diff mbox series

[U-Boot,v2] rockchip: rk3399: Add Leez P710 support

Message ID 20190922100656.22256-1-andyshrk@gmail.com
State Accepted
Commit a4bbc662fc7cea596e94ad8623202df7a2c50e27
Delegated to: Kever Yang
Headers show
Series [U-Boot,v2] rockchip: rk3399: Add Leez P710 support | expand

Commit Message

Andyshrk Sept. 22, 2019, 10:06 a.m. UTC
From: Andy Yan <andyshrk@gmail.com>

Specification
- Rockchip RK3399
- LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply

Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1:
"arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
(sha1: 	fc702ed49a8668a17343811ee28214d845bfc5e6)

Signed-off-by: Andy Yan <anyshrk@gmail.com>

---

Changes in v2:
- Update board/rockchip/evb_rk3399/MAINTAINERS file
- Add Linux dts sync commit details as Jagan's wish

 arch/arm/dts/Makefile                     |   1 +
 arch/arm/dts/rk3399-leez-p710-u-boot.dtsi |  13 +
 arch/arm/dts/rk3399-leez-p710.dts         | 645 ++++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS     |   6 +
 configs/leez-rk3399_defconfig             |  58 ++
 5 files changed, 723 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-leez-p710.dts
 create mode 100644 configs/leez-rk3399_defconfig

Comments

Kever Yang Sept. 27, 2019, 1 a.m. UTC | #1
On 2019/9/22 下午6:06, Andyshrk wrote:
> From: Andy Yan <andyshrk@gmail.com>
>
> Specification
> - Rockchip RK3399
> - LPDDR4
> - TF sd scard slot
> - eMMC
> - M.2 B-Key for 4G LTE
> - AP6256 for WiFi + BT
> - Gigabit ethernet
> - HDMI out
> - 40 pin header
> - USB 2.0 x 2
> - USB 3.0 x 1
> - USB 3.0 Type-C x 1
> - TYPE-C Power supply
>
> Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1:
> "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
> (sha1: 	fc702ed49a8668a17343811ee28214d845bfc5e6)
>
> Signed-off-by: Andy Yan <anyshrk@gmail.com>

Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

Thanks,
- Kever
>
> ---
>
> Changes in v2:
> - Update board/rockchip/evb_rk3399/MAINTAINERS file
> - Add Linux dts sync commit details as Jagan's wish
>
>   arch/arm/dts/Makefile                     |   1 +
>   arch/arm/dts/rk3399-leez-p710-u-boot.dtsi |  13 +
>   arch/arm/dts/rk3399-leez-p710.dts         | 645 ++++++++++++++++++++++
>   board/rockchip/evb_rk3399/MAINTAINERS     |   6 +
>   configs/leez-rk3399_defconfig             |  58 ++
>   5 files changed, 723 insertions(+)
>   create mode 100644 arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
>   create mode 100644 arch/arm/dts/rk3399-leez-p710.dts
>   create mode 100644 configs/leez-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 62da168ef86..dbb062edda6 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -111,6 +111,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
>   	rk3399-khadas-edge.dtb \
>   	rk3399-khadas-edge-captain.dtb \
>   	rk3399-khadas-edge-v.dtb \
> +	rk3399-leez-p710.dtb \
>   	rk3399-nanopc-t4.dtb \
>   	rk3399-nanopi-m4.dtb \
>   	rk3399-nanopi-neo4.dtb \
> diff --git a/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
> new file mode 100644
> index 00000000000..f8b2a1d56e7
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr4-100.dtsi"
> +
> +/ {
> +	chosen {
> +		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
> +	};
> +};
> diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
> new file mode 100644
> index 00000000000..32baa57b948
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-leez-p710.dts
> @@ -0,0 +1,645 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> +	model = "Leez RK3399 P710";
> +	compatible = "leez,p710", "rockchip,rk3399";
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	clkin_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clkin_gmac";
> +		#clock-cells = <0>;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&rk808 1>;
> +		clock-names = "ext_clock";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_reg_on_h>;
> +		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	dc5v_adp: dc5v-adp {
> +		compatible = "regulator-fixed";
> +		regulator-name = "dc5v_adapter";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc5v_adp>;
> +	};
> +
> +	vcc3v3_sys: vcc3v3-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_host";
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-min-microvolt = <5500000>;
> +		regulator-max-microvolt = <5500000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_host3: vcc5v0-host3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_host3";
> +		enable-active-high;
> +		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_host3_en>;
> +		regulator-always-on;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_lan: vcc3v3-lan {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_lan";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vim-supply = <&vcc3v3_sys>;
> +	};
> +
> +	vdd_log: vdd-log {
> +		compatible = "pwm-regulator";
> +		pwms = <&pwm2 0 25000 1>;
> +		regulator-name = "vdd_log";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <800000>;
> +		regulator-max-microvolt = <1400000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> +	status = "okay";
> +};
> +
> +&gmac {
> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> +	assigned-clock-parents = <&clkin_gmac>;
> +	clock_in_out = "input";
> +	phy-supply = <&vcc3v3_lan>;
> +	phy-mode = "rgmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_pins>;
> +	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 10000 50000>;
> +	tx_delay = <0x28>;
> +	rx_delay = <0x11>;
> +	status = "okay";
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu>;
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	ddc-i2c-bus = <&i2c7>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&hdmi_cec>;
> +	status = "okay";
> +};
> +
> +&hdmi_sound {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	i2c-scl-rising-time-ns = <168>;
> +	i2c-scl-falling-time-ns = <4>;
> +	status = "okay";
> +
> +	rk808: pmic@1b {
> +		compatible = "rockchip,rk808";
> +		reg = <0x1b>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> +		#clock-cells = <1>;
> +		clock-output-names = "xin32k", "rk808-clkout2";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int_l>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc6-supply = <&vcc5v0_sys>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +		vcc10-supply = <&vcc5v0_sys>;
> +		vcc11-supply = <&vcc5v0_sys>;
> +		vcc12-supply = <&vcc3v3_sys>;
> +		vddio-supply = <&vcc_1v8>;
> +
> +		regulators {
> +			vdd_center: DCDC_REG1 {
> +				regulator-name = "vdd_center";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_l: DCDC_REG2 {
> +				regulator-name = "vdd_cpu_l";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8: DCDC_REG4 {
> +				regulator-name = "vcc_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc1v8_dvp: LDO_REG1 {
> +				regulator-name = "vcc1v8_dvp";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc1v8_hdmi: LDO_REG2 {
> +				regulator-name = "vcc1v8_hdmi";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcca_1v8: LDO_REG3 {
> +				regulator-name = "vcca_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vccio_sd: LDO_REG4 {
> +				regulator-name = "vccio_sd";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3000000>;
> +				};
> +			};
> +
> +			vcca3v0_codec: LDO_REG5 {
> +				regulator-name = "vcca3v0_codec";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v5: LDO_REG6 {
> +				regulator-name = "vcc_1v5";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1500000>;
> +				};
> +			};
> +
> +			vcc0v9_hdmi: LDO_REG7 {
> +				regulator-name = "vcc0v9_hdmi";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v0: LDO_REG8 {
> +				regulator-name = "vcc_3v0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3000000>;
> +				};
> +			};
> +		};
> +	};
> +
> +	vdd_cpu_b: regulator@40 {
> +		compatible = "silergy,syr827";
> +		reg = <0x40>;
> +		fcs,suspend-voltage-selector = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel1_gpio>;
> +		regulator-name = "vdd_cpu_b";
> +		regulator-min-microvolt = <712500>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-ramp-delay = <1000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_gpu: regulator@41 {
> +		compatible = "silergy,syr828";
> +		reg = <0x41>;
> +		fcs,suspend-voltage-selector = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel2_gpio>;
> +		regulator-name = "vdd_gpu";
> +		regulator-min-microvolt = <712500>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-ramp-delay = <1000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	i2c-scl-rising-time-ns = <300>;
> +	i2c-scl-falling-time-ns = <15>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	i2c-scl-rising-time-ns = <450>;
> +	i2c-scl-falling-time-ns = <15>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	i2c-scl-rising-time-ns = <600>;
> +	i2c-scl-falling-time-ns = <20>;
> +	status = "okay";
> +};
> +
> +&i2c7 {
> +	status = "okay";
> +};
> +
> +&i2s0 {
> +	rockchip,playback-channels = <8>;
> +	rockchip,capture-channels = <8>;
> +	status = "okay";
> +};
> +
> +&i2s1 {
> +	rockchip,playback-channels = <2>;
> +	rockchip,capture-channels = <2>;
> +	status = "okay";
> +};
> +
> +&i2s2 {
> +	status = "okay";
> +};
> +
> +&io_domains {
> +	status = "okay";
> +
> +	bt656-supply = <&vcc1v8_dvp>;
> +	audio-supply = <&vcc_1v8>;
> +	sdmmc-supply = <&vccio_sd>;
> +	gpio1830-supply = <&vcc_3v0>;
> +};
> +
> +&pmu_io_domains {
> +	status = "okay";
> +	pmu1830-supply = <&vcc_3v0>;
> +};
> +
> +&pinctrl {
> +	bt {
> +		bt_reg_on_h: bt-reg-on-h {
> +			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_host_wake_l: bt-host-wake-l {
> +			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_wake_l: bt-wake-l {
> +			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		pmic_int_l: pmic-int-l {
> +			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		vsel1_gpio: vsel1-gpio {
> +			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +
> +		vsel2_gpio: vsel2-gpio {
> +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	usb2 {
> +		vcc5v0_host3_en: vcc5v0-host3-en {
> +			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	wifi {
> +		wifi_reg_on_h: wifi-reg-on-h {
> +			rockchip,pins =
> +				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		wifi_host_wake_l: wifi-host-wake-l {
> +			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +
> +	vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdio0 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	bus-width = <4>;
> +	clock-frequency = <50000000>;
> +	cap-sdio-irq;
> +	cap-sd-highspeed;
> +	keep-power-in-suspend;
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> +	sd-uhs-sdr104;
> +	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		compatible = "brcm,bcm4329-fmac";
> +		reg = <1>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
> +		interrupt-names = "host-wake";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_host_wake_l>;
> +	};
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	max-frequency = <150000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&tcphy0 {
> +	status = "okay";
> +};
> +
> +&tcphy1 {
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	status = "okay";
> +
> +	/* tshut mode 0:CRU 1:GPIO */
> +	rockchip,hw-tshut-mode = <1>;
> +	/* tshut polarity 0:LOW 1:HIGH */
> +	rockchip,hw-tshut-polarity = <1>;
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +
> +	u2phy0_otg: otg-port {
> +		status = "okay";
> +	};
> +
> +	u2phy0_host: host-port {
> +		phy-supply = <&vcc5v0_host0>;
> +		status = "okay";
> +	};
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +
> +	u2phy1_otg: otg-port {
> +		status = "okay";
> +	};
> +
> +	u2phy1_host: host-port {
> +		phy-supply = <&vcc5v0_host1>;
> +		status = "okay";
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		clocks = <&rk808 1>;
> +		clock-names = "ext_clock";
> +		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> +		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
> +	};
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usbdrd3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> +	status = "okay";
> +	dr_mode = "otg";
> +};
> +
> +&usbdrd3_1 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&vopb {
> +	status = "okay";
> +};
> +
> +&vopb_mmu {
> +	status = "okay";
> +};
> +
> +&vopl {
> +	status = "okay";
> +};
> +
> +&vopl_mmu {
> +	status = "okay";
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index f8299d94601..139791795ec 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -24,6 +24,12 @@ S:	Maintained
>   F:	configs/khadas-edge-v-rk3399_defconfig
>   F:	arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
>   
> +LEEZ-P710
> +M:	Andy Yan <andy.yan@rock-chips.com>
> +S:      Maintained
> +F:	arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
> +F:	configs/leez-rk3399_defconfig
> +
>   NANOPC-T4
>   M:	Jagan Teki <jagan@amarulasolutions.com>
>   S:	Maintained
> diff --git a/configs/leez-rk3399_defconfig b/configs/leez-rk3399_defconfig
> new file mode 100644
> index 00000000000..4757aaaec44
> --- /dev/null
> +++ b/configs/leez-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> +CONFIG_TPL=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-leez-p710"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_RAM_RK3399_LPDDR4=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
Kever Yang Oct. 14, 2019, 9:09 a.m. UTC | #2
On 2019/9/27 上午9:00, Kever Yang wrote:
>
> On 2019/9/22 下午6:06, Andyshrk wrote:
>> From: Andy Yan <andyshrk@gmail.com>
>>
>> Specification
>> - Rockchip RK3399
>> - LPDDR4
>> - TF sd scard slot
>> - eMMC
>> - M.2 B-Key for 4G LTE
>> - AP6256 for WiFi + BT
>> - Gigabit ethernet
>> - HDMI out
>> - 40 pin header
>> - USB 2.0 x 2
>> - USB 3.0 x 1
>> - USB 3.0 Type-C x 1
>> - TYPE-C Power supply
>>
>> Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 
>> 5.4-rc1:
>> "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
>> (sha1:     fc702ed49a8668a17343811ee28214d845bfc5e6)
>>
>> Signed-off-by: Andy Yan <anyshrk@gmail.com>
>
> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

Applied to u-boot-rockchip master.


>
> Thanks,
> - Kever
>>
>> ---
>>
>> Changes in v2:
>> - Update board/rockchip/evb_rk3399/MAINTAINERS file
>> - Add Linux dts sync commit details as Jagan's wish
>>
>>   arch/arm/dts/Makefile                     |   1 +
>>   arch/arm/dts/rk3399-leez-p710-u-boot.dtsi |  13 +
>>   arch/arm/dts/rk3399-leez-p710.dts         | 645 ++++++++++++++++++++++
>>   board/rockchip/evb_rk3399/MAINTAINERS     |   6 +
>>   configs/leez-rk3399_defconfig             |  58 ++
>>   5 files changed, 723 insertions(+)
>>   create mode 100644 arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/rk3399-leez-p710.dts
>>   create mode 100644 configs/leez-rk3399_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 62da168ef86..dbb062edda6 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -111,6 +111,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
>>       rk3399-khadas-edge.dtb \
>>       rk3399-khadas-edge-captain.dtb \
>>       rk3399-khadas-edge-v.dtb \
>> +    rk3399-leez-p710.dtb \
>>       rk3399-nanopc-t4.dtb \
>>       rk3399-nanopi-m4.dtb \
>>       rk3399-nanopi-neo4.dtb \
>> diff --git a/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi 
>> b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
>> new file mode 100644
>> index 00000000000..f8b2a1d56e7
>> --- /dev/null
>> +++ b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
>> @@ -0,0 +1,13 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
>> + */
>> +
>> +#include "rk3399-u-boot.dtsi"
>> +#include "rk3399-sdram-lpddr4-100.dtsi"
>> +
>> +/ {
>> +    chosen {
>> +        u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
>> +    };
>> +};
>> diff --git a/arch/arm/dts/rk3399-leez-p710.dts 
>> b/arch/arm/dts/rk3399-leez-p710.dts
>> new file mode 100644
>> index 00000000000..32baa57b948
>> --- /dev/null
>> +++ b/arch/arm/dts/rk3399-leez-p710.dts
>> @@ -0,0 +1,645 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/input/linux-event-codes.h>
>> +#include <dt-bindings/pwm/pwm.h>
>> +#include "rk3399.dtsi"
>> +#include "rk3399-opp.dtsi"
>> +
>> +/ {
>> +    model = "Leez RK3399 P710";
>> +    compatible = "leez,p710", "rockchip,rk3399";
>> +
>> +    chosen {
>> +        stdout-path = "serial2:1500000n8";
>> +    };
>> +
>> +    clkin_gmac: external-gmac-clock {
>> +        compatible = "fixed-clock";
>> +        clock-frequency = <125000000>;
>> +        clock-output-names = "clkin_gmac";
>> +        #clock-cells = <0>;
>> +    };
>> +
>> +    sdio_pwrseq: sdio-pwrseq {
>> +        compatible = "mmc-pwrseq-simple";
>> +        clocks = <&rk808 1>;
>> +        clock-names = "ext_clock";
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&wifi_reg_on_h>;
>> +        reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>> +    };
>> +
>> +    dc5v_adp: dc5v-adp {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "dc5v_adapter";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-min-microvolt = <5000000>;
>> +        regulator-max-microvolt = <5000000>;
>> +    };
>> +
>> +    vcc5v0_sys: vcc5v0-sys {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vcc5v0_sys";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-min-microvolt = <5000000>;
>> +        regulator-max-microvolt = <5000000>;
>> +        vin-supply = <&dc5v_adp>;
>> +    };
>> +
>> +    vcc3v3_sys: vcc3v3-sys {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vcc3v3_sys";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-min-microvolt = <3300000>;
>> +        regulator-max-microvolt = <3300000>;
>> +        vin-supply = <&vcc5v0_sys>;
>> +    };
>> +
>> +    vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vcc5v0_host";
>> +        regulator-boot-on;
>> +        regulator-always-on;
>> +        regulator-min-microvolt = <5500000>;
>> +        regulator-max-microvolt = <5500000>;
>> +        vin-supply = <&vcc5v0_sys>;
>> +    };
>> +
>> +    vcc5v0_host3: vcc5v0-host3 {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vcc5v0_host3";
>> +        enable-active-high;
>> +        gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&vcc5v0_host3_en>;
>> +        regulator-always-on;
>> +        vin-supply = <&vcc5v0_sys>;
>> +    };
>> +
>> +    vcc3v3_lan: vcc3v3-lan {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "vcc3v3_lan";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-min-microvolt = <3300000>;
>> +        regulator-max-microvolt = <3300000>;
>> +        vim-supply = <&vcc3v3_sys>;
>> +    };
>> +
>> +    vdd_log: vdd-log {
>> +        compatible = "pwm-regulator";
>> +        pwms = <&pwm2 0 25000 1>;
>> +        regulator-name = "vdd_log";
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        regulator-min-microvolt = <800000>;
>> +        regulator-max-microvolt = <1400000>;
>> +        vin-supply = <&vcc5v0_sys>;
>> +    };
>> +};
>> +
>> +&cpu_l0 {
>> +    cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l1 {
>> +    cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l2 {
>> +    cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l3 {
>> +    cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_b0 {
>> +    cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&cpu_b1 {
>> +    cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&emmc_phy {
>> +    status = "okay";
>> +};
>> +
>> +&gmac {
>> +    assigned-clocks = <&cru SCLK_RMII_SRC>;
>> +    assigned-clock-parents = <&clkin_gmac>;
>> +    clock_in_out = "input";
>> +    phy-supply = <&vcc3v3_lan>;
>> +    phy-mode = "rgmii";
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&rgmii_pins>;
>> +    snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
>> +    snps,reset-active-low;
>> +    snps,reset-delays-us = <0 10000 50000>;
>> +    tx_delay = <0x28>;
>> +    rx_delay = <0x11>;
>> +    status = "okay";
>> +};
>> +
>> +&gpu {
>> +    mali-supply = <&vdd_gpu>;
>> +    status = "okay";
>> +};
>> +
>> +&hdmi {
>> +    ddc-i2c-bus = <&i2c7>;
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&hdmi_cec>;
>> +    status = "okay";
>> +};
>> +
>> +&hdmi_sound {
>> +    status = "okay";
>> +};
>> +
>> +&i2c0 {
>> +    clock-frequency = <400000>;
>> +    i2c-scl-rising-time-ns = <168>;
>> +    i2c-scl-falling-time-ns = <4>;
>> +    status = "okay";
>> +
>> +    rk808: pmic@1b {
>> +        compatible = "rockchip,rk808";
>> +        reg = <0x1b>;
>> +        interrupt-parent = <&gpio1>;
>> +        interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
>> +        #clock-cells = <1>;
>> +        clock-output-names = "xin32k", "rk808-clkout2";
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&pmic_int_l>;
>> +        rockchip,system-power-controller;
>> +        wakeup-source;
>> +
>> +        vcc1-supply = <&vcc5v0_sys>;
>> +        vcc2-supply = <&vcc5v0_sys>;
>> +        vcc3-supply = <&vcc5v0_sys>;
>> +        vcc4-supply = <&vcc5v0_sys>;
>> +        vcc6-supply = <&vcc5v0_sys>;
>> +        vcc7-supply = <&vcc5v0_sys>;
>> +        vcc8-supply = <&vcc3v3_sys>;
>> +        vcc9-supply = <&vcc5v0_sys>;
>> +        vcc10-supply = <&vcc5v0_sys>;
>> +        vcc11-supply = <&vcc5v0_sys>;
>> +        vcc12-supply = <&vcc3v3_sys>;
>> +        vddio-supply = <&vcc_1v8>;
>> +
>> +        regulators {
>> +            vdd_center: DCDC_REG1 {
>> +                regulator-name = "vdd_center";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <750000>;
>> +                regulator-max-microvolt = <1350000>;
>> +                regulator-ramp-delay = <6001>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vdd_cpu_l: DCDC_REG2 {
>> +                regulator-name = "vdd_cpu_l";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <750000>;
>> +                regulator-max-microvolt = <1350000>;
>> +                regulator-ramp-delay = <6001>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcc_ddr: DCDC_REG3 {
>> +                regulator-name = "vcc_ddr";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcc_1v8: DCDC_REG4 {
>> +                regulator-name = "vcc_1v8";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                    regulator-suspend-microvolt = <1800000>;
>> +                };
>> +            };
>> +
>> +            vcc1v8_dvp: LDO_REG1 {
>> +                regulator-name = "vcc1v8_dvp";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcc1v8_hdmi: LDO_REG2 {
>> +                regulator-name = "vcc1v8_hdmi";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcca_1v8: LDO_REG3 {
>> +                regulator-name = "vcca_1v8";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <1800000>;
>> +                regulator-max-microvolt = <1800000>;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                    regulator-suspend-microvolt = <1800000>;
>> +                };
>> +            };
>> +
>> +            vccio_sd: LDO_REG4 {
>> +                regulator-name = "vccio_sd";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <3000000>;
>> +                regulator-max-microvolt = <3000000>;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                    regulator-suspend-microvolt = <3000000>;
>> +                };
>> +            };
>> +
>> +            vcca3v0_codec: LDO_REG5 {
>> +                regulator-name = "vcca3v0_codec";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <3000000>;
>> +                regulator-max-microvolt = <3000000>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcc_1v5: LDO_REG6 {
>> +                regulator-name = "vcc_1v5";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <1500000>;
>> +                regulator-max-microvolt = <1500000>;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                    regulator-suspend-microvolt = <1500000>;
>> +                };
>> +            };
>> +
>> +            vcc0v9_hdmi: LDO_REG7 {
>> +                regulator-name = "vcc0v9_hdmi";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <900000>;
>> +                regulator-max-microvolt = <900000>;
>> +                regulator-state-mem {
>> +                    regulator-off-in-suspend;
>> +                };
>> +            };
>> +
>> +            vcc_3v0: LDO_REG8 {
>> +                regulator-name = "vcc_3v0";
>> +                regulator-always-on;
>> +                regulator-boot-on;
>> +                regulator-min-microvolt = <3000000>;
>> +                regulator-max-microvolt = <3000000>;
>> +                regulator-state-mem {
>> +                    regulator-on-in-suspend;
>> +                    regulator-suspend-microvolt = <3000000>;
>> +                };
>> +            };
>> +        };
>> +    };
>> +
>> +    vdd_cpu_b: regulator@40 {
>> +        compatible = "silergy,syr827";
>> +        reg = <0x40>;
>> +        fcs,suspend-voltage-selector = <1>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&vsel1_gpio>;
>> +        regulator-name = "vdd_cpu_b";
>> +        regulator-min-microvolt = <712500>;
>> +        regulator-max-microvolt = <1500000>;
>> +        regulator-ramp-delay = <1000>;
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        vin-supply = <&vcc5v0_sys>;
>> +
>> +        regulator-state-mem {
>> +            regulator-off-in-suspend;
>> +        };
>> +    };
>> +
>> +    vdd_gpu: regulator@41 {
>> +        compatible = "silergy,syr828";
>> +        reg = <0x41>;
>> +        fcs,suspend-voltage-selector = <1>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&vsel2_gpio>;
>> +        regulator-name = "vdd_gpu";
>> +        regulator-min-microvolt = <712500>;
>> +        regulator-max-microvolt = <1500000>;
>> +        regulator-ramp-delay = <1000>;
>> +        regulator-always-on;
>> +        regulator-boot-on;
>> +        vin-supply = <&vcc5v0_sys>;
>> +
>> +        regulator-state-mem {
>> +            regulator-off-in-suspend;
>> +        };
>> +    };
>> +};
>> +
>> +&i2c1 {
>> +    i2c-scl-rising-time-ns = <300>;
>> +    i2c-scl-falling-time-ns = <15>;
>> +    status = "okay";
>> +};
>> +
>> +&i2c3 {
>> +    i2c-scl-rising-time-ns = <450>;
>> +    i2c-scl-falling-time-ns = <15>;
>> +    status = "okay";
>> +};
>> +
>> +&i2c4 {
>> +    i2c-scl-rising-time-ns = <600>;
>> +    i2c-scl-falling-time-ns = <20>;
>> +    status = "okay";
>> +};
>> +
>> +&i2c7 {
>> +    status = "okay";
>> +};
>> +
>> +&i2s0 {
>> +    rockchip,playback-channels = <8>;
>> +    rockchip,capture-channels = <8>;
>> +    status = "okay";
>> +};
>> +
>> +&i2s1 {
>> +    rockchip,playback-channels = <2>;
>> +    rockchip,capture-channels = <2>;
>> +    status = "okay";
>> +};
>> +
>> +&i2s2 {
>> +    status = "okay";
>> +};
>> +
>> +&io_domains {
>> +    status = "okay";
>> +
>> +    bt656-supply = <&vcc1v8_dvp>;
>> +    audio-supply = <&vcc_1v8>;
>> +    sdmmc-supply = <&vccio_sd>;
>> +    gpio1830-supply = <&vcc_3v0>;
>> +};
>> +
>> +&pmu_io_domains {
>> +    status = "okay";
>> +    pmu1830-supply = <&vcc_3v0>;
>> +};
>> +
>> +&pinctrl {
>> +    bt {
>> +        bt_reg_on_h: bt-reg-on-h {
>> +            rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +
>> +        bt_host_wake_l: bt-host-wake-l {
>> +            rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +
>> +        bt_wake_l: bt-wake-l {
>> +            rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +    };
>> +
>> +    pmic {
>> +        pmic_int_l: pmic-int-l {
>> +            rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>> +        };
>> +
>> +        vsel1_gpio: vsel1-gpio {
>> +            rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>> +        };
>> +
>> +        vsel2_gpio: vsel2-gpio {
>> +            rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>> +        };
>> +    };
>> +
>> +    usb2 {
>> +        vcc5v0_host3_en: vcc5v0-host3-en {
>> +            rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +    };
>> +
>> +    wifi {
>> +        wifi_reg_on_h: wifi-reg-on-h {
>> +            rockchip,pins =
>> +                <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +
>> +        wifi_host_wake_l: wifi-host-wake-l {
>> +            rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +    };
>> +};
>> +
>> +&pwm2 {
>> +    status = "okay";
>> +};
>> +
>> +&saradc {
>> +    status = "okay";
>> +
>> +    vref-supply = <&vcc_1v8>;
>> +};
>> +
>> +&sdio0 {
>> +    #address-cells = <1>;
>> +    #size-cells = <0>;
>> +    bus-width = <4>;
>> +    clock-frequency = <50000000>;
>> +    cap-sdio-irq;
>> +    cap-sd-highspeed;
>> +    keep-power-in-suspend;
>> +    mmc-pwrseq = <&sdio_pwrseq>;
>> +    non-removable;
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
>> +    sd-uhs-sdr104;
>> +    status = "okay";
>> +
>> +    brcmf: wifi@1 {
>> +        compatible = "brcm,bcm4329-fmac";
>> +        reg = <1>;
>> +        interrupt-parent = <&gpio0>;
>> +        interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
>> +        interrupt-names = "host-wake";
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&wifi_host_wake_l>;
>> +    };
>> +};
>> +
>> +&sdmmc {
>> +    bus-width = <4>;
>> +    cap-mmc-highspeed;
>> +    cap-sd-highspeed;
>> +    cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
>> +    disable-wp;
>> +    max-frequency = <150000000>;
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
>> +    status = "okay";
>> +};
>> +
>> +&sdhci {
>> +    bus-width = <8>;
>> +    mmc-hs400-1_8v;
>> +    mmc-hs400-enhanced-strobe;
>> +    non-removable;
>> +    status = "okay";
>> +};
>> +
>> +&tcphy0 {
>> +    status = "okay";
>> +};
>> +
>> +&tcphy1 {
>> +    status = "okay";
>> +};
>> +
>> +&tsadc {
>> +    status = "okay";
>> +
>> +    /* tshut mode 0:CRU 1:GPIO */
>> +    rockchip,hw-tshut-mode = <1>;
>> +    /* tshut polarity 0:LOW 1:HIGH */
>> +    rockchip,hw-tshut-polarity = <1>;
>> +};
>> +
>> +&u2phy0 {
>> +    status = "okay";
>> +
>> +    u2phy0_otg: otg-port {
>> +        status = "okay";
>> +    };
>> +
>> +    u2phy0_host: host-port {
>> +        phy-supply = <&vcc5v0_host0>;
>> +        status = "okay";
>> +    };
>> +};
>> +
>> +&u2phy1 {
>> +    status = "okay";
>> +
>> +    u2phy1_otg: otg-port {
>> +        status = "okay";
>> +    };
>> +
>> +    u2phy1_host: host-port {
>> +        phy-supply = <&vcc5v0_host1>;
>> +        status = "okay";
>> +    };
>> +};
>> +
>> +&uart0 {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>> +    status = "okay";
>> +
>> +    bluetooth {
>> +        compatible = "brcm,bcm43438-bt";
>> +        clocks = <&rk808 1>;
>> +        clock-names = "ext_clock";
>> +        device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
>> +        host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
>> +        shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
>> +    };
>> +};
>> +
>> +&uart2 {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> +    status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd3_0 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_0 {
>> +    status = "okay";
>> +    dr_mode = "otg";
>> +};
>> +
>> +&usbdrd3_1 {
>> +    status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_1 {
>> +    status = "okay";
>> +    dr_mode = "host";
>> +};
>> +
>> +&vopb {
>> +    status = "okay";
>> +};
>> +
>> +&vopb_mmu {
>> +    status = "okay";
>> +};
>> +
>> +&vopl {
>> +    status = "okay";
>> +};
>> +
>> +&vopl_mmu {
>> +    status = "okay";
>> +};
>> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS 
>> b/board/rockchip/evb_rk3399/MAINTAINERS
>> index f8299d94601..139791795ec 100644
>> --- a/board/rockchip/evb_rk3399/MAINTAINERS
>> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
>> @@ -24,6 +24,12 @@ S:    Maintained
>>   F:    configs/khadas-edge-v-rk3399_defconfig
>>   F:    arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
>>   +LEEZ-P710
>> +M:    Andy Yan <andy.yan@rock-chips.com>
>> +S:      Maintained
>> +F:    arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
>> +F:    configs/leez-rk3399_defconfig
>> +
>>   NANOPC-T4
>>   M:    Jagan Teki <jagan@amarulasolutions.com>
>>   S:    Maintained
>> diff --git a/configs/leez-rk3399_defconfig 
>> b/configs/leez-rk3399_defconfig
>> new file mode 100644
>> index 00000000000..4757aaaec44
>> --- /dev/null
>> +++ b/configs/leez-rk3399_defconfig
>> @@ -0,0 +1,58 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_ROCKCHIP=y
>> +CONFIG_SYS_TEXT_BASE=0x00200000
>> +CONFIG_ROCKCHIP_RK3399=y
>> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_SPL_STACK_R_ADDR=0x80000
>> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
>> +CONFIG_DEBUG_UART_CLOCK=24000000
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +CONFIG_DISPLAY_BOARDINFO_LATE=y
>> +CONFIG_SPL_STACK_R=y
>> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>> +CONFIG_TPL=y
>> +CONFIG_CMD_BOOTZ=y
>> +CONFIG_CMD_GPT=y
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_USB=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_TIME=y
>> +CONFIG_SPL_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-leez-p710"
>> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names 
>> interrupt-parent assigned-clocks assigned-clock-rates 
>> assigned-clock-parents"
>> +CONFIG_ENV_IS_IN_MMC=y
>> +CONFIG_RAM_RK3399_LPDDR4=y
>> +CONFIG_ROCKCHIP_GPIO=y
>> +CONFIG_SYS_I2C_ROCKCHIP=y
>> +CONFIG_MMC_DW=y
>> +CONFIG_MMC_DW_ROCKCHIP=y
>> +CONFIG_MMC_SDHCI=y
>> +CONFIG_MMC_SDHCI_ROCKCHIP=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_ETH_DESIGNWARE=y
>> +CONFIG_GMAC_ROCKCHIP=y
>> +CONFIG_PMIC_RK8XX=y
>> +CONFIG_REGULATOR_PWM=y
>> +CONFIG_REGULATOR_RK8XX=y
>> +CONFIG_PWM_ROCKCHIP=y
>> +CONFIG_BAUDRATE=1500000
>> +CONFIG_DEBUG_UART_SHIFT=2
>> +CONFIG_SYSRESET=y
>> +CONFIG_USB=y
>> +CONFIG_USB_XHCI_HCD=y
>> +CONFIG_USB_XHCI_DWC3=y
>> +CONFIG_USB_EHCI_HCD=y
>> +CONFIG_USB_EHCI_GENERIC=y
>> +CONFIG_USB_HOST_ETHER=y
>> +CONFIG_USB_ETHER_ASIX=y
>> +CONFIG_USB_ETHER_ASIX88179=y
>> +CONFIG_USB_ETHER_MCS7830=y
>> +CONFIG_USB_ETHER_RTL8152=y
>> +CONFIG_USB_ETHER_SMSC95XX=y
>> +CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_SPL_TINY_MEMSET=y
>> +CONFIG_ERRNO_STR=y
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 62da168ef86..dbb062edda6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -111,6 +111,7 @@  dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-khadas-edge.dtb \
 	rk3399-khadas-edge-captain.dtb \
 	rk3399-khadas-edge-v.dtb \
+	rk3399-leez-p710.dtb \
 	rk3399-nanopc-t4.dtb \
 	rk3399-nanopi-m4.dtb \
 	rk3399-nanopi-neo4.dtb \
diff --git a/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
new file mode 100644
index 00000000000..f8b2a1d56e7
--- /dev/null
+++ b/arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
@@ -0,0 +1,13 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
new file mode 100644
index 00000000000..32baa57b948
--- /dev/null
+++ b/arch/arm/dts/rk3399-leez-p710.dts
@@ -0,0 +1,645 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Leez RK3399 P710";
+	compatible = "leez,p710", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	dc5v_adp: dc5v-adp {
+		compatible = "regulator-fixed";
+		regulator-name = "dc5v_adapter";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc5v_adp>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host3";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vim-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index f8299d94601..139791795ec 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -24,6 +24,12 @@  S:	Maintained
 F:	configs/khadas-edge-v-rk3399_defconfig
 F:	arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
 
+LEEZ-P710
+M:	Andy Yan <andy.yan@rock-chips.com>
+S:      Maintained
+F:	arch/arm/dts/rk3399-leez-p710-u-boot.dtsi
+F:	configs/leez-rk3399_defconfig
+
 NANOPC-T4
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/leez-rk3399_defconfig b/configs/leez-rk3399_defconfig
new file mode 100644
index 00000000000..4757aaaec44
--- /dev/null
+++ b/configs/leez-rk3399_defconfig
@@ -0,0 +1,58 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-leez-p710"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y