Message ID | 1307341247-26382-1-git-send-email-shawn.guo@linaro.org |
---|---|
State | New |
Headers | show |
Hi Shawn, On Mon, Jun 06, 2011 at 02:20:46PM +0800, Shawn Guo wrote: > The irq number can be easily calculated from the sum of > MXS_GPIO_IRQ_START and gpio number. The patch directly defines > gpio_to_irq for it and removes mxs_gpio_to_irq to simplify the > the driver. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > arch/arm/mach-mxs/include/mach/gpio.h | 2 +- > drivers/gpio/gpio-mxs.c | 9 --------- > 2 files changed, 1 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h > index 828cccc..18017c5 100644 > --- a/arch/arm/mach-mxs/include/mach/gpio.h > +++ b/arch/arm/mach-mxs/include/mach/gpio.h > @@ -28,8 +28,8 @@ > #define gpio_get_value __gpio_get_value > #define gpio_set_value __gpio_set_value > #define gpio_cansleep __gpio_cansleep > -#define gpio_to_irq __gpio_to_irq > > #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) > +#define gpio_to_irq(gpio) (MXS_GPIO_IRQ_START + (gpio)) NACK This is no good idea. __gpio_to_irq also works correctly for i2c gpio expanders and the like whereas your patch limits the gio_to_irq usage to internal gpios. Better to keep it like it is. Sascha > > #endif /* __MACH_MXS_GPIO_H__ */ > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > index a287614..d01f046 100644 > --- a/drivers/gpio/gpio-mxs.c > +++ b/drivers/gpio/gpio-mxs.c > @@ -236,14 +236,6 @@ static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) > writel(1 << offset, pin_addr + MXS_CLR); > } > > -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) > -{ > - struct mxs_gpio_port *port = > - container_of(chip, struct mxs_gpio_port, chip); > - > - return port->virtual_irq_start + offset; > -} > - > static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) > { > mxs_set_gpio_direction(chip, offset, 0); > @@ -327,7 +319,6 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) > port->chip.direction_output = mxs_gpio_direction_output; > port->chip.get = mxs_gpio_get; > port->chip.set = mxs_gpio_set; > - port->chip.to_irq = mxs_gpio_to_irq; > port->chip.base = port->id * 32; > port->chip.ngpio = 32; > > -- > 1.7.4.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
On Mon, Jun 06, 2011 at 02:20:47PM +0800, Shawn Guo wrote: > The gpio-mxs controller complies with basic_mmio_gpio library. This > patch converts the driver to use the library. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Given that patch 1 was nacked, I'm assuming I should ignore this patch? g. > --- > drivers/gpio/Kconfig | 1 + > drivers/gpio/gpio-mxs.c | 73 +++++++++-------------------------------------- > 2 files changed, 15 insertions(+), 59 deletions(-) > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index daaef0f..0b858e5 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -96,6 +96,7 @@ config GPIO_EXYNOS4 > config GPIO_MXS > def_bool y > depends on ARCH_MXS > + select GPIO_BASIC_MMIO_CORE > > config GPIO_PLAT_SAMSUNG > bool "Samsung SoCs GPIO library support" > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > index d01f046..9897641 100644 > --- a/drivers/gpio/gpio-mxs.c > +++ b/drivers/gpio/gpio-mxs.c > @@ -27,6 +27,7 @@ > #include <linux/gpio.h> > #include <linux/platform_device.h> > #include <linux/slab.h> > +#include <linux/basic_mmio_gpio.h> > #include <mach/mxs.h> > > #define MXS_SET 0x4 > @@ -54,7 +55,7 @@ struct mxs_gpio_port { > int irq; > int irq_high; > int virtual_irq_start; > - struct gpio_chip chip; > + struct bgpio_chip bgc; > }; > > /* Note: This driver assumes 32 GPIOs are handled in one register */ > @@ -99,8 +100,6 @@ static void mxs_gpio_unmask_irq(struct irq_data *d) > set_gpio_irqenable(port, gpio & 0x1f, 1); > } > > -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); > - > static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) > { > u32 gpio = irq_to_gpio(d->irq); > @@ -203,53 +202,6 @@ static struct irq_chip gpio_irq_chip = { > .irq_set_wake = mxs_gpio_set_wake_irq, > }; > > -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, > - int dir) > -{ > - struct mxs_gpio_port *port = > - container_of(chip, struct mxs_gpio_port, chip); > - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); > - > - if (dir) > - writel(1 << offset, pin_addr + MXS_SET); > - else > - writel(1 << offset, pin_addr + MXS_CLR); > -} > - > -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) > -{ > - struct mxs_gpio_port *port = > - container_of(chip, struct mxs_gpio_port, chip); > - > - return (readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; > -} > - > -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) > -{ > - struct mxs_gpio_port *port = > - container_of(chip, struct mxs_gpio_port, chip); > - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); > - > - if (value) > - writel(1 << offset, pin_addr + MXS_SET); > - else > - writel(1 << offset, pin_addr + MXS_CLR); > -} > - > -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) > -{ > - mxs_set_gpio_direction(chip, offset, 0); > - return 0; > -} > - > -static int mxs_gpio_direction_output(struct gpio_chip *chip, > - unsigned offset, int value) > -{ > - mxs_gpio_set(chip, offset, value); > - mxs_set_gpio_direction(chip, offset, 1); > - return 0; > -} > - > static int __devinit mxs_gpio_probe(struct platform_device *pdev) > { > static void __iomem *base; > @@ -314,20 +266,23 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) > irq_set_chained_handler(port->irq, mxs_gpio_irq_handler); > irq_set_handler_data(port->irq, port); > > - /* register gpio chip */ > - port->chip.direction_input = mxs_gpio_direction_input; > - port->chip.direction_output = mxs_gpio_direction_output; > - port->chip.get = mxs_gpio_get; > - port->chip.set = mxs_gpio_set; > - port->chip.base = port->id * 32; > - port->chip.ngpio = 32; > - > - err = gpiochip_add(&port->chip); > + err = bgpio_init(&port->bgc, &pdev->dev, 4, > + port->base + PINCTRL_DIN(port->id), > + port->base + PINCTRL_DOUT(port->id), NULL, > + port->base + PINCTRL_DOE(port->id), NULL, false); > if (err) > goto out_iounmap; > > + port->bgc.gc.base = port->id * 32; > + > + err = gpiochip_add(&port->bgc.gc); > + if (err) > + goto out_bgpio_remove; > + > return 0; > > +out_bgpio_remove: > + bgpio_remove(&port->bgc); > out_iounmap: > if (iores) > iounmap(port->base); > -- > 1.7.4.1 >
On Mon, Jun 06, 2011 at 02:19:35AM -0600, Grant Likely wrote: > On Mon, Jun 06, 2011 at 02:20:47PM +0800, Shawn Guo wrote: > > The gpio-mxs controller complies with basic_mmio_gpio library. This > > patch converts the driver to use the library. > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > Given that patch 1 was nacked, I'm assuming I should ignore this patch? > Yes. I will send a v2 of this patch.
On Mon, Jun 06, 2011 at 10:02:16AM +0200, Sascha Hauer wrote: > Hi Shawn, > > On Mon, Jun 06, 2011 at 02:20:46PM +0800, Shawn Guo wrote: > > The irq number can be easily calculated from the sum of > > MXS_GPIO_IRQ_START and gpio number. The patch directly defines > > gpio_to_irq for it and removes mxs_gpio_to_irq to simplify the > > the driver. > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > --- > > arch/arm/mach-mxs/include/mach/gpio.h | 2 +- > > drivers/gpio/gpio-mxs.c | 9 --------- > > 2 files changed, 1 insertions(+), 10 deletions(-) > > > > diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h > > index 828cccc..18017c5 100644 > > --- a/arch/arm/mach-mxs/include/mach/gpio.h > > +++ b/arch/arm/mach-mxs/include/mach/gpio.h > > @@ -28,8 +28,8 @@ > > #define gpio_get_value __gpio_get_value > > #define gpio_set_value __gpio_set_value > > #define gpio_cansleep __gpio_cansleep > > -#define gpio_to_irq __gpio_to_irq > > > > #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) > > +#define gpio_to_irq(gpio) (MXS_GPIO_IRQ_START + (gpio)) > > NACK > > This is no good idea. __gpio_to_irq also works correctly for i2c gpio > expanders and the like whereas your patch limits the gio_to_irq usage to > internal gpios. Better to keep it like it is. > What I was trying to do is moving gpio-mxs one step closer to gpio-mxc. I thought what gpio-mxc is doing should have been proved fine by a wider users/platforms. But you are telling this is one step backward. Then I will drop the patch.
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h index 828cccc..18017c5 100644 --- a/arch/arm/mach-mxs/include/mach/gpio.h +++ b/arch/arm/mach-mxs/include/mach/gpio.h @@ -28,8 +28,8 @@ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value #define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) +#define gpio_to_irq(gpio) (MXS_GPIO_IRQ_START + (gpio)) #endif /* __MACH_MXS_GPIO_H__ */ diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index a287614..d01f046 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -236,14 +236,6 @@ static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) writel(1 << offset, pin_addr + MXS_CLR); } -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { mxs_set_gpio_direction(chip, offset, 0); @@ -327,7 +319,6 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) port->chip.direction_output = mxs_gpio_direction_output; port->chip.get = mxs_gpio_get; port->chip.set = mxs_gpio_set; - port->chip.to_irq = mxs_gpio_to_irq; port->chip.base = port->id * 32; port->chip.ngpio = 32;
The irq number can be easily calculated from the sum of MXS_GPIO_IRQ_START and gpio number. The patch directly defines gpio_to_irq for it and removes mxs_gpio_to_irq to simplify the the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/mach-mxs/include/mach/gpio.h | 2 +- drivers/gpio/gpio-mxs.c | 9 --------- 2 files changed, 1 insertions(+), 10 deletions(-)