &voter->commit_list, cmp_vcd); > + > + /* > + * Construct the command list based on a pre ordered list of BCMs > + * based on VCD. > + */ > + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx); > + > + if (!commit_idx[0]) > + goto out; > + > + ret = rpmh_invalidate(voter->dev); > + if (ret) { > + pr_err("Error invalidating RPMH client (%d)\n", ret); > + goto out; > + } > + > + ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE, > + cmds, commit_idx); > + if (ret) { > + pr_err("Error sending AMC RPMH requests (%d)\n", ret); > + goto out; > + } > + > + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list) > + list_del_init(&bcm->list); > + > + INIT_LIST_HEAD(&voter->commit_list); This isn't necessary, you just carefully cherry-picked everything off the list in the previous line. > + > + list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, ws_list) { > + /* > + * Only generate WAKE and SLEEP commands if a resource's > + * requirements change as the execution environment transitions > + * between different power states. > + */ > + if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] != > + bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] || > + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] != > + bcm->vote_y[QCOM_ICC_BUCKET_SLEEP]) > + list_add_tail(&bcm->list, &voter->commit_list); > + else > + list_del_init(&bcm->ws_list); > + } > + > + if (list_empty(&voter->commit_list)) > + goto out; > + > + list_sort(NULL, &voter->commit_list, cmp_vcd); > + > + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx); > + > + ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx); > + if (ret) { > + pr_err("Error sending WAKE RPMH requests (%d)\n", ret); > + goto out; > + } > + > + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx); > + > + ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, commit_idx); > + if (ret) { > + pr_err("Error sending SLEEP RPMH requests (%d)\n", ret); > + goto out; > + } > + > +out: > + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list) > + list_del_init(&bcm->list); > + > + INIT_LIST_HEAD(&voter->commit_list); You can also remove this. > + mutex_unlock(&voter->lock); > + return ret; > +} > +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit); > + > +static int qcom_icc_bcm_voter_probe(struct platform_device *pdev) > +{ > + struct bcm_voter *voter; > + > + voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL); > + if (!voter) > + return -ENOMEM; > + > + voter->dev = &pdev->dev; > + voter->np = pdev->dev.of_node; > + mutex_init(&voter->lock); > + INIT_LIST_HEAD(&voter->commit_list); > + INIT_LIST_HEAD(&voter->ws_list); > + list_add_tail(&voter->voter_node, &bcm_voters); > + > + return 0; > +} > + > +static const struct of_device_id bcm_voter_of_match[] = { > + { .compatible = "qcom,sdm845-bcm-voter" }, > + { }, > +}; > + > +static struct platform_driver qcom_icc_bcm_voter_driver = { > + .probe = qcom_icc_bcm_voter_probe, > + .driver = { > + .name = "sdm845_bcm_voter", > + .of_match_table = bcm_voter_of_match, > + }, > +}; > +module_platform_driver(qcom_icc_bcm_voter_driver); > +MODULE_AUTHOR("David Dai <daidavid1@codeaurora.org>"); > +MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver"); > +MODULE_LICENSE("GPL v2"); > + > diff --git a/drivers/interconnect/qcom/bcm-voter.h b/drivers/interconnect/qcom/bcm-voter.h > new file mode 100644 > index 0000000..808b068 > --- /dev/null > +++ b/drivers/interconnect/qcom/bcm-voter.h > @@ -0,0 +1,28 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * > + */ > + > +#ifndef __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ > +#define __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ > + > +#include <soc/qcom/cmd-db.h> > +#include <soc/qcom/rpmh.h> > +#include <soc/qcom/tcs.h> > + > +#include "icc-rpmh.h" > + > +#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...) \ > + static struct qcom_icc_bcm _name = { \ > + .name = _bcmname, \ > + .keepalive = _keepalive, \ > + .num_nodes = _numnodes, \ > + .nodes = { __VA_ARGS__ }, \ > + } > + > +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name); > +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm); > +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter); > + > +#endif > diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c > new file mode 100644 > index 0000000..09ad9fe > --- /dev/null > +++ b/drivers/interconnect/qcom/icc-rpmh.c > @@ -0,0 +1,158 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * > + */ > + > +#include <asm/div64.h> > +#include <dt-bindings/interconnect/qcom,sdm845.h> > +#include <linux/interconnect.h> > +#include <linux/interconnect-provider.h> > +#include <linux/module.h> > + > +#include "bcm-voter.h" > +#include "icc-rpmh.h" > + > +/** > + * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set > + * @node: icc node to operate on > + */ > +void qcom_icc_pre_aggregate(struct icc_node *node) > +{ > + size_t i; > + struct qcom_icc_node *qn; > + > + qn = node->data; > + > + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { > + qn->sum_avg[i] = 0; > + qn->max_peak[i] = 0; > + } > +} > +EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); > + > +/** > + * qcom_icc_aggregate - aggregate bw for buckets indicated by tag > + * @node: node to aggregate > + * @tag: tag to indicate which buckets to aggregate > + * @avg_bw: new bw to sum aggregate > + * @peak_bw: new bw to max aggregate > + * @agg_avg: existing aggregate avg bw val > + * @agg_peak: existing aggregate peak bw val > + */ > +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, > + u32 peak_bw, u32 *agg_avg, u32 *agg_peak) > +{ > + size_t i; > + struct qcom_icc_node *qn; > + struct qcom_icc_provider *qp; > + > + qn = node->data; > + qp = to_qcom_provider(node->provider); > + > + if (!tag) > + tag = QCOM_ICC_TAG_ALWAYS; > + > + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { > + if (tag & BIT(i)) { > + qn->sum_avg[i] += avg_bw; > + qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw); > + } > + } > + > + *agg_avg += avg_bw; > + *agg_peak = max_t(u32, *agg_peak, peak_bw); > + > + for (i = 0; i < qn->num_bcms; i++) > + qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(qcom_icc_aggregate); > + > +/** > + * qcom_icc_set - set the constraints based on path > + * @src: source node for the path to set constraints on > + * @dst: destination node for the path to set constraints on > + * > + * Return: 0 on success, or an error code otherwise > + */ > +int qcom_icc_set(struct icc_node *src, struct icc_node *dst) > +{ > + struct qcom_icc_provider *qp; > + struct icc_node *node; > + int ret = 0; > + > + if (!src) > + node = dst; > + else > + node = src; > + > + qp = to_qcom_provider(node->provider); > + > + qcom_icc_bcm_voter_commit(qp->voter); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(qcom_icc_set); > + > +/** > + * qcom_icc_bcm_init - populates bcm aux data and connect qnodes > + * @bcm: bcm to be initialized > + * @dev: associated provider device > + * > + * Return: 0 on success, or an error code otherwise > + */ > +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev) > +{ > + struct qcom_icc_node *qn; > + const struct bcm_db *data; > + size_t data_count; > + int i; > + > + bcm->addr = cmd_db_read_addr(bcm->name); > + if (!bcm->addr) { > + dev_err(dev, "%s could not find RPMh address\n", > + bcm->name); > + return -EINVAL; > + } > + > + data = cmd_db_read_aux_data(bcm->name, &data_count); > + if (IS_ERR(data)) { > + dev_err(dev, "%s command db read error (%ld)\n", > + bcm->name, PTR_ERR(data)); > + return PTR_ERR(data); > + } > + if (!data_count) { > + dev_err(dev, "%s command db missing or partial aux data\n", > + bcm->name); > + return -EINVAL; > + } > + > + bcm->aux_data.unit = le32_to_cpu(data->unit); > + bcm->aux_data.width = le16_to_cpu(data->width); > + bcm->aux_data.vcd = data->vcd; > + bcm->aux_data.reserved = data->reserved; > + INIT_LIST_HEAD(&bcm->list); > + INIT_LIST_HEAD(&bcm->ws_list); > + > + /* > + * Link Qnodes to their respective BCMs > + */ > + for (i = 0; i < bcm->num_nodes; i++) { > + qn = bcm->nodes[i]; > + qn->bcms[qn->num_bcms] = bcm; > + qn->num_bcms++; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(qcom_icc_bcm_init); > + > +static struct platform_driver qcom_icc_rpmh_driver = { > + .driver = { > + .name = "icc_rpmh", > + }, > +}; > +module_platform_driver(qcom_icc_rpmh_driver); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h > new file mode 100644 > index 0000000..0ff8f8d > --- /dev/null > +++ b/drivers/interconnect/qcom/icc-rpmh.h > @@ -0,0 +1,151 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * > + */ > + > +#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ > +#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ > + > +#define to_qcom_provider(_provider) \ > + container_of(_provider, struct qcom_icc_provider, provider) > + > +/** > + * struct qcom_icc_provider - Qualcomm specific interconnect provider > + * @provider: generic interconnect provider > + * @dev: reference to the NoC device > + * @bcms: list of bcms that maps to the provider > + * @num_bcms: number of @bcms > + * @voter: bcm voter targeted by this provider > + */ > +struct qcom_icc_provider { > + struct icc_provider provider; > + struct device *dev; > + struct qcom_icc_bcm **bcms; > + size_t num_bcms; > + struct bcm_voter *voter; > +}; > + > +/** > + * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM) > + * @unit: divisor used to convert bytes/sec bw value to an RPMh msg > + * @width: multiplier used to convert bytes/sec bw value to an RPMh msg > + * @vcd: virtual clock domain that this bcm belongs to > + * @reserved: reserved field > + */ > +struct bcm_db { > + __le32 unit; > + __le16 width; > + u8 vcd; > + u8 reserved; > +}; > + > +#define MAX_LINKS 128 > +#define MAX_BCMS 64 > +#define MAX_BCM_PER_NODE 3 > +#define MAX_VCD 10 > + > +/* > + * The AMC bucket denotes constraints that are applied to hardware when > + * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied > + * when the execution environment transitions between active and low power mode. > + */ > +#define QCOM_ICC_BUCKET_AMC 0 > +#define QCOM_ICC_BUCKET_WAKE 1 > +#define QCOM_ICC_BUCKET_SLEEP 2 > +#define QCOM_ICC_NUM_BUCKETS 3 > +#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC) > +#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE) > +#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP) > +#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE) > +#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\ > + QCOM_ICC_TAG_SLEEP) > + > +/** > + * struct qcom_icc_node - Qualcomm specific interconnect nodes > + * @name: the node name used in debugfs > + * @links: an array of nodes where we can go next while traversing > + * @id: a unique node identifier > + * @num_links: the total number of @links > + * @channels: num of channels at this node > + * @buswidth: width of the interconnect between a node and the bus > + * @sum_avg: current sum aggregate value of all avg bw requests > + * @max_peak: current max aggregate value of all peak bw requests > + * @bcms: list of bcms associated with this logical node > + * @num_bcms: num of @bcms > + */ > +struct qcom_icc_node { > + const char *name; > + u16 links[MAX_LINKS]; > + u16 id; > + u16 num_links; > + u16 channels; > + u16 buswidth; > + u64 sum_avg[QCOM_ICC_NUM_BUCKETS]; > + u64 max_peak[QCOM_ICC_NUM_BUCKETS]; > + struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE]; > + size_t num_bcms; > +}; > + > +/** > + * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes > + * known as Bus Clock Manager (BCM) > + * @name: the bcm node name used to fetch BCM data from command db > + * @type: latency or bandwidth bcm > + * @addr: address offsets used when voting to RPMH > + * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm > + * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm > + * @dirty: flag used to indicate whether the bcm needs to be committed > + * @keepalive: flag used to indicate whether a keepalive is required > + * @aux_data: auxiliary data used when calculating threshold values and > + * communicating with RPMh > + * @list: used to link to other bcms when compiling lists for commit > + * @ws_list: used to keep track of bcms that may transition between wake/sleep > + * @num_nodes: total number of @num_nodes > + * @nodes: list of qcom_icc_nodes that this BCM encapsulates > + */ > +struct qcom_icc_bcm { > + const char *name; > + u32 type; > + u32 addr; > + u64 vote_x[QCOM_ICC_NUM_BUCKETS]; > + u64 vote_y[QCOM_ICC_NUM_BUCKETS]; > + bool dirty; > + bool keepalive; > + struct bcm_db aux_data; > + struct list_head list; > + struct list_head ws_list; > + size_t num_nodes; > + struct qcom_icc_node *nodes[]; > +}; > + > +struct qcom_icc_fabric { > + struct qcom_icc_node **nodes; > + size_t num_nodes; > +}; > + > +struct qcom_icc_desc { > + struct qcom_icc_node **nodes; > + size_t num_nodes; > + struct qcom_icc_bcm **bcms; > + size_t num_bcms; > +}; > + > +#define DEFINE_QNODE(_name, _id, _channels, _buswidth, \ > + _numlinks, ...) \ > + static struct qcom_icc_node _name = { \ > + .id = _id, \ > + .name = #_name, \ > + .channels = _channels, \ > + .buswidth = _buswidth, \ > + .num_links = _numlinks, \ > + .links = { __VA_ARGS__ }, \ > + } > + > +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, > + u32 peak_bw, u32 *agg_avg, u32 *agg_peak); > +int qcom_icc_set(struct icc_node *src, struct icc_node *dst); > +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev); > +void qcom_icc_pre_aggregate(struct icc_node *node); > + > +#endif > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project
Hey Evan, I am taking a stab at re-spinning the series. Apart the issues you've identified I added a few more to the list. On 2020-02-04 23:52, Evan Green wrote: > On Thu, Jan 9, 2020 at 8:33 PM David Dai <daidavid1@codeaurora.org> > wrote: >> >> Add bcm voter driver and add support for RPMh specific interconnect >> providers >> which implements the set and aggregate functionalities that translates >> bandwidth requests into RPMh messages. These modules provide a common >> set of >> functionalities for all Qualcomm RPMh based interconnect providers and >> should help reduce code duplication when adding new providers. >> >> Signed-off-by: David Dai <daidavid1@codeaurora.org> > > This was a little tough to wrap my head around, but then I understood > that most of it was a copy of functions from sdm845.c, which are later > deleted in patch 5 when sdm845.c uses the bcm-voter driver. > >> --- >> drivers/interconnect/qcom/Kconfig | 8 + >> drivers/interconnect/qcom/Makefile | 4 + >> drivers/interconnect/qcom/bcm-voter.c | 363 >> ++++++++++++++++++++++++++++++++++ >> drivers/interconnect/qcom/bcm-voter.h | 28 +++ >> drivers/interconnect/qcom/icc-rpmh.c | 158 +++++++++++++++ >> drivers/interconnect/qcom/icc-rpmh.h | 151 ++++++++++++++ >> 6 files changed, 712 insertions(+) >> create mode 100644 drivers/interconnect/qcom/bcm-voter.c >> create mode 100644 drivers/interconnect/qcom/bcm-voter.h >> create mode 100644 drivers/interconnect/qcom/icc-rpmh.c >> create mode 100644 drivers/interconnect/qcom/icc-rpmh.h >> >> diff --git a/drivers/interconnect/qcom/Kconfig >> b/drivers/interconnect/qcom/Kconfig >> index 2f9304d..cd100a4 100644 >> --- a/drivers/interconnect/qcom/Kconfig >> +++ b/drivers/interconnect/qcom/Kconfig >> @@ -5,6 +5,9 @@ config INTERCONNECT_QCOM >> help >> Support for Qualcomm's Network-on-Chip interconnect >> hardware. >> >> +config INTERCONNECT_QCOM_BCM_VOTER >> + tristate Looks like the dependencies are not captured. >> + >> config INTERCONNECT_QCOM_MSM8974 >> tristate "Qualcomm MSM8974 interconnect driver" >> depends on INTERCONNECT_QCOM >> @@ -23,10 +26,15 @@ config INTERCONNECT_QCOM_QCS404 >> This is a driver for the Qualcomm Network-on-Chip on >> qcs404-based >> platforms. >> >> +config INTERCONNECT_QCOM_RPMH >> + tristate Looks like the dependencies are not captured. >> + >> config INTERCONNECT_QCOM_SDM845 >> tristate "Qualcomm SDM845 interconnect driver" >> depends on INTERCONNECT_QCOM >> depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || >> COMPILE_TEST >> + select INTERCONNECT_QCOM_RPMH >> + select INTERCONNECT_QCOM_BCM_VOTER >> help >> This is a driver for the Qualcomm Network-on-Chip on >> sdm845-based >> platforms. >> diff --git a/drivers/interconnect/qcom/Makefile >> b/drivers/interconnect/qcom/Makefile >> index 9adf9e3..9317fa7 100644 >> --- a/drivers/interconnect/qcom/Makefile >> +++ b/drivers/interconnect/qcom/Makefile >> @@ -4,8 +4,12 @@ qnoc-msm8974-objs := msm8974.o >> qnoc-qcs404-objs := qcs404.o >> qnoc-sdm845-objs := sdm845.o >> icc-smd-rpm-objs := smd-rpm.o >> +icc-bcm-voter-objs := bcm-voter.o >> +icc-rpmh-obj := icc-rpmh.o nit: could be re-ordered >> >> +obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o >> obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o >> obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o >> +obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o >> obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o >> obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o >> diff --git a/drivers/interconnect/qcom/bcm-voter.c >> b/drivers/interconnect/qcom/bcm-voter.c >> new file mode 100644 >> index 0000000..a65680e >> --- /dev/null >> +++ b/drivers/interconnect/qcom/bcm-voter.c >> @@ -0,0 +1,363 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + * >> + */ >> +#include <linux/interconnect-provider.h> >> +#include <linux/list_sort.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_platform.h> >> +#include <linux/platform_device.h> >> + >> +#include <soc/qcom/rpmh.h> >> +#include <soc/qcom/tcs.h> >> + >> +#include "bcm-voter.h" >> +#include "icc-rpmh.h" >> + >> +static LIST_HEAD(bcm_voters); > > Doesn't this need a lock? yes this does need a lock. > >> + >> +/** >> + * struct bcm_voter - Bus Clock Manager voter >> + * @dev: reference to the device that communicates with the BCM >> + * @np: reference to the device node to match bcm voters >> + * @lock: mutex to protect commit and wake/sleep lists in the voter >> + * @commit_list: list containing bcms to be committed to hardware >> + * @ws_list: list containing bcms that have different wake/sleep >> votes >> + * @voter_node: list of bcm voters >> + */ >> +struct bcm_voter { >> + struct device *dev; >> + struct device_node *np; >> + struct mutex lock; >> + struct list_head commit_list; >> + struct list_head ws_list; >> + struct list_head voter_node; >> +}; >> + >> +static int cmp_vcd(void *priv, struct list_head *a, struct list_head >> *b) >> +{ >> + const struct qcom_icc_bcm *bcm_a = >> + list_entry(a, struct qcom_icc_bcm, list); >> + const struct qcom_icc_bcm *bcm_b = >> + list_entry(b, struct qcom_icc_bcm, list); >> + >> + if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd) >> + return -1; >> + else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd) >> + return 0; >> + else >> + return 1; >> +} >> + >> +static void bcm_aggregate(struct qcom_icc_bcm *bcm) >> +{ >> + size_t i, bucket; >> + u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0}; >> + u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0}; >> + u64 temp; >> + >> + for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) { >> + for (i = 0; i < bcm->num_nodes; i++) { >> + temp = bcm->nodes[i]->sum_avg[bucket] * >> bcm->aux_data.width; >> + do_div(temp, bcm->nodes[i]->buswidth * >> bcm->nodes[i]->channels); >> + agg_avg[bucket] = max(agg_avg[bucket], temp); >> + >> + temp = bcm->nodes[i]->max_peak[bucket] * >> bcm->aux_data.width; >> + do_div(temp, bcm->nodes[i]->buswidth); >> + agg_peak[bucket] = max(agg_peak[bucket], >> temp); >> + } >> + >> + temp = agg_avg[bucket] * 1000ULL; >> + do_div(temp, bcm->aux_data.unit); >> + bcm->vote_x[bucket] = temp; >> + >> + temp = agg_peak[bucket] * 1000ULL; >> + do_div(temp, bcm->aux_data.unit); >> + bcm->vote_y[bucket] = temp; >> + } >> + >> + if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 && >> + bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) { >> + bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1; >> + bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1; >> + bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1; >> + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1; >> + } >> +} >> + >> +static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 >> vote_y, >> + u32 addr, bool commit) >> +{ >> + bool valid = true; >> + >> + if (!cmd) >> + return; >> + >> + if (vote_x == 0 && vote_y == 0) >> + valid = false; >> + >> + if (vote_x > BCM_TCS_CMD_VOTE_MASK) >> + vote_x = BCM_TCS_CMD_VOTE_MASK; >> + >> + if (vote_y > BCM_TCS_CMD_VOTE_MASK) >> + vote_y = BCM_TCS_CMD_VOTE_MASK; >> + >> + cmd->addr = addr; >> + cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y); >> + >> + /* >> + * Set the wait for completion flag on command that need to be >> completed >> + * before the next command. >> + */ >> + if (commit) >> + cmd->wait = true; >> +} >> + >> +static void tcs_list_gen(struct list_head *bcm_list, int bucket, >> + struct tcs_cmd tcs_list[MAX_VCD], tcs_list should be an array of size MAX_BCMS. >> + int n[MAX_VCD]) > > "n" should really be MAX_VCD + 1 to guarantee that it's > zero-terminated, otherwise rpmh_write_batch() could go nuts. though the combination MAX_VCD, MAX_BCMs and vcd info read back from cmd_db for the bcms ensure that situation does not occur, it does make sense to have it MAX_VCD + 1. > >> +{ >> + struct qcom_icc_bcm *bcm; >> + bool commit; >> + size_t idx = 0, batch = 0, cur_vcd_size = 0; >> + >> + memset(n, 0, sizeof(int) * MAX_VCD); >> + >> + list_for_each_entry(bcm, bcm_list, list) { >> + commit = false; >> + cur_vcd_size++; >> + if ((list_is_last(&bcm->list, bcm_list)) || >> + bcm->aux_data.vcd != list_next_entry(bcm, >> list)->aux_data.vcd) { >> + commit = true; >> + cur_vcd_size = 0; >> + } >> + tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket], >> + bcm->vote_y[bucket], bcm->addr, commit); >> + idx++; >> + n[batch]++; >> + /* >> + * Batch the BCMs in such a way that we do not split >> them in >> + * multiple payloads when they are under the same VCD. >> This is >> + * to ensure that every BCM is committed since we only >> set the >> + * commit bit on the last BCM request of every VCD. >> + */ >> + if (n[batch] >= MAX_RPMH_PAYLOAD) { >> + if (!commit) { >> + n[batch] = cur_vcd_size; > > You lost what used to be a -= here to just an = during the copy from > sdm845.c. How did that happen? > >> + n[batch + 1] = cur_vcd_size; >> + } >> + batch++; >> + } >> + } >> +} >> + >> +/** >> + * of_bcm_voter_get - gets a bcm voter handle from DT node >> + * @dev: device pointer for the consumer device >> + * @name: name for the bcm voter device >> + * >> + * This function will match a device_node pointer for the phandle >> + * specified in the device DT and return a bcm_voter handle on >> success. >> + * >> + * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is >> returned >> + * when matching bcm voter is yet to be found. >> + */ >> +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char >> *name) >> +{ >> + struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER); >> + struct bcm_voter *temp; >> + struct device_node *np, *node; >> + int idx = 0; >> + >> + if (!dev || !dev->of_node) >> + return ERR_PTR(-ENODEV); >> + >> + np = dev->of_node; >> + >> + if (name) { >> + idx = of_property_match_string(np, >> "qcom,bcm-voter-names", name); >> + if (idx < 0) >> + return ERR_PTR(idx); >> + } >> + >> + node = of_parse_phandle(np, "qcom,bcm-voters", idx); >> + >> + list_for_each_entry(temp, &bcm_voters, voter_node) { >> + if (temp->np == node) { >> + voter = temp; >> + break; >> + } >> + } >> + >> + return voter; >> +} >> +EXPORT_SYMBOL_GPL(of_bcm_voter_get); >> + >> +/** >> + * qcom_icc_bcm_voter_add - queues up the bcm nodes that require >> updates >> + * @voter: voter that the bcms are being added to >> + * @bcm: bcm to add to the commit and wake sleep list >> + */ >> +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct >> qcom_icc_bcm *bcm) >> +{ >> + if (!voter) >> + return; >> + >> + mutex_lock(&voter->lock); >> + if (list_empty(&bcm->list)) >> + list_add_tail(&bcm->list, &voter->commit_list); >> + >> + if (list_empty(&bcm->ws_list)) >> + list_add_tail(&bcm->ws_list, &voter->ws_list); >> + >> + mutex_unlock(&voter->lock); >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add); >> + >> +/** >> + * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based >> on bcms >> + * @voter: voter that needs flushing >> + * >> + * This function generates a set of AMC commands and flushes to the >> BCM device >> + * associated with the voter. It conditionally generate WAKE and >> SLEEP commands >> + * based on deltas between WAKE/SLEEP requirements. The ws_list >> persists >> + * through multiple commit requests and bcm nodes are removed only >> when the >> + * requirements for WAKE matches SLEEP. >> + * >> + * Returns 0 on success, or an appropriate error code otherwise. >> + */ >> +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter) >> +{ >> + struct qcom_icc_bcm *bcm; >> + struct qcom_icc_bcm *bcm_tmp; >> + int commit_idx[MAX_VCD]; >> + struct tcs_cmd cmds[MAX_BCMS]; >> + int ret = 0; >> + >> + if (!voter) >> + return 0; >> + >> + mutex_lock(&voter->lock); >> + list_for_each_entry(bcm, &voter->commit_list, list) >> + bcm_aggregate(bcm); >> + >> + /* >> + * Pre sort the BCMs based on VCD for ease of generating a >> command list >> + * that groups the BCMs with the same VCD together. VCDs are >> numbered >> + * with lowest being the most expensive time wise, ensuring >> that >> + * those commands are being sent the earliest in the queue. >> This needs >> + * to be sorted every commit since we can't guarantee the >> order in which >> + * the BCMs are added to the list. >> + */ >> + list_sort(NULL, &voter->commit_list, cmp_vcd); >> + >> + /* >> + * Construct the command list based on a pre ordered list of >> BCMs >> + * based on VCD. >> + */ >> + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, >> commit_idx); >> + >> + if (!commit_idx[0]) >> + goto out; >> + >> + ret = rpmh_invalidate(voter->dev); >> + if (ret) { >> + pr_err("Error invalidating RPMH client (%d)\n", ret); >> + goto out; >> + } >> + >> + ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE, >> + cmds, commit_idx); >> + if (ret) { >> + pr_err("Error sending AMC RPMH requests (%d)\n", ret); >> + goto out; >> + } >> + >> + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, >> list) >> + list_del_init(&bcm->list); >> + >> + INIT_LIST_HEAD(&voter->commit_list); > > This isn't necessary, you just carefully cherry-picked everything off > the list in the previous line. will drop it > >> + >> + list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, >> ws_list) { >> + /* >> + * Only generate WAKE and SLEEP commands if a >> resource's >> + * requirements change as the execution environment >> transitions >> + * between different power states. >> + */ >> + if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] != >> + bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] || >> + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] != >> + bcm->vote_y[QCOM_ICC_BUCKET_SLEEP]) >> + list_add_tail(&bcm->list, >> &voter->commit_list); >> + else >> + list_del_init(&bcm->ws_list); >> + } >> + >> + if (list_empty(&voter->commit_list)) >> + goto out; >> + >> + list_sort(NULL, &voter->commit_list, cmp_vcd); >> + >> + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, >> commit_idx); >> + >> + ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, >> commit_idx); >> + if (ret) { >> + pr_err("Error sending WAKE RPMH requests (%d)\n", >> ret); >> + goto out; >> + } >> + >> + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, >> commit_idx); >> + >> + ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, >> commit_idx); >> + if (ret) { >> + pr_err("Error sending SLEEP RPMH requests (%d)\n", >> ret); >> + goto out; >> + } >> + >> +out: >> + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, >> list) >> + list_del_init(&bcm->list); >> + >> + INIT_LIST_HEAD(&voter->commit_list); > > You can also remove this. will drop it > > >> + mutex_unlock(&voter->lock); >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit); >> + >> +static int qcom_icc_bcm_voter_probe(struct platform_device *pdev) >> +{ >> + struct bcm_voter *voter; >> + >> + voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL); >> + if (!voter) >> + return -ENOMEM; >> + >> + voter->dev = &pdev->dev; >> + voter->np = pdev->dev.of_node; >> + mutex_init(&voter->lock); >> + INIT_LIST_HEAD(&voter->commit_list); >> + INIT_LIST_HEAD(&voter->ws_list); >> + list_add_tail(&voter->voter_node, &bcm_voters); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id bcm_voter_of_match[] = { >> + { .compatible = "qcom,sdm845-bcm-voter" }, >> + { }, >> +}; >> + >> +static struct platform_driver qcom_icc_bcm_voter_driver = { >> + .probe = qcom_icc_bcm_voter_probe, >> + .driver = { >> + .name = "sdm845_bcm_voter", >> + .of_match_table = bcm_voter_of_match, >> + }, >> +}; >> +module_platform_driver(qcom_icc_bcm_voter_driver); >> +MODULE_AUTHOR("David Dai <daidavid1@codeaurora.org>"); >> +MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver"); >> +MODULE_LICENSE("GPL v2"); >> + >> diff --git a/drivers/interconnect/qcom/bcm-voter.h >> b/drivers/interconnect/qcom/bcm-voter.h >> new file mode 100644 >> index 0000000..808b068 >> --- /dev/null >> +++ b/drivers/interconnect/qcom/bcm-voter.h >> @@ -0,0 +1,28 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + * >> + */ >> + >> +#ifndef __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ >> +#define __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ >> + >> +#include <soc/qcom/cmd-db.h> >> +#include <soc/qcom/rpmh.h> >> +#include <soc/qcom/tcs.h> >> + >> +#include "icc-rpmh.h" >> + >> +#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...) >> \ >> + static struct qcom_icc_bcm _name = { >> \ >> + .name = _bcmname, >> \ >> + .keepalive = _keepalive, >> \ >> + .num_nodes = _numnodes, >> \ should be able to calculate the num_nodes from VA_ARGS.. >> + .nodes = { __VA_ARGS__ }, >> \ >> + } >> + >> +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char >> *name); >> +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct >> qcom_icc_bcm *bcm); >> +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter); >> + >> +#endif >> diff --git a/drivers/interconnect/qcom/icc-rpmh.c >> b/drivers/interconnect/qcom/icc-rpmh.c >> new file mode 100644 >> index 0000000..09ad9fe >> --- /dev/null >> +++ b/drivers/interconnect/qcom/icc-rpmh.c >> @@ -0,0 +1,158 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + * >> + */ >> + >> +#include <asm/div64.h> looks like ^^ should be included in bcm_voter instead... >> +#include <dt-bindings/interconnect/qcom,sdm845.h> ^^ not needed >> +#include <linux/interconnect.h> >> +#include <linux/interconnect-provider.h> >> +#include <linux/module.h> dropping this as well for the reasons mentioned below. >> + >> +#include "bcm-voter.h" >> +#include "icc-rpmh.h" >> + >> +/** >> + * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set >> + * @node: icc node to operate on >> + */ >> +void qcom_icc_pre_aggregate(struct icc_node *node) >> +{ >> + size_t i; >> + struct qcom_icc_node *qn; >> + >> + qn = node->data; >> + >> + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { >> + qn->sum_avg[i] = 0; >> + qn->max_peak[i] = 0; >> + } >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); >> + >> +/** >> + * qcom_icc_aggregate - aggregate bw for buckets indicated by tag >> + * @node: node to aggregate >> + * @tag: tag to indicate which buckets to aggregate >> + * @avg_bw: new bw to sum aggregate >> + * @peak_bw: new bw to max aggregate >> + * @agg_avg: existing aggregate avg bw val >> + * @agg_peak: existing aggregate peak bw val >> + */ >> +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, >> + u32 peak_bw, u32 *agg_avg, u32 *agg_peak) >> +{ >> + size_t i; >> + struct qcom_icc_node *qn; >> + struct qcom_icc_provider *qp; >> + >> + qn = node->data; >> + qp = to_qcom_provider(node->provider); >> + >> + if (!tag) >> + tag = QCOM_ICC_TAG_ALWAYS; >> + >> + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { >> + if (tag & BIT(i)) { >> + qn->sum_avg[i] += avg_bw; >> + qn->max_peak[i] = max_t(u32, qn->max_peak[i], >> peak_bw); >> + } >> + } >> + >> + *agg_avg += avg_bw; >> + *agg_peak = max_t(u32, *agg_peak, peak_bw); >> + >> + for (i = 0; i < qn->num_bcms; i++) >> + qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_aggregate); >> + >> +/** >> + * qcom_icc_set - set the constraints based on path >> + * @src: source node for the path to set constraints on >> + * @dst: destination node for the path to set constraints on >> + * >> + * Return: 0 on success, or an error code otherwise >> + */ >> +int qcom_icc_set(struct icc_node *src, struct icc_node *dst) >> +{ >> + struct qcom_icc_provider *qp; >> + struct icc_node *node; >> + int ret = 0; >> + >> + if (!src) >> + node = dst; >> + else >> + node = src; >> + >> + qp = to_qcom_provider(node->provider); >> + >> + qcom_icc_bcm_voter_commit(qp->voter); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_set); >> + >> +/** >> + * qcom_icc_bcm_init - populates bcm aux data and connect qnodes >> + * @bcm: bcm to be initialized >> + * @dev: associated provider device >> + * >> + * Return: 0 on success, or an error code otherwise >> + */ >> +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev) >> +{ >> + struct qcom_icc_node *qn; >> + const struct bcm_db *data; >> + size_t data_count; >> + int i; I'll add a check to see if bcm is already initialsed. >> + >> + bcm->addr = cmd_db_read_addr(bcm->name); >> + if (!bcm->addr) { >> + dev_err(dev, "%s could not find RPMh address\n", >> + bcm->name); >> + return -EINVAL; >> + } >> + >> + data = cmd_db_read_aux_data(bcm->name, &data_count); >> + if (IS_ERR(data)) { >> + dev_err(dev, "%s command db read error (%ld)\n", >> + bcm->name, PTR_ERR(data)); >> + return PTR_ERR(data); >> + } >> + if (!data_count) { >> + dev_err(dev, "%s command db missing or partial aux >> data\n", >> + bcm->name); >> + return -EINVAL; >> + } >> + >> + bcm->aux_data.unit = le32_to_cpu(data->unit); >> + bcm->aux_data.width = le16_to_cpu(data->width); >> + bcm->aux_data.vcd = data->vcd; >> + bcm->aux_data.reserved = data->reserved; >> + INIT_LIST_HEAD(&bcm->list); >> + INIT_LIST_HEAD(&bcm->ws_list); >> + >> + /* >> + * Link Qnodes to their respective BCMs >> + */ >> + for (i = 0; i < bcm->num_nodes; i++) { >> + qn = bcm->nodes[i]; >> + qn->bcms[qn->num_bcms] = bcm; >> + qn->num_bcms++; >> + } >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(qcom_icc_bcm_init); >> + >> +static struct platform_driver qcom_icc_rpmh_driver = { >> + .driver = { >> + .name = "icc_rpmh", >> + }, >> +}; >> +module_platform_driver(qcom_icc_rpmh_driver); I don't see any reason for ^^ to be a module platform driver, will remove it and list them as a set of helper functions. >> +MODULE_LICENSE("GPL v2"); >> diff --git a/drivers/interconnect/qcom/icc-rpmh.h >> b/drivers/interconnect/qcom/icc-rpmh.h >> new file mode 100644 >> index 0000000..0ff8f8d >> --- /dev/null >> +++ b/drivers/interconnect/qcom/icc-rpmh.h >> @@ -0,0 +1,151 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + * >> + */ >> + >> +#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ >> +#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ >> + >> +#define to_qcom_provider(_provider) \ >> + container_of(_provider, struct qcom_icc_provider, provider) >> + >> +/** >> + * struct qcom_icc_provider - Qualcomm specific interconnect provider >> + * @provider: generic interconnect provider >> + * @dev: reference to the NoC device >> + * @bcms: list of bcms that maps to the provider >> + * @num_bcms: number of @bcms >> + * @voter: bcm voter targeted by this provider >> + */ >> +struct qcom_icc_provider { >> + struct icc_provider provider; >> + struct device *dev; >> + struct qcom_icc_bcm **bcms; >> + size_t num_bcms; >> + struct bcm_voter *voter; >> +}; >> + >> +/** >> + * struct bcm_db - Auxiliary data pertaining to each Bus Clock >> Manager (BCM) >> + * @unit: divisor used to convert bytes/sec bw value to an RPMh msg >> + * @width: multiplier used to convert bytes/sec bw value to an RPMh >> msg >> + * @vcd: virtual clock domain that this bcm belongs to >> + * @reserved: reserved field >> + */ >> +struct bcm_db { >> + __le32 unit; >> + __le16 width; >> + u8 vcd; >> + u8 reserved; >> +}; >> + >> +#define MAX_LINKS 128 >> +#define MAX_BCMS 64 >> +#define MAX_BCM_PER_NODE 3 >> +#define MAX_VCD 10 >> + >> +/* >> + * The AMC bucket denotes constraints that are applied to hardware >> when >> + * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are >> applied >> + * when the execution environment transitions between active and low >> power mode. >> + */ >> +#define QCOM_ICC_BUCKET_AMC 0 >> +#define QCOM_ICC_BUCKET_WAKE 1 >> +#define QCOM_ICC_BUCKET_SLEEP 2 >> +#define QCOM_ICC_NUM_BUCKETS 3 >> +#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC) >> +#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE) >> +#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP) >> +#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | >> QCOM_ICC_TAG_WAKE) >> +#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | >> QCOM_ICC_TAG_WAKE |\ >> + QCOM_ICC_TAG_SLEEP) >> + >> +/** >> + * struct qcom_icc_node - Qualcomm specific interconnect nodes >> + * @name: the node name used in debugfs >> + * @links: an array of nodes where we can go next while traversing >> + * @id: a unique node identifier >> + * @num_links: the total number of @links >> + * @channels: num of channels at this node >> + * @buswidth: width of the interconnect between a node and the bus >> + * @sum_avg: current sum aggregate value of all avg bw requests >> + * @max_peak: current max aggregate value of all peak bw requests >> + * @bcms: list of bcms associated with this logical node >> + * @num_bcms: num of @bcms >> + */ >> +struct qcom_icc_node { >> + const char *name; >> + u16 links[MAX_LINKS]; >> + u16 id; >> + u16 num_links; >> + u16 channels; >> + u16 buswidth; >> + u64 sum_avg[QCOM_ICC_NUM_BUCKETS]; >> + u64 max_peak[QCOM_ICC_NUM_BUCKETS]; >> + struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE]; >> + size_t num_bcms; >> +}; >> + >> +/** >> + * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes >> + * known as Bus Clock Manager (BCM) >> + * @name: the bcm node name used to fetch BCM data from command db >> + * @type: latency or bandwidth bcm >> + * @addr: address offsets used when voting to RPMH >> + * @vote_x: aggregated threshold values, represents sum_bw when @type >> is bw bcm >> + * @vote_y: aggregated threshold values, represents peak_bw when >> @type is bw bcm >> + * @dirty: flag used to indicate whether the bcm needs to be >> committed >> + * @keepalive: flag used to indicate whether a keepalive is required >> + * @aux_data: auxiliary data used when calculating threshold values >> and >> + * communicating with RPMh >> + * @list: used to link to other bcms when compiling lists for commit >> + * @ws_list: used to keep track of bcms that may transition between >> wake/sleep >> + * @num_nodes: total number of @num_nodes >> + * @nodes: list of qcom_icc_nodes that this BCM encapsulates >> + */ >> +struct qcom_icc_bcm { >> + const char *name; >> + u32 type; >> + u32 addr; >> + u64 vote_x[QCOM_ICC_NUM_BUCKETS]; >> + u64 vote_y[QCOM_ICC_NUM_BUCKETS]; >> + bool dirty; >> + bool keepalive; >> + struct bcm_db aux_data; >> + struct list_head list; >> + struct list_head ws_list; >> + size_t num_nodes; >> + struct qcom_icc_node *nodes[]; >> +}; >> + >> +struct qcom_icc_fabric { >> + struct qcom_icc_node **nodes; >> + size_t num_nodes; >> +}; >> + >> +struct qcom_icc_desc { >> + struct qcom_icc_node **nodes; >> + size_t num_nodes; >> + struct qcom_icc_bcm **bcms; >> + size_t num_bcms; >> +}; >> + >> +#define DEFINE_QNODE(_name, _id, _channels, _buswidth, >> \ >> + _numlinks, ...) >> \ >> + static struct qcom_icc_node _name = { >> \ >> + .id = _id, >> \ >> + .name = #_name, >> \ >> + .channels = _channels, >> \ >> + .buswidth = _buswidth, >> \ >> + .num_links = _numlinks, >> \ should be able to calculate the num of links from VA_ARGS... >> + .links = { __VA_ARGS__ }, >> \ >> + } >> + >> +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, >> + u32 peak_bw, u32 *agg_avg, u32 *agg_peak); >> +int qcom_icc_set(struct icc_node *src, struct icc_node *dst); >> +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev); >> +void qcom_icc_pre_aggregate(struct icc_node *node); >> + >> +#endif >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project
On 2020-02-04 23:48, Evan Green wrote: > On Thu, Jan 9, 2020 at 8:33 PM David Dai <daidavid1@codeaurora.org> > wrote: >> >> Add the DT nodes for each of the Network-On-Chip interconnect >> buses found on SDM845 based platform and redefine the rsc_hlos >> child node as a bcm-voter device to better represent the hardware. >> >> Signed-off-by: David Dai <daidavid1@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sdm845.dtsi | 61 >> ++++++++++++++++++++++++++++++++++-- >> 1 file changed, 58 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> index ddb1f23..7c617a9 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> @@ -1364,6 +1364,55 @@ >> interrupts = <GIC_SPI 582 >> IRQ_TYPE_LEVEL_HIGH>; >> }; >> >> + mem_noc: interconnect@1380000 { >> + compatible = "qcom,sdm845-mem-noc"; >> + reg = <0 0x01380000 0 0x27200>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + dc_noc: interconnect@14e0000 { >> + compatible = "qcom,sdm845-dc-noc"; >> + reg = <0 0x014e0000 0 0x400>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + config_noc: interconnect@1500000 { >> + compatible = "qcom,sdm845-config-noc"; >> + reg = <0 0x01500000 0 0x5080>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + system_noc: interconnect@1620000 { >> + compatible = "qcom,sdm845-system-noc"; >> + reg = <0 0x01620000 0 0x18080>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + aggre1_noc: interconnect@16e0000 { >> + compatible = "qcom,sdm845-aggre1-noc"; >> + reg = <0 0x016e0000 0 0xd080>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + aggre2_noc: interconnect@1700000 { >> + compatible = "qcom,sdm845-aggre2-noc"; >> + reg = <0 0x01700000 0 0x3b100>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + mmss_noc: interconnect@1740000 { >> + compatible = "qcom,sdm845-mmss-noc"; >> + reg = <0 0x01740000 0 0x1c1000>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> ufs_mem_hc: ufshc@1d84000 { >> compatible = "qcom,sdm845-ufshc", >> "qcom,ufshc", >> "jedec,ufs-2.0"; >> @@ -3100,6 +3149,13 @@ >> #mbox-cells = <1>; >> }; >> >> + gladiator_noc: interconnect@17900000 { >> + compatible = "qcom,sdm845-gladiator-noc"; >> + reg = <0 0x17900000 0 0xd080>; >> + #interconnect-cells = <1>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> apps_rsc: rsc@179c0000 { >> label = "apps_rsc"; >> compatible = "qcom,rpmh-rsc"; >> @@ -3174,9 +3230,8 @@ >> }; >> }; >> >> - rsc_hlos: interconnect { >> - compatible = "qcom,sdm845-rsc-hlos"; >> - #interconnect-cells = <1>; > > With this reworking of the bindings the examples in these files are now > broken: > Documentation/devicetree/bindings/display/msm/gpu.txt > Documentation/devicetree/bindings/display/msm/dpu.txt > > It would be nice to fix them up in a subsequent change. looks like most of them qcom display bindings are in the process of getting converted to yaml, we'll have to make sure that it gets addressed then. > -Evan