Message ID | 1566869891-29239-5-git-send-email-weifeng.voon@intel.com |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | Add EHL and TGL PCI info and PCI ID | expand |
On 8/26/19 6:38 PM, Voon Weifeng wrote: > EHL DW EQOS is running on a 200MHz clock. Setting up stmmac-clk, > ptp clock and ptp_max_adj to 200MHz. > > Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> > Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> > --- > drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 21 +++++++++++++++++++++ > drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 3 +++ > include/linux/stmmac.h | 1 + > 3 files changed, 25 insertions(+) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > index e969dc9bb9f0..20906287b6d4 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > @@ -9,6 +9,7 @@ > Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> > *******************************************************************************/ > > +#include <linux/clk-provider.h> > #include <linux/pci.h> > #include <linux/dmi.h> > > @@ -174,6 +175,19 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, > plat->axi->axi_blen[1] = 8; > plat->axi->axi_blen[2] = 16; > > + plat->ptp_max_adj = plat->clk_ptp_rate; > + > + /* Set system clock */ > + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, > + "stmmac-clk", NULL, 0, > + plat->clk_ptp_rate); > + > + if (IS_ERR(plat->stmmac_clk)) { > + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); > + plat->stmmac_clk = NULL; Don't you need to propagate at least EPROBE_DEFER here?
On Mon, Aug 26, 2019 at 12:55:31PM -0700, Florian Fainelli wrote: > On 8/26/19 6:38 PM, Voon Weifeng wrote: > > EHL DW EQOS is running on a 200MHz clock. Setting up stmmac-clk, > > ptp clock and ptp_max_adj to 200MHz. > > > > Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> > > Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> > > --- > > drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 21 +++++++++++++++++++++ > > drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 3 +++ > > include/linux/stmmac.h | 1 + > > 3 files changed, 25 insertions(+) > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > > index e969dc9bb9f0..20906287b6d4 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c > > @@ -9,6 +9,7 @@ > > Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> > > *******************************************************************************/ > > > > +#include <linux/clk-provider.h> > > #include <linux/pci.h> > > #include <linux/dmi.h> > > > > @@ -174,6 +175,19 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, > > plat->axi->axi_blen[1] = 8; > > plat->axi->axi_blen[2] = 16; > > > > + plat->ptp_max_adj = plat->clk_ptp_rate; > > + > > + /* Set system clock */ > > + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, > > + "stmmac-clk", NULL, 0, > > + plat->clk_ptp_rate); > > + > > + if (IS_ERR(plat->stmmac_clk)) { > > + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); > > + plat->stmmac_clk = NULL; > > Don't you need to propagate at least EPROBE_DEFER here? Hi Florian Isn't a fixed rate clock a complete fake. There is no hardware behind it. So can it return EPROBE_DEFER? Andrew
> > > +#include <linux/clk-provider.h> > > > #include <linux/pci.h> > > > #include <linux/dmi.h> > > > > > > @@ -174,6 +175,19 @@ static int intel_mgbe_common_data(struct > pci_dev *pdev, > > > plat->axi->axi_blen[1] = 8; > > > plat->axi->axi_blen[2] = 16; > > > > > > + plat->ptp_max_adj = plat->clk_ptp_rate; > > > + > > > + /* Set system clock */ > > > + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, > > > + "stmmac-clk", NULL, 0, > > > + plat->clk_ptp_rate); > > > + > > > + if (IS_ERR(plat->stmmac_clk)) { > > > + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); > > > + plat->stmmac_clk = NULL; > > > > Don't you need to propagate at least EPROBE_DEFER here? > > Hi Florian > > Isn't a fixed rate clock a complete fake. There is no hardware behind it. > So can it return EPROBE_DEFER? > > Andrew Yes, there is no hardware behind it. So, I don't think we need to deferred probe and a warning message should be sufficient. Anyhow, please point it out if I miss out anything. Thanks.
On 8/27/2019 3:38 AM, Voon, Weifeng wrote: >>>> +#include <linux/clk-provider.h> >>>> #include <linux/pci.h> >>>> #include <linux/dmi.h> >>>> >>>> @@ -174,6 +175,19 @@ static int intel_mgbe_common_data(struct >> pci_dev *pdev, >>>> plat->axi->axi_blen[1] = 8; >>>> plat->axi->axi_blen[2] = 16; >>>> >>>> + plat->ptp_max_adj = plat->clk_ptp_rate; >>>> + >>>> + /* Set system clock */ >>>> + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, >>>> + "stmmac-clk", NULL, 0, >>>> + plat->clk_ptp_rate); >>>> + >>>> + if (IS_ERR(plat->stmmac_clk)) { >>>> + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); >>>> + plat->stmmac_clk = NULL; >>> >>> Don't you need to propagate at least EPROBE_DEFER here? >> >> Hi Florian >> >> Isn't a fixed rate clock a complete fake. There is no hardware behind it. >> So can it return EPROBE_DEFER? >> >> Andrew > > Yes, there is no hardware behind it. So, I don't think we need to deferred probe > and a warning message should be sufficient. Anyhow, please point it out if I miss > out anything. Looks good to me, thanks both for clarifying.
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index e969dc9bb9f0..20906287b6d4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -9,6 +9,7 @@ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> *******************************************************************************/ +#include <linux/clk-provider.h> #include <linux/pci.h> #include <linux/dmi.h> @@ -174,6 +175,19 @@ static int intel_mgbe_common_data(struct pci_dev *pdev, plat->axi->axi_blen[1] = 8; plat->axi->axi_blen[2] = 16; + plat->ptp_max_adj = plat->clk_ptp_rate; + + /* Set system clock */ + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, + "stmmac-clk", NULL, 0, + plat->clk_ptp_rate); + + if (IS_ERR(plat->stmmac_clk)) { + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); + plat->stmmac_clk = NULL; + } + clk_prepare_enable(plat->stmmac_clk); + /* Set default value for multicast hash bins */ plat->multicast_filter_bins = HASH_TABLE_SIZE; @@ -193,6 +207,7 @@ static int ehl_common_data(struct pci_dev *pdev, plat->rx_queues_to_use = 8; plat->tx_queues_to_use = 8; + plat->clk_ptp_rate = 200000000; ret = intel_mgbe_common_data(pdev, plat); if (ret) return ret; @@ -233,6 +248,7 @@ static int tgl_common_data(struct pci_dev *pdev, plat->rx_queues_to_use = 6; plat->tx_queues_to_use = 4; + plat->clk_ptp_rate = 200000000; ret = intel_mgbe_common_data(pdev, plat); if (ret) return ret; @@ -438,10 +454,15 @@ static int stmmac_pci_probe(struct pci_dev *pdev, */ static void stmmac_pci_remove(struct pci_dev *pdev) { + struct net_device *ndev = dev_get_drvdata(&pdev->dev); + struct stmmac_priv *priv = netdev_priv(ndev); int i; stmmac_dvr_remove(&pdev->dev); + if (priv->plat->stmmac_clk) + clk_unregister_fixed_rate(priv->plat->stmmac_clk); + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { if (pci_resource_len(pdev, i) == 0) continue; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c index c48224973a37..173493db038c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -194,6 +194,9 @@ void stmmac_ptp_register(struct stmmac_priv *priv) priv->pps[i].available = true; } + if (priv->plat->ptp_max_adj) + stmmac_ptp_clock_ops.max_adj = priv->plat->ptp_max_adj; + stmmac_ptp_clock_ops.n_per_out = priv->dma_cap.pps_out_num; spin_lock_init(&priv->ptp_lock); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 5cc6b6faf359..7ad7ae35cf88 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -168,6 +168,7 @@ struct plat_stmmacenet_data { struct clk *clk_ptp_ref; unsigned int clk_ptp_rate; unsigned int clk_ref_rate; + s32 ptp_max_adj; struct reset_control *stmmac_rst; struct stmmac_axi *axi; int has_gmac4;