Message ID | 1576081356-18298-1-git-send-email-jiaxin.yu@mediatek.com |
---|---|
Headers | show |
Series | ASoC: mt8183: fix audio playback slowly after playback | expand |
Hi, On Thu, 2019-12-12 at 00:22 +0800, Jiaxin Yu wrote: > From: "yong.liang" <yong.liang@mediatek.com> > > Add reset controller API in watchdog driver. > Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, > camera, codec and connectivity) software reset functionality. Do any of the listed sub-systems use the reset_control_reset() functionality? Is there no delay requirement between assert and deassert? Otherwise it would be safer not to implement the .reset() operation at all. > > Signed-off-by: yong.liang <yong.liang@mediatek.com> > --- > drivers/watchdog/Kconfig | 1 + > drivers/watchdog/mtk_wdt.c | 109 ++++++++++++++++++++++++++++++++++++- > 2 files changed, 109 insertions(+), 1 deletion(-) > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 2e07caab9db2..629249fe5305 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG > tristate "Mediatek SoCs watchdog support" > depends on ARCH_MEDIATEK || COMPILE_TEST > select WATCHDOG_CORE > + select RESET_CONTROLLER > help > Say Y here to include support for the watchdog timer > in Mediatek SoCs. > diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c > index 9c3d0033260d..667380031dfd 100644 > --- a/drivers/watchdog/mtk_wdt.c > +++ b/drivers/watchdog/mtk_wdt.c > @@ -9,6 +9,9 @@ > * Based on sunxi_wdt.c > */ > > +#include <dt-bindings/reset-controller/mt2712-resets.h> > +#include <dt-bindings/reset-controller/mt8183-resets.h> > +#include <linux/delay.h> > #include <linux/err.h> > #include <linux/init.h> > #include <linux/io.h> > @@ -16,10 +19,12 @@ > #include <linux/module.h> > #include <linux/moduleparam.h> > #include <linux/of.h> > +#include <linux/of_device.h> > #include <linux/platform_device.h> > +#include <linux/reset-controller.h> > +#include <linux/slab.h> What is this required for? > #include <linux/types.h> > #include <linux/watchdog.h> > -#include <linux/delay.h> > > #define WDT_MAX_TIMEOUT 31 > #define WDT_MIN_TIMEOUT 1 > @@ -44,6 +49,9 @@ > #define WDT_SWRST 0x14 > #define WDT_SWRST_KEY 0x1209 > > +#define WDT_SWSYSRST 0x18U > +#define WDT_SWSYS_RST_KEY 0x88000000 > + > #define DRV_NAME "mtk-wdt" > #define DRV_VERSION "1.0" > > @@ -53,8 +61,97 @@ static unsigned int timeout; > struct mtk_wdt_dev { > struct watchdog_device wdt_dev; > void __iomem *wdt_base; > + spinlock_t lock; /* protects WDT_SWSYSRST reg */ > + struct reset_controller_dev rcdev; > +}; > + > +struct mtk_wdt_data { > + int infracfg_sw_rst_num; This is not used at all, better remove it. > + int toprgu_sw_rst_num; > +}; > + > +static const struct mtk_wdt_data mt2712_data = { > + .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, > +}; > + > +static const struct mtk_wdt_data mt8183_data = { > + .infracfg_sw_rst_num = MT8183_INFRACFG_SW_RST_NUM, Same as above. > + .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, > +}; > + > +static int toprgu_reset_update(struct reset_controller_dev *rcdev, > + unsigned long id, bool assert) > +{ > + unsigned int tmp; > + unsigned long flags; > + This empty line can be removed. > + struct mtk_wdt_dev *data = > + container_of(rcdev, struct mtk_wdt_dev, rcdev); > + > + spin_lock_irqsave(&data->lock, flags); > + > + tmp = readl(data->wdt_base + WDT_SWSYSRST); > + if (assert) > + tmp |= BIT(id); > + else > + tmp &= ~BIT(id); > + tmp |= WDT_SWSYS_RST_KEY; > + writel(tmp, data->wdt_base + WDT_SWSYSRST); > + > + spin_unlock_irqrestore(&data->lock, flags); > + > + return 0; > +} > + > +static int toprgu_reset_assert(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + return toprgu_reset_update(rcdev, id, true); > +} > + > +static int toprgu_reset_deassert(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + return toprgu_reset_update(rcdev, id, false); > +} > + > +static int toprgu_reset(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + int ret; > + > + ret = toprgu_reset_assert(rcdev, id); > + if (ret) > + return ret; > + > + return toprgu_reset_deassert(rcdev, id); > +} As mentioned above, is this needed? Does this work for all modules? Only implement this if you are sure both are true. regards Philipp
On Thu, 2019-12-12 at 00:44 +0800, Philipp Zabel wrote: > Hi, > > On Thu, 2019-12-12 at 00:22 +0800, Jiaxin Yu wrote: > > From: "yong.liang" <yong.liang@mediatek.com> > > > > Add reset controller API in watchdog driver. > > Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, > > camera, codec and connectivity) software reset functionality. > > Do any of the listed sub-systems use the reset_control_reset() > functionality? Is there no delay requirement between assert and > deassert? Otherwise it would be safer not to implement the .reset() > operation at all. > > > Audio use this reset API to reset audio, and it works well. It is no need to add delay between assert and deassert. > > Signed-off-by: yong.liang <yong.liang@mediatek.com> > > --- > > drivers/watchdog/Kconfig | 1 + > > drivers/watchdog/mtk_wdt.c | 109 ++++++++++++++++++++++++++++++++++++- > > 2 files changed, 109 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > > index 2e07caab9db2..629249fe5305 100644 > > --- a/drivers/watchdog/Kconfig > > +++ b/drivers/watchdog/Kconfig > > @@ -717,6 +717,7 @@ config MEDIATEK_WATCHDOG > > tristate "Mediatek SoCs watchdog support" > > depends on ARCH_MEDIATEK || COMPILE_TEST > > select WATCHDOG_CORE > > + select RESET_CONTROLLER > > help > > Say Y here to include support for the watchdog timer > > in Mediatek SoCs. > > diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c > > index 9c3d0033260d..667380031dfd 100644 > > --- a/drivers/watchdog/mtk_wdt.c > > +++ b/drivers/watchdog/mtk_wdt.c > > @@ -9,6 +9,9 @@ > > * Based on sunxi_wdt.c > > */ > > > > +#include <dt-bindings/reset-controller/mt2712-resets.h> > > +#include <dt-bindings/reset-controller/mt8183-resets.h> > > +#include <linux/delay.h> > > #include <linux/err.h> > > #include <linux/init.h> > > #include <linux/io.h> > > @@ -16,10 +19,12 @@ > > #include <linux/module.h> > > #include <linux/moduleparam.h> > > #include <linux/of.h> > > +#include <linux/of_device.h> > > #include <linux/platform_device.h> > > +#include <linux/reset-controller.h> > > +#include <linux/slab.h> > > What is this required for? It is no use. I will remove it. > > > #include <linux/types.h> > > #include <linux/watchdog.h> > > -#include <linux/delay.h> > > > > #define WDT_MAX_TIMEOUT 31 > > #define WDT_MIN_TIMEOUT 1 > > @@ -44,6 +49,9 @@ > > #define WDT_SWRST 0x14 > > #define WDT_SWRST_KEY 0x1209 > > > > +#define WDT_SWSYSRST 0x18U > > +#define WDT_SWSYS_RST_KEY 0x88000000 > > + > > #define DRV_NAME "mtk-wdt" > > #define DRV_VERSION "1.0" > > > > @@ -53,8 +61,97 @@ static unsigned int timeout; > > struct mtk_wdt_dev { > > struct watchdog_device wdt_dev; > > void __iomem *wdt_base; > > + spinlock_t lock; /* protects WDT_SWSYSRST reg */ > > + struct reset_controller_dev rcdev; > > +}; > > + > > +struct mtk_wdt_data { > > + int infracfg_sw_rst_num; > > This is not used at all, better remove it. I will remove it. > > > + int toprgu_sw_rst_num; > > +}; > > + > > +static const struct mtk_wdt_data mt2712_data = { > > + .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, > > +}; > > + > > +static const struct mtk_wdt_data mt8183_data = { > > + .infracfg_sw_rst_num = MT8183_INFRACFG_SW_RST_NUM, > > Same as above. I will remove it. > > > + .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, > > +}; > > + > > +static int toprgu_reset_update(struct reset_controller_dev *rcdev, > > + unsigned long id, bool assert) > > +{ > > + unsigned int tmp; > > + unsigned long flags; > > + > > This empty line can be removed. I will remove it. > > > + struct mtk_wdt_dev *data = > > + container_of(rcdev, struct mtk_wdt_dev, rcdev); > > + > > + spin_lock_irqsave(&data->lock, flags); > > + > > + tmp = readl(data->wdt_base + WDT_SWSYSRST); > > + if (assert) > > + tmp |= BIT(id); > > + else > > + tmp &= ~BIT(id); > > + tmp |= WDT_SWSYS_RST_KEY; > > + writel(tmp, data->wdt_base + WDT_SWSYSRST); > > + > > + spin_unlock_irqrestore(&data->lock, flags); > > + > > + return 0; > > +} > > + > > +static int toprgu_reset_assert(struct reset_controller_dev *rcdev, > > + unsigned long id) > > +{ > > + return toprgu_reset_update(rcdev, id, true); > > +} > > + > > +static int toprgu_reset_deassert(struct reset_controller_dev *rcdev, > > + unsigned long id) > > +{ > > + return toprgu_reset_update(rcdev, id, false); > > +} > > + > > +static int toprgu_reset(struct reset_controller_dev *rcdev, > > + unsigned long id) > > +{ > > + int ret; > > + > > + ret = toprgu_reset_assert(rcdev, id); > > + if (ret) > > + return ret; > > + > > + return toprgu_reset_deassert(rcdev, id); > > +} > > As mentioned above, is this needed? Does this work for all modules? > Only implement this if you are sure both are true. I think it's safe. Many modules has used it in MTK inside. > > regards > Philipp >
From: "yong.liang" <yong.liang@mediatek.com> This series patches add reset controller for MT8183, and audio will use it in machine driver during bootup, they depend on the for-next. v6 changes: 1. Simplify toprug_reset_assert() & toprug_reset_deassert(). 2. Add members for mt2712_data & mt8183_data. v5 changes: 1. Add Signed-off-by tag and Reviewed-by tag. v4 changes: 1. Fixed wrong signed-off as correct mail suffix. 2. Fixed patch subject that add patch version. v3 changes: 1. https://patchwork.kernel.org/patch/11164283/ and https://patchwork.kernel.org/patch/11164305/ has been merged. 2. Change the name of mtk_wdt_compatible to mtk_wdt_data. 3. Remove toprgu_reset struct and use mtk_wdt_dev instead. 4. Get the value of sw_rst_num from .h file. 5. Adddd mt2712-resets.h for mt2712. 6. Improve commit message. v2 changes: 1. remove "WIP" that in the title of patches 2. add hyper link for the patch that depends on 3. patchwork list: https://patchwork.kernel.org/cover/11164285/ https://patchwork.kernel.org/patch/11164295/ https://patchwork.kernel.org/patch/11164299/ https://patchwork.kernel.org/patch/11164283/ https://patchwork.kernel.org/patch/11164305/ v1 changes: 1. patchwork list: https://patchwork.kernel.org/cover/11164173/ https://patchwork.kernel.org/patch/11164181/ https://patchwork.kernel.org/patch/11164185/ https://patchwork.kernel.org/patch/11164187/ https://patchwork.kernel.org/patch/11164175/ yong.liang (2): arm64: dts: mt8183: Add reset-cells in infracfg clk: reset: Modify reset-controller driver .../devicetree/bindings/watchdog/mtk-wdt.txt | 10 +- drivers/watchdog/Kconfig | 1 + drivers/watchdog/mtk_wdt.c | 109 +++++++++++++++++- .../reset-controller/mt2712-resets.h | 22 ++++ .../reset-controller/mt8183-resets.h | 17 +++ 5 files changed, 155 insertions(+), 4 deletions(-) create mode 100644 include/dt-bindings/reset-controller/mt2712-resets.h