diff mbox series

[v2,4/8] dt-bindings: memory-controllers: Convert Samsung Exynos SROM bindings to json-schema

Message ID 20190918173141.4314-4-krzk@kernel.org
State Not Applicable
Headers show
Series [v2,1/8] dt-bindings: rng: exynos4-rng: Convert Exynos PRNG bindings to json-schema | expand

Commit Message

Krzysztof Kozlowski Sept. 18, 2019, 5:31 p.m. UTC 
Convert Samsung Exynos SROM controller bindings to DT schema format
using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Indent example with four spaces (more readable),
2. Split examples into two,
3. Fix pattern for subnode name,
4. Remove checks for #address-cells-ranges-#size-cells,
5. Add "additionalProperties" so the wrongly named subnodes would be
   matched.
---
 .../memory-controllers/exynos-srom.txt        |  79 -----------
 .../memory-controllers/exynos-srom.yaml       | 128 ++++++++++++++++++
 2 files changed, 128 insertions(+), 79 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml

Comments

Rob Herring Oct. 10, 2019, 9:23 p.m. UTC | #1 
On Wed, 18 Sep 2019 19:31:37 +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos SROM controller bindings to DT schema format
> using json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v1:
> 1. Indent example with four spaces (more readable),
> 2. Split examples into two,
> 3. Fix pattern for subnode name,
> 4. Remove checks for #address-cells-ranges-#size-cells,
> 5. Add "additionalProperties" so the wrongly named subnodes would be
>    matched.
> ---
>  .../memory-controllers/exynos-srom.txt        |  79 -----------
>  .../memory-controllers/exynos-srom.yaml       | 128 ++++++++++++++++++
>  2 files changed, 128 insertions(+), 79 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> 

Applied, thanks.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
deleted file mode 100644
index f633b5d0f8ca..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
+++ /dev/null
@@ -1,79 +0,0 @@ 
-SAMSUNG Exynos SoCs SROM Controller driver.
-
-Required properties:
-- compatible : Should contain "samsung,exynos4210-srom".
-
-- reg: offset and length of the register set
-
-Optional properties:
-The SROM controller can be used to attach external peripherals. In this case
-extra properties, describing the bus behind it, should be specified as below:
-
-- #address-cells: Must be set to 2 to allow device address translation.
-		  Address is specified as (bank#, offset).
-
-- #size-cells: Must be set to 1 to allow device size passing
-
-- ranges: Must be set up to reflect the memory layout with four integer values
-	  per bank:
-		<bank-number> 0 <parent address of bank> <size>
-
-Sub-nodes:
-The actual device nodes should be added as subnodes to the SROMc node. These
-subnodes, in addition to regular device specification, should contain the following
-properties, describing configuration of the relevant SROM bank:
-
-Required properties:
-- reg: bank number, base address (relative to start of the bank) and size of
-       the memory mapped for the device. Note that base address will be
-       typically 0 as this is the start of the bank.
-
-- samsung,srom-timing : array of 6 integers, specifying bank timings in the
-                        following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
-                        Each value is specified in cycles and has the following
-                        meaning and valid range:
-                        Tacp : Page mode access cycle at Page mode (0 - 15)
-                        Tcah : Address holding time after CSn (0 - 15)
-                        Tcoh : Chip selection hold on OEn (0 - 15)
-                        Tacc : Access cycle (0 - 31, the actual time is N + 1)
-                        Tcos : Chip selection set-up before OEn (0 - 15)
-                        Tacs : Address set-up before CSn (0 - 15)
-
-Optional properties:
-- reg-io-width : data width in bytes (1 or 2). If omitted, default of 1 is used.
-
-- samsung,srom-page-mode : if page mode is set, 4 data page mode will be configured,
-			   else normal (1 data) page mode will be set.
-
-Example: basic definition, no banks are configured
-	memory-controller@12570000 {
-		compatible = "samsung,exynos4210-srom";
-		reg = <0x12570000 0x14>;
-	};
-
-Example: SROMc with SMSC911x ethernet chip on bank 3
-	memory-controller@12570000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x04000000 0x20000   // Bank0
-			  1 0 0x05000000 0x20000   // Bank1
-			  2 0 0x06000000 0x20000   // Bank2
-			  3 0 0x07000000 0x20000>; // Bank3
-
-		compatible = "samsung,exynos4210-srom";
-		reg = <0x12570000 0x14>;
-
-		ethernet@3,0 {
-			compatible = "smsc,lan9115";
-			reg = <3 0 0x10000>;	   // Bank 3, offset = 0
-			phy-mode = "mii";
-			interrupt-parent = <&gpx0>;
-			interrupts = <5 8>;
-			reg-io-width = <2>;
-			smsc,irq-push-pull;
-			smsc,force-internal-phy;
-
-			samsung,srom-page-mode;
-			samsung,srom-timing = <9 12 1 9 1 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
new file mode 100644
index 000000000000..cdfe3f7f0ea9
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -0,0 +1,128 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SROM Controller driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The SROM controller can be used to attach external peripherals. In this case
+  extra properties, describing the bus behind it, should be specified.
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos4210-srom
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout with four integer values per bank. Format:
+      <bank-number> 0 <parent address of bank> <size>
+      Up to four banks are supported.
+
+patternProperties:
+  "^.*@[0-3],[a-f0-9]+$":
+    type: object
+    description:
+      The actual device nodes should be added as subnodes to the SROMc node.
+      These subnodes, in addition to regular device specification, should
+      contain the following properties, describing configuration
+      of the relevant SROM bank.
+
+    properties:
+      reg:
+        description:
+          Bank number, base address (relative to start of the bank) and size
+          of the memory mapped for the device. Note that base address will be
+          typically 0 as this is the start of the bank.
+        maxItems: 1
+
+      reg-io-width:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [1, 2]
+        description:
+          Data width in bytes (1 or 2). If omitted, default of 1 is used.
+
+      samsung,srom-page-mode:
+        description:
+          If page mode is set, 4 data page mode will be configured,
+          else normal (1 data) page mode will be set.
+        type: boolean
+
+      samsung,srom-timing:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              minItems: 6
+              maxItems: 6
+        description: |
+          Array of 6 integers, specifying bank timings in the following order:
+          Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+          Each value is specified in cycles and has the following meaning
+          and valid range:
+          Tacp: Page mode access cycle at Page mode (0 - 15)
+          Tcah: Address holding time after CSn (0 - 15)
+          Tcoh: Chip selection hold on OEn (0 - 15)
+          Tacc: Access cycle (0 - 31, the actual time is N + 1)
+          Tcos: Chip selection set-up before OEn (0 - 15)
+          Tacs: Address set-up before CSn (0 - 15)
+
+    required:
+      - reg
+      - samsung,srom-timing
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    // Example: basic definition, no banks are configured
+    memory-controller@12560000 {
+        compatible = "samsung,exynos4210-srom";
+        reg = <0x12560000 0x14>;
+    };
+
+  - |
+    // Example: SROMc with SMSC911x ethernet chip on bank 3
+    memory-controller@12570000 {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x04000000 0x20000   // Bank0
+                  1 0 0x05000000 0x20000   // Bank1
+                  2 0 0x06000000 0x20000   // Bank2
+                  3 0 0x07000000 0x20000>; // Bank3
+
+        compatible = "samsung,exynos4210-srom";
+        reg = <0x12570000 0x14>;
+
+        ethernet@3,0 {
+            compatible = "smsc,lan9115";
+            reg = <3 0 0x10000>;     // Bank 3, offset = 0
+            phy-mode = "mii";
+            interrupt-parent = <&gpx0>;
+            interrupts = <5 8>;
+            reg-io-width = <2>;
+            smsc,irq-push-pull;
+            smsc,force-internal-phy;
+
+            samsung,srom-page-mode;
+            samsung,srom-timing = <9 12 1 9 1 1>;
+        };
+    };