Message ID | 1307489278-96804-3-git-send-email-andreas.devel@googlemail.com |
---|---|
State | Superseded |
Delegated to: | Reinhard Meyer |
Headers | show |
Am 08.06.2011 01:27, schrieb Andreas Bießmann: > > diff --git a/arch/arm/cpu/arm920t/at91/Makefile b/arch/arm/cpu/arm920t/at91/Makefile > index 5c71b77..872461a 100644 > --- a/arch/arm/cpu/arm920t/at91/Makefile > +++ b/arch/arm/cpu/arm920t/at91/Makefile > @@ -28,6 +28,7 @@ LIB = $(obj)lib$(SOC).o > SOBJS += lowlevel_init.o > COBJS += reset.o > COBJS += timer.o > +COBJS += cpu.o > > SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) > diff --git a/arch/arm/include/asm/arch-at91/at91rm9200.h b/arch/arm/include/asm/arch-at91/at91rm9200.h > index ff18014..979241e 100644 Dear Andreas Bießmann, I am running in the following error: ..... make -C arch/arm/cpu/arm920t/at91/ make[1]: Entering directory `/home/scharsig/projects/CPUx9K2/u-boot/arch/arm/cpu/arm920t/at91' make[1]: *** No rule to make target `cpu.c', needed by `.depend'. Stop. make[1]: Leaving directory `/home/scharsig/projects/CPUx9K2/u-boot/arch/arm/cpu/arm920t/at91' make: *** [arch/arm/cpu/arm920t/at91/libat91.o] Error 2 Is it possible that the patch is incomplete or is an additional patch needed Best regards Jens Scharsig
resent to right list ... Dear Reinhard Meyer, Am 09.06.2011 11:21, schrieb Reinhard Meyer: > Dear Andreas Bießmann, >> This patch enables the new clock features from new libat91-common. This >> is a required step to get at91rm9200_usart replaced by atmel_usart >> driver. >> >> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> >> >> Cc: Jens Scharsig <js_at_ng@scharsoft.de> >> Cc: Eric Bénard <eric@eukrea.com> > > I think this should go into NEXT unleass it unbreaks that board right now. > You mentioned in another mail that it would be ok to be in 2011.09. > Is that OK? I'm fine with that. The arm920t/at91 boards do build (with minor warnings in at91_emac and at91rm9200_usart) and work on real hardware since 9e8df9c4db7835152996c96cc432dc6dd70bb17c The warnings are: - 'at91_emac.c:487:2: warning: dereferencing type-punned pointer will break strict-aliasing rules' in at91_emac -> you know about that ... it is the same as in macb driver and will also be fixed soon. - 'at91rm9200_usart.c:39:2: warning: #warning Please update to use C structur SoC access !' -> at91rm9200_usart will be removed soon Therefore I do not see any reason to remove those arm920t/at91 boards. I will do some more testing with atmel_usart driver on atrm9200 devices and send for review this weekend. The big removal of old-style at91rm9200 boards can begin after that cause the deprecated at91rm9200_usart driver needs some outdated stuff which will also be removed in that step. Besides that, I found out cpu.c (in that commit) is missing a GPL header and copyright notice. So please do not add this version. regards Andreas Bießmann
diff --git a/arch/arm/cpu/arm920t/at91/Makefile b/arch/arm/cpu/arm920t/at91/Makefile index 5c71b77..872461a 100644 --- a/arch/arm/cpu/arm920t/at91/Makefile +++ b/arch/arm/cpu/arm920t/at91/Makefile @@ -28,6 +28,7 @@ LIB = $(obj)lib$(SOC).o SOBJS += lowlevel_init.o COBJS += reset.o COBJS += timer.o +COBJS += cpu.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/include/asm/arch-at91/at91rm9200.h b/arch/arm/include/asm/arch-at91/at91rm9200.h index ff18014..979241e 100644 --- a/arch/arm/include/asm/arch-at91/at91rm9200.h +++ b/arch/arm/include/asm/arch-at91/at91rm9200.h @@ -22,6 +22,7 @@ #define __AT91RM9200_H__ #define CONFIG_AT91FAMILY /* it's a member of AT91 */ +#define CONFIG_ARCH_CPU_INIT /* we need arch_cpu_init() for hw timers */ #define CONFIG_ARM920T /* This is an ARM920T Core */ /* Periperial Identifiers */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 16cd214..ee199ab 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -55,6 +55,7 @@ * CONFIG_SYS_HZ is the tick rate for timer tc0 */ #define AT91C_XTAL_CLOCK 18432000 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 ) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) @@ -66,6 +67,8 @@ #define CONFIG_CPUAT91 #define USE_920T_MMU +#include <asm/hardware.h> /* needed for port definitions */ + #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index cfaef15..2bda72b 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -37,6 +37,7 @@ #endif #define AT91C_XTAL_CLOCK 18432000 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) @@ -45,11 +46,11 @@ #define CONFIG_ARM920T #define CONFIG_AT91RM9200 #define CONFIG_CPUAT91 -#define CONFIG_AT91FAMILY - #undef CONFIG_USE_IRQ #define USE_920T_MMU +#include <asm/hardware.h> /* needed for port definitions */ + #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index e12770a..25b28f5 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -36,7 +36,7 @@ #define CONFIG_VERSION_VARIABLE #define CONFIG_IDENT_STRING " on EB+CPUx9K2" -#include <asm/arch/hardware.h> /* needed for port definitions */ +#include <asm/hardware.h> /* needed for port definitions */ #define CONFIG_MISC_INIT_R @@ -69,7 +69,7 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define AT91_SLOW_CLOCK 32768 /* slow clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ #define CONFIG_CMDLINE_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1
This patch enables the new clock features from new libat91-common. This is a required step to get at91rm9200_usart replaced by atmel_usart driver. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Jens Scharsig <js_at_ng@scharsoft.de> CC: Eric Bénard <eric@eukrea.com> --- arch/arm/cpu/arm920t/at91/Makefile | 1 + arch/arm/include/asm/arch-at91/at91rm9200.h | 1 + include/configs/at91rm9200ek.h | 3 +++ include/configs/cpuat91.h | 5 +++-- include/configs/eb_cpux9k2.h | 4 ++-- 5 files changed, 10 insertions(+), 4 deletions(-)